For professionals and enthusiasts alike.
- Microfoni a Filo
- Radiomicrofoni
- Microfoni Preamplificati
- Softie
- Aste
- Sospensioni Microfoniche
- Supporti microfoni
- Supporti Audio vari
- Estensione di garanzia Visuals
- Attrezzatura di backup gratuita durante la garanzia
- Supporto di servizio 7/7 disponibile tramite i nostri 3 numeri mobili di emergenza (GE / ZH / TI)
- Assistenza post-vendita interna, tech@visuals.ch
- Gli aggiornamenti del software e del firmware vengono eseguiti dai nostri tecnici dell'assistenza
Supporti Audio vari
-
Symetrix 80-0108-A - 1/2 U Surface Mount Bracket
Bracket for mounting a single half rack unit under table, onto wall, or onto other flat surfaces. Compatible Products. Prism 0x0, Prism 4x4. xIn 4, xOut 4, xIO 4x4. xControl, ARC-PSe. Compliance: RoHS
Generalmente spedito entro 2 o 4 settimane
102,14 CHF (IVA escl.)
110,41 CHF (IVA incl) Disponibile -
Symetrix 80-0123-B - 1/2 U Filler Panel
Used with 19 1U Rack Tray to fill an unused 1/2 rack space.
Generalmente spedito entro 2 o 4 settimane
102,14 CHF (IVA escl.)
110,41 CHF (IVA incl) Disponibile -
Fohhn QAT-10 - Horizontal support for AT-10, black
Horizontal support for AT-10, black
Prix sur demande -
Fohhn QAT-10 - Horizontal support for AT-10, white
Horizontal support for AT-10, white
Prix sur demande -
Fohhn VAS-14 - Set of 4x L-brackets, black
Set of 4x L-brackets for Arc-Subs AS-10/22/31/40, black
Prix sur demande -
Fohhn VAS-14 - Set of 4x L-brackets, white
Set of 4x L-brackets for Arc-Subs AS-10/22/31/40, white
Prix sur demande -
Fohhn DR-1 - Intermediate tube for satellite speaker, black
Intermediate tube for satellite speaker, black, height: 905 mm - 1.450 mm - end of tube: ? 35 mm, M20 threaded stud
Prix sur demande -
Fohhn DR-1 - Intermediate tube for satellite speaker, white
Intermediate tube for satellite speaker, white, height: 905 mm - 1.450 mm - end of tube: ? 35 mm, M20 threaded stud
Prix sur demande -
Fohhn WS-2 - Wall bracket for Scale-1/2, rotatable, black
Wall bracket for Scale-1/2, rotatable, black
Prix sur demande -
Fohhn WS-2 - Wall bracket for Scale-1/2, rotatable, white
Wall bracket for Scale-1/2, rotatable, white
Prix sur demande -
Fohhn WS-5 - Wall Bracket, Black
Wall bracket, rotating, for speakers with recess, integration into niches, balck
Prix sur demande -
Fohhn WS-5 - Wall Bracket, White
Wall bracket, rotating, for speakers with recess, integration into niches, white
Prix sur demande -
Contrik RDL-HD-HRA1 - 10.4" Rack Adapter
The HD-HRA1 10.4" Rack Adapter allows you to securely mount a single HD series product. Mixer amplifiers may be mounted forward for user control, or may be recessed securely behind a filler panel. This adapter fits 10.4" (26.41 cm) racks.
Generalmente spedito entro 2 o 4 settimane
101,22 CHF (IVA escl.)
109,42 CHF (IVA incl) Disponibile -
Yellowtec YT3295 - MMS Wall Adapter
Horizontal bar to connect two MMS poles for mounting mic arms between poles,To mount mic arm to MMS Wall
Generalmente spedito entro 2 o 4 settimane
101,21 CHF (IVA escl.)
109,41 CHF (IVA incl) Disponibile -
DPA Microphones UA0961 - Microphone Holder
Mount your microphone with true security; use DPA's Microphone Holder, which fits all DPA's large diaphragm and standard microphones plus other microphones with 19 mm housings. DPA delivers extreme quality; start here.
Generalmente spedito entro 2 o 4 settimane
101,21 CHF (IVA escl.)
109,41 CHF (IVA incl) Disponibile -
DPA Microphones GSM4000 - Gooseneck Shock Mount for d:dicate
The DPA Microphones Gooseneck Shock Mount for d:dictate can be used to mount a microphone on an instrument. It is a combination of an 4.5" long gooseneck and shock mount. You can use it together with your choice of instrument clip and easily attach the mount to your specific instrument.
Generalmente spedito entro 2 o 4 settimane
101,21 CHF (IVA escl.)
109,41 CHF (IVA incl) Disponibile -
Ultimate TS-80B - Tripod Load capacity of 150lbs, single, black
Tripod (Black) Load capacity of 150lbs single, Alu, weight 3.3kg, 1118-2007mm, max. 68.2 kg
Generalmente spedito entro 2 o 4 settimane
101,00 CHF (IVA escl.)
109,18 CHF (IVA incl) Disponibile -
Contrik RDL-DC-1W - Desktop or Wall Mounted Chassis White
The white DC-1W Desktop or Wall Mounted Chassis is designed to hold 1 Decora style unit, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or a vertical surface such as a cabinet or wall.
Generalmente spedito entro 2 o 4 settimane
100,64 CHF (IVA escl.)
108,79 CHF (IVA incl) Disponibile -
Contrik RDL-DC-1B - Desktop or Wall Mounted Chassis Black
The black DC-1B Desktop or Wall Mounted Chassis is designed to hold 1 Decora style unit, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or a vertical surface such as a cabinet or wall.
Generalmente spedito entro 2 o 4 settimane
100,64 CHF (IVA escl.)
108,79 CHF (IVA incl) Disponibile -
Contrik RDL-DC-1G - Desktop or Wall Mounted Chassis Gray
The gray DC-1G Desktop or Wall Mounted Chassis is designed to hold 1 Decora style unit, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or a vertical surface such as a cabinet or wall.
Generalmente spedito entro 2 o 4 settimane
100,64 CHF (IVA escl.)
108,79 CHF (IVA incl) Disponibile -
Contrik RDL-RC-PS5 - 19" Rackmount for 5 Desktop Power Supplies
The RC-PS5 19" Rackmount for 5 Desktop Power Supplies can be used to mount up to 5 RDL desktop power supplies. Wiring can be routed out the sides or rear of the chassis.
Generalmente spedito entro 2 o 4 settimane
97,63 CHF (IVA escl.)
105,54 CHF (IVA incl) Disponibile -
Contrik RDL-RK-2UX - 19" Utility Rack Chassis, 2 RU extension
The RK-2UX is an extension kit that adds 2RU in height to any RK-2U. Multiple kits may be added to an RK-2U to make it any height.
Generalmente spedito entro 2 o 4 settimane
97,26 CHF (IVA escl.)
105,14 CHF (IVA incl) Disponibile -
Mackie DB-200 - Premium Desktop Microphone Boom Arm
Keep you microphone ready for action while reducing cable clutter with the Mackie DB-200, a stylish and sturdy premium desktop microphone boom arm that can be articulated to the perfect position.
97,00 CHF (IVA escl.)
104,86 CHF (IVA incl) DisponibileGeneralmente spedito entro 2 o 3 settimane
-
Contrik RDL-HD-WM2 - Wall Mount Bracket for HD Series Amplifiers
The HD-WM2 mounts a compatible HD series product and its power supply to a wall or other flat surface. The interior of the bracket holds the power supply with space to conceal excess wire length for a professional installation. Special tabs are provided to firmly secure the wiring connected to the HD product.
Generalmente spedito entro 2 o 4 settimane
96,86 CHF (IVA escl.)
104,71 CHF (IVA incl) Disponibile -
Neumann LH 29 - TV Spigot
The LH 29 TV-Spigot from Neumann is designed for mounting a monitor onto a lighting stand or G-clamp and truss bar
Generalmente spedito entro 2 o 4 settimane
95,79 CHF (IVA escl.)
103,55 CHF (IVA incl) Disponibile -
Neumann LH 25 - Speaker Mounting Bracket
The LH 25 Speaker Mounting Bracket from Neumann allows you to mount your speaker monitor on a wall or ceiling. The LH 25 can also be fixed onto a loudspeaker stand
Generalmente spedito entro 2 o 4 settimane
95,79 CHF (IVA escl.)
103,55 CHF (IVA incl) Disponibile -
Contrik RDL-WH1 - Power Supply Mounting Adapter Kit
The WH1 Power Supply Mounting Adapter allows mounting of up to six wall wart power supplies together in one location. Each kit includes 1 mounting bracket for 6 Supplies, 6 UL/CSA 6" power cords, 6 sets of detachable mounting tabs, and 6 cable ties to secure the power supplies.
Generalmente spedito entro 2 o 4 settimane
93,99 CHF (IVA escl.)
101,60 CHF (IVA incl) Disponibile -
Contrik RDL-WH2 - Power Supply Mounting Adapter Kit
The WH2 Power Supply Mounting Adapter allows mounting of up to six wall wart power supplies together in one location. Each kit includes 1 mounting bracket for 6 Supplies, 6 UL/CSA 6" power cords, 6 sets of detachable mounting tabs, and 6 cable ties to secure the power supplies.
Generalmente spedito entro 2 o 4 settimane
93,99 CHF (IVA escl.)
101,60 CHF (IVA incl) Disponibile -
Contrik RDL-HR-RA2 - Rack Adapter for HALF-RACK Series
The HR-RA2 Rack Adapter is ideal for mounting two HALF-RACK products, plates or accessories side-by-side in one rack space.
Generalmente spedito entro 2 o 4 settimane
93,92 CHF (IVA escl.)
101,53 CHF (IVA incl) Disponibile -
Contrik RDL-HD-FP2L - Filler Panel with Lens
The HD-FP2L Filler Panel with Lens is designed to mount in front of an HD series product and facilitates complete viewing while preventing user adjustments or tampering with the device. Included lens can be removed during installation.
Generalmente spedito entro 2 o 4 settimane
92,35 CHF (IVA escl.)
99,83 CHF (IVA incl) Disponibile -
DPA Microphones UA0639 - Microphone Clip
DPA Microphones' UA0639 Microphone Clip is a stand adapter for handheld mics that offers a tight grip while still letting you remove and secure your mic with ease.
Generalmente spedito entro 2 o 4 settimane
91,92 CHF (IVA escl.)
99,37 CHF (IVA incl) Disponibile -
DPA Microphones TB4000 - Table Base
The DPA TB4000 Microphone Table Base works with most microphone holders with a 3/8-inch thread although its specifically optimized for use with Compact Shock Mount CSM4000. It's black non-reflective surface will match your microphone set up and blend into the background creating a pleasant aesthetic.
Generalmente spedito entro 2 o 4 settimane
91,92 CHF (IVA escl.)
99,37 CHF (IVA incl) Disponibile -
DPA Microphones MC4001 - Microphone Clip for MMP-E Active Cable
The MC4001 Microphone Clip from DPA fits the recess at the MMP-E active cable preamp. It can be used with hanging mics or low-profile table or instrument mics (sold separately) to attach them to a 3/8" threaded mic stand.
Generalmente spedito entro 2 o 4 settimane
91,92 CHF (IVA escl.)
99,37 CHF (IVA incl) Disponibile -
Fohhn QAT-09 - Horizontal support for AT-08/09, white
Horizontal support for AT-08/09, white
Prix sur demande -
Fohhn QAT-09 - Horizontal support for AT-08/09, black
Horizontal support for AT-08/09, black
Prix sur demande -
Fohhn 8312-00000 - Clamp-1 with threat bolt M10
Clamp-1 with threat bolt M10 for traverse mounting
Prix sur demande -
Fohhn WAT-08k - Wall bracket, white
Wall bracket, universal adjustment 360° for AT-05, AT-061, AT-07, AT-08, AT-09, AT-10, AT-201, AL-50/100/150, LX-100/150, adapter plate 90°-rotatable
Prix sur demande -
Fohhn WAT-08k - Wall bracket, black
Wall bracket, universal adjustment 360° for AT-05, AT-061, AT-07, AT-08, AT-09, AT-10, AT-201, AL-50/100/150, LX-100/150, adapter plate 90°-rotatable
Prix sur demande -
Fohhn WAT-08 - Wall bracket, white
Wall bracket, universal adjustment 360° for AT-05, AT-061, AT-07, AT-08, AT-09, AT-10, AT-201, AL-50/100/150, LX-60/100/150, adapter plate 90°-rotatable
Prix sur demande -
Fohhn WAT-08 - Wall bracket, black
Wall bracket, universal adjustment 360° for AT-05, AT-061, AT-07, AT-08, AT-09, AT-10, AT-201, AL-50/100/150, LX-60/100/150, adapter plate 90°-rotatable
Prix sur demande -
Contrik RDL-RC-HPS3 - 10.4" Rack Adapter
The RC-HPS3 10.4" Rack Adapter mounts up to 3 desktop-style power supplies. Wiring may be routed out the sides and rear of the chassis. It features the Dual-Lok interlocking fastening system to allow you to secure your power supplies. The RC-HPS3 is compatible with all RDL desktop power supplies and with any other desktop power supply having dimensions...
Generalmente spedito entro 2 o 4 settimane
89,74 CHF (IVA escl.)
97,01 CHF (IVA incl) Disponibile -
Contrik RDL-RM-D3 - 19" Rack Mount for 3 Decora Modules
The RM-D3 is a 1 RU rack panel that allows the mounting of 3 Decora products, such as RDL remote controls and D-Series connector plates. The installer can label each installed module behind an included protection lens.
Generalmente spedito entro 2 o 4 settimane
89,14 CHF (IVA escl.)
96,36 CHF (IVA incl) Disponibile -
Contrik RDL-EZ-RA6 - Rack Adapter for 6 Increments of 1/6 Rack Width
The RDL EZ-RA6 Rack Adapter for 6 Increments of 1/6 Rack Width attaches to only one rack space and slides out for easy product mounting.
Generalmente spedito entro 2 o 4 settimane
89,09 CHF (IVA escl.)
96,31 CHF (IVA incl) Disponibile -
PreSonus NSB16.8-RACK-KIT - Rackmount Kit for NSB 16.8 AVB Network Stage Box
The PreSonus NSB 16.8 Rackmount Kit allows you to install your NSB 16.8 AVB network stagebox into a standard 19" rack mount enclosure. The kit includes two blank panels, two Ethernet cables, and mounting screws. One panel features two Ethercon jacks, which once connected with the included Ethernet cables, provides access to the AVB network ports from the...
Generalmente spedito entro 2 o 4 settimane
88,21 CHF (IVA escl.)
95,36 CHF (IVA incl) Disponibile -
PreSonus NSB8.8-RACK-KIT - Rackmount Kit for NSB 8.8 AVB Network Stage Box
The PreSonus NSB 8.8 Rackmount Kit allows you to install your NSB 8.8 AVB network stagebox into a standard 19" rack mount enclosure. The kit includes two blank panels, two Ethernet cables, and mounting screws. One panel features two Ethercon jacks, which once connected with the included Ethernet cables, provides access to the AVB network ports from the...
Generalmente spedito entro 2 o 4 settimane
88,21 CHF (IVA escl.)
95,36 CHF (IVA incl) Disponibile -
Contrik RDL-HD-BP1 - BACK-PACK Rear Cover
The BACK-PACK Rear Cover is designed to mount onto the HD Series Mixer or Amplifier and prevents users from accessing the rear panel of the device. Accommodating the power supply unit, the Rear Cover offers a fully closed back for the installed amplifier.
Generalmente spedito entro 2 o 4 settimane
87,05 CHF (IVA escl.)
94,10 CHF (IVA incl) Disponibile -
Contrik RDL-EZ-DC2 - Desktop Chassis for 1/3 Rack Width EZ Series Products
The EZ-DC2 is a simple desktop chassis that can hold electronics. It was specifically designed for mounting RDL's 1/3 rack width EZ Series of A/V components. The EZ-DC2 is a great solution for creating a custom installation, especially in situations where the operator is seated at a table or a desk.
Generalmente spedito entro 2 o 4 settimane
86,26 CHF (IVA escl.)
93,25 CHF (IVA incl) Disponibile -
Contrik RDL-HR-HRA1 - 10.4" Rack Adapter
The HR-HRA1 10.4" Rack Adapter is a 1RU rack chassis for mounting one RDL HALF-RACK product, plate, or accessory. HALF-RACK series products drop into the chassis, slide into position, and are secured by tightening 2 or 4 screws provided with the HALF-RACK product or accessory. This adapter fits 10.4" (26.41 cm) racks.
Generalmente spedito entro 2 o 4 settimane
85,10 CHF (IVA escl.)
91,99 CHF (IVA incl) Disponibile -
Rycote RYC185809 - PCS-Utility Half Coupler Kit Small
PCS-Utility Half Coupler Kit Small
83,16 CHF (IVA escl.)
89,90 CHF (IVA incl) DisponibileGeneralmente spedito entro 4 o 5 settimane
-
Rycote RYC185810 - PCS-Utility Half Coupler Kit Large
PCS-Utility Half Coupler Kit Large
83,16 CHF (IVA escl.)
89,90 CHF (IVA incl) DisponibileGeneralmente spedito entro 4 o 5 settimane
-
Yamaha STAGEPASSPKSTD - Tripod for Club, BR, MS and MSR Series
Tripod for Club, BR, MS and MSR Series, Stagepas 400/600 (piece)
Generalmente spedito entro 2 o 4 settimane
80,08 CHF (IVA escl.)
86,57 CHF (IVA incl) Disponibile -
Contrik RDL-EZ-DC1 - Desktop Chassis for 1/6 Rack Width EZ Series Products
The EZ-DC1 is a simple desktop chassis that can hold electronics. It was specifically designed for mounting RDL's 1/6 rack width EZ Series of A/V components. The EZ-DC1 is a great solution for creating a custom installation, especially in situations where the operator is seated at a table or a desk.
Generalmente spedito entro 2 o 4 settimane
79,07 CHF (IVA escl.)
85,47 CHF (IVA incl) Disponibile -
Fohhn VLX-11 - Universal bracket for Linea LX-11, black
Universal bracket for Linea LX-11, black
Prix sur demande -
Fohhn VLX-11 - Universal bracket for Linea LX-11, white
Universal bracket for Linea LX-11, white
Prix sur demande -
Fohhn QAT-07 - Horizontal support for AT-061/07, black
Horizontal support for AT-061/07, black
Prix sur demande -
Fohhn QAT-07 - Horizontal support for AT-061/07, white
Horizontal support for AT-061/07, white
Prix sur demande -
Fohhn SA-1 - Reducing flange
Reducing flange, suitable for all speaker stands with 36mm dia., with M6x18mm male thread
Prix sur demande -
Fohhn SA-2 - Reducing flange
Reducing flange, 36mm dia. with M8x18mm male thread for AT-10/201/30/35/40/50
Prix sur demande -
Fohhn SA-100 Black - Stand Adapter
SA-100 is particularly suitable for mounting systems with T-slots on a conventional tripod. The adapter head can be tilted and locked.
Prix sur demande -
Yamaha WM2X08 - K&M Wall Mount for IF2108 & IF2208
K&M Wall Mount for IF2108 & IF2208 vertical & horizontal wall mounting
Generalmente spedito entro 2 o 4 settimane
78,32 CHF (IVA escl.)
84,66 CHF (IVA incl) Disponibile -
Contrik RDL-HR-RU1 - Mounting Adapter Kit
The HR-RU1 is a mounting adapter kit that allows you to mount a RACK-UP module in one side of an HR-RA2 Rack Adapter. The kit consists of 2 mounting brackets and the necessary mounting screws.
Generalmente spedito entro 2 o 4 settimane
78,23 CHF (IVA escl.)
84,57 CHF (IVA incl) Disponibile -
Neumann LH 37 - Mounting Flange Adapter
The LH 37 Mounting Flange Adapter from Neumann is designed for mounting on to a subwoofer with a top panel flange
Generalmente spedito entro 2 o 4 settimane
75,58 CHF (IVA escl.)
81,70 CHF (IVA incl) Disponibile -
Neumann LH 28 - Tripod Speaker Stand Adapter
The LH 28 Tripod Speaker Stand Adapter from Neumann is a mounting adaptor for mounting standard tripods with a 35 mm diameter mounting pole. It features a locking screw knob for safety
Generalmente spedito entro 2 o 4 settimane
75,58 CHF (IVA escl.)
81,70 CHF (IVA incl) Disponibile -
Fohhn WS-6 - Wall bracket, Black
Wall bracket, rotating, for speakers with notch. Black
Prix sur demande -
-
Contrik RDL-EZ-HRA3 - 10.4" Rack Adapter
The RDL EZ-HRA3 10.4" Rack Adapter when used with the EZ-RA6 Base Plate Assembly (sold separately) allows you to mount any EZ A/V device and occupies 1 RU 10.4" (26.41 cm) space.
Generalmente spedito entro 2 o 4 settimane
73,97 CHF (IVA escl.)
79,96 CHF (IVA incl) Disponibile -
Rycote RYC185803 - PCS-Spigot
The PCS-Spigot is the ideal accessory to convert your stands and arms with spigot connections into super reliable, quick release systems and attach any kit with a 3/8" thread.
73,91 CHF (IVA escl.)
79,90 CHF (IVA incl) DisponibileGeneralmente spedito entro 4 o 5 settimane
-
Rycote RYC185804 - PCS-Utility
The PCS-Utility is made from robust, high-quality materials whilst being super versatile. With milled anodised aluminium on the exterior for a lightweight but robust body, ensuring durability even in the most challenging conditions
73,91 CHF (IVA escl.)
79,90 CHF (IVA incl) DisponibileGeneralmente spedito entro 4 o 5 settimane
-
Cineboutique A-CARDELPLCM - CARDELLINI - Mic Clamp
CARDELLINI - Mic Clamp
Generalmente spedito entro 2 o 4 settimane
73,13 CHF (IVA escl.)
79,05 CHF (IVA incl) Disponibile -
Yamaha RK-MG12 - Rackmount Kit for MG12 and MG12XU
Rackmount Kit for MG12 and MG12XU
Generalmente spedito entro 2 o 4 settimane
71,28 CHF (IVA escl.)
77,05 CHF (IVA incl) Disponibile -
Yamaha C1941000055 - Free Angle Clamp
KÖNIG & MEYER Clamp bracket for AG03/06, MG6/10, MS101IV, MSP3, STAGEPAS 400/600 Mixer
Generalmente spedito entro 2 o 4 settimane
71,28 CHF (IVA escl.)
77,05 CHF (IVA incl) Disponibile -
Yamaha RK-EMX7 - Rackmount Kit for EMX7
Rackmount Kit for EMX7
Generalmente spedito entro 2 o 4 settimane
70,40 CHF (IVA escl.)
76,10 CHF (IVA incl) Disponibile -
Ultimate TS-70B - Tripod Load capacity of 150lbs, single, black
Tripod (Black) Load capacity of 150lbs single, Alu, weight 2.4kg, 1270-1956mm, max. 68.2 kg
Generalmente spedito entro 2 o 4 settimane
69,00 CHF (IVA escl.)
74,59 CHF (IVA incl) Disponibile -
Cineboutique A-CARDELPECM - CARDELLINI - Mic Clamp
CARDELLINI - Mini narrow press - Male Congress
Generalmente spedito entro 2 o 4 settimane
68,25 CHF (IVA escl.)
73,78 CHF (IVA incl) Disponibile -
Fohhn QAT-05 - Horizontal support for AT-05, white
Horizontal support for AT-05, white
Prix sur demande -
Fohhn QAT-05 - Horizontal support for AT-05, black
Horizontal support for AT-05, black
Prix sur demande -
Contrik RDL-FP-PSB1A - Desktop Power Supply Mounting Bracket
The RDL FP-PSB1 is a mounting bracket designed for the PS-24U2 power supply. A provision is included for mounting other modules, and any FP-PA20 type audio power amplifier can be mounted directly to the FP-PSB1 as well. The FP-PSB1 can be mounted in an FP-RRA or FP-RRAH Flat-Pak series rack mount panel or to any flat surface.
Generalmente spedito entro 2 o 4 settimane
67,83 CHF (IVA escl.)
73,32 CHF (IVA incl) Disponibile -
Neumann LH 47 - Mounting Adapter Plate
The Neumann LH 47 Mounting Adapter Plate is used in conjunction with Neumann LH series active monitor mounting accessories
Generalmente spedito entro 2 o 4 settimane
67,67 CHF (IVA escl.)
73,15 CHF (IVA incl) Disponibile -
Contrik RDL-SF-MSM1 - Microphone Stand Mount for SysFlex Modules
Mounts any SysFlex Module on a Mic Stand (Standard 5/8" 27 TPI). Compatible with All SysFlex Modules. Each SysFlex Module Secured by One Single Screw
Generalmente spedito entro 2 o 4 settimane
66,47 CHF (IVA escl.)
71,85 CHF (IVA incl) Disponibile -
Contrik RDL-ST-PBR4 - Stick-On Mounting Bracket
The ST-PBR4 Stick-On Mounting Bracket is a mounting frame with slots for four Stick-On modules. It mounts on an FP-PSB1A power supply bracket (available separately) or to any flat surface. The mounting bracket design allows the installer to secure the modules without using any adhesive pads and to slide into a FLAT-PAK rack mount track (available...
Generalmente spedito entro 2 o 4 settimane
65,70 CHF (IVA escl.)
71,02 CHF (IVA incl) Disponibile -
Fohhn WAL-03 - Wall bracket for AL-10/20, LX-10, LC-20 and LEN-20, black
Wall bracket for AL-10/20, LX-10, LC-20 and LEN-20, black
Prix sur demande -
Fohhn Cable gland set - Back plate with cable gland
Back plate with cable gland for outdoor use
Prix sur demande -
Fohhn CSK-1 - Ceiling suspension kit
Ceiling suspension kit, with two Y-shaped cables
Prix sur demande -
PreSonus EM-MOUNT - Mounting Kit for PreSonus EarMix 16M
The PreSonus EM-Mount Mounting Kit is designed specifically for the PreSonus EarMix 16M AVB personal monitor mixer and allows for the unit to be mounted to a music stand or microphone stand. The mount can be deployed with two options: it can attach to the standard screw mount at the top of a microphone stand or it can be clamped horizontally to a pole.
Generalmente spedito entro 2 o 4 settimane
60,35 CHF (IVA escl.)
65,24 CHF (IVA incl) Disponibile -
Contrik RDL-TX-HRA3 - 10.4" Rack Adapter
The TX-HRA3 10.4" Rack Adapter allows you to securely rack mount up to 3 TX modules. This adapter fits 10.4" (26.41 cm) racks.
Generalmente spedito entro 2 o 4 settimane
59,68 CHF (IVA escl.)
64,51 CHF (IVA incl) Disponibile -
Neumann LH 48 - Tripod Adapter Plate
The black LH 48 Tripod Adapter Plate from Neumann is a 4.5 (115 mm) flange adapter for mounting a monitor or loudspeaker on König & Meyer tripods No. 26790 and No. 26795
Generalmente spedito entro 2 o 4 settimane
58,88 CHF (IVA escl.)
63,65 CHF (IVA incl) Disponibile -
Neumann LH 64 - Omnimount/VESA Adaptor
An adapter to convert a pair of 70 mm spaced M8 mounting points to the standard Omnimount 75, VESA 75, and VESA 100 mounting points
Generalmente spedito entro 2 o 4 settimane
58,88 CHF (IVA escl.)
63,65 CHF (IVA incl) Disponibile -
Contrik RDL-RU-BR1 - Mounting Bracket for Rack-Up Module
The RU-BR1 Mounting Bracket for Rack-Up Module is a special mounting bracket designed for use with RDL Rack-Up modules. The bracket allows you to mount (1) module above or below any horizontal surface.
Generalmente spedito entro 2 o 4 settimane
56,91 CHF (IVA escl.)
61,52 CHF (IVA incl) Disponibile -
Yamaha WM 2205 - K&M Wall Mount for IF2205
K&M Wall Mount for IF2205 vertical & horizontal mounting
Generalmente spedito entro 2 o 4 settimane
56,32 CHF (IVA escl.)
60,88 CHF (IVA incl) Disponibile -
Yamaha Kit Rack G55/V55 - Rack mounting kit for G55 and XD-V55
Rack mounting kit for G55 and XD-V55
Generalmente spedito entro 2 o 4 settimane
56,06 CHF (IVA escl.)
60,60 CHF (IVA incl) Disponibile -
Fohhn VAS-12 - Flying- and mounting bracket, black
Flying- and mounting bracket, set of 2, ball impact resistant (two sets per subwoofer - 4 brackets - required!)
Prix sur demande -
Fohhn VAS-12 - Flying- and mounting bracket, white
Flying- and mounting bracket, set of 2, ball impact resistant (two sets per subwoofer - 4 brackets - required!)
Prix sur demande -
-
-
Contrik RDL-RU-HRA1 - 10.4" Rack Adapter
The RU-HRA1 10.4" Rack Adapter mounts 1 RACK-UP module or mounting frame for AMS accessories. This adapter fits 10.4" (26.41 cm) racks.
Generalmente spedito entro 2 o 4 settimane
55,86 CHF (IVA escl.)
60,38 CHF (IVA incl) Disponibile -
Contrik RDL-HD-FP1 - Filler Panel
The Filler Panel is designed to fill the empty space in the rack adapter or mount in front of an HD series mixer or amplifier, and prevents users from making adjustments or tampering with the device.
Generalmente spedito entro 2 o 4 settimane
55,07 CHF (IVA escl.)
59,53 CHF (IVA incl) Disponibile -
Fohhn SA-3 - Reducing flange
Reducing flange, 36mm dia. with M10 female thread for vertical brackets VAT-10/20/34/50, VXT-2/3/5, VLX-11, VPT-6 and VPT-70
Prix sur demande -
Vocas 0350-1460 - Mic holder 15mm
Mic holder 15mm
Generalmente spedito entro 2 o 4 settimane
54,37 CHF (IVA escl.)
58,77 CHF (IVA incl) Disponibile -
Contrik RDL-EZ-SD2 - 1/3 Rack Width Storage Drawer
The EZ-SD2 is a slide-out rack drawer that can hold cables, adapters, and more. It was designed to easily mount into the RDL EZ-RA6 rack tray, or the EZ-CC6 component chassis. The EZ-SD2 is a great solution for creating a custom installation of EZ-Series gear in a rack that even has its own storage space.
Generalmente spedito entro 2 o 4 settimane
54,29 CHF (IVA escl.)
58,69 CHF (IVA incl) Disponibile -
Contrik RDL-SMK-12 - Stick-On Mounting Kit
The SMK-12 Stick-On Mounting Kit is a kit that allows you to mount Stick-On modules to a flat surface. It will accommodate up to (6) modules mounted flat or up to (12) modules mounted on their edge. The modules are fastened to the mounting board using screws.
Generalmente spedito entro 2 o 4 settimane
53,39 CHF (IVA escl.)
57,71 CHF (IVA incl) Disponibile
-
Hai bisogno di aiuto,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Hai bisogno di finanziamenti,
Chiamateci !
