For professionals and enthusiasts alike.
Filtri
Academy Award winning manufacturers of motion control and robotic cameras for film & TV broadcast industries
Academy Award winning manufacturers of motion control and robotic cameras for film & TV broadcast industries
TITAN SLIDER 1000mm / 39.3in. Price shown is for the slider rail only. Case, tripod mount, dual support or drive not included in this price and should be added seperatly.
Stepper motor kit with 185w PSU and AION IQ controller - Bundle Pricing.
ATLAS Servo motor for heavier payloads and faster speeds. Controller and power supply not included and will need to be added.
TITAN SERVO DRIVE. (need to add controller and PSU)
Single axis (pan) head with manual tilt positioning suitable for DSLR/Mirrorless cameras. Controller and power supply not included and will need to be added.
Single axis (pan) head with manual tilt positioning suitable for PTZ cameras only.
32.5cm (1ft turntable), Rotary surface for product photography and video, for products up to 20kg. Controller and power supply not included and will need to be added.
Lens motor kit for use with Sony ENG cameras.
ATLAS 2m / 200cm Rail section
ATLAS Rail Dolly with accessories (Mark 2)
The Advanced FreeD Sync Box allows the merge of up to 3 separate FreeD streams into a single X,Y,Z output to a graphics systems. Particularly used with multiple axis robotics such as MRMC's LLS and RLS robotic systems.
Advanced automated subject tracking software for control of up to x3 MRMC or Slidekamera by MRMC pan/tilt head or x3 PTZ. Software ONLY.
Slidekamera Slideye 2.0 software. Dedicated software for controlling SLIDEKAMERA devices over Ethernet
Foot controllers to pair with the Kairos for using multiple axex simultanteously
ATLAS 1.5m / 150cm Rail section
ATLAS 1.2m / 120cm Rail section
Standard Lens motors
TITLA Nucleus-M Lens Control Kit - Full Kit w/ Hard Case. Includes: x1 Wireless FIZ Hand Unit, x2 Brushless wireless motors with 19mm rod support and 15mm rod bushings, x1 Wireless Handle Right (x1 Finger Wheel, x1 Zoom Toggle) x1 Wireless Handle Left (x1 Finger Wheel), x4 Follow Focus Marking Discs, x1 74cm 7-pin to P-tap motor power cable, x1 55cm 7-pin...
320w PSU with ethernet connectivity, required for controlling multiple robots. (Recommended)
ATLAS Rail 0.8m / 80cm Rail section
TITLA Nucleus-M Lens Control Kit - Full Kit w/ Hard Case.
ATLAS Stepper motor, used for smaller payloads and lower speeds. Controller and power supply not included and will need to be added.
TITAN STEPPER DRIVE. Motor to turn TITAN Slider from manual to powered (need to add controller and PSU)
Slidekamera ATLAS MODULAR Case - 2.0m
ORION MODULAR travel transport case for 100cm slider rail
ATLAS 3m 50mm Cable Guide starter kit for 3m ATLAS rail sections. Includes ATLAS dolly connection, 3m drag chain at 50mm wide and drag chain trays.
Single tripod for elevating QRS system with 3/8" universal mount and 100mm bowl adapter with 75/100mm quick mount plate.
ATLAS 3m 30mm Cable Guide starter kit for 3m ATLAS rail sections. Includes ATLAS dolly connection, 3m drag chain at 30mm wide and drag chain trays.
MHC Software license for direct control applications of pan / tilt heads and robotics by MRMC and Slidekamera by MRMC. Compatible with 3rd party PTZ cameras.
Transport case for TITAN 1500 Slider.
BOLD Jib additonal 1200mm/47.2in sections
HEAVY GIANT TRIPOD with Euro Mount Male. Recommended with Bold Jib.
Adapter mount to attach a DJI RONIN Gimbal system to sliders. Best used with Kairos controller for controlled movements
ATLAS MODULAR travel transport case for 0.8m and 1.2m slider rail
Hard transport case with custom foam for Pan Bars.
ATLAS 0.8m and 1.2m 30mm Cable Guide starter kit for 0.8m and 1.2m ATLAS rail sections
ORION MODULAR travel transport case for 150cm slider rail
185w PSU to power a single device , slider drive or remote head.
HEAVY GIANT TRIPOD, flat plate with 3/8 thread. Recommended with Bold Jib.
The AFC FreeD output license unlocks the capability for the AFC robotic head to output FreeD data, which then can be integrated into graphics systems for live productions.
Transport case for TITAN 1000 Slider.
ATLAS MODULAR travel transport case for 1.2m slider rail
A riser pole to raise MRMC heads by 50cm.
GIANT TRIPOD 920: 92cm-179cm with 150mm bowl mount
GIANT TRIPOD 920: 92cm-179cm with 75/100mm bowl mount
Advanced automated subject tracking software for control of x1 MRMC or Slidekamera by MRMC pan/tilt head or x1 PTZ. Software ONLY.
ATLAS 2m 50mm Cable Guide starter kit for 2m ATLAS rail sections
GIANT TRIPOD 920: 92cm-179cm with 100mm bowl mount
GIANT TRIPOD 920: 92cm-179cm with 75mm bowl mount
GIANT TRIPOD 700: 70cm-125cm with 75/100mm bowl mount
ATLAS 2m 30mm Cable Guide starter kit for 2m ATLAS rail sections. Includes ATLAS dolly connection, 2m drag chain at 30mm wide and drag chain trays.
GIANT TRIPOD 700: 70cm-125cm with 75/100mm bowl mount
GIANT TRIPOD 920: 92cm-179cm TRIPOD ONLY
ATLAS 3m 30mm Cable Guide extender kit for 3m ATLAS rail sections. Includes additional 3m drag chain at 30mm wide and drag chain trays.
ATLAS 3m 50mm Cable Guide extender kit for 3m ATLAS rail sections. Includes additional 3m drag chain at 50mm wide and drag chain trays.
Additional reflectors for MRMC Laser Positional System. Price shown is for x1 reflector.
GIANT TRIPOD 700: 70cm-125cm with 100mm bowl mount
GIANT TRIPOD 700: 70cm-125cm with 75/100mm bowl mount
Adds an additional x1 pan/tilt or PTZ control license in to your existing Polymotion Chat Pro software. This license add-on is valid and compatible with a pre-installed versions of Polymotion Chat Pro only.
Allows for an AFC robotic head to be wall mounted.
GIANT TRIPOD 700: 70cm-125cm TRIPOD ONLY
ATLAS 1.5m 30mm Cable Guide starter kit for 1.5m ATLAS rail sections. Includes ATLAS dolly connection, 1.5m drag chain at 30mm wide and drag chain trays.
ATLAS 1.2m 30mm Cable Guide starter kit for 1.2m ATLAS rail sections. Includes ATLAS dolly connection, 1.2m drag chain at 30mm wide and drag chain trays.
Hard transport peli case for AFC head.
ATLAS 0.8m and 1.2m 30mm Cable Guide extender kit. Includes additional 0.8m and 1.2m drag chain at 30mm wide and drag chain trays
Heavy duty AFC tilt plate & camera platform
MRMC QRS first rail kit, adds connectors and bumper system. For first time buyers of this system only.
QRS-1 first rail kit, for rails that are 6m or longer, adds in all of the basic QRS track to dolly connections and end bumper system for QRS-1 track sections. This is required for each configured QRS-1 system. Compatible with 50mm cable guide.
Integrated Slidelink 3.0 network module for Slidekamera devices to use the Ethernet connection without PSU320E and for custom setups.
Lens support bracket for longer lenses.
Communication module for Ethernet connection. Enables the drive to work using the network on large distances. Creates bridge for software, like Dragonframe or Slideye 2.0.
ATLAS 2m 50mm Cable Guide extender kit for 2m ATLAS rail sections.
ATLAS Rail Bracket with Pneumatic Bumpers (2pc set)
80cm lens cable for control of Canon lenses with MRMC robotic systems.
100cm lens cable for control of Fujinon lenses with MRMC robotic systems.
80cm lens cable for control of Fujinon lenses with MRMC robotic systems.
ATLAS 2m 30mm Cable Guide extender kit for 2m ATLAS rail sections. Includes additional 2m drag chain at 30mm wide and drag chain trays.
MRMC Fujinon Box Lens 14w to 9w DSUB Female control cable. For control between the MRMC Ultihead and robotic heads to Fuji Box lenses.
MRMC Canon Box Lens Serial to Digital Control Cable. For control between the MRMC Ultihead and robotic heads to Canon Box Lens.
Specially designed mounting plate, for connection of MRMC robotic heads to be mounted on standard scaffold tubing.
Pair of wall mount kits for MRMC QRS rail, 1 set per 3m
Pair of ceiling mount kits for MRMC QRS rail, 1 set per 3m
Slidekamera VARIO - High Hat SET
High hat bowl riser for 150mm bowl - Euro Mount Version
ATLAS 1.5m 30mm Cable Guide extender kit. Includes additional 1.5m drag chain at 30mm wide and drag chain trays.
Intuitive 2 axis controller for pan tilt heads with joystick ideal for jib solutions
PTZ license code for a Slidelink adapter
Simple intuitive controller for Slidekamera control
ATLAS 1.2m 30mm Cable Guide extender kit. Includes additional 1.2m drag chain at 30mm wide and drag chain trays.
High hat bowl riser for 75/100mm bowl - Euro Mount Version
Mitchell Mount adapter used for attaching MRMC Robotic Heads: AFC-100, AFC180, PTA-2, and PTA-2B to a tripod with a Mitchell Mount type adapter.
High hat bowl riser for 100mm bowl - Euro Mount Version
Track buffer system for Studiobot track solutions.
High hat bowl riser for 75mm bowl - Euro Mount Version
FUJINON - Hirose 20-pin (Broadcast LCS)
PDMOVIE - mini-LEMO 6-pin (Broadcast LCS)
TILTA Nucleus-M - mini-LEMO 7-pin (Broadcast LCS)
Control L0M4 mini-Lemo control extender cable. Includes 1m extension cable for the L0M4 control cable. To extend the cables to the desired length, add in the total number of meters required with this L0M4 extender cable option.
Adds larger mounting area for wider cameras to be compatible with an AFC.
Riser plate to raise camera height positioning on an AFC Head by 110mm.