Für Profis und Einsteiger
Rotolight RL48-WVK - Ultimate Vlogging Kit
Mehr Infos
Rotolight Ultimate Vlogging Kit
The Rotolight Ultimate VLogging Kit is well suited for the smartphone-toting Vlogger, YouTuber, content creator, or makeup artist as the compact light mounts next to your smartphone thanks to the included kit components. The accessory mounting bar and smartphone clip allow you to mount your smartphone onto one end of the accessory bar, while the stand adapter allows you to mount the RL48 onto the other side, creating a compact camera and lighting setup. This provides a soft and beautiful light for your face as you speak to your audience through your smartphone.
The accessory bar mounts on the included desktop tripod, which has a ball head that allows you to adjust the level and tilt of your setup to compensate for your environment. You can also close the legs of the mini tripod, to use it as a handgrip for handheld shooting with your setup. The kit includes four filters, a full CTO to convert the light's output from daylight to tungsten, a half CTO filter for mixed light source use, and two diffusion filters to soften the light's output. The light fixture runs on three AA batteries.
Rotolight RL48-B LED RingLight Stealth Edition
The Rotolight RL48-B LED RingLight Stealth Edition sports 48 ultra-bright Grade-A LEDs with an 80W equivalent. It can be attached onto camcorders and DSLRs for up to 4 hours of continuous light without causing shadows or red eye.
Weather-resistant, weighing 6 oz, and powered by 3x AA batteries, it can be set up and fully functional within 3 seconds. Batteries are not included.
Features
- Slides onto and firmly stays put on most shotgun mics. Or, with the use of a Rotolight stand (not included), it can mount onto DSLRs, camcorders, and other equipment via hot shoe or 1/4" - 20 stud.
- Contains a Filter-Holder. Included with every RingLight are 3 CTO filters and 3 ND filters which adjust color to 6300K, 5600K, and 4300K and 3200K.
- 110° beam angle produces a soft, naturally diffuse wide beam that eliminates shadows and red eye.
- Can be accurately dimmed over 1.5 stops with the use of included ND filters. A 1 stop and a .5 stop combine using two filters, one for each.
- A rubberized outer coating reduces reflectivity and acoustic resonance.
- Can close in on a subject as close as 1.5".
Rotolight Rotopod Tripod
The Rotolight Rotopod Tripod is a compact tabletop support with a built-in ball head that has a 1/4"-20 threaded camera mount and a load capacity of 3.1 lb. Splaying the 1-section legs out, the 6.7 oz mini tripod has a stance of 5.7" and a folded length of 7.1", so it conveniently fits in your back pocket or your camera bag. With the threaded camera mount, you can easily mount mirrorless and compact cameras as well as smartphones with the included smartphone adapter. The NEO 1 and 2 and RL48 lights are also compatible with the Rotopod to place them remotely and light up a scene or your subject.
The Rotolight Ultimate VLogging Kit is well suited for the smartphone-toting Vlogger, YouTuber, content creator, or makeup artist as the compact light mounts next to your smartphone thanks to the included kit components. The accessory mounting bar and smartphone clip allow you to mount your smartphone onto one end of the accessory bar, while the stand adapter allows you to mount the RL48 onto the other side, creating a compact camera and lighting setup. This provides a soft and beautiful light for your face as you speak to your audience through your smartphone.
The accessory bar mounts on the included desktop tripod, which has a ball head that allows you to adjust the level and tilt of your setup to compensate for your environment. You can also close the legs of the mini tripod, to use it as a handgrip for handheld shooting with your setup. The kit includes four filters, a full CTO to convert the light's output from daylight to tungsten, a half CTO filter for mixed light source use, and two diffusion filters to soften the light's output. The light fixture runs on three AA batteries.
Rotolight RL48-B LED RingLight Stealth Edition
The Rotolight RL48-B LED RingLight Stealth Edition sports 48 ultra-bright Grade-A LEDs with an 80W equivalent. It can be attached onto camcorders and DSLRs for up to 4 hours of continuous light without causing shadows or red eye.
Weather-resistant, weighing 6 oz, and powered by 3x AA batteries, it can be set up and fully functional within 3 seconds. Batteries are not included.
Features
- Slides onto and firmly stays put on most shotgun mics. Or, with the use of a Rotolight stand (not included), it can mount onto DSLRs, camcorders, and other equipment via hot shoe or 1/4" - 20 stud.
- Contains a Filter-Holder. Included with every RingLight are 3 CTO filters and 3 ND filters which adjust color to 6300K, 5600K, and 4300K and 3200K.
- 110° beam angle produces a soft, naturally diffuse wide beam that eliminates shadows and red eye.
- Can be accurately dimmed over 1.5 stops with the use of included ND filters. A 1 stop and a .5 stop combine using two filters, one for each.
- A rubberized outer coating reduces reflectivity and acoustic resonance.
- Can close in on a subject as close as 1.5".
Rotolight Rotopod Tripod
The Rotolight Rotopod Tripod is a compact tabletop support with a built-in ball head that has a 1/4"-20 threaded camera mount and a load capacity of 3.1 lb. Splaying the 1-section legs out, the 6.7 oz mini tripod has a stance of 5.7" and a folded length of 7.1", so it conveniently fits in your back pocket or your camera bag. With the threaded camera mount, you can easily mount mirrorless and compact cameras as well as smartphones with the included smartphone adapter. The NEO 1 and 2 and RL48 lights are also compatible with the Rotopod to place them remotely and light up a scene or your subject.
|
Specifications |
|
RL48-B LED RingLight Stealth Edition |
||
Light Fixture |
|
|
Number of LEDs |
48 |
|
Power |
|
|
Battery Plate |
3 x AA |
|
Physical |
|
|
Weight |
6 oz / 90 g |
|
Rotopod Tripod |
|
|
Head |
|
|
Head Type |
Ball Head |
|
Camera Mounting Screw |
1/4"-20 Male |
|
Quick Release Plate Type |
No Quick Release |
|
Friction Control |
No |
|
Independent Pan Lock |
No |
|
Pan & Tilt Range |
|
|
Vertical Tilt |
0° to +90° |
|
Panning Range |
360° |
|
General |
|
|
Load Capacity |
3.1 lb / 1.41 kg |
|
Maximum Working Height |
5.7" / 14.4 cm |
|
Minimum Working Height |
5.7" / 14.4 cm |
|
Bubble Level |
No |
|
Materials |
Plastic |
|
Weight |
6.7 oz / 190 g |
|
Legs |
|
|
Leg Positions |
1 Position |
|
Independent Leg Spread |
No |
|
Leg Sections |
1 |
|
-
Hilfe,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Finanzierung,
Rufen Sie uns an!
