For professionals and enthusiasts alike.
1003376
Nuovo
Invia ad un amico
Destinatario :
* Campi richiesti
o Annulla
Invia ad un amico
Destinatario :
* Campi richiesti
o Annulla
|
Per Loudspeaker Unit |
|
Electroacoustic features |
|
|
Acoustic design |
Compact passive loudspeaker, 2-way, vented |
|
Components |
5“ / 1“ dome tweeter with short horn and self resetting IPC[*] high frequency protection |
|
Power rating (nominal) |
80 W |
|
Power rating (programme) |
160 W |
|
Power rating (peak) |
320 W |
|
Sound pressure |
87 db |
|
Maximum sound pressure |
110 db |
|
Frequency range |
58 Hz – 20 khz |
|
Nominal dispersion (h × v) |
90° × 90° |
|
Nominal impendance |
8 Ω |
|
General features |
|
|
Enclosure |
Birch plywood |
|
Front design |
Open, behind cover panel |
|
Mounting points |
4 × M6 threaded inserts |
|
Connections |
2 × loudspeaker connection terminals with spring-loaded terminal connection |
|
Standard colours |
Textured paint, black |
|
Dimensions (W × H × D) |
273 × 156 × 165.5 mm |
|
Weight |
3.5 kg |
|
Optional features |
|
|
Special colours |
All RAL Classic colours, other colour catalogues possible on request |
|
DSP amplifier unit |
|
Output power |
2 × 50 W / 8 Ω 2 × 100 W / 4 Ω |
|
Factory settings |
2 channels at 4 Ω, volume control enabled on front panel, loaded presets for media board application |
|
THD |
0.2 % nominal power output |
|
Frequency range |
-3 db 20 Hz – 20 khz |
|
DSP Functions |
In- and Output Levels, Limiter, 5-Band parametric Equalizer per channel, high- and low-pass filters with adjustable cut-off frequency and selectable slew rate, Delay (up to 60 ms per channel), I/O routing |
|
Interface |
Ethernet, web-based application (no additional software required for remote monitoring or control) |
|
Audio switching (APD) |
Threshold for change to operating mode: 5 mv, Change to Standby mode after 30 min with no input signal |
|
Volume control |
Front panel (removable control buttons and safety cover), Interface (PC, ios, Android, password protection), individual/simultaneous remote control per channel with 10 k Ω potentiometer |
|
Protection circuits |
Overheating, short circuit, overload |
|
Signal/Noise ratio |
-100 db under nominal output power (rated sound pressure level) |
|
Inputs |
2 balanced line inputs (Phoenix terminal type 3.5 mm, plug-in), 2 unbalanced line inputs (RCA) |
|
Input sensitivity |
Balanced – 750 mv, unbalanced – 750 mv |
|
Input impedance |
Balanced: 20 kohm, unbalanced: 10 kohm |
|
Outputs |
2 loudspeaker outputs (Phoenix terminal type 5.08 mm, plug-in) |
|
Power supply |
100 – 240 VAC, 50/60 Hz |
|
Power consumption |
Standby mode (Ethernet active): 1 W, 22 ma, 3.14 BTU, active waiting state: 12.5 W, 173 ma, 41 BTU, average power: 4 Ohm (audio signal, 1/3 power), 116 W, 395 BTU, maximum power: 4 Ohm (audio signal, peak), 384 W, 4.9 A, 1310 BTU |
|
Cooling |
Convection cooled (without fans) |
|
Dimensions (W × H × D) |
216 × 45 × 343 mm (1 RU, 9,5”) |
|
Weight |
2.2 kg |
|
Optional accessories |
Rack mounting kit |
|
Controls |
Channel 1 Level, Chanel 2 Level, Power On/Off |
|
Displays |
|
|
Power (LED) |
Blue (Lit = ON, flashing = Standby) |
|
Clip CH1 & CH2 (LED) |
Red |
|
Signal CH1 & CH2 (LED) |
Green |