White Bushing for PX-Series
Brown Bushing for PX-Series
Red Bushing for PX-Series
Orange Bushing for PX-Series
2 pole horizontal 1/4 inches jack, all contacts switched, chrome ferrule nut
1/4 inch mono jack, switched, fully threaded nose, sleeve contact/frontpanel connection
TINY XLR bushing and chuck for cable diameters 4.0 - 5.0 mm
The dummyPLUG NDM for male XLR receptacles enables you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.
1/4 inch mono jack, switched, fully threaded nose
Red Coding Ring Xx-Serie Neon
Yellow Coding Ring Xx-Serie Neon
Green Coding Ring Xx-Serie Neon
Blue Coding Ring XX-Serie Neon
White Coding Ring XX Series Neon
Blue Bushing for NL4FC
Metallized plastic connection module, outer thread M 17x1
The dummyPLUG NDF for female XLR receptacles enable you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.
The KIMEX 064-1010 Audio cable connects two devices equipped with a 3.5mm jack input (computer, mobile phone) for an audio connection.
3 pole horizontal 1/4 inches jack, all contacts switched, plastic housing with nut and washer
2 pole horizontal 1/4 inches jack, all contacts switched, plastic housing with nut and washer
Brown ring with flat label surface for PX-Series
Nickel plated metal ring nut
Orange ring with flat label surface for PX-Series
Red ring with flat label surface for PX-Series
Blue ring with flat label surface for PX-Series
Violet ring with flat label surface for PX-Series
Green ring with flat label surface for PX-Series
Yellow ring with flat label surface for PX-Series
White ring with flat label surface for PX-Series
Grey ring with flat label surface for PX-Series
Yellow coding ring with labeling block for X-Series
White coding ring with labeling block for X-Series
Brown coding ring with labeling block for X-Series
Grey coding ring with labeling block for X-Series
Orange coding ring with labeling block for X-Series
Violet coding ring with labeling block for X-Series
Blue coding ring with labeling block for X-Series
Green coding ring with labeling block for X-Series
Red coding ring with labeling block for X-Series
White Bushing for NP3TT-1
Black coding ring for XX-Series
Blue Bushing for NP3TT-1
Green Bushing for NP3TT-1
Blue Bushing for NP3TT-P
Green Bushing for NP3TT-P
Yellow Bushing for NP3TT-P
Red Bushing for NP3TT-P
Brown coding ring for XX-Series
Red Bushing for NP3TT-1
Transparent coding ring which allows an individual customized labeling, branding, coding etc. Just place an individual coloured and or lettered paper or tape (eg. Brothers) inside the ring.
Green coding ring for XX-Series
Yellow coding ring for XX-Series
Orange coding ring for XX-Series
Red coding ring for XX-Series
Grey coding ring for XX-Series
Violet coding ring for XX-Series
Blue coding ring for XX-Series
White coding ring for XX-Series
BLACK CODING RING > X-SERIES
Replacement crimp contact for the NC3FXX-HA cable connector and the NC3FD-LX-HA receptacle
Replacement crimp contact for the NC3MXX-HA cable connector and the NC3MD-LX-HA receptacle
Faston receptacle for tabs with "positive lock", Tab Fit 4.75 x 0.51 mm (0.187 x 0.02 in), Equivalent to AMP
Ring nut, knurled, nickel-plated brass
Brown Bushing for NP3TT-1
Gray Bushing for NP3TT-1
Violet Bushing for NP3TT-1
Yellow Bushing for NP3TT-1
Brown Bushing for NP3TT-P
Orange Bushing for NP3TT-1
Black Bushing for NP3TT-1
White Bushing for NP3TT-P
Gray Bushing for NP3TT-P
Violet Bushing for NP3TT-P
Orange Bushing for NP3TT-P
Hexagonal black plastic nut
Hexagonal metal nut (for metal screw jack only)
Cover plate for cable reel type KTGT450.OF with 24x cut-outs for D-series chassis connectors.