For professionals and enthusiasts alike.
Hook for Telescopic Hanger
Generalmente spedito entro 4 o 8 settimane
Manfrotto has pushed the envelope on their popular Nano stand with the introduction of the 5-section MS0490C Carbon Fiber Nanopole Stand The stand rises to a maximum height of 6.5 ft, has a minimum working height of 19.7 ft, a stable 39.4 inches footprint, and can support gear weighing up to 3.3 lb at maximum height mounted onto its 5/8 inches stud with...
Generalmente spedito entro 4 o 8 settimane
48"X48" 1/4 Stop Silk Scrim
Generalmente spedito entro 4 o 8 settimane
Shadow Range Colt Stand 1.0 Metre
This 10.7' C-Stand features chrome-plated steel construction and a 3-section column with 2 risers. The innovative design of the base allows the individual legs to be set at any angle allowing positioning in locations not possible with classic stands. The legs fold flat for easy storage
Generalmente spedito entro 4 o 8 settimane
This 5.7' C-Stand has black steel construction and a 3-section column with 2 risers. The innovative design of the base allows the individual legs to be set at any angle allowing positioning in locations not possible with classic stands. The legs fold flat for easy storage
Generalmente spedito entro 4 o 8 settimane
C + 40 inches Riser Section Only
Generalmente spedito entro 4 o 6 settimane
Riser Section for C+ Stand (40")
Generalmente spedito entro 4 o 6 settimane
20" C+ Riser Section (Black)
Generalmente spedito entro 4 o 6 settimane
Master Combo Stand (Silver)
Nightclub 35 Two Stage Telescopic Stand 3.5 Metre
Club 35 Two Stage Telescopic Stand 3.5 Metre
This 8.3' Stand features chrome-plated steel construction and a 3-section column with 2 risers. The innovative design of the base allows the individual legs to be set at any angle allowing positioning in locations not possible with classic stands. The legs fold flat for easy storage
Generalmente spedito entro 4 o 8 settimane
Main Casting
Generalmente spedito entro 4 o 8 settimane
This B9005R Ratchet Handle for the Strato Safe Stand is a replacement handle with a sure-grip vinyl-rubber handle end that snaps and locks into position. Its ratcheting action allows you to reposition the handle or make a series of small cranking adjustments in tight situations where a full 360-degree turn is not possible
Generalmente spedito entro 4 o 8 settimane
Sprocket Column
Generalmente spedito entro 4 o 8 settimane
Boom Arm with sliding attachement, black
Generalmente spedito entro 4 o 8 settimane
The SHAPE 20 C-Stand with sliding leg combines a black anodized aluminum finish with a black powder coating, has a maximum height of 65 / 165 cm tall, and can support up to 25 lb / 11 kg of equipment. It is made of durable aluminum and has unique aluminum locking collars and knobs.
Wheel Set with Brakes (Black)
Generalmente spedito entro 4 o 8 settimane
Wheel Set with Brakes
Generalmente spedito entro 4 o 8 settimane
10 inches C Clamp with 2-5/8 inches Pins
Generalmente spedito entro 4 o 6 settimane
Roller Stand
Telescopic Wall Spreader Kit for Pipe 1-1/2" Schedule 40 (O.d.48.3mm)
Telescopic Wall Spreader Kit for Pipe 1-1/4" Schedule
This 5.7' C-Stand has chrome-plated steel construction and a 3-section column with 2 risers. The innovative design of the base allows the individual legs to be set at any angle allowing positioning in locations not possible with classic stands. The legs fold flat for easy storage
Generalmente spedito entro 4 o 8 settimane
Anodized rail 3m long
Generalmente spedito entro 4 o 8 settimane
Boom Arm with sliding attachement
Generalmente spedito entro 4 o 8 settimane
Assembly Cable Plate
Generalmente spedito entro 4 o 8 settimane
Spring Loaded Turtle Base Only
Generalmente spedito entro 4 o 6 settimane
Stainless Steel Base Column
Generalmente spedito entro 4 o 8 settimane
Top Spider for Pipe 90mm
Generalmente spedito entro 4 o 8 settimane
Master 40" C Stand W/ Turtle Base (Black)
40" Master C-stand W/ Sliding Leg & Quick Release-black
40" Master C-stand W/ Sliding Leg & Quick Release
Master 40" C Stand W/ Turtle Base
Short Wall Boom, Black, 0.7 - 1.2m
Generalmente spedito entro 4 o 8 settimane
Assembly Chain
Generalmente spedito entro 4 o 8 settimane
Shells for Grip Head Set 5+5pc
Generalmente spedito entro 4 o 8 settimane
Master Combo Alu Senior
The Manfrotto Boom Assembly is comprised of three sections, extends to ~6.5 feet (2.1 m) and can easily be disassembled to 28 inch (71cm) for storage or transport.
Generalmente spedito entro 4 o 8 settimane
Spring Set Of 1000
Generalmente spedito entro 4 o 8 settimane
Magnetic Background Support Kit with Stand
Generalmente spedito entro 2 o 6 settimane
0 mm 2" Polyholder w/sw. Spigot
Generalmente spedito entro 4 o 8 settimane
China Silk Scrim 48" x 48"
Generalmente spedito entro 4 o 8 settimane
24" x 36" Triple Scrim Black
Generalmente spedito entro 4 o 8 settimane
Pocket 5" C-Stand
Generalmente spedito entro 4 o 6 settimane
Autopole 2 Black, 2.1 - 3.7m MT
Generalmente spedito entro 4 o 8 settimane
Master 30" C Stand W/ Turtle Base - Black
L-cheese-plate 10"(25.4cm)x 16"(40.6 Cm) With 3/8" Hole
Master 30" C Stand W/ Turtle Base
30" Master C-stand W/ Sliding Leg & Quick Release-black
30" Master C-stand W/ Sliding Leg & Quick Release
The Falcon Eyes Autopole AP-4380M is a sturdy, professional autopole which is easy to mount between floor and ceiling or between two walls and now comes in a set of 2. The autopole has an adjustable height of minimum 245 cm (2 segments) to maximum 450 cm (4 segments). This autopole is very sturdy and comes in 3 parts (1 of which is extendable).
Generalmente spedito entro 2 o 4 settimane
Spare Part Pack ML120 30pcs
Generalmente spedito entro 4 o 8 settimane
Assembly Gamb LIV + Portar. + AST AVE
Generalmente spedito entro 4 o 8 settimane
Le Maxi Stand Black
Generalmente spedito entro 4 o 8 settimane
Telescopic Poly Holder, 40mm (1,6")
Generalmente spedito entro 4 o 8 settimane
Shells for Grip Head Set 5+5pc
Generalmente spedito entro 4 o 8 settimane
Assembly Supporto C / Manopole
Generalmente spedito entro 4 o 8 settimane
Tube
Generalmente spedito entro 4 o 8 settimane
Autopole 2 2.1 - 3.7m
Generalmente spedito entro 4 o 8 settimane
Nightclub 25 Two Stage Telescopic Stand 2.5 Metre
Club 25 Two Stage Telescopic Stand 2.5 Metre
Master 20" C Stand W/ Turtle Base (Black)
20" Master C-stand W/ Sliding Leg & Quick Release
Heavy Duty Light Stand
Generalmente spedito entro 3 o 6 settimane
Master 20" C Stand W/ Turtle Base
20" Master C-stand W/ Sliding Leg & Quick Release-black
Heavy Duty Baby Stand
This 10.75' Sliding Leg C-Stand features black steel construction and a 3-section column with 2 risers. The innovative design of the base allows the individual legs to be set at any angle allowing positioning in locations not possible with classic stands. One of the legs slides along the center column to accommodate uneven terrain. The legs fold flat for...
Generalmente spedito entro 4 o 8 settimane
Autopole 2 Black 2.0-2.7m
Generalmente spedito entro 4 o 8 settimane
Silver / Gold oval reflector 120 cm
Generalmente spedito entro 4 o 8 settimane
Assembly Tube
Generalmente spedito entro 4 o 8 settimane
Assembly Tube
Generalmente spedito entro 4 o 8 settimane
All Corner for Butterfly Frame
Generalmente spedito entro 4 o 8 settimane
4"Castor Kit Combo Stands
4" Castor Kit Cine Combo Stands
4" Castor Kit Baby Roller Stands
4" Castor Kit Junior Roller/overheads
Slider with Cable Support
Generalmente spedito entro 4 o 8 settimane
Adapter 75/100 On Flowtech For Fluid Heads With 75 mm Ball On Flowtech 100
Generalmente spedito entro 4 o 8 settimane
L Bracket with Lock Bush
Generalmente spedito entro 4 o 8 settimane
All. Corner for Buterfly Frame
Generalmente spedito entro 4 o 8 settimane
Top Spider for Pipe 70mm
Generalmente spedito entro 4 o 8 settimane
Complete Leg Laser
Generalmente spedito entro 4 o 8 settimane
C Stand
Generalmente spedito in 8 settimane
Baby Kit Stand W/ Square Legs
Silver / White oval reflector 120 cm
Generalmente spedito entro 4 o 8 settimane
Gobo Plate Media (Vesa)
Generalmente spedito entro 4 o 6 settimane
Light Stand HD 300
Assembly Steel Pipe
Generalmente spedito entro 4 o 8 settimane
Autopole Black extends from 210cm to 370cm
Generalmente spedito entro 4 o 8 settimane
Autopole 2 1.5-2.7m
Generalmente spedito entro 4 o 8 settimane
Textile Soft Diffuser 4' x 4'
Generalmente spedito entro 4 o 8 settimane
Complete Leg
Generalmente spedito entro 4 o 8 settimane
Pack MLBATTADT-L7.2V Set of 6
Generalmente spedito entro 4 o 8 settimane
Base with 1 levelling leg, complete with feet
Generalmente spedito entro 4 o 8 settimane
extile White Block 4' x 4'
Generalmente spedito entro 4 o 8 settimane
Corner Assembly
Generalmente spedito entro 4 o 8 settimane
Falcon Eyes Professional Light Boom + Light Stand + Water bag LSB-5
Generalmente spedito entro 2 o 4 settimane
A folding stand base only. No wheels. It has a leveling leg extender for use on uneven terrain. Accepts 1-1/8" diameter Junior studs or stand risers. 8.3 in (21 cm) tall, 29.8 in (.75 M) footprint. Supports up to 88 lbs (40 kg)
Generalmente spedito entro 4 o 8 settimane
Complete Leg Laser
Generalmente spedito entro 4 o 8 settimane
Friction Assembly for Pantograph
Generalmente spedito entro 4 o 8 settimane
Magic Finger with 5/8inches Adapter
Assembly Plug
Generalmente spedito entro 4 o 8 settimane
Wheel Set Diam 125mm, w/brakes
Generalmente spedito entro 4 o 8 settimane
Autopole extends from 210cm to 370cm
Generalmente spedito entro 4 o 8 settimane
Assembly Bushing
Generalmente spedito entro 4 o 8 settimane
Complete Leg
Generalmente spedito entro 4 o 8 settimane
Assembly Curva C / Manopole
Generalmente spedito entro 4 o 8 settimane
Master 40" C Stand W/ Sliding Legs (Black)
Master 40" C Stand W/ Sliding Legs
Autopole 1.5 - 2.7m, Black
Generalmente spedito entro 4 o 8 settimane
Reflector translucent 185 x 120 cm oval
Generalmente spedito entro 4 o 8 settimane
Grab Clamp with Baby Bushing
Generalmente spedito entro 4 o 8 settimane
Assembly Tube
Generalmente spedito entro 4 o 8 settimane
Collar for Pipe 80mm
Generalmente spedito entro 4 o 8 settimane
Low Mighty Baby Stand
Detachable Heavy Duty C-clamp W/ 5/8"(28mm) Junior Receiver
Collar for Pipe 90mm
Generalmente spedito entro 4 o 8 settimane
Assembly Clamp
Generalmente spedito entro 4 o 8 settimane
Spring Set of 3
Generalmente spedito entro 4 o 8 settimane
Mobile and extremely stable light stand. Folding legs with lockable pivoting rollers, one leg can be leveled. Hole for standard 28 mm (1.1 in.) spigot, concealed standard 16 mm (0.6 in.) spigot.
Cheese Plate 10"X10"X1/2" With a Mitchell Insert
The Manfrotto Double Articulated Arm has three adjustable sections. The 396 Series of arms is more rigid that the 196 range to support heavier loads up to 11 lbs. Its extendable sliding arm system extends up to 34 inches in length, and features a quick lock system
Generalmente spedito entro 4 o 8 settimane
48" x 48" Silk Scrim
Generalmente spedito entro 4 o 8 settimane
Collar for Pipe 90mm
Generalmente spedito entro 4 o 8 settimane
Falcon Eyes Light Stand LM-6000HA Heavy Duty 600 cm
Generalmente spedito entro 2 o 4 settimane
This Manfrotto 146CS High Steel Stand Extension attaches to the top of your heavy duty stand and extends its height an additional 53 - 123.6" (1.4 x 3.1 m)
Generalmente spedito entro 4 o 8 settimane
Floating Leg for Wind-Up Stand
Generalmente spedito entro 4 o 8 settimane
Floating Leg for Wind-Up Stand
Generalmente spedito entro 4 o 8 settimane
C' Stand Turtle Base
C' Stand Turtle Base (Black)
Autopole 1.5 - 2.7m
Generalmente spedito entro 4 o 8 settimane
Textile Silk 4' x 4'
Generalmente spedito entro 4 o 8 settimane
Assembly Spider
Generalmente spedito entro 4 o 8 settimane
Floating Leg for Wind-Up Stand
Generalmente spedito entro 4 o 8 settimane
The MVH500AH Fluid Video Head with Flat Base from Manfrotto is designed with a wide platform, optimal for HDSLR camera bodies. Smooth and precise, it has a maximum load capacity of 17.6 lb and professional quality fluid cartridges on both its pan and tilt axes.
Generalmente spedito entro 4 o 8 settimane
Crank Case for Super Wind-Up
Generalmente spedito entro 4 o 8 settimane
Dedolight stackable stand. Small version fits Octodome soft case. Height: collapsed 87 cm (2.9) - max 250 cm (8.2) Weight: 1.3 kg (2.9 lb.)
Tempi di consegna da 4 a 6 settimane
Midi-max Kit Stand
Master 30" C Stand W/ Sliding Legs
Master 30" C Stand W/ Sliding Legs (Black)
Magic Arm with 035
Generalmente spedito entro 4 o 8 settimane
Collar for Pipe 80mm
Generalmente spedito entro 4 o 8 settimane
The Falcon Eyes CS-2450 C-Stand with Boom Arm, also known as a century stand, is a durable and strong c-stand essential for videography.
Generalmente spedito entro 2 o 4 settimane
Reverse Stand
Tempi di consegna da 4 a 6 settimane
Mount lights, cameras, or accessories with the RA-C330 C Light Stand with Boom Arm from SmallRig.
Generalmente spedito entro 4 o 5 settimane
Pack for MS0490A-1 Set of 10
Generalmente spedito entro 4 o 8 settimane
Assembly Friction 4MT
Generalmente spedito entro 4 o 8 settimane
Spring Set of 100
Generalmente spedito entro 4 o 8 settimane
Le Low Stand Black
Generalmente spedito entro 4 o 8 settimane
Assembly Giunto
Generalmente spedito entro 4 o 8 settimane
Complete Clamp Assembly
Generalmente spedito entro 4 o 8 settimane
Back Tube with Collar
Generalmente spedito entro 4 o 8 settimane
Grip Casting Complete Black
Generalmente spedito entro 4 o 8 settimane
Levleg + Wheel Carrier + Strut
Generalmente spedito entro 4 o 8 settimane
Knob with Spring Set of 100
Generalmente spedito entro 4 o 8 settimane
Assembly Tubo C / Rinforzo
Generalmente spedito entro 4 o 8 settimane
Grip Casting Complete
Generalmente spedito entro 4 o 8 settimane
Arm for Articulated Arm
Generalmente spedito entro 4 o 8 settimane
Steel Pipe with Knob
Generalmente spedito entro 4 o 8 settimane
30" x 36" Double Scrim Black
Generalmente spedito entro 4 o 8 settimane
This Manfrotto 146B High Aluminum Stand Extension attaches to the top of your heavy duty stand, and extends its height an additional 53 - 123.6" (1.4 x 3.1 m)
Generalmente spedito entro 4 o 8 settimane
The H6BAG Bag for Modular Frames is a sturdy synthetic fabric bag with webbed handles that encircle the entire bag for extra strength. The bag has zippered closure and can be used with the 4 x 4', 6 x 6', 8 x 8', 12 x 12' and 20 x 20' modular frames
Generalmente spedito entro 4 o 8 settimane
Magic Arm Alone, 630mm Long
Generalmente spedito entro 4 o 8 settimane
Heavy-weight stand with three-section air-cushioned telescope centre column. With 1/4" / 3/8" reversible thread pin, that can be attached either horizontally or vertically
Assembly Pipe
Generalmente spedito entro 4 o 8 settimane
Medium Duty Kit Stand Triple Riser - Black (20 Piece Minimum)
Generalmente spedito entro 4 o 6 settimane
The aptly named Snake Arm from Manfrotto is an ideal accessory for photographers or videographers who want to lighten their load with a compendium piece of gripware that can replace a stand or two. Fabricated with 4 sections of aluminum tubing, the 23.6" arm is able to twist into a multitude of angles and lock down via the ergonomic T-handle
Generalmente spedito entro 4 o 8 settimane
Crank Case
Generalmente spedito entro 4 o 8 settimane
Crank Case
Generalmente spedito entro 4 o 8 settimane
Medium Baby Kit Stand
48" x 48" Cutter
Generalmente spedito entro 4 o 8 settimane
COMPLETE LEVLEG SUPPORT
Generalmente spedito entro 4 o 8 settimane
Assembly Tubes
Generalmente spedito entro 4 o 8 settimane
The Manfrotto Double Articulated Arm has three adjustable sections. The 396 Series of arms is more rigid that the 196 range to support heavier loads up to 11 lbs. Its extendable sliding arm system extends up to 34 inches in length, and features a quick lock system
Generalmente spedito entro 4 o 8 settimane
Autopole 1.0 - 1.7m, Black
Generalmente spedito entro 4 o 8 settimane
Mini Autopole clamp bar, black, 2.1 - 3.7 m (1 pcs.)
Generalmente spedito entro 4 o 8 settimane
Frame Section Male 800T
Generalmente spedito entro 4 o 8 settimane
Floating Leg for Wind-Up Stand
Generalmente spedito entro 4 o 8 settimane
Mighty Runway Base Stand W/ One Extra 12cm Long Leg and Two 3/8"-16 Female Threaded
Kit Guarnizioni E Or
Generalmente spedito entro 4 o 8 settimane
Assembly Tube
Generalmente spedito entro 4 o 8 settimane
Lock Off Knob + Shoe Set 5 Pcs
Generalmente spedito entro 4 o 8 settimane
Master 20" C Stand W/ Sliding Legs
Master 20" C Stand W/ Sliding Legs (Black)
Variable Friction Magic Arm with Camera Bracket
Generalmente spedito entro 4 o 8 settimane
The Manfrotto 143A Magic Arm is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°. The lever tightens and locks for precise positioning of a small light head or camera. The Magic Arm has 5/8" studs on ball joints at both ends with 3/8 and 1/4" female threads
Generalmente spedito entro 4 o 8 settimane
Kupo Click Stands are light weight aluminum kit stands perfect for the location photographer.
Kupo Click Stands are light weight aluminum kit stands perfect for the location photographer. They collapse flat and attach to one another with a simple click for easy transportation and storage.
Complete Leg With Fastener
Generalmente spedito entro 4 o 8 settimane
The Manfrotto MBAG120PN Padded Tripod Bag (Black) is a padded ballistic nylon bag designed to carry Bogen/Manfrotto tripod with a head up to 45" long. Thermoform padding holds the tripod in place and protects it, especially the head, during transport. It also serves a double purpose by protecting the tripod's hard edges when it is carried
Generalmente spedito entro 4 o 8 settimane
Spring Set of 100
Generalmente spedito entro 4 o 8 settimane
50mm 2.0" Polyholder with 16mm Spigot
Generalmente spedito entro 4 o 8 settimane
Micro Friction Arm Kit
Generalmente spedito entro 4 o 8 settimane
24" x 36" Triple Scrim Cover
Generalmente spedito entro 4 o 8 settimane
Collar for Pipe 70mm
Generalmente spedito entro 4 o 8 settimane
Black Back Tube with Collar
Generalmente spedito entro 4 o 8 settimane
Collar for Pipe 60mm
Generalmente spedito entro 4 o 8 settimane
Sand Bag Large 35kg
Generalmente spedito entro 4 o 8 settimane
Assembly Tube + Sleeve
Generalmente spedito entro 4 o 8 settimane
Pneumatic Wheel
Generalmente spedito entro 4 o 8 settimane
Midi Baby Kit Stand
Collar for Pipe 70mm
Generalmente spedito entro 4 o 8 settimane
Plug
Generalmente spedito entro 4 o 8 settimane
Levleg + Wheel Carrier + Strut
Generalmente spedito entro 4 o 8 settimane
Rack, Mombo Combo,4x Black
Generalmente spedito entro 4 o 6 settimane
Baby Kit Stand
45mm Diameter Column + Cap & Gasket
Generalmente spedito entro 4 o 8 settimane
Collar for Pipe 60mm
Generalmente spedito entro 4 o 8 settimane
Assembly Tube and Spike
Generalmente spedito entro 4 o 8 settimane
The SHAPE aluminum lightweight Baby Kit Stand with Square Legs has a black anodized aluminum finish, has a maximum height of 12.9' / 325 cm tall, and can support up to 25 lb. / 11 kg of equipment. It is made of durable aluminum and has unique aluminum locking collars and knobs. The legs are square, and at the top, is mounted a standard 750 / 5/8" / 16mm...
Wheel Set of 3, 100mm with brakes and adapter for legs
Generalmente spedito entro 4 o 8 settimane
Infra Red Remote Control Only
Generalmente spedito entro 4 o 8 settimane
Expan Drive Set with Red Metal Chain
Generalmente spedito entro 4 o 8 settimane
Expan Drive Set with Black Metal Chain
Generalmente spedito entro 4 o 8 settimane
Expan Drive Set with Gray Metal Chain
Generalmente spedito entro 4 o 8 settimane
Expan Drive Set with Red Metal Chain
Generalmente spedito entro 4 o 8 settimane
Leg / Strut / Leg Fastener
Generalmente spedito entro 4 o 8 settimane
This Double Riser Column designed to fit into an Avenger turtle base. This black steel column starts at 46" (1.2 m) and has 3 sections and 2 risers. Its maximum length is 9.3' (2.8 m)
Generalmente spedito entro 4 o 8 settimane
Additional Spring for pantograph top 2C
Generalmente spedito entro 4 o 8 settimane
Assembly Tube + Hook
Generalmente spedito entro 4 o 8 settimane
Swiveling Pipe C Clamp W/universal Head
C Clamp W/ 1-1/4" Pipe Holder
Gold/white 95cm Oval Reflec
Generalmente spedito entro 4 o 8 settimane
Steel Sliding Leg 1290mm with Caps
Generalmente spedito entro 4 o 8 settimane
Assembly Levelling Leg
Generalmente spedito entro 4 o 8 settimane
Levleg + Wheel Carrier & Braces
Generalmente spedito entro 4 o 8 settimane
Autopole 1.0 - 1.7m
Generalmente spedito entro 4 o 8 settimane
The Manfrotto 396B-2 Articulated Arm supports up to 11 lbs with its built-in camera bracket. The 396B-2 offers excellent performance: robustness, lightness and versatility. The 396 family has been developed to provide greater rigidity and support than the 196 range, while maintaining flexibility thanks to its extendable sliding arm, further enhanced by...
Generalmente spedito entro 4 o 8 settimane
Complete Levleg Support, Black
Generalmente spedito entro 4 o 8 settimane
Steel Tube D=38
Generalmente spedito entro 4 o 8 settimane
Security Cable Set of 5
Generalmente spedito entro 4 o 8 settimane
Black Steel Pipe 25x1078 with Collar
Generalmente spedito entro 4 o 8 settimane
Grab Clamp
Generalmente spedito entro 4 o 8 settimane
Silver / White oval reflector 95 cm
Generalmente spedito entro 4 o 8 settimane
Black Steel Pipe 25x568 + Bush.
Generalmente spedito entro 4 o 8 settimane
ASS TUBO C/RINFORZO
Generalmente spedito entro 4 o 8 settimane
Levleg + Wheel Carrier & Braces
Generalmente spedito entro 4 o 8 settimane
Assembly Tube
Generalmente spedito entro 4 o 8 settimane
Central Column
Generalmente spedito entro 4 o 8 settimane
This is an 30" C-Stand Column. It is constructed of black steel, and is designed to fit into an Avenger C-Stand turtle base. Its main section is 30" long. When the 2 risers are extended, it is 6.75' (2.0 m) long
Generalmente spedito entro 4 o 8 settimane
Top Section with Collar & Stud
Generalmente spedito entro 4 o 8 settimane
Steel Pipe 35x965 with Knob
Generalmente spedito entro 4 o 8 settimane
This Double Riser Column designed to fit into an Avenger turtle base. This chrome-plated steel column starts at 46" (1.2 m) and has 3 sections and 2 risers. Its maximum length is 9.3' (2.8 m)
Generalmente spedito entro 4 o 8 settimane
Kaiser desktop lighting set 2
Levleg + Brace + Wheel Carrier
Generalmente spedito entro 4 o 8 settimane
The Manfrotto 143N Magic Arm without Camera Bracket is designed to hold a light fixture in place, in a variety of situations. It is an elbow arm, with sure locking lever control at the pivot. It will accept any light fixture up to 6.6 lbs that has a baby (5/8") receptor
Generalmente spedito entro 4 o 8 settimane
24" x 72" Cutter
Generalmente spedito entro 4 o 8 settimane
45mm Diameter Column + Cap & Gasket
Generalmente spedito entro 4 o 8 settimane
Shells for Grip Head Set 5+5 Pc
Generalmente spedito entro 4 o 8 settimane
Baby Boom - Steel
Silver/Gold 95 cm Oval Reflec
Generalmente spedito entro 4 o 8 settimane
Leg / Strut / Leg Fastener
Generalmente spedito entro 4 o 8 settimane
Black Stell Pipe 25x818 + Bush
Generalmente spedito entro 4 o 8 settimane
Sunlite / White 95cm Oval Reflector
Generalmente spedito entro 4 o 8 settimane
Steel Sliding Leg 1318 with Cap
Generalmente spedito entro 4 o 8 settimane
The Manfrotto MBAG100PN Padded Tripod Bag (Black) is a padded ballistic nylon bag designed to carry Bogen/Manfrotto tripod with a head up to 39" long. Thermoform padding holds the tripod in place and protects it, especially the head, during transport. It also serves a double purpose by protecting the tripod's hard edges when it is carried
Generalmente spedito entro 4 o 8 settimane
Assembly Tube
Generalmente spedito entro 4 o 8 settimane
40 inches Hollywood Head & Arm-Complete - Black
Generalmente spedito entro 4 o 6 settimane
C-Type Clamp with M12 Screw
Generalmente spedito entro 4 o 8 settimane
This is an 30" C-Stand Column. It is constructed of chrome-plated steel, and is designed to fit into an Avenger C-Stand turtle base. Its main section is 30" long. When the 2 risers are extended, it is 6.75' (2.0 m) long
Generalmente spedito entro 4 o 8 settimane
MP Eye Coupler Swivel Tilt 150
Generalmente spedito entro 4 o 8 settimane
Runway Base Stand
C-Stand Mini Base
Generalmente spedito entro 4 o 8 settimane
This 20" Double Riser 4.5' Column for C-Stand is designed to fit into an Avenger turtle base. It is constructed of black steel. It has 1 section, 2 risers and extends to a length of 4.5' (1.4 m)
Generalmente spedito entro 4 o 8 settimane
Safety Cable Set of 5
Generalmente spedito entro 4 o 8 settimane
Gear Z=32
Generalmente spedito entro 4 o 8 settimane
Lower Tube (Old Model)
Generalmente spedito entro 4 o 8 settimane
Assembly Tube and Spike
Generalmente spedito entro 4 o 8 settimane
Tube For Column
Generalmente spedito entro 4 o 8 settimane
Handle
Generalmente spedito entro 4 o 8 settimane
Steel Tube with Cap
Generalmente spedito entro 4 o 8 settimane
Steel Tube D=38
Generalmente spedito entro 4 o 8 settimane
Top Column With Bushing
Generalmente spedito entro 4 o 8 settimane
Top Column With Bushing
Generalmente spedito entro 4 o 8 settimane
Black Levleg + Wheel Carrier & Brace
Generalmente spedito entro 4 o 8 settimane
Steel Extension Pole, 2 Sections, 52-87"
Generalmente spedito entro 4 o 8 settimane
China Silk SCcrim 24' x 36'
Generalmente spedito entro 4 o 8 settimane
Gear Box Complete
Generalmente spedito entro 4 o 8 settimane
Tripod base with 28 mm socket, steel, black
Generalmente spedito entro 4 o 8 settimane
Mini Friction Arm
Generalmente spedito entro 4 o 8 settimane
Gear for Super Wind-Up
Generalmente spedito entro 4 o 8 settimane
Black Stell Pipe 25x818 + Bush
Generalmente spedito entro 4 o 8 settimane
Aluminium Pipe 25x955 with Collar
Generalmente spedito entro 4 o 8 settimane
40mm Diameter Column + Cap & Gasket
Generalmente spedito entro 4 o 8 settimane
Pack for B6040XK Set of 2
Generalmente spedito entro 4 o 8 settimane
Spring Type 12 Red. Additional spring for pantograph top 2C
Generalmente spedito entro 4 o 8 settimane
Steel Corner for Butterfly
Generalmente spedito entro 4 o 8 settimane
Wheel Set 100mm with Brakes
Generalmente spedito entro 4 o 8 settimane
Universal Stand W/air Cushion
Junior Stand Extension
Wall Spreader Set for Pipe 1-1/4" Schedule 40 (O.d.42.4mm)
20 inches Hollywood Head & Arm-Complete - Black
Generalmente spedito entro 4 o 6 settimane
The Double Riser 4.5' Column for C-Stand is designed to fit into an Avenger turtle base. It is constructed of chrome-plated steel. It has 1 section, 2 risers and extends to a length of 4.5' (1.4 m)
Generalmente spedito entro 4 o 8 settimane
The Manfrotto 396AB-2 Articulated Arm supports up to 11 lbs and offers excellent performance: robustness, lightness and versatility. The 396 family has been developed to provide greater rigidity and support than the 196 range, while maintaining flexibility thanks to its extendable sliding arm, further enhanced by its quick lock system
Generalmente spedito entro 4 o 8 settimane
Steel Pipe 25x568 + Collar + Bush.
Generalmente spedito entro 4 o 8 settimane
Assembly Supporto C / Manopole
Generalmente spedito entro 4 o 8 settimane
Top Column with Bushing
Generalmente spedito entro 4 o 8 settimane
Accessory kit for off-camera flash shots with two shoe-mount flashes, also suitable for lighting design with two camera lights
Aluminium Column with Collar
Generalmente spedito entro 4 o 8 settimane
Professional Variable Friction Arm
Generalmente spedito entro 4 o 8 settimane
Black Leg / Strut / Leg Fastener
Generalmente spedito entro 4 o 8 settimane
Jumbo Grip Head Black
Generalmente spedito entro 4 o 8 settimane
Universal Head Casting Japan
Generalmente spedito entro 4 o 8 settimane
Universal Head Casting Black J/V
Generalmente spedito entro 4 o 8 settimane
Aluminium Pipe 25x1105 with Collar
Generalmente spedito entro 4 o 8 settimane
Hub
Generalmente spedito entro 4 o 8 settimane
Assembly Crank
Generalmente spedito entro 4 o 8 settimane
The Manfrotto 142B Aluminum Stand Extension extends the height of your heavy duty cine stand 49.2 - 82.7" (1.2 - 2.1 m). It has two black sections, one riser
Generalmente spedito entro 4 o 8 settimane
Support for Butterfly with Knobs
Generalmente spedito entro 4 o 8 settimane
Complete Leg With Fastener
Generalmente spedito entro 4 o 8 settimane
Rotating Bushing with Pin + Cable
Generalmente spedito entro 4 o 8 settimane
Aluminium Pipe 25 x 955 with Collar
Generalmente spedito entro 4 o 8 settimane
Crank Case
Generalmente spedito entro 4 o 8 settimane
Mini Light Stand (Black, 48.5")
Tempi di consegna da 4 a 6 settimane
The Falcon Eyes LSB-2 Light Boom + Light Stand + Counterweight is supplied with a Double Tube Clamp, which is compatible with all light stands with a diameter of 3 cm.
Generalmente spedito entro 2 o 4 settimane
Light-weight stand with three-section air-cushioned telescope centre column. With 16 mm standard spigot and 3/8" connecting thread. 1/4" adapter included. Folds down flat. Setting height: approx. 88-237 cm (34.6- 93.3 in.)
Assembly Semigusci + Viterie Scatola
Generalmente spedito entro 4 o 8 settimane
Assembly L Box Cover
Generalmente spedito entro 4 o 8 settimane
Black Steel Pipe 25x1078 with Collar
Generalmente spedito entro 4 o 8 settimane
40mm Diameter Column + Cap & Gasket
Generalmente spedito entro 4 o 8 settimane
Slider with Cable Support
Generalmente spedito entro 4 o 8 settimane
Manfrotto Wind Up Maintenance Tools
Generalmente spedito entro 4 o 8 settimane
Pack for MLFILTERCOL Set of 10
Generalmente spedito entro 4 o 8 settimane
Alluminium Leg L=1240 with Cap
Generalmente spedito entro 4 o 8 settimane
Spare Part Pack ML360H 10pcs
Generalmente spedito entro 4 o 8 settimane
18" x 24" Triple Scrim Black
Generalmente spedito entro 4 o 8 settimane
Assembly Tubo
Generalmente spedito entro 4 o 8 settimane
Column Assembly
Generalmente spedito entro 4 o 8 settimane
Casting for Autopole II
Generalmente spedito entro 4 o 8 settimane
Aluminium Pipe 25 x 1105 with Collar
Generalmente spedito entro 4 o 8 settimane
Light stand bag / Roll bag medium - Easy transport of many tripods. Size 110 x 22 x 22cm.
Aluminium Pipe 25 x 820mm with Collar
Generalmente spedito entro 4 o 8 settimane
Pipe 610mmx3 with Pin
Generalmente spedito entro 4 o 8 settimane
Black Leg With Fastener
Generalmente spedito entro 4 o 8 settimane
Large Counterweight
Generalmente spedito entro 4 o 8 settimane
Micro Arm with Anti-Rotation
Generalmente spedito entro 4 o 8 settimane
Part of the Sky Track Rail System. It has a 5/8" female receptor on one side and a 1-1/8" receptor on the other. It is used to attach fixtures or accesories that have a 1-1/8" Junior spigot. Load capacity: 220 lbs (100 kg)
Generalmente spedito entro 4 o 8 settimane
Holder For 6 Backgrounds
Generalmente spedito entro 4 o 8 settimane
Complete Bushing
Generalmente spedito entro 4 o 8 settimane
Assembly Tubo
Generalmente spedito entro 4 o 8 settimane
Allum Pipe 25x820 with Collar
Generalmente spedito entro 4 o 8 settimane
Allum. Pipe 25x568 + Collar + Bush.
Generalmente spedito entro 4 o 8 settimane
Gear Box Complete
Generalmente spedito entro 4 o 8 settimane
Master Shorty Stand
A boom is an essential tool for positioning a light fixture either directly above the photographer videographer or cinematographer to create a beautiful flat light or positioned above the subject acting as a hair light.
Steel Pipe 40x1117 with Collar
Generalmente spedito entro 4 o 8 settimane
Castor Kit (Followspot, Studio 2000,3500,5000)
Steel Pipe 25x1078 with Collar
Generalmente spedito entro 4 o 8 settimane
This A2007 Mini Base for C-Stand has a 1 1/8" receiver and is designed to accept Avenger column risers of various sizes. It is constructed of chrome-plated steel. The smaller footprint of this base enables the c-stand to be placed in crowded areas on the set
Generalmente spedito entro 4 o 8 settimane
Castor Kit (Easylift)
The Kupo Single Handed Stand is a 8' aluminum lightweight kit stand essential for the solo location photographer.
Assembly Wheel Position Stopper
Generalmente spedito entro 4 o 8 settimane
Bottom Column For Low Base Windup
Generalmente spedito entro 4 o 8 settimane
Wind Bracing Kit for 087NW
Generalmente spedito entro 4 o 8 settimane
Knob Set Of 100
Generalmente spedito entro 4 o 8 settimane
Assembly Tube + Sleeve
Generalmente spedito entro 4 o 8 settimane
Fixed Baby Side Arm
Generalmente spedito entro 4 o 8 settimane
Brake Bushing
Generalmente spedito entro 4 o 8 settimane
Pack for MLSPECTRA2 Set of 6
Generalmente spedito entro 4 o 8 settimane
Steel Sliding Leg 915mm w/Caps
Generalmente spedito entro 4 o 8 settimane
The Claw
Generalmente spedito entro 4 o 6 settimane
Telescopic Crossbar
Generalmente spedito entro 2 o 6 settimane
Assembly Croc Inf + Manop Avenger
Generalmente spedito entro 4 o 8 settimane
Tripod Bag Padded 120cm
Generalmente spedito entro 4 o 8 settimane
Manfrotto Nanopole Stand
Generalmente spedito entro 4 o 8 settimane
With 4 risers and baby pin (5/8") made of very lightweight but durable aluminium. Extends from 19.5 in to 7 ft 6 in (50 cm to 229 cm).
10"X42" CUTTER
Generalmente spedito entro 4 o 8 settimane
Pivoting Clamp
Generalmente spedito entro 4 o 8 settimane
Assembly Main Casting + Knob
Generalmente spedito entro 4 o 8 settimane
Steel Pipe 25x818 with Collar Black
Generalmente spedito entro 4 o 8 settimane
Long Pipe for Butterfly Frame
Generalmente spedito entro 4 o 8 settimane
Assembly Spider
Generalmente spedito entro 4 o 8 settimane
The LM-1650HA from Falcon Eyes is an extra sturdy tripod with thick tubes and a compact spreading position.
Generalmente spedito entro 2 o 4 settimane
Falcon Eyes Autopole AP-4500H H 1,50/4,50 m
Generalmente spedito entro 2 o 4 settimane
dedolight stand, small. Available only in combination with K200-3 Kit.
Tempi di consegna da 4 a 6 settimane
Universal Stand
10" C-type W/ Baby Stud
18" China Ball Bracketw/e27 Socket
18’’ China Ball Bracket W/e27 Scoket
Allumin. Pipe 25x1078 with Collar
Generalmente spedito entro 4 o 8 settimane
Tube + Sleeve
Generalmente spedito entro 4 o 8 settimane
Assembly Shell for Wheel
Generalmente spedito entro 4 o 8 settimane
Bottom Casting
Generalmente spedito entro 4 o 8 settimane
Steel Pipe 25x818 with Collar
Generalmente spedito entro 4 o 8 settimane
Universal Head Casting
Generalmente spedito entro 4 o 8 settimane
Suction Cup
Generalmente spedito entro 4 o 8 settimane
Baby Drop Down
Generalmente spedito entro 4 o 6 settimane
Super Clamp Grip Head
Generalmente spedito entro 4 o 8 settimane
Flextension Kit with Flag
Generalmente spedito entro 4 o 8 settimane
Universal Head Casting
Generalmente spedito entro 4 o 8 settimane
Assembly Tube
Generalmente spedito entro 4 o 8 settimane
Assembly Gamb LIV Black + Portar. + Ast
Generalmente spedito entro 4 o 8 settimane
Pack for A2018L Set of 5
Generalmente spedito entro 4 o 8 settimane
Pack for 387XU Set of 2
Generalmente spedito entro 4 o 8 settimane
Bottom Column for Wind-Up + Cap
Generalmente spedito entro 4 o 8 settimane
Aluminum Leg L=962 with Cap
Generalmente spedito entro 4 o 8 settimane
Inner Carton Set of 10
Generalmente spedito entro 4 o 8 settimane
3rd Tube Section for A330
Generalmente spedito entro 4 o 8 settimane
Levleg & Brace + Knob
Generalmente spedito entro 4 o 8 settimane
Universal Head Casting 25mm 5/8
Generalmente spedito entro 4 o 8 settimane
Steel Tube D=38
Generalmente spedito entro 4 o 8 settimane
Assembly Crank
Generalmente spedito entro 4 o 8 settimane
Main Casting
Generalmente spedito entro 4 o 8 settimane
Tube Kit for 1005BAC
Generalmente spedito entro 4 o 8 settimane
Spring Type 4 Blue. Additional spring for pantograph top 4C
Generalmente spedito entro 4 o 8 settimane
The Manfrotto MBAG90PN Padded Tripod Bag (Black) is a padded ballistic nylon bag designed to carry Bogen/Manfrotto tripod with a head up to 35" long. Thermoform padding holds the tripod in place and protects it, especially the head, during transport. It also serves a double purpose by protecting the tripod's hard edges when it is carried
Generalmente spedito entro 4 o 8 settimane
Steel Pipe 25x930 with Collar
Generalmente spedito entro 4 o 8 settimane
Wheel Set of 3, 75mm with brakes and adapter for legs
Generalmente spedito entro 4 o 8 settimane
Bottom Casting
Generalmente spedito entro 4 o 8 settimane
Universal Head Casting Black
Generalmente spedito entro 4 o 8 settimane
Upper Tube Section for A410C
Generalmente spedito entro 4 o 8 settimane
4th Tube Section for A330
Generalmente spedito entro 4 o 8 settimane
Dia. 100mm Caster W/brake ( Set of 3)
Steel Sliding Leg 1318mm with Cap
Generalmente spedito entro 4 o 8 settimane
Universal Head Casting Black
Generalmente spedito entro 4 o 8 settimane
24" x 30" Double Scrim Cover
Generalmente spedito entro 4 o 8 settimane
Expan
Generalmente spedito entro 4 o 8 settimane
Light stand AutoFold L
Bottom Aluminium Tube for A330
Generalmente spedito entro 4 o 8 settimane
Assembly Body
Generalmente spedito entro 4 o 8 settimane
Assembly Tube + Sleeve
Generalmente spedito entro 4 o 8 settimane
Assembly Universal Bushing
Generalmente spedito entro 4 o 8 settimane
Steel Pipe 25x461 + Collar + Bush.
Generalmente spedito entro 4 o 8 settimane
25mm Column
Generalmente spedito entro 4 o 8 settimane
Leg & Brace + Wheel Holder
Generalmente spedito entro 4 o 8 settimane
Wheel Support
Generalmente spedito entro 4 o 8 settimane
Master Classic Stand
Dia. 100mm Caster W/brake, W/30mm Square Adapter (Set of 3)
Light stand bag / Roll bag small - Accommodates 4 tripods.Size 90 x 19 x 19cm.
Light stand bag / Stand bag medium - Easy transport for multiple stands. Size 110 x 24 x 22cm
Mc for 420NSB Set of 4
Generalmente spedito entro 4 o 8 settimane
Assembly Semigusci + Viti Scat. Arr
Generalmente spedito entro 4 o 8 settimane
Black Levleg + Strut + Rivet
Generalmente spedito entro 4 o 8 settimane
Pelican Gaffer Grip
Generalmente spedito entro 4 o 8 settimane
Assembly Giunzione C / Manopole
Generalmente spedito entro 4 o 8 settimane
Self Locking Collar
Generalmente spedito entro 4 o 8 settimane
Holder For 4 Backgrounds
Generalmente spedito entro 4 o 8 settimane
The Kupo 045 medium lighting stand comes complete with four risers, allowing it to reach over 4m in height.
Suction cup for small fixtures and lightweight equipment
Generalmente spedito entro 4 o 8 settimane
The Sky Track Rail System is a modular overhead lighting suspension system which can be expanded or modified to your requirements. It provides prcise positioning of lights with ease and speed, eliminating the clutter of light stands and power cables on the floor. The system utilizes a combination of rails, carriages, telescopic posts, and manual...
Generalmente spedito entro 4 o 8 settimane
Steel Pipe 25x1078 with Collar
Generalmente spedito entro 4 o 8 settimane
Mini Autopole
Generalmente spedito entro 4 o 8 settimane
Assembly Body
Generalmente spedito entro 4 o 8 settimane
Extension Column (Max. 302cm)
Extension Column (Max. 302cm) -black
Pack for MA050ASC Set of 10
Generalmente spedito entro 4 o 8 settimane
Black Steel Pipe 25x1078 with Collar
Generalmente spedito entro 4 o 8 settimane
Assembly Tubo
Generalmente spedito entro 4 o 8 settimane
Century Stand Base
Century Stand Base(Black)
Handheld Tripod W/1/4 Male Thread
Steel Sliding Leg 915mm with Caps
Generalmente spedito entro 4 o 8 settimane
Assembly Pipe 20x1,5x975
Generalmente spedito entro 4 o 8 settimane
Cable Support for Butterfly Frame
Generalmente spedito entro 4 o 8 settimane
A staple on any film or video set, the Manfrotto 175F-2 Cold Shoe Clamp is a great way to lighten your gear bag while utilizing your on-camera flash to light your subject.
Generalmente spedito entro 4 o 8 settimane
Pack for 5001b Set of 10
Generalmente spedito entro 4 o 8 settimane
Top Section with Adjusting Collar
Generalmente spedito entro 4 o 8 settimane
Universal Head Castring
Generalmente spedito entro 4 o 8 settimane
Aluminium Pipe 25X890 with Collar
Generalmente spedito entro 4 o 8 settimane
Steel Tube 35x1,2x2440
Generalmente spedito entro 4 o 8 settimane
Steel Sliding Leg for A420/430
Generalmente spedito entro 4 o 8 settimane
Steel Pipe 25x818 + Collar + Bush.
Generalmente spedito entro 4 o 8 settimane
Steel Pipe 25x1078 with Collar
Generalmente spedito entro 4 o 8 settimane
Extension Column (Max. 227cm)
Waterproof Arm Sleeve Cover for Steadicam(Set of 2)
C-Stand Riser Column
Crank Handle Complete with Shaft
Generalmente spedito entro 4 o 8 settimane
Tripod Bag Padded 100cm
Generalmente spedito entro 4 o 8 settimane
Lever Set of 5
Generalmente spedito entro 4 o 8 settimane
Spring Type 4 Red. Additional spring for pantograph top 2C
Generalmente spedito entro 4 o 8 settimane
Levleg & Brace, Black + Knob
Generalmente spedito entro 4 o 8 settimane
Black Steel Pipe 25x670 with Collar
Generalmente spedito entro 4 o 8 settimane
Assembly Tube + Knob
Generalmente spedito entro 4 o 8 settimane
Alluminum Pipe 45x1,5x1900
Generalmente spedito entro 4 o 8 settimane
Assembly Column 30 + Codolo
Generalmente spedito entro 4 o 8 settimane
Assembly Knob Set of 5
Generalmente spedito entro 4 o 8 settimane
Alluminum Pipe 40x1,5x2000
Generalmente spedito entro 4 o 8 settimane
Leg & Brace + Wheel Holder
Generalmente spedito entro 4 o 8 settimane
Top Section with Adjusting Collar
Generalmente spedito entro 4 o 8 settimane
Background Holder Hooks for 6 Backgrounds. Wall Mountable
Generalmente spedito entro 4 o 8 settimane
Versatile 15cm (5.9") friction arm with interchangeable 1 /4" attachments and additional 3/8 adapter included. Attachments can easily be replaced by using the included hex key included and are compatible with a range of different adapters
Generalmente spedito entro 4 o 8 settimane
Extention Bl. 2 SECT.75 To 110
Generalmente spedito entro 4 o 8 settimane
24" x 36" 1/4 Stop Silk Scrim
Generalmente spedito entro 4 o 8 settimane
24" x 36" Double Scrim Cover
Generalmente spedito entro 4 o 8 settimane
Assembly Tube
Generalmente spedito entro 4 o 8 settimane
Spacer for Spider Stop D 90mm
Generalmente spedito entro 4 o 8 settimane
Bottom Column For Wind-Up + Cap
Generalmente spedito entro 4 o 8 settimane
Steel Pipe 40x905mm
Generalmente spedito entro 4 o 8 settimane
Steel Pipe 25x1078 with Collar
Generalmente spedito entro 4 o 8 settimane
Aluminium Pipe 25x1078 with Collar
Generalmente spedito entro 4 o 8 settimane
Bag for Dots and Fingers Kit
Generalmente spedito entro 4 o 8 settimane
Crank Handle with Pin for Wind Up
Generalmente spedito entro 4 o 8 settimane
40" Extension Arm + Grip Head
Generalmente spedito entro 4 o 8 settimane
Falcon Eyes Wall Boom WB-2100
Generalmente spedito entro 2 o 4 settimane
Falcon Eyes Autopole AP-4380M H 2,45/4,50 m
Generalmente spedito entro 2 o 4 settimane
Falcon Eyes Autopole AP-3500H H 1.50/3.50 m
Generalmente spedito entro 2 o 4 settimane
Safety air cushion for shock-absorbing. Free to adjust the height from 94 cm to 280cm. Made of high-strength, durable metals. Quick and efficient on/off the flip lock. Flat stainless steel 1/4"-20 threaded adapter for higher compatibility and securer accessory connection.
Generalmente spedito entro 4 o 5 settimane
Aluminium Pipe 25 x 890 Mm with Collar
Generalmente spedito entro 4 o 8 settimane
Tube
Generalmente spedito entro 4 o 8 settimane
This Manfrotto R545,04 Complete Leg Assembly is a spare or replacement part for the 545B, 545GB, 546B, and 546GB tripods.
Generalmente spedito entro 4 o 8 settimane
Steel Rod 30x30x900
Generalmente spedito entro 4 o 8 settimane
Half Arm with 1/4" Attachment
Generalmente spedito entro 4 o 8 settimane
Black Steel Pipe 25x568 with Collar
Generalmente spedito entro 4 o 8 settimane
Bag for Kit STAT./ ASTA
Generalmente spedito entro 4 o 8 settimane
Flexible Arm without Spigot
Generalmente spedito entro 4 o 8 settimane
Swivel Grip Head, Black
Generalmente spedito entro 4 o 8 settimane
Assembly Tube + Sleeve
Generalmente spedito entro 4 o 8 settimane