Sonifex RB-LI2 - Stereo Line Isolation Unit

52226

Nuovo

Stereo Line Isolation Unit
Prezzo al produttore :
579,53 CHF (IVA escl.)

Nostro prezzo :

550,55 CHF


595,15 CHF (IVA incl.)  

Rectangle
Guarantee: garantie Visuals Guarantee 12 Months
In-house aftersales service: update, repair and backup.

Availability: clock Generalmente spedito entro 2 o 4 settimane

- +

52226
Dettagli  

The RB-LI2 stereo line isolation unit is used to isolate audio signals from inter-area ground hum loops, which could be caused by equipment being powered by different mains power supplies, or different phases on the same supply. The input and output are connected together through a transformer, which has internal jumpers allowing the outputs to be balanced about ground.

There is also a loop-through output, so that the RB-LI2 can be inserted into a line, forming a transformer balanced distribution point. 

The isolated outputs can be individually adjusted using pre-set potentiometers, accessible through the rear panel. The gain range of the stereo line isolation unit is -15dB to +13.5dB (28.5dB).

This unit is useful where audio is required to be driven over a relatively long length of cable. By isolating the signal using transformers, ground loop currents that can be present in non-isolated signals, are eradicated completely.


 


 



Technical Specification For RB-L12



Audio Specification



Output Impedance:



<150Ω



Distortion:



0.5% THD @ 40Hz, ref +17dBu output



Common Mode Rejection:



<64dB typically



Frequency Response:



10Hz to 36kHz ±0.5dB 



Output Gain Range:



-15dB to +13.5dB



 



 



Connections



Inputs:



2 x XLR 3 pin female (Balanced)



Isolated Outputs:



2 x XLR 3 pin male (Balanced)



Loop Outputs:



2 x XLR 3 pin male (Balanced)



Mains Input:



Filtered IEC, switchable 110-120V, or 220-240V, fused, 6W max



Fuse Rating:



Anti-surge fuse 100mA 20 x 5mm (230VAC)
Anti-surge fuse 250mA 20 x 5mm (115VAC)



 



 



Equipment Type



RB-L12::



Stereo line isolation unit



 



 



Physical Specification



Dimensions (Raw):



28cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
11” (W) x 4.3” (D) x 1.7” (H) (1U)



Dimensions (Boxed):



36cm (W) x 20.5cm (D) x 6cm (H)
14.2” (W) x 8” (D) x 2.4” (H)



Weight:



Nett: 1.1kg  Gross: 1.5kg
Nett: 2.4lbs Gross: 3.3lbs


    Hai bisogno di aiuto,
    Hai bisogno di finanziamenti,
    Chiamateci !

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menu