For professionals and enthusiasts alike.
Symetrix 80-0114-B - Prism 4x4
Dante in Our DNA
Prism DSPs are equipped with 128 (64×64) Dante channels. The Dante protocol enables ultra-reliable multi-channel audio networking over IP. Together, Symetrix and Dante provide the fastest possible way to implement, control, and maintain a system of networked DSPs and accessories – including third party Dante-enabled microphones, loudspeakers, power amps, and mixing consoles.
Scaling Up
A Prism system’s analog input and output count may be increased using Symetrix Dante-enabled xIn 4, xIO 4×4, xOut 4, xIn 12, and xOut 12 analog I/O expanders.
Unlimited Programming Flexibility
Prism is programmed using Composer – Symetrix’ award winning open-architecture CAD application. Unique to Composer is the ability to natively configure Symetrix and select third party Dante hardware – thereby eliminating the confusion of multiple or redundant software applications. Learn more about Composer here.
Control Made Easy
Multiple control options include low-cost Symetrix ARC wall panels and an easy to generate SymVue Windows virtual GUI. The human readable Composer Control Protocol supports programming of third-party touch screens and control devices.
An Embedded Web Server for Status and Even More Control
Prism’s embedded web server displays I/O levels, diagnostics data, and hosts ARC-WEB – a browser-based interface for smart phones, tablets, and computers.
Form, Fit and Function
Prism 8×8, 12×12 and 16×16 have been designed using standard 19” x 1U enclosures. For convenient point-of-use or rack mounting, Prism 0x0 and 4×4 feature 1/2 rack 1U form factors.
Features
- DSP Price / Performance Breakthrough
- 128 Channel (64×64) Dante
- 0x0, 4×4, 8×8, 12×12, and 16×16 Versions
- DSP Processing Identical to Radius / Edge / Solus NX
- Delay Memory Identical to Radius / Edge / Solus NX
|
Specifications |
|
Analog Inputs |
|
|
Number of Inputs |
Four (4) switchable balanced mic or line level. |
|
Connectors |
3.81 mm terminal blocks. |
|
Nominal Input Level |
+4 dBu. |
|
Maximum Input Level |
+23 dBu. |
|
Mic Pre-amp gain |
0, 12, 24, 44 or 54 dB switchable with ± 24 dB trim. |
|
Mic Pre-amp EIN |
< -125dB with 150 ohm source impedance. 22.4 kHz BW. |
|
CMRR |
> 79 dB @ 1 kHz, unity gain. |
|
Input impedance |
8k Ohms balanced, 4k Ohms unbalanced. |
|
Phantom power (per input) |
+48 VDC, 10 mA maximum. |
|
Dynamic range |
> 113 dB, A-weighted. |
|
THD+Noise |
< -100 dB; 22.4 kHz BW, unweighted; 1 kHz @ +15 dBu with 0 dB gain. Course gain is set to +4dBu. |
|
A to D Latency |
0.28 mS. |
|
Mechanical |
|
|
Space Required |
Half rack unit (WDH: 20.83 cm x 22.86 cm x 4.37 cm / 8.2 in. x 9 in. x 1.72 in.) Depth does not include connector allowance. Allow at least 3 inches additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections. |
|
Electrical |
PoE+ IEEE 802.3at Class 4, 25.5 Watts maximum. No line voltage switching required. Note: Subject to change when actual power requirements are determined. |
|
Ventilation |
Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc. |
|
Certifications or Compliance |
Safety: UL 60065, cUL 60065, IEC 60065. EMC: “Class A” device (applies to all of the following) EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, FCC Part 15, ICES-003. Environmental: RoHS. |
|
Analog Outputs |
|
|
Number of Outputs |
Four (4) balanced line level. |
|
Connectors |
3.81 mm terminal blocks. |
|
Nominal Output Level |
+4 dBu with 20 dB of headroom. |
|
Maximum Output Level |
+24 dBu (+22.8 dBu into a 2k Ohm minimum load). |
|
Output Impedance |
300 Ohms balanced, 150 Ohms unbalanced. |
|
Dynamic Range |
> 117 dB, A-weighted. |
|
THD+Noise |
< -97 dB; 22.4 kHz BW, unweighted; 1 kHz, 0 dB gain +8dBu output. |
|
D to A Latency |
0.60 mS. |
|
System |
|
|
Sampling Rate |
48 kHz. |
|
Frequency Response (A/D/A) |
20 Hz – 20 kHz, ± 0.5 dB. |
|
Dynamic Range (A/D/A) |
> 113 dB, A-weighted. |
|
Channel Separation (A/D/A) |
> 110 dB @ 1 kHz, +24 dBu. |
|
THD+Noise |
<-95 dB (22.4 kHz BW, un-weighted); 1 kHz @ +15 dBu with 0 dB gain. |
|
Latency (A/D/A) |
1.04 mS, inputs routed to outputs. |
|
Processors |
1 x Analog Devices SHARC 21489 @ 400 MHz SIMD. |
|
Raw Processing Capacity |
400 MIPS, 1.6 GFLOPS. |
|
Delay Memory |
174 mono seconds. |
|
Analog control inputs |
0-3.3 VDC. |
|
Recommended External Control Potentiometer |
10k Ohm, linear. |
|
Logic Outputs |
Low (0V) when active, pulled high (5V) when inactive. |
|
Logic Output Maximum External Power Supply Voltage |
24 VDC. |
|
Logic Output Maximum External Power Supply Current Sinking |
50 mA. |
|
Logic Output Maximum Output Current |
10 mA. |
|
RS-485 Serial I/O |
38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port. |
|
Ethernet Cable |
Standard CAT5e or CAT6, maximum device-to-device length = 100 meters. |
|
Dante Cable |
Standard CAT6, maximum device-to-device length = 100 meters. |
|
ARC Cable |
Standard CAT5, distance dependent upon load and number of devices. 8 Watts maximum power available. |
|
Maximum Devices Per System |
80 units per Site File. |
|
Maximum Stored Presets |
1000 |
-
Hai bisogno di aiuto,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Hai bisogno di finanziamenti,
Chiamateci !
