52262
Neu
The RB-DA24MD is a 1U rack mount high performance 24 way audio distribution amplifier. It has 2 inputs which can be each individually routed to 12 outputs, or mixed and routed to all 24 outputs. The inputs can be configured as either dual mono, input 1 routed to outputs 1-12 and input 2 routed to outputs 13-24, or mixed-mono, inputs 1 and 2 mixed at a pre-set level and routed to all 24 outputs. When set to mixed-mono operation there are 3 different output mix level modes, enabled by altering internal jumpers, providing -6dB, -3dB or 0dB adjustment of the output.
The XLR inputs and D-type outputs are electronically balanced and can be wired unbalanced. Each output is individually buffered so that a short circuit on one won’t affect the others. Each output is also protected against connection to both POE (power over Ethernet) and phantom power circuits.
The RB-DA24MD has master gain controls for both input 1 and input 2 which are pre-set potentiometers accessible through the rear panel. These controls allow the gain to be adjusted from -15dB to +15dB, useful for normalising consumer to professional signals and vice versa. An LED power indicator on the front panel shows that the unit is powered.
A 125Hz 6dB per octave roll off filter is activated by a push switch on the rear panel. When selected the filter is the applied to both inputs.
Technical Specification For RB-DA24MD |
|
Audio Specification |
|
Input impedance: |
>20kΩ bridging (balanced) |
Output impedance: |
<50Ω |
Maximum Input Level: |
+28dBu |
Maximum Output Level: |
+28dBu |
Frequency Response: |
20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz) |
Gain Range: |
Adjustable -15dB loss to +15dB gain |
Common Mode Rejection: |
>66dB typically |
LF Roll Off Filter : |
125Hz at 6dB/octave |
Distortion: |
0.01%THD @ 1kHz, red + 8dBu output |
Noise: |
-100dB unity gain, ref +8dBu output |
|
|
Connections |
|
Inputs: |
2 x XLR 3 pin female (balanced) |
Outputs: |
2 x 25 way D-type plug (balanced, can be unbalanced) |
Mains Input: |
Filtered IEC, switchable 110-120V, or 220-240V, fused, 12W maximum |
Fuse Rating: |
Anti-surge fuse 100mA 20 x 5mm (230VAC) |
|
|
Equipment Type |
|
RB-DA24MD: |
24 way mono distribution amplifier |
|
|
Physical Specification |
|
Dimensions (Raw): |
48cm (W) x 15.8cm (D) x 4.2 (H) (1U) |
Dimensions (Boxed): |
58.5cm (W) x 27.4cm (D) x 10.8cm (H) |
Weight: |
Nett: 1.6kg Gross: 2.2kg |