UltraPAK Transceivers
The UltraPAK is a ergonomic belt pack radio that can be integrated into Eartecs UltraLITE full duplex wireless series. These compact digital transceivers have been designed specifically for those users that need hands free, voice communication and also require a lightweight, headset accessory.
UltraPAK transceivers weigh only 2.5 oz and feature an ergonomic design so they fit comfortably when belt worn. They include volume control adjustment and a mic mute button with LED indicator that illuminates when gain is set to standby. The field replaceable Lithium battery charges externally and operates for up to 6 hours in full duplex mode.
SST Headset
The "Secret Service Type" Headset is the most diminutive in the Eartec product line. Instead of a headband these lightweight headsets include a flexible, clear audio tube with an earbud. The SST can be a valuable tool in a multitude of applications. Customers currently using the SST run the gamut from ice hockey coaches and equestrian riding instructors to church production teams.
|
Specification
|
|
SST Headset
|
|
Compatibility
|
HUB Mini Base and UltraLITE headsets
|
Type
|
Over-ear
|
Microphone
|
Electret condenser
|
Frequency Response
|
20Hz to 20kHz
|
Impedance
|
16 Ohms
|
Sensitivity
|
105 +/- 5 dB
|
Speaker
|
Diameter: 1.2" (3.05cm)
Type: Mylar
|
Connector
|
2.5mm, 3.5mm two-pin molded plug
|
Input
|
20 mW
|
Cable Length
|
3' (0.91m)
|
Weight
|
5.0 oz (141.75g)
|
Field Replaceable Lithium Battery
Each UltraLITE wireless headset comes complete with a rechargeable Lithium battery that is installed in a special compartment of the headset plastics. The batteries are lightweight and only about the size of a book of matches. They charge in approximately 3 hours and operate the headset for 6 hours. Since they are removable and are charged externally in the Multi-Port charger, they can be changed out in seconds.
Multi-Port Charger
All complete UltraLITE wireless systems include a Multi-Port charger (either 2 or 8 port) that charge the headset batteries in individual bays. When each battery reaches full charge the corresponding LED turns from red to green indicating that the battery is ready to go. This feature allows users to have extra batteries on hand in the charger whenever necessary.
|
Specification
|
|
Charging Base
|
|
For Use with
|
8x UltraLITE, UltraPAK and HUB batteries
|
Charge Time
|
Approximately three hours
|
Input Power
|
100 to 240 VAC
|
Softside Case
Eartec's Softside Case is included to keep your wireless system stored safely. Constructed of waterproof nylon this headset bag/case includes internal compartments so the headsets stay organized. There is also a pocket with hook and loop enclosure for the charger and any spare batteries. The molded hard plastic handle makes transport easy and convenient for "On Location" work.
|
Specification
|
|
HUB Base Master
|
|
Standard
|
DECT 6.0 (Digital Enhanced Cordless Telecommunications)
|
Frequency
|
1920-1930MHz (USA)
|
Euro Frequency
|
1880-1900MHz (EURO)
|
Connector
|
2.5mm, 3.5mm Plug-in
|
Channel Bandwidth
|
1.728 GHz
|
Modulation Type
|
GFSK
|
Transmission Speed
|
1.152 Mbps (Baud Rate)
|
Duplexing
|
Time Division Duplex (TDD)
|
Speech Encoding
|
ADPCM / 32bit/s
|
RF Accessing
|
Time Division Multiple Access (TDMA)
|
Range
|
400m in open space
|
Headset Power Supply
|
Rechargeable Lithium (3.7V, 800mAh, 3.0Wh)
|
Charger Power Supply
|
AC/Adapter: Input: 110-40Vac
Output: 5.0V - 1 (1000mA)
|
Charge Time
|
3 hours
|
Operation Time
|
4 hours
|
Storage Temperature
|
-10 to 60 deg. C (14 to 140 deg. F)
|
Dimensions (WxDxH)
|
5.5 x 1.5 x 3.75" (13.97 x 3.81 x 9.53cm)
|
Weight
|
4 oz (113.40g)
|