For professionals and enthusiasts alike.
HIgh quality V-Mount, batteries and chargers for you Sony, Canon, Panasonic and Blackmagic Design Cameras.
Suitable for professional broadcast equipment. All our V-Lok batteries offer the protection required for overcharge protection, discharge protection, short circuit and thermal protection. .
Sony FX6 V-Lok
Hawk-Woods have released a Mini V-Lok camera mount plate for the Sony FX6
This plate will fit directly into the original battery port of the Sony FX6 via a mechanical BPU battery fitting. The camera needs to be powered through the provided fixed Sony fly lead, which is regulated to 19.5 volts due to the camera's DC input requirement.
2x Power-con outputs are also provided, which are un-regulated at nominal voltage
Sony FX9 V-Lok
The VLM-FX9 is a direct V-Lok fitting for Sony's FX9 camera allowing the user to use higher powered V-Lok batteries rather than BPU batteries which are the standard battery for the FX9 camera.
The adaptor attaches via the lock in mechanism in the FX9's battery compartment and then finally screwed to the top of the camera body to secure in place.
Users have the benefit of 2x Power-con (D-Tap) outputs 11 - 17 volts allowing further equipment/accessories to be powered. 1x 5V 2A USB is also available for powering or charging accessories such as mobile phones.
Power is provided via a short DC jack cable via the FX9's DC Input.
A low voltage warning LED is also situated at the top of the fitting, this is to combat the camera as it will only ever see the 19.5v in the viewfinder. So no warning would be given when the battery is low. The LED will flash at 11.5v giving you a decent warning to make a change.
Sony FX6/FX9 V-Lok
The VLM-FX9-15 is a 15mm bar adaptor suited for the FX9 and FX6 camera.
Users have the benefit of 4x Power-con (D-Tap) outputs 11 - 17 volts allowing further equipment/accessories to be powered. 1x 5V 2A USB is also available for powering or charging accessories such as mobile phones.
Power is provided via a 20cm DC jack cable via the FX9's DC Input which is regulated to 19.5v.
A low voltage warning LED is also situated at the top of the fitting, this is to combat the camera as it will only ever see the 19.5v in the viewfinder. So no warning would be given when the battery is low. The LED will flash at 11.5v, giving you a decent warning to make a change.
(Images in Gallery are subject to change)
(This will also work with the Sony FX6 camera)
Batteries and charger compatible with FX6/ FX9
The VLM-C53 from Hawkwoods is a direct camera fitting for Canon's C300 MKIII and C500 MKII camera. The Hawkwoods adaptor converts the cameras so that V-Lok batteries can be used instead of the Canon BPA batteries to greatly extend run-time.
The VLM-C53 securely attaches to the camera via two captive screws firmly locking the adaptor into place. A Power-con(D-Tap) is provided as an output for powering further accessories. The C300/C500 is powered via a fixed XLR flying lead.
The main feature of the VLM-C53 is the ability to hotswap between a V-Lok battery and the cameras internal battery system (BPA Batteries) BPA-50 BPA-98 thus allowing for continuous power without having to shut the camera down.
Batteries and charger compatible with Canon C300 / C500
Canon C200/C300 Mark II V-Lok
Hawk-Woods 15mm power adaptor for the Canon C200/C300 Mark 2, will enable you to power the camera with a V-LOK battery via a 15mm bar system.
This adaptor comes with 5x power-con outputs, and is supplied with the power cablePC-24
The extra power-con outputs will allow you to power further accessories, the adaptors outputs are all un-regulated 11-17v.
Batteries and charger compatible with Canon C200
Canon C70 V-lock
If you are looking for a more universal powering solution for your Canon C70 by powering with mini V-lok batteries this product will be perfect for you. The VLM-C70/15 will attach to a bar system and power via the 24V DC input.
By using this product, you are still able to use the BPA batteries direct with the camera. You can effectively hot-swap with this solution. The camera will always take the higher voltage first, however should you un-plug the DC input, the camera will auto switch to the BPA battery and power from it's battery port.
The VLM-C70/15 boasts 4x D-TAP outputs + 1 USB output, for powering further accessories around your camera.
Please note the DC output is regulated to 24v.
Batteries and charger compatible with Canon C70
VLM-EVA1
With the launch of the Panasonic EVA-1 camera, we have designed a mini-vl plate to suit and mount to the camera in order to provide external power.
The VLM-EVA1 plate mounts directly to the EVA-1 handle with the fixing bracket and screws provided within the product.
A fixed flying DC lead to the camera's DC input comes directly out the mini-vl plate which is regulated to 12v due to the camera's voltage input requirements.
This product also features 4x power-con outputs for powering further accessories such as monitors.
Please note you will require allen keys to mount this product to the camera.
You will be supplied with a fixing bracket and 2x screws.
Batterie and charger compatible with Panasonic EVA1
.jpg)
Blackmagic URSA V-Lok
V-Lok direct camera fitting for Blackmagics URSA 4k camera offering the user greatly extended run-times. The VL-CA9 attaches to the camera body via the fitting points on the URSA providing the electrical connection through the cameras 12 pin connector.
The VL-CA9 fitting offers 3x Power-con (D-Tap) outputs and 2x Hirose outputs allowing the user to power further accessories/equipment.
Outputs on this adapter are regulated to 12v. The regulator is good for 6 amps.
This product will also fit the URSA MINI
Batterie and charger compatible with Blackmagic Design URSA and V-Lock CA9
-
Hai bisogno di aiuto,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Hai bisogno di finanziamenti,
Chiamateci !
