Rycote Mic Case, 20cm
The 7.9" Rycote Microphone Protector Case is a water-resistant cylindrical case designed to provide multi-layered protection of several small-diaphragm microphones for boom operators and production sound recordists in ENG, EFP, television production, and film shoots. The exterior of the PVC case is covered in 600D oxford nylon and red fabric lines the interior. Like the nylon covering, the zipper closure is water-resistant.
Sheath your microphones with the three supplied PVC mic tubes, which telescope from 4.9 to 7.1" and include foam inserts to optimize the fit. The included carabiner clip conveniently hooks through the webbed carry loop for easy transport or attachment to a belt or pack.
- Tough, water-resistant case holds up to three small-diaphragm microphones
- Tubular 1/8"-thick PVC case covered in heavy-duty 600D oxford nylon and lined with red fabric
- Water-resistant, zip-fastening system with easy-pull toggle
- Silica gel sachets included to help ensure a healthy climate for your microphones
- Webbed carry loop
- Handy lightweight carabiner for quick and secure fastening
- Telescopic PVC microphone tubes utilize a threaded design to allow extension from 4.9 to 7.1"
- Use the supplied foam inserts—four per mic tube— to help cushion the microphone within the tube or separate multiple smaller microphones within a single tube
- Hexagonal end on each mic tube prevents your valuable microphone from rolling off flat surfaces
- Compatible microphones include:
- AKG: P170, C480 B, CK91/92/93 with SE300 B
- Audio-Technica: AT831b, AT8053a, AT4053b, Pro-37, AT 2021, AT4041
- Audix: SCX1-HC, M1280BHC
- Behringer: C-2
- Beyerdynamic: MCE 85 PV
- DPA: 4007A, 4018A, 4016, 4017C
- Neumann: KM 100, KM 180, KMD series
- Oktava: MC-012
- Rode: M5, NT-5, NT-55, NT-6
- Sanken: CS-1e
- Schoeps: CMC series, MiniCMIT
- Sennheiser: e614, e914, ME62 K6, ME64 K6, MKH 20, MKH 40, MKH 50 & MKH 8060 w/MZX
- Shure: VP82, KSM141
|
Specifications
|
|
Material
|
600D oxford nylon exterior
1/8" / 3.5 mm PVC tube case
Fabric interior lining
Polyethylene base
Foam base insert
|
Type of Closure
|
Zipper
|
Exterior Dimensions
|
Length: 7.9" / 200 mm
Diameter: 3" / 75 mm
|
Interior Dimensions
|
Microphone Tube Length: 4.9" / 125 mm to 7.1" / 180 mm
Microphone Tube Diameter: 1.4" / 35 mm
|
Carrying/Transport Options
|
Webbed carry loop and carabiner clip
|
Weight
|
8.5 oz / 240 g (excluding mic tubes and carabiner)
10.6 oz / 300 g (including mic tubes and carabiner)
1.8 oz / 50 g (mic tubes only)
|