Symetrix 80-0090-B - xOut 12

Specifications

General 

Sampling rate

48 kHz, ± 100 ppm.

Frequency response (D/A)

20 Hz – 20 kHz, ± 0.5 dB.

Channel separation (D/A)

> 111 dB @ 1 kHz, +24 dBu.

Dante cable

Standard CAT6, maximum device to device length = 100 meters.

Connectors

3.81 mm terminal blocks.

Number of outputs

Twelve (12) balanced line level.

Nominal output level

+4 dBu with 20 dB of headroom.

Maximum output level

+24 dBu (+22.8 dBu into a 2k Ohm minimum load).

Output Impedance

300 Ohms balanced, 150 Ohms unbalanced.

Dynamic Range

> 118 dB, A-weighted.

THD+Noise

< -105 dB, unweighted; 1 kHz @ +22 dBu with 0 dB gain.

Latency

0.60 mS

Mechanical 

Space Required

1U (WDH: 18.91 in x 9.5 in x 1.72 in / 48.02 cm x 24.13 cm x 4.37 cm). Depth does not include connector allowance. Allow at least 3 inch additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections.

Electrical

100-240 VAC, 50/60 Hz, 25 Watts maximum universal input. No line voltage switching required.

Ventilation

Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in. minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.