For professionals and enthusiasts alike.
HighSecLabs Secure 1Port HDMI KVM Isolator
Adder Secure 4-port Remote Control Unit
The RDL D-RCX1 Room Control features pushbutton UP/DOWN volume adjustment, and pushbutton selection between MUSIC and LOCAL (microphones and/or line level inputs). This standard RCX remote control mounts in an RDL WB-1U Wall Box.
KVM Switch 2-Port HDMI video
FAN-34FD is a replacement fan array for the VS-34FD matrix switcher. VS-34FD matrix switcher includes 2 fan arrays.
Secure Isolator 1-Port Video DVI-I
Secure Isolator 1-Port Video HDMI
KVM Switch 2-Port DVI-I video
Audio Diode USB to Analog with Mic. and USB Camera Support
Audio Diode USB To Analog with Microphone support
8 channel Command and Control LED ID Expansion Box
Extend the capabilities of your INOGENI CAM230 or CAM300 switcher using the REMTOE CAM Control Keypad and its single RJ45 connection port and RS-232 serial control. The keypad includes six control buttons to toggle between cameras connected to your main switcher unit. Included with the control panel is a 10' Ethernet network cable to perform long cable...
Generalmente spedito entro 1 o 2 settimane
The RDL EZ-HSX4 4 Channel Audio Switcher is a simple device that effectively switches between 4 consumer audio sources. Four RCA stereo inputs accomodate consumer line-level devices, and 1/4" phone and 1/8" (3.5mm) mini headphone outputs are features on the front panel. Includes worldwide power supply (specify plug).
Annual Software Updates Subscription for 30 Devices
Audio Diode Analog To Analog with Microphone support
SFP+ module CAT-X RJ45 10GbE
299W POWER SUPPLY UNIT (APS299W)
The TX-AVX is the ideal choice in installations where automatic switchover to an alternate video source is needed when the primary signal is lost. The unique power supply input allows the TX-AVX to be powered from a wide variety of existing ac or dc power sources.
8 Button Remote Control Switch
The EZ-SX4 is a stereo audio source selector with an output volume control that adjusts the line-level output. This unit is ideal as a four input source selector feeding an associated audio amplifier. The user can conveniently select an audio source and adjust the level on the front panel. Includes worldwide power supply (specify plug).
Audio Diode USB To Analog w/o Microphone support
2-Port KM Switch
Replacement Fan Array for VS1616DN Matrix Switcher
150W POWER SUPPLY UNIT
250W POWER SUPPLY UNIT
The TX-VCR is the ideal choice in installations where a control signal is needed based on the absence or presence of valid video signals. The unique power supply input allows the TX-VCR to be powered from a wide variety of existing ac or dc power sources
FA10A-4 is an audio diode that mitigates the risks of eavesdropping, when using peripheral audio devices, by forcing unidirectional audio flow and a using low-pass filter.
Designed for use with their CCS4-USB or CCS-PRO4 switches with firmware 2.0 or above, the LED Light Module Kit from Adder ships with four LED modules which can be attached to individual video monitor displays.
Single 10G HDBaseT & Ethernet Power Injector
The DB-SFRC8L Audio Selector is a SourceFlex module for wall mounting in a room, providing source selection from up to 8 audio sources. A numeric display shows the selected source. There are two line-level audio outputs on the rear of the unit, balanced and unbalanced, to feed an external power amplifier. The balanced line output level is +4dBu nominal...
Audio Diode USB to Analog always open no mic, no AT.
Audio Diode Analog to Analog always open no mic, no AT
The ST-LCR3 Logic-Controlled Relay (Dual Alternate Pulse) is a device designed for use in installations where momentary pulses are needed from a single control signal. This module provides a momentary pulse when a logic signal on its input initially becomes active. A separate momentary pulse is provided when the input becomes inactive.
25Gb SFP28 SR (short range multimode) Transceiver for 25Gb Ethernet Switches, Adapters and NICs
RC4-8P8C remote control unit can be used to provide direct push button access to any channel from your desktop.
Twinax cable (DAC) for 10Gbps audio network, 3 m
The ST-LCR2 Logic-Controlled Relay (Latching) is a device that provides double-pole double-throw dry switching contacts and LED indicators for relay closure. This unit uses alternate-action switching and should be used in installations where momentary pulses must alternately toggle on-off switching contacts.
HSL USB eLock Blank Plug Kit
The ST-LCR1H 8-Amp High-Power Logic-Controlled Relay is a device that provides 8-amp dry-switching relay contacts for high-power switching. These contacts are well suited for switching many 8 Ohm, 70.7V, or 100V speaker lines, although the module can be used with virtually any type of control signal.
10Gb SFP+ SR (short range multimode) Transceiver for 10Gb Ethernet Switches, Adapters and NICs
The ADDERView DDX VGA CAM from Adder creates a connection between your DDX30/DDX10 switch or DDX USR user station to a computer system, featuring a VGA and USB port.
The ST-SSR1 offers absolutely silent switching between two line-level audio input signals. It may also be used as a silent on/off switch for a single channel. The ST-SSR1 can be programmed by the user for either fast or soft switching. The unit is built into an extremely compact housing for installation almost anywhere.
The ST-RX2 is a one-in, two-out line-level routing switch and a part of the "Stick-On" line. Anywhere you need to send an audio signal to one of two destinations, the ST-RX2 is an ideal companion. It offers solid-state switching to route the signal to one of the balanced outputs with an off attenuation better than 80dB at all frequencies; no relays or...
The 4x1VB is a high-performance switcher for composite video signals. It switches any one of four signals to a single output.
The VS-4X is a high-performance switcher for balanced stereo audio signals on XLR connectors. It switches any one of four stereo signals to a single stereo output.
The ST-VOX1 is a compact voice-activated audio controlled relay in the "Stick-On" line of products. The ST-VOX1 can be triggered directly from an unbalanced microphone when used in intercom or talkback applications. In many of those applications, the microphone signal must be preamplified, making the ST-VOX1 an great partner to the STM-1 preamp.
The ST-TC1 is intended to be connected to an on-site telephone system switching unit KSU. It is not intended to be connected directly to a telephone CO line. Connections from the ST-TC1 go into the telephone switching unit as if the ST-TC1 was an incoming phone line.
The ST-SX4 is a four-input, single-output audio switcher in RDL's "Stick-On" line of products. It will send any one of the four unbalanced audio signals to the unbalanced output, or all of the sources may be switched off. A single input terminal provides control of the unit.
CTRL Professional service. Price per programming hour
The stainless steel DS-RT2 Remote Control Selector is designed to turn on and off an audio or video source. Only one output terminal is needed for triggering, therefore a single shielded pair (3-conductor cable) is required for remote connection. For more complex switching networks, both outputs (ON and OFF) may be used.
The ST-ACR1M is an audio controlled relay and part of RDL's "Stick-On" series of equipment. It is designed for reliable operation and quick, easy installation. The ST-ACR1M is designed to switch mic-level signals. Two multi-turn trimmers are provided, one for audio input sensitivity, and one for delay control.
The RDL ST-ACR1 is an audio controlled relay and part of RDL's "Stick-On" series of equipment. It is designed for reliable operation and quick, easy installation. The ST-ACR1 is designed to switch line-level signals. Two multi-turn trimmers are provided, one for audio input sensitivity, and one for delay control.
The TX-MVX is the ideal choice in installations where either a manual switch or an open-collector must switch video signals. Video A is normally connected to Common. When the TRIG terminal is pulled to ground, Video B is connected to Common and Video A is disconnected.
The ST-ACR2 is an audio controlled relay and part of RDL's "Stick-On" series of equipment. It is designed for reliable operation and quick, easy installation. The ST-ACR2 is designed to switch line-level signals. Two multi-turn trimmers are provided, one for audio input sensitivity, and one for delay control.
SFP+ module CAT-X RJ45 Multi-Rate 10/5/2.5/1GbE
Aan elegant, high-quality metal-grade switch designed to subtly enhance conference tables. With a sleek, illuminated design, this button effortlessly toggles between room PC and laptop hosts, providing a seamless and sophisticated solution for BYOM scenarios.
Generalmente spedito entro 1 o 2 settimane
Twinax cable (DAC) for 10Gbps audio network, 1 m
An elegant, high-quality metal-grade switch designed to subtly enhance conference tables. With a sleek, illuminated design, this button effortlessly toggles between room PC and laptop hosts, providing a seamless and sophisticated solution for BYOM scenarios.
Generalmente spedito entro 1 o 2 settimane
HSL 8P Remote Auxiliary Front Panel
Wall mount accessory for SWR series
1 Year Elite Service REDPSU, excluding PSU modules
The ST-LCR1 Logic-Controlled Relay (Momentary) is a device that provides double-pole double-throw dry switching contacts and LED indicators for relay closure. Operation with this unit is momentary, making it well suited for installations where additional switching contacts are required. It will work with virtually any type of control signal.
4-Port Remote Auxiliary Front Panel
AC adapter for providing redundant power supply for SWP1, SWP2 and RSIO64Dc
Computer Access Module RJ45 Socket - USB, Display Port & Audio (out)
Computer Access Module RJ45 Socket - USB, mini Display Port & Audio (out)
Computer Access Module Dual Access RJ45 Sockets - USB & VGA
Computer Access Module Dual Access RJ45 Sockets - USB, VGA, Audio & RS232
The Host Button from INOGENI will activate the Toggle Rooms' Bring Your Own Meeting (BYOM) mode, which allows your laptop to host the meeting. In this mode, your laptop is the system that will be selected to interface with the main USB and HDMI peripherals.
Generalmente spedito entro 1 o 2 settimane
Network Annual Subscription for Software Update of 5 Devices
10GbE SFP Single Mode Fibre Module LC Connection
Bezel for RCX-CD1
KUMO +12VDC Power Supply, for Redundant Operation or Spare Part
White FLF mounting plate, assembled with 1x DisplayPort cable of 20 cm female / female.
Black FLF mounting plate, assembled with 1x DisplayPort cable of 20 cm female / female.
Adder Secure dual output RCU splitter
Computer Access Module - AdderView CatX5000IP RS232 Console. RJ45 Socket - RD9F
The Adder CATX-PS2A allows the connection of computers with PS2, VGA & Audio to connect to Adder CATx KVM switches.
Computer Access Module RJ45 Socket - USB, VGA & Audio (out)
3M SFP+ DIRECT ATTACH CABLE PASSIVE (
Power over Ethernet (PoE) support, Plug & Play functions, Maximum operating distance 100 m.
Generalmente spedito entro 2 o 4 settimane
HSL Matrix AFP Splitter
Adder SFP-CATX-RJ45 is an Active Gigabit Ethernet CATx SFP Transceiver for use with the AdderLink INFINITY Series. The SFP-CATX-RJ45 extends up to, but is not limited to, a 100 metre cable length. If you need to extend further, simply add a 1GbE network device to achieve an additional 100 metres.
SFP Single Mode Fibre Module LC Connection
PS?1205 is a desktop power supply with standard size DC output plug that provides 12V DC, 5A to any compatible device.
PS-4801 is a desktop power supply with a standard 2-pin terminal block connector that provides 48V DC / 1.36A to any compatible device.
Computer Access Module RJ45 Socket - Sun 8 Pin, VGA & Audio (out)
5V DC 6AMP POWER SUPPLY IEC INPUT 100-240V
10GbE SFP Multi Mode Fibre Module LC Connection
Computer Access Module RJ45 Socket - PS/2 & VGA
Computer Access Module RJ45 Socket - USB & VGA
12V DC 5AMP POWER SUPPLY IEC INPUT 100-240V
The black DB-RLC10K Remote Level Control is used with VCA modules where levels are to be controlled from a single remote location. The remote level control contains a long life 10kOhm potentiometer for setting the control voltage. Its front panel has 10 graphic increments which provide a visual indication of the level setting.
HSL 2U Rack Mount kit for 8P DH KVM
HSL 1U Rack Mount Kit For 8P SH KVM
1m Direct Attach SFP+ Cable
ADDER SFP-MM-LC is a Multi-Mode Fibre SFP Transceiver with LC connectors for use with the ADDERLink Infinity Series providing 4.25Gbps data rate up to 500 Metres away.
24V DC Poer Supply IEC 1A
5V DC 4AMP POWER SUPPLY IEC INPUT 100-240V
Rack Mounting Brackets