Fohhn PT-70 Top - Cardioid High Performance Speakers, 60x50

1003561

Neu

Cardioid High Performance Speakers 2x12 "60x50
Rectangle
Garantie: garantie Visuals Garantie: 36 Monate
Interner Service: Revision, Reparatur & Backup.

1003561
Mehr Infos  

Fohhn Cardioid High Performance Speakers, 60x50



Horn-loaded. Cardioid. Plug & Play.


Fohhn expands its Perform-Series with the PT-70 – a high performance, 2-way loudspeaker system with cardioid functionality that has been specially developed for concert sound and touring applications. The new loudspeaker makes an ideal sound system for concerts in tents, halls and clubs, or for town festivals and smaller open-air events. It also acts as a solid extension for line arrays and large Beam Steering systems. For the rental market, the PT-70 has many applications as a multifunctional loudspeaker system. The PT-70 contains two 12“ chassis with compression chamber and horn, plus a 1.4“ compression driver with CD horn. It features a passive crossover which splits up the loudspeaker's audio signal. An Intelligent Protection Circuit (IPC), a voltage-controlled semiconductor circuit, protects the high frequency driver from overload - quickly and reliably. The loudspeaker system also features Convertible Dispersion Technology (CDT), which is registered as a utility model. This technology enables the PT-70 to be switched between cardioid and vented operation. In cardioid mode, the sound dispersion at low-mid range frequencies is effectively reduced at the system's back. Thus first-class sound reproduction and speech intelligibility are ensured. The PT-70 has been solely developed for operation with Fohhn speaker presets - especially with Fohhn Class D amplifier D-2.1500: The system's equalizing occurs within the Fohhn DSP, which also includes all of the protective functions that required for a safe operation. Together with this amplifier and Fohhn subwoofers, the PT-70 delivers excellent results.



Features:

- Two variants: 90° or 60° horizontal sound dispersion

- Fully horn-loaded passive loudspeaker, 2-way

- Components: 2 × 12“ with horn and compression chamber / 1 × 1.4” on CD-Horn

- 2-way split with passive crossover including IPC high frequency protection

- Effective side lobe suppression through a midrange waveguide

- Switchable between cardioid and vented operation (Convertible Dispersion Technology (CDT))

- In cardioid mode: effective reduction of low-mid rear sound

- Maximum SPL: 140 dB

- Low weight (39 kg)

- Steel braced birch plywood housing

- Front grille in housing colour – with acoustic foam behind

- Supplied as standard with black, weatherproofed polyurethane coating that includes UV protection and waterproofed membrane

- Available in all RAL Classic colours

- Well designed mounting system for tripod use and flown applications (2 × Quicklock locks for flying brackets and AEROQUIP flying tracks, 2 × eyelets for safety)

- Equipped with 2 × Neutrik NL4 Speakon connectors



Horn-loaded, passive loudspeaker system with 2-way technology

Horn-loaded, passive loudspeaker system with 2-way technology, equipped with two 12” low-mid chassis in compression chamber, horn loaded and with a 1.4” high frequency compression driver. Fully neodymium. The loudspeaker system has a Constant Directivity Horn with a defined beam dispersion of either 90° x 50° or 60° x 50°. The system is also equipped with an integrated, phase-optimized crossover with active, semiconductor circuit (IPC technology) for high frequency driver protection. The loudspeaker system can be manually switched between cardioid and vented operation. It also has a mid-range waveguide system for suppressing unwanted side lobes in the vertical acoustic axis.The loudspeaker housing is made from multiplex birch plywood, with steel brace reinforcement and a black, scratch-resistant polyurethane coating. Can be supplied, on request, in all RAL Classic colours. Optionally available with a polyurethane coating that has an additional UV protective layer and waterproof membrane for increased protection against environmental impact, weather and mechanical wear and tear. For tripod use and flown applications, the loudspeaker system is equipped with two suspension fittings for Quicklock flying brackets and AEROQUIP rigging hardware, as well as two ring eyelets for safety. Connections: two Neutrik NL4 Speakon.

 


 



Specifications



 



Electroacoustic Features



 



Acoustic design



Horn-loaded passive speaker system, 2-way, vented, CDT (Convertible Dispersion Technology – switchable between cardioid and vented operation), sidelobe suppression by means of a midrange-waveguide



Components



2 x 12" long excursion speakers working in compression chamber and horn, 1.4” compression driver on CD horn with self-resetting IPC[*]-HF protection, neodymium magnets



Power rating (nominal)



900 W



Power rating (program)



1800 W



Power rating (peak)



3600 W



Maximum SPL



140 db



Frequency range



52 Hz – 20 khz



Nominal dispersion (h x v)



90° x 50° or 60° x 50°



Nominal impedance



4 Ohms



Features



 



Enclosure



Multiplex birch plywood, reinforced with steel braces



Protection grille



Steel, ball impact resistant, powder coated



Rigging points



2 x suspension rail for Quicklock flying bracket and AEROQUIP rigging hardware, 2 x eyebolt for safety



Connections



2 x Neutrik NL4 Speakon connectors



Standard colours



Scratch-proof polyurethane coating, black



Front design



Hexagonally perforated steel grille, backed by acoustically transparent foam



Dimensions (W x H x D)



400 x 800 x 450 mm



Weight



Approx. 39 kg



Optional features



 



Optional colours



All RAL Classic colours



Weather protection



Polyurethane coating with additional UV-resistant finish, water-repellent speaker cone impregnation





 
Zubehör
Verschiedene Support Audio
Taschen Audiozubehör
    Hilfe,
    Finanzierung,
    Rufen Sie uns an!

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menü