Für Profis und Einsteiger
Tascam Portacapture X8 - Linear PCM recorder
With its large touchscreen, 32-bit float resolution to avoid clipping, and tailored modes...
Mehr lesen
Mehr Infos
A new generation of high-resolution PCM recorder
3.5-inch color touchscreen
Up to 192 kHz sampling rate and 32-bit floating point resolution
Two detachable large-diaphragm condenser microphones (14.6 mm), adjustable in AB or XY configuration
Integrated USB audio interface with 8 inputs and 2 outputs
Built-in microphones can be used as a source for audio via USB
Input signals received via USB can be recorded to SD card
Four mic/line inputs via Combo connectors (mixed XLR/TRS jack)
Phantom power (24 or 48 volts) separately switchable on each microphone input
Multi-track recording, up to 8 tracks (6 mono tracks + stereo mix)
Recording in WAV (BWF) or MP3 format
MS decoder, reverb effect (six Room algorithms)
Pre-recording function, allowing you to “catch up” with the few seconds before pressing the record button
Auto-recording function, to start recording depending on the input level
Dual Recording function, allowing each track to be recorded in a different file format
XRI function, allowing recording setting information to be saved with a BWF file
Integrated mixer with audio processing: high-pass filter, compressor, limiter, automatic gain control, noise gate, etc.
Camera/line input for listening to and recording audio signal sent from a camera or other device (3.5mm stereo jack)
Camera/line output with switchable attenuation, to send the audio signal to a camera or other external device
Listening to audio monitoring via headphone output or built-in speaker
Recording media: Micro SD card, up to 512 GB
Powered by 4 AA batteries (alkaline, Ni-MH, Lithium), USB bus or optional AC adapter (Tascam PS-P520U)
3.5-inch color touchscreen
Up to 192 kHz sampling rate and 32-bit floating point resolution
Two detachable large-diaphragm condenser microphones (14.6 mm), adjustable in AB or XY configuration
Integrated USB audio interface with 8 inputs and 2 outputs
Built-in microphones can be used as a source for audio via USB
Input signals received via USB can be recorded to SD card
Four mic/line inputs via Combo connectors (mixed XLR/TRS jack)
Phantom power (24 or 48 volts) separately switchable on each microphone input
Multi-track recording, up to 8 tracks (6 mono tracks + stereo mix)
Recording in WAV (BWF) or MP3 format
MS decoder, reverb effect (six Room algorithms)
Pre-recording function, allowing you to “catch up” with the few seconds before pressing the record button
Auto-recording function, to start recording depending on the input level
Dual Recording function, allowing each track to be recorded in a different file format
XRI function, allowing recording setting information to be saved with a BWF file
Integrated mixer with audio processing: high-pass filter, compressor, limiter, automatic gain control, noise gate, etc.
Camera/line input for listening to and recording audio signal sent from a camera or other device (3.5mm stereo jack)
Camera/line output with switchable attenuation, to send the audio signal to a camera or other external device
Listening to audio monitoring via headphone output or built-in speaker
Recording media: Micro SD card, up to 512 GB
Powered by 4 AA batteries (alkaline, Ni-MH, Lithium), USB bus or optional AC adapter (Tascam PS-P520U)
-
Hilfe,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Finanzierung,
Rufen Sie uns an!
