Für Profis und Einsteiger
Tilta WLC-T03-K5 - Tilta Nucleus-M Wireless Lens Control System Partial Kit V
Tilta Nucleus-M Wireless Lens Control System Partial Kit V
The Nucleus-M is a revolutionary and highly customizable 3-channel wireless lens control system. It allows you to have full control of focus, iris, and zoom on either the FIZ hand unit or between the two wireless hand grips. You can even split control of the channels between the hand unit and wireless hand grips as you see fit with the push of a button.
The wireless range of both the hand unit and hand grips is 1,000 feet and with the planned upcoming transmission upgrade, the range can reach up to 1 1/4 miles! This makes it ideal for drone or car-mounted shots.
Each motor has its own built-in motor drive that communicates directly with the hand unit and hand grips. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Simply set the motors and hand unit/hand grips to the same channel and you will have full control.
The motors allow for automatic calibration of the lens as well as manual calibration if you are using lenses that don't have hard end stops at close focus and infinity.
This clamp-on design allows you to easily attach and detach the motors without needing to remove any other accessory from your setup. Every motor has a 0.8 mod, 35 tooth, 32 pitch gear attached, which is the standard gear size for cinema lenses. The torque of the Nucleus-M Motor at 14.8V is 2.5N m
To power the motors, only one power port on your camera rig needs to be used. Simply plug the P-tap power cable into one of the motors and then daisy chain power to the rest of the motors with the short 7-pin to 7-pin cables. The motors can be powered through a power source that has a voltage output ranging from 7.2V-24V.
When fully charged, the batteries in the hand grips last up to 2 days, while in the hand unit they last up to 10 hours.
Remote start/stop is possible by plugging a compatible Nucleus-M R/S cable into the open 7-pin port of a motor. This then gives you R/S capabilities through the hand unit and/or the handles.
|
Specifications |
|
Handgrip (Left) |
|
|
Current |
0.1 A |
|
Voltage |
Battery: 7.2 V |
|
Port |
Power/Communication: 4-pin |
|
Rotation |
85, 180, 310 Degree |
|
Battery Type |
18650 |
|
Operating Frequency |
2.4 GHz |
|
Emission Power |
10-100 MW |
|
Maximum Transmission Distance |
33-328' (10-100m) |
|
Operating Temperature Range |
-4 to 122 Degree F (-20 to 50 Degree C) |
|
Material of Construction |
Aluminum alloy, stainless steel |
|
Dimensions |
With Thumb Unit: 6.9 x 3.3 x 2.3" (17.6 x 8.5 x 6cm) |
|
Weight |
With Thumb Unit: 12.5 oz (355g) |
|
Handgrip (Right) |
|
|
Current |
0.1 A |
|
Voltage |
Battery: 7.2 V |
|
Port |
Power/Communication: 4-pin |
|
Rotation |
85, 180, 310 Degree |
|
Battery Type |
18650 |
|
Operating Frequency |
2.4 GHz |
|
Emission Power |
10-100 MW |
|
Maximum Transmission Distance |
33-328' (10-100m) |
|
Operating Temperature Range |
Aluminum alloy, stainless steel |
|
Dimensions |
With Thumb Unit: 6.9 x 3.3 x 2.3" (17.6 x 8.5 x 6cm) |
|
Weight |
With Thumb Unit: 12.5 oz (355g) |
|
FIZ Lens Control Motor |
||
Gear Mod |
0.8 |
|
Gear Pitch |
32 |
|
Number of Gear Teeth |
35 |
|
Face Width |
0.4" (10mm) |
|
Operating Frequency |
2.4 GHz |
|
Maximum Range |
1640' (500m) (unobstructed) |
|
Emission Power |
30-100 MW |
|
Current |
Quiescent: 0.10 A, 14.8 V |
|
Voltage |
7.2-24 V |
|
Rod Compatibility |
19, 15 mm |
|
Noise |
15 dB |
|
Operating Temperature Range |
-4 to 122 Degree F (-20 to 50 Degree C) |
|
Material of Construction |
Aluminum alloy, stainless steel, ABS plastic |
|
Dimensions |
4.50 x 3.25 x 1.38" (11.43 x 8.26 x 3.49cm) |
|
Weight |
6.7 oz (190g) (motor only) |
|
DSLR Lens Follow Focus Adapter |
||
Material of Construction |
Silicone and plastic |
|
Compatibility |
Tilta Nucleus-M, Nucleus-Nano |
|
D-Tap to 7-Pin Motor Power Cable |
||
Connectors |
D-Tap, 7-pin LEMO-type |
|
Length |
23" (58.4cm) |
|
Weight |
1.1 oz (32g) |
|
ARRI-Standard Rosette Adapters |
||
Material of Construction |
Aluminum alloy, stainless steel |
|
Dimensions (LxWxD) |
2.3 x 2 x 1.5" (5.7 x 5.1 x 3.8cm) |
|
Weight |
2.5 oz (72g) |
|
-
Tilta WLC-T03-MD-1 - Nucleus-M...
8,36 CHF exkl. MwSt
9,04 CHF mit MwSt
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
- +
-
-
-
Tilta WLC-T03-WSC - Nucleus-M...
97,49 CHF exkl. MwSt
105,39 CHF mit MwSt
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
- +
-
Tilta WLC-T03-FIZ - Nucleus-M...
425,26 CHF exkl. MwSt
459,71 CHF mit MwSt
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
- +
-
-
Tilta RS-02-SY - Nucleus M Sony...
68,80 CHF exkl. MwSt
74,37 CHF mit MwSt
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
- +
-
Hilfe,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Finanzierung,
Rufen Sie uns an!
