Symetrix 80-0112-B - xOut 4

Specifications

Analog Inputs

Frequency Response

20 Hz – 20 kHz, ± 0.5 dB.

Channel Separation

> 111 dB @ 1 kHz, +24 dBu.

Connectors

3.5 mm Phoenix connectors.

Number of outputs

Four (4) balanced line level.

Nominal output level

+4 dBu with 20 dB of headroom.

Maximum output level

+24 dBu (+22.8 dBu into a 2k Ohm minimum load).

Output impedance

300 Ohms balanced, 150 Ohms unbalanced.

Dynamic range

> 118 dB, A-weighted.

THD + Noise

< -105 dB, unweighted; 1 kHz @ +22 dBu with 0 dB gain.

Latency

0.60 mS

System

Sampling Rate

48 kHz, ± 100 ppm.

Dante Cable

Standard CAT6, maximum device-to-device length = 100 meters

Mechanical 

Space Required

Half rack unit (WDH: 20.83 cm x 22.86 cm x 4.37 cm / 8.2 in. x 9 in. x 1.72 in.) Depth does not include connector allowance. Allow at least 3 inches additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections.

Electrical

PoE IEEE 802.3af Class 0, 10 Watts maximum. No line voltage switching required (100-250 VAC, 50-60 Hz).

Ventilation

Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.

Certifications or Compliance

UL 60065, cUL 60065, IEC 60065, FCC 15.109:2015, FCC 15.109(g):2015, FCC 15.107:2015, (CISPR 32), EN 55032:2012, EN 55103-2:2009, EN 61000-3-3:2013, EN 61000-3-2:2006, ICES-003:2012, RoHS