Für Profis und Einsteiger
The RB-SM2 is a dual version of the RB-SM1, consisting of two independent converters which will produce two fully buffered and balanced mono line outputs from two stereo inputs.
All connections are on the rear panel. The XLR-3 inputs are electronically balanced with an impedance of 20kΩ bridging. These can be wired unbalanced to accept an output from domestic equipment.
The XLR-3 line outputs are electronically balanced with an output impedance of <50Ω. The outputs can be wired unbalanced by grounding the non-phase signal, allowing you to feed both balanced and unbalanced equipment.
Output gain adjustment using pre-set potentiometers for both converters allows a normalised mono output from domestic stereo equipment. The potentiometers are accessible through the rear panel.
Technical Specification For RB-SM2 |
|
Audio Specification |
|
Maximum Input Level: |
+28dBu |
Maximum Output Level: |
+28dBu |
Input Impedance: |
>20kΩ balanced bridging |
Output Impedance: |
<50Ω balanced |
Frequency Response: |
20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz) |
Gain Range: |
Adjust -8dB to +18dB gain, ref. 0dB input on L and R |
Common Mode Rejection: |
>66dB typically |
Distortion: |
0.01% THD @ 1kHz, ref +8dBu output |
Noise: |
-100dB, unity gain, ref +8dBu output |
|
|
Connections |
|
Inputs: |
4 x XLR 3 pin female (Balanced, can be unbalanced) |
Outputs: |
2 x XLR 3 pin male (Balanced, can be unbalanced) |
Mains Input: |
Filtered IEC, switchable 110-120V, or 220-240V, fused, 6W max |
Fuse Rating: |
Anti-surge fuse 100mA 20 x 5mm (230VAC) |
|
|
Equipment Type |
|
RB-SM2: |
Dual stereo to mono converter |
|
|
Physical Specification |
|
Dimensions (Raw): |
28cm (W) x 10.8cm (D) x 4.2cm (H) (1U) |
Dimensions (Boxed): |
36cm (W) x 20.5cm (D) x 6cm (H) |
Weight: |
Nett: 1.05kg Gross: 1.50kg |
-
Hilfe,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Finanzierung,
Rufen Sie uns an!
