Audio Limited enclosure for wireless microphone receivers
The A10-RACK offers convenient mounting, powering, RF, and audio connectivity for four uni- or SuperSlot wireless receivers in its 1 RU chassis. It is designed for dual-channel receivers from Audio Limited, including the A10-RX, plus slot receivers from Lectrosonics and Wisycom. The A10-RACK includes built-in antenna distribution with powering for active antennas. Up to eight channels of audio from single or dual-channel receivers appear on both its XLR outputs and over Dante™ audio-over-Ethernet.
- accepts up to four, two-channel wireless receivers (receivers sold separately)
- audio output on analogue/AES3 and Dante
- built-in power distribution
- built-in antenna distribution with selectable power for active antennas
- powered from 4-pin XLR input (10-18 VDC)
- USB port for firmware updates and serial access
Dante™ audio networking offers the convenience of a single CAT5 Ethernet connection to carry the audio signal from the eight channels of the A10-RACK. Dante is alway active, whether the receiver is set for analogue or AES digital output. When used with other Dante-compatible devices, complex systems with comprehensive routing can be built. Monitoring and routing of signals from transmitters to receivers is simplified with Dante Controller, a free software application from Audinate.
The A10-RACK has an integrated RF distribution amplifier. Its two RF inputs offer selectable 12 V powering for active antennas, plus loop-thru connections for another A10-RACK. A single pair of antennas can be used for up to 16 audio channels.
The A10-RACK is powered from standard 4-pin XLR, 10-18 VDC power supplies, such as Sound Devices XL-WP4 (shown right). Power supplies require 3 amps (minimum) for proper powering of the A10-RACK and connected slot receivers.
The Audio Limited A10-RACK is compatible with Wavemark’s Wavetool for iOS and Mac. Wavetool uses a computer, phone or tablet to display key information for the A10-RX, such as RF status, RF frequency, TX battery levels, and audio signal history. With many features in one application, Wavetool makes it easy to troubleshoot issues remotely.
RF Frequency Range
Number of Receivers
four two-channel, diversity receivers
Active Distribution Amplifier Bandwidth
224 MHz, with powering for active antennas (12 V, 200 mA)
2 x BNC 50 Ohms
2 x BNC 50 Ohms
10–18 Volts DC, 3 amps via 4-pin XLR male
8 x 3 pin XLR-M (analogue and/or AES3)
2 x RJ45 to provide Dante™ primary and secondary
+18 dBu maximum, balanced
Audio Frequency Response
20-20,000 Hz ±1 dB
USB type B
Dimensions (H x W x D)
442 mm x 210 mm x 45 mm (without rack ears), 1 RU
Weight (without receivers)