Tascam MM-2D-E - 2 In / 2 Out Dante-Analog Converter with DSP Mixer, Euroblock

Tascam MM-2D-E - 2 In / 2 Out Dante-Analog Converter with DSP Mixer, Euroblock

Riferimento 1025805

Condizione: Nuovo

The MM-2D-E Channel Mic/Line Input/Output Dante Converter with Built-In DSP Mixer from...

Nostro prezzo :

667,59 CHF

721,66 CHF (IVA incl.)

Guarantee: Visuals Guarantee 24 Months In-house aftersales service: update, repair and backup.

Availability:

Generalmente spedito entro 4 o 6 settimane

Order now and we will deliver as soon as possible, or please contact us on 022 561 07 07 for other arrangements.

Avvisami quando disponibile

- +

SKU: 1025805

Ulteriori informazioni

Dettagli

Tascam 2 In / 2 Out Dante-Analog Converter With DSP Mixer, Euroblock

The MM-2D-E Channel Mic/Line Input/Output Dante Converter with Built-In DSP Mixer from Tascam is a compact half-rack converter that can be used to convert 2-channel mic/line input/output signals on Euroblock connectors into 4 Dante channels or the other way around for pro-audio applications.

The MM-2D-E Input/Output Dante Converter features level control and is compatible with Dante Domain Manager software, which offers security functions, enables the use of wide-area networks, and provides easy access to Dante systems using already established network infrastructures. With AES67 mode, connection to AES67 network systems is also possible. Two installation brackets and four Euroblock plugs are included.

Features

- 2 analog input/outputs on Euroblock connectors

- 4 Dante inputs/outputs

- Supports PoE (Power over Ethernet)

- Sample rate up to 24-bit / 96 kHz

- Supports Dante daisy-chain, which allows two Dante Compact Processor models to be connected without a network switch

- Compatible with Dante Domain Manager and Dante AES67 mode

- Flexible scene preset function allows you to work in different area situations (up to 50 presets)

- Two types of user-control software available for Windows/Mac/iOS/Android devices:

- TASCAM DCP CONNECT, for integrators: input/output routing selection, DSP/design/scene settings of the complete system, etc.

- TASCAM EZ CONNECT, for end-users: simple app design for only the necessary functions such as area-volume settings, etc

- Remote control via Dante

- Half-rack mountable size

- Equipped with indicators that show LAN/Dante connection status and sample rate

- Equipped with signal indicators that monitor digital input/output signals

- Configurable reference level (via remote control only)

- Surface-mount adapters for installation under desks included

	Specifications
	General
	Formats Supported	44.1/48/88.2/96 kHz, 16/24-Bit, 2 Channels
	Input/Output
	Connector	RJ-45
	Transmission Protocol	Dante
	Gigabit Ethernet	1000 BASE-T (IEEE 802.3ab)
	Cable	Category 5e or Faster STP Cables
	Analog Inputs
	Connector	Euroblock (Balanced) 3.81 mm Pitch
	Minimum Input Level	-74 dBu
	Maximum Input Level	+26 dBu
	Input Impedance	2.0 kOhms or Higher
	Analog Outputs
	Connector	Euroblock (Balanced) 3.81 mm Pitch
	Nominal Output Levels	+4 dBu (when Ref. Level not −9 dBFS) +6 dBu (when Ref. Level set to −9 dBFS)
	Maximum Output Level	Switchable: +15 dBu (Ref. Level: −9 dBFS) +18 dBu (Ref. Level: −14 dBFS) +20 dBu (Ref. Level: −16 dBFS) +22 dBu (Ref. Level: −18 dBFS) +24 dBu (Ref. Level: −20 dBFS)
	Output Impedance	200 Ohms or Lower
	Control Input/Output
	External Control Interface	LED/Switch: Euroblock (Balanced) 3.81 mm Pitch
	LED	Connectors: Open Collector (10 Ohms Output Impedance, 48V withstand Voltage, 35 mA Maximum Current) Low level Maximum Output Voltage: 0.5 V
	Switch Connectors	Maximum Input Voltage: 5.5 V High-Level Minimum Input Voltage: 2.31 V Low-Level Maximum Input Voltage: 0.99 V
	Audio Performance
	Mic In to Dante Out	Mic Amp EIN (Equivalent Input Noise): -125 dBu (150 Ohms, 22 kHz LPF+A, JEITA)
	Frequency Response	±0.5 dB: 20 Hz to 20 kHz (44.1/48 kHz Sampling Frequency, JEITA) ±0.5 dB: 20 Hz to 40 kHz (88.2/96 kHz Sampling Frequency, JEITA)
	Distortion	0.005 % (when −1 dBFS Input, 44.1/48/88.2/96 kHz Sampling Frequency, JEITA)
	Signal to Noise Ratio	105 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA)
	Crosstalk	100 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA)
	Dynamic Range	105 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA)
	Frequency Response	Dante In / Line Out: ±0.5 dB: 20 Hz to 20 kHz (44.1/48 kHz Sampling Frequency, JEITA) ±0.5 dB: 20 Hz to 40 kHz (88.2/96 kHz Sampling Frequency, JEITA)
	Distortion (THD)	0.005 % (when −1 dBFS Input, 44.1/48/88.2/96 kHz Sampling Frequency, JEITA)
	Signal to Noise Ratio	105 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA)
	Crosstalk	100 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA)
	Dynamic Range	105 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA)
	Other Features
	Power	PoE Class 0 Tascam PS-P1220E AC Adapter (Sold Separately)
	Power Consumption	6 W
	Operating Temperature	32 to 104°F / 0 to 40°C
	Dimensions (W x H x D)	8.4 x 1.8 x 5.4" / 21.4 x 4.4 x 13.6 cm
	Weight	31.0 oz / 878.0 g

NEED AIUTO?

GE : + 41 22 561 07 07
ZH : + 41 43 255 59 00
TI : + 41 91 985 25 11