For professionals and enthusiasts alike.
The Boya BY-MA2 is a 2-channels XLR audio mixer which is designed for DSLRs, camcorders and other devices which has 3.5mm TRS audio jack. BY-MA2 has 2 XLR audio inputs that allow 2 external XLR wireless microphone receivers or XLR shotgun microphones to be used on it.
5 pezzi in magazzino
Single square mic flag, white
13 pezzi in magazzino
Single triangular mic flag, black
17 pezzi in magazzino
Single square mic flag, black
16 pezzi in magazzino
Single triangular mic flag, white
19 pezzi in magazzino
The Boya XLR to Lightning Adapter BY-BCA7 can be used to record audio with an XLR male microphone.
1 pezzi in magazzino
Thread Adapter - Universal thread adapter set
5 pezzi in magazzino
The BOYA 35C-XLR Adapter converts 3.5mm mini jack input to a male XLR output, it allows you to connect a microphone with a mini jack output to a professional mixer, camera, or other device with an XLR input.
1 pezzi in magazzino
The kit includes ten CORE 4099 instrument microphones with MicroDot connectors, ten MicroDot to 3-pin XLR adapters with belt clips, ten miniature microphone cables, three violin clips, one bass clip, two guitar clips, two piano clips, six drum clips, four trumpet and sax clips, two universal clips, three clamp mounts, two stand mounts, and a case for...
The TCC M-F-B Flush Mount Kit is used to install the black TeamConnect Ceiling Medium flush to the ceiling. It comes with a TeamConnect Ceiling Medium and flush mount accessories
TCC M-S-W is used to surface mount or suspend the white TeamConnect Ceiling Medium. It comes with a TeamConnect Ceiling Medium and white housing
TCC M-S-B is used to surface mount or suspend the black TeamConnect Ceiling Medium. It comes with a TeamConnect Ceiling Medium and black housing
The TCC M-F-W Flush Mount Kit is used to install the white TeamConnect Ceiling Medium flush to the ceiling. It comes with a TeamConnect Ceiling Medium and flush mount accessories
Calibrate your Neumann monitoring system using this Monitor Alignment Kit, which provides two KH 80 DSP studio monitors, one KH 750 subwoofer, and an MA 1 measurement microphone.
The extreme SPL d:vote Core 4099 Rock Touring Kit with 4 Mics and Accessories from DPA includes four Core 4099 supercardioid microphones, four 2.2mm diameter extension cables, four XLR adapters, three drum clips, three clamp mounts, two saxophone clips, and two universal clips.
The loud SPL d:vote Core 4099 Classic Touring Kit with 4 Mics and Accessories from DPA includes four Core 4099 supercardioid microphones, four 1.6mm diameter extension cables, four XLR adapters, a guitar and a bass clip, four violin clips, two piano clips, and two cello clips.
The DPA MMC4006 Omni Microphone Capsule is a modular omnidirectional capsule with a transparent audio quality and wide frequency response. The MMC4006 yields a low noise floor, natural tone and dynamics.
Calibrate your Neumann monitoring system using this Monitor Alignment Kit, which provides a KH 750 DSP subwoofer and an MA 1 measurement microphone.
The DPA MMC4015 Wide Cardioid Microphone Capsule is a modular wide cardioid capsule with a transparent audio quality, wide frequency response and high SPL handling.
The DPA MMC4011 Cardioid Microphone Capsule is a modular cardioid capsule with a transparent audio quality, wide frequency response and high SPL handling.
The MMC-4018 from DPA is a modular microphone capsule that has a highly directional supercardioid pickup pattern with a smooth and uniform off-axis frequency response.
Equip your studio with a precisely tuned listening system with the Neumann Monitor Alignment Kit 2, which provides two gray KH 80 DSP studio monitors and an MA 1 measurement microphone.
HR-MCP2 Dual Microphone Compressor provides excellent input headroom and a transparent frequency response while keeping crosstalk and distortion well below the noise floor. Rear-panel switches allow you to choose whether each channel will operate as a mic-pre or as a studio quality compressor.
Smaller, lighter, and more acoustically transparent than their Modular Windshield System, the Nano Shield NS0-AA from Rycote redefines the standards of microphone windshield performance and versatility.
Generalmente spedito entro 4 o 5 settimane
Nano Shield Windshield Kit NS1-BA for Microphones up to 4.8" Long. Highly advantageous for boom operators, sound designers, and location recordists, the Nano Shield NS1-BA is a complete windshield and suspension setup with indoor and outdoor wind protection, a low-profile XLR cable with a built-in RF filter and a switchable low-cut filter, and more.
Generalmente spedito entro 4 o 5 settimane
Nano Shield Windshield Kit NS2-CA for Microphones up to 6.1" Long. Highly advantageous for boom operators, sound designers, and location recordists, the Nano Shield NS2-CA is a complete windshield and suspension setup with indoor and outdoor wind protection, a low-profile XLR cable with a built-in RF filter and a switchable low-cut filter, and more.
Generalmente spedito entro 4 o 5 settimane
Nano Shield Windshield Kit NS6-DD for Microphones up to 12.4" Long. Highly advantageous for boom operators, sound designers, and location recordists, the Nano Shield NS6-DD is a complete windshield and suspension setup with indoor and outdoor wind protection, a low-profile XLR cable with a built-in RF filter and a switchable low-cut filter, and more.
Generalmente spedito entro 4 o 5 settimane
Nano Shield Windshield Kit NS3-CB for Microphones up to 8" Long. Highly advantageous for boom operators, sound designers, and location recordists, the Nano Shield NS3-CB is a complete windshield and suspension setup with indoor and outdoor wind protection, a low-profile XLR cable with a built-in RF filter and a switchable low-cut filter, and more.
Generalmente spedito entro 4 o 5 settimane
Nano Shield Windshield Kit NS4-DB for Microphones up to 10.1" Long. Highly advantageous for boom operators, sound designers, and location recordists, the Nano Shield NS4-DB is a complete windshield and suspension setup with indoor and outdoor wind protection, a low-profile XLR cable with a built-in RF filter and a switchable low-cut filter, and more.
Generalmente spedito entro 4 o 5 settimane
Nano Shield Windshield Kit NS5-DC for Microphones up to 11.2" Long. Highly advantageous for boom operators, sound designers, and location recordists, the Nano Shield NS5-DC is a complete windshield and suspension setup with indoor and outdoor wind protection, a low-profile XLR cable with a built-in RF filter and a switchable low-cut filter, and more.
Generalmente spedito entro 4 o 5 settimane
Microphone head ME 5004 for the 5000 series hand-held transmitters, cardioid
The DPA MMC2011 Twin Diaphragm Cardioid Microphone Capsule is a modular cardioid capsule with a transparent audio quality, wide frequency response and interference tube. The MMC2011 yields a low noise floor and a focused pickup with minimal off-axis noise.
20 x Single Square Black Mic Flag
Generalmente spedito entro 4 o 5 settimane
20 x Single Triangular Black Mic Flag
Generalmente spedito entro 4 o 5 settimane
20 x Single Triangular White Mic Flag
Generalmente spedito entro 4 o 5 settimane
20 x Single Square White Mic Flag
Generalmente spedito entro 4 o 5 settimane
The EZ-MXA20 is a stereo mixer amplifier with one mic input and two line inputs. Bass and treble tone controls are included. An integral compressor/limiter allows a higher sound output level without clipping than is possible using a standard amplifier. The output drives 4 or 8 ohm speakers. Includes worldwide power supply (specify plug).
Nano Shield 60Hz Filter Cable 22cm, LEMO
Generalmente spedito entro 4 o 5 settimane
Nano Shield 80Hz Filter Cable 22cm, LEMO
Generalmente spedito entro 4 o 5 settimane
XS Wireless Digital Pedalboard Set. One-touch ease-of-use wireless audio set with XSW-D 6.3mm (1/4) transmitter, XSW-D Pedalboard receiver, receiver power supply, extension cable 6.3mm (1/4), belt clip and USB-A to USB-C charging cable.
The EZ-MCP1 is an in-line microphone compressor that produces consistent audio levels despite wide variations (up to 30 dB) from the microphone. It is installed between a dynamic or condenser microphone and a mic-level mixer or amplifier input. Includes worldwide power supply (specify plug).
The ST-CL2 is a miniature wall and surface mount, high performance compressor/limiter from RDL, designed to maintain a constant average output level and effective peak control over a wide range of input levels. The input and output are line level and each may be wired balanced or unbalanced.
Sennheiser XSW-D (XSWD) Wireless Digital Microphone - Instrument Base Set. XS Wireless Digital. Like any classic romance, its elegant to see, complex in theory, but intuitive in action.
Timeless and functional in design, the MAT 153-S provides a solid ground as well as a convenient microphone button for XLR-5 gooseneck microphones. The phantom power lights up the gooseneck status indicator. A convenient microphone button is featured with a bi-color light ring for clear visual feedback.
XLR-Modul
Microphone Table Stand with switch, black
The TCC M H-W is the design housing for the TeamConnect Ceiling Medium in white.
The TCC M H-B is the design housing for the TeamConnect Ceiling Medium in black.
Microphone Table Stand, black
XLR Inline Switch-Box
Phantomcable XLR, 9 m
Phantomcable XLR, 9 m
Cyclone Handle PCS Accessory Kit for Cyclone and Stereo Cyclone Windshields
Generalmente spedito entro 4 o 5 settimane
Nano Shield 60Hz Filter Cable 22cm, MZL
Generalmente spedito entro 4 o 5 settimane
Nano Shield 80Hz Filter Cable 22cm, MZL
Generalmente spedito entro 4 o 5 settimane
Nano Shield 80Hz Filter Cable 22cm, XLR3
Generalmente spedito entro 4 o 5 settimane
Nano Shield 80Hz Filter Cable 32cm, XLR3
Generalmente spedito entro 4 o 5 settimane
Nano Shield 60Hz Filter Cable 22cm, XLR3
Generalmente spedito entro 4 o 5 settimane
Nano Shield 60Hz Filter Cable 32cm, XLR3
Generalmente spedito entro 4 o 5 settimane
Pop screens provide excellent suppression of so-called pop noise, such as "p" or "t". The frame is 20 cm in diameter
The SL CM SK ceiling mic suspension kit can be used to install the mic from higher ceilings. It consists of 4 steel cables with 16.4ft (5m) length that can be adjusted to an individual installation height.
Pop screens provide excellent suppression of so-called pop noise, such as "p" or "t". The frame is 15 cm in diameter
Rugged microphone button, black
Rugged microphone button, white
This handle is designed for use with the Nano Shield however it can be used with any device or adaptor with PCS connection.
Generalmente spedito entro 4 o 5 settimane
The TCC M SFP-B is the spare front plate for the TeamConnect Ceiling Medium in black.
The TCC M SFP-W is the spare front plate for the TeamConnect Ceiling Medium in white.
The PA 100 from Neumann is a pistonphone adapter that allows you to attach a calibration tool for any 1" measuring microphone to each ear channel stud of the KU 100 dummy head. You can also calibrate each ear system separately
The SL CM EB 625 extension brackets (4 pcs) shall be used when the TeamConnect Ceiling Mic 2 is installed flush-mounted in a 2.05 feet ceiling grid.
The TCC M SK Ceiling Mic Suspension kit is for use when installing the TeamConnect Ceiling Medium in high-ceilinged rooms. It consists of three 16.4 ft (5m) steel cables that can be adjusted to fit the required installation height.
Durable table stand with 3/8" and 5/8" mounting options
The Deity VO-7U Foam Pop Filter is an accessory for the VO-7U microphone.