Sonifex RB-ML2 - Stereo Microphone & Line Level Limiter

52224

Nuovo

Stereo Microphone & Line Level Limiter
Prezzo al produttore :
551,93 CHF (IVA escl.)

Nostro prezzo :

524,33 CHF


566,81 CHF (IVA incl.)  

Rectangle
Guarantee: garantie Visuals Guarantee 12 Months
In-house aftersales service: update, repair and backup.

Availability: clock Generalmente spedito entro 2 o 4 settimane

- +

52224
Dettagli  

The RB-ML2 is a stereo microphone and line level limiter. The unit is mainly used where assistance with level control is required, for protection of mixer inputs and to prevent distortion. Ideal for news-booths, and the input to PC workstations, it provides an economical level control solution.

The RB-ML2 has two electronically balanced XLR-3 inputs, which are routed to a line amplifier, or microphone amplifier, via a rear push-button. The microphone amplifiers have independent pre-set gain controls, and DIP switches for a high pass filter (low frequency roll-off at 125Hz) and phantom power to provide +48V to the connected microphones. 

The outputs of these amplifiers are passed through a VCA limiter circuit that can operate jointly on the signals in stereo mode, or independently in dual mono mode. The rear panel mode switch changes the unit from dual mono to stereo. Stereo limiting operates by limiting both left and right outputs if either left or right input needs to be limited. Dual mono limiting operates by limiting left and right signals individually, so you can use the RB-ML2 as two separate mono mic/line limiters.

The characteristics of the limiter can be set via level threshold pre-sets. For each channel there is an input gain and a threshold level control. With the limit threshold set to maximum, the input through to output can be normalised using the input potentiometers. Once the unit is acting as a buffer with gain/attenuation, the limit threshold level can be set, with the recovery adjusted for the application. The power LED indicates limiting by flashing. 

The two XLR-3 electronically balanced outputs can be set to either line or mic output levels via a push-button. This allows the RB-ML2 to be used in line with a line or mic input on a mixer, or similar equipment.


 


 



Technical Specification For RB-ML2



Audio Specification



Maximum Input Level:



-6dBu (mic), +28dBu (line), electronically balanced



Input Impedance:



>20kΩ balanced bridging



Input Gain Range:



Adjustable +22dB to +67dB gain (mic) via 2 x pre-set potentiometers (L & R), 0dB gain (line)



Maximum Output Level:



-18dBu (mic), +28dBu (line), electronically balanced



Output Impedance:



<50Ω balanced



Output Gain Range:



Adjustable -54dB to -24dB gain (mic), -8dB to +22dB gain (line), ref 0dBu line input, gain via 2 x pre-set potentiometers



Limit Threshold:



Adjustable -8dBu to +28dBu



Frequency Response:



20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz)



Noise (RMS):



<-70dB unity gain, ref +8dBu output



Distortion:



< 0.02% THD + N @ 1kHz, ref +8dBu output, threshold set at +10dBu



Common Mode Rejection (Line):



>66dB typically



Common Mode Rejection (Mic):



>86dB typically



Phantom Power:



+48V



LF Filter:



125Hz @ 6dB/octave



 



 



Connections & Controls



Analogue Inputs:



2 x XLR 3 pin female mic or line switchable (balanced) (L & R)



Mic/Line Input Control:



2 x push-buttons for mic/line inputs



Analogue Outputs:



2 x XLR 3 pin male mic or line switchable (balanced) (L & R)



Mains Input:



Filtered IEC, switchable 110-120V, or 
220-240V, fused, 6W max.



Fuse Rating:



Anti-surge fuse 100mA 20 x 5mm (230VAC)
Anti-surge fuse 250mA 20 x 5mm (115VAC)



Mic/Line Output Control:



2 x push-button for mic/line outputs



Phantom Power & LF Filter:



1 x 4-way DIP switch



Mono/Stereo Mode Select:



1 x push-button



Limit Level Threshold Set:



2 x pre-set potentiometers



 



 



Physical Specification



Dimensions (Raw):



28cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
11” (W) x 4.3” (D) x 1.7” (H) (1U)



Dimensions (Boxed):



36cm (W) x 20.5cm (D) x 6cm (H
14.2” (W) x 8” (D) x 2.4” (H)



Weight:



Nett: 0.90kg Gross: 1.35kg
Nett: 2lbs     Gross: 3lbs


    Hai bisogno di aiuto,
    Hai bisogno di finanziamenti,
    Chiamateci !

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menu