For professionals and enthusiasts alike.
OLED Electronic View Finder EVF-V70
1 pezzi in magazzino
This set contains the support components in the ALEXA 35 Production Sets (K0.0041726 or K0.0041725) that attach to the side of the camera's side. Includes: 1x K2.0033571; 1x K2.0033573; 1x K2.0034189; 1x K2.0023907; 1x K2.0034182.
1 pezzi in magazzino
EVF Tilt Adapter Swiss warranty. A unique tool to expand the usability of the FUJIFILM GFX 50S's removable electronic viewfinder, the EVF-TL1 EVF Tilt Adapter permits adjusting the angle at which the EVF is attached to the camera body.
1 pezzi in magazzino
The Z-Finder for Sony FX6 from Zacuto is an optical viewfinder that uses 2.5x magnification to turn the camera's LCD monitor into a clear, easy-to-focus viewfinder.
4 pezzi in magazzino
Camera Extension Box For Pxw-Fs7 & Fs7K
1 pezzi in magazzino
High quality viewfinder with built in proximity sensor, 4 element glass diopter, built in status information, and a digital focus chart.
1 pezzi in magazzino
Indoor power supply with ARRI camera power connector.Max. power ~ 280W, 24V, 11.7A. Compatible with all digital cameras from ARRI
1 pezzi in magazzino
1 pezzi in magazzino
Wireless module for camcorders
2 pezzi in magazzino
5Ghz/2.4Ghz Wireless Lan Adapter/Dongle For Pxw-X500/X400/X200/X180
1 pezzi in magazzino
WIFI Adaptor for PDW700 - PDWF800.
1 pezzi in magazzino
3.5 inches HD Widescreen
12 pezzi in magazzino
The Sh-L32Wbp Is A Hood That Can Be Attached To A Camcorders Lcd Monitor (3.2) And Provide Superb Light-Blocking Capability. Compatible With Hvr-Z7E, Hvr-S270E, Hvr-Z5E, Dsr-Pd175P.
1 pezzi in magazzino
Glasses model HoodEYE eyecup for Canon 7D, 1D & 1DS MARK III / IV
5 pezzi in magazzino
Hot-Clamp Snap-On Camera Handle Hot-Shoe
2 pezzi in magazzino
Permanent High Frame Rate License for BPU-4800 to allow 4K 200fps, 400fps Output
Includes: K2.0013648 1x DTS 1820-12G FCA Fibre CameraAdaptor 12G, K2.0014813 1x DTS 1820 FCA Lemo assembly, K2.0014814 1x DTS FCA Cable set for AMIRA, K2.0014659 1x DTS 1835B Dual Link 6G VideoInput Option, K2.0022568 1x DTS 1U Fibre Base Station FBS 4x3G & SL12G, K2.0022570 1x DTS 1U FBS Cable Set
Permanent High Frame Rate License for BPU-4800 to allow HD 400fps, 800fps Speed Output
Bright - high contrast optical viewfinder OVF-1 for ALEXA Studio and ALEXA XT Studio for through-the-lens viewing with low distortion - accurate color fidelity and no delay. Rotates to left and right of camera body and telescopes closer/farther from camera body. Automatically keeps an upright image with an optional manual image rotation.
Full slot, 1U high, 19 rack mount unit. Includes FBS, ERI and PSU with Lemo connector
Permanent High Frame Rate License For Bpu-4000 To Allow 4X,6X And 8X Speed Output
12G silhouette Sync pair
Generalmente spedito entro 2 o 3 settimane
Portable 4K capturing License for HDC-P50 and HDC-5500. Including HZC-PRV50 & HZC-PSF50 capability
Camera backend with V-mount attachment. DTS 1820 FCA Lemo Assembly K2.0014813 - is not included and needs to be ordered separatly
Portable High Frame Rate License for HDC-5500 and HDC-P50
The HZCE-DIR50 is an IP direct mode software license for the HDCE-TX30 IP Camera Extension Adaptor.
Permanent HD Cut Out License for BPU-4000, HDCU-4300, BPU-4500A Require CNA-1 for Cut Out Control
The MVF-2 is a low latency (?1 frame delay) electronic color viewfinder with a high contrast OLED viewfinder display (1920 x 1080) and 4" LCD flip-out monitor (800 x 400). The eyepiece is based on the ARRICAM design and offers high contrast, low distortion, an evenly illuminated viewing area for a clean image and a wide exit pupil for freedom of movement...
Permanent Quad Frame Rate License for HDC-5500, HDC-3500 and HDC-P50
MVF-1 Viewfinder for the ALEXA Mini including a 75cm Viewfinder Connection Cable
The viewfinder is included in the AMIRA K0 camera packages and does not need to be ordered separately when ordering a AMIRA K0 camera package
19" 1RU Encapsulator Interface with Analogue Audio Input via 8 x female XLR. A single channel of SD-SDI, HD-SDI or 3G-SDI and 8 x analgue audio is wrapped up in IP wrappers and is multicast over a standard 10G network via singlemode fibre on Neutrik OpticalCON DUO. Supports SMPTE 2022-6, SMPTE 2022-7 and SMPTE ST2110. Power via 12V input on XLR-4. Power...
Generalmente spedito entro 2 o 3 settimane
19" 1RU Decapsulator Interface with Analogue Audio Output via 8 x male XLR. A single channel of SD-SDI, HD-SDI or 3G-SDI with 8 x analogue audio signals is decapsulated from the IP network via singlemode fibre on Neutrik OpticalCON DUO. Supports SMPTE 2022-6, SMPTE 2022-7 and SMPTE ST2110. Power via 12V input on XLR-4. Power supply included.
Generalmente spedito entro 2 o 3 settimane
The 10 inch LCD monitor connects directly to the camera viewfinder interface or can be daisy chained with the CCP-1. It has controls for Contrast, Color, Backlight and Peaking, a physical On/Off switch for the frontside tally and two camera user buttons. The Monitor Yoke Support MYS-1 is designed to support the ARRI Viewfinder Monitor Multicam VMM-1.
Low latency (?1 frame delay) electronic color viewfinder with 1920 x 1080 high-contrast OLED display. Eyepiece is based on the ARRICAM design and offers high contrast, low distortion, an evenly illuminated viewing area for a clean image and a wide exit pupil for greater freedom of movement for the operator.
Full HD OLED & LCD VF for HDC/HSC/HDW/PDW/F65/PXW/PMW-500
Prime Support On-Demand Service for upgrading BVM-X300 monitor to version V2 firmware and installation of HDMI and 2nd SDI interface. The work takes place in Central Repair Centre. Parts, logistics and labour are included in the price.
Ruggedised, Stand Alone Portable Fibre Interface - Remote Camera End. Provides 4 x 3G-SDI inputs and 1 x GigE link, Genlock Return, 2 x RS232, 2 x RS422/485, 2 x GPI/O over 1 fibre. Power via 12V input on XLR-4. Power supply included.
Generalmente spedito entro 2 o 3 settimane
Ruggedised, Stand Alone Portable Fibre Interface - Base End. Provides 4 x 3G-SDI outputs and 1 x GigE link, Genlock Transmit, 2 x RS232, 2 x RS422/485, 2 x GPI/O over 1 fibre. Power via 12V input on XLR-4. Power supply included.
Generalmente spedito entro 2 o 3 settimane
Accessory set based on the Broadcast plate for ALEXA Mini and its counterpart, the quick release plate QRP-1. This set allows quick transition from handheld to tripod configuration.
Accessory set based on the Broadcast plate for ALEXA Mini and its counterpart, the quick release plate QRP-1. This set allows quick transition from handheld to tripod configuration.
Comprehensive set of mechanical accessories for ALEXA Mini allowing varied operating configurations such as handheld shots, lightweight gimbal stabilizers, stabilizer systems such as the MAXIMA and Trinity.
Comprehensive set of mechanical accessories for ALEXA Mini allowing varied operating configurations such as handheld shots, lightweight gimbal stabilizers, stabilizer systems such as the MAXIMA and Trinity.
Film-style, low latency (?1 frame delay) electronic color viewfinder with 1280 x 784 F-LCOS micro display (image: 1280 x 720, status bars: 1280 x 32 above and 1280 x 32 below image) and ARRI LED illumination, both temperature controlled. The high-end coated glass optics of the EVF-1 offer high contrast, low distortion and an evenly illuminated viewing area.
The 10 LCD monitor connects directly to the camera viewfinder interface or can be daisy chained with the CCP-1.
Empty Wireless Side cover for integration of 3rd party transmitters
Comprehensive set of 19mm Studio support accessories for ALEXA Mini LF allowing varied operating configurations such as handheld shots, lightweight gimbal stabilizers, stabilizer systems such as the MAXIMA and Trinity. The accessory set requires a battery solution for power distribution stage and on/board power.
Comprehensive set of 15mm Studio support accessories for ALEXA Mini LF allowing varied operating configurations such as handheld shots, lightweight gimbal stabilizers, stabilizer systems such as the MAXIMA and Trinity. The accessory set requires a battery solution for power distribution stage and on/board power.
Typical documentary style accessory bundle for the AMIRA camera. Includes: Wedge Plate Adapter; Bridge Plate Adapter; 3x CFast 2.0 Card 256GB; CFast 2.0 Card Reader; Microphone Holder Bracket; Universal Adapter Plate; Viewfinder Attachment Bracket; Center Camera Handle; Viewfinder Adapter; Quick Release Plate; AMIRA Camera Case
This set comprises the original classic mechanical accessories for ALEXA Mini, as well as a set of cables and a battery adapter plate.
This set comprises the original classic mechanical accessories for ALEXA Mini, as well as a set of cables and a battery adapter plate.
Ruggedised, Stand Alone Portable Hybrid Fibre Interface - Remote Camera End. Provides 4 x 3G-SDI inputs and 2 x RS232, 2 x RS422/485, 2 x GPI/O over 2 fibres. I/O via OpticalCON DUO as standard. Powered over hybrid cable from Base End. External power output to supply 30W @ 12V for external devices.
Generalmente spedito entro 2 o 3 settimane
Ruggedised, Stand Alone Portable Hybird Fibre Interface - Base End. Provides 4 x 3G-SDI outputs and 2 x RS232, 2 x RS422/485, 2 x GPI/O over 2 fibres. I/O via OpticalCON DUO as standard. Provides power over hybrid cable to Remote End. Power via 12V input on XLR-4. Power supply included.
Generalmente spedito entro 2 o 3 settimane
4K permanent license
Full HD OLED VF for HDC/HSC/HDW/F65/PDW/PXW/PMW-500
This expansion set offers owners of an ALEXA 35 Lightweight Set all components required to rig their camera as an ALEXA 35 Production Set (Studio 15mm). Includes: 1x K2.0024101; 1x K2.0034178; 1x K2.0023519; 1x K2.0033859; 1x K2.0033733; 1x K2.0034189; 1x K2.0034182; 1x K2.0023836; 1x K2.0015896.
This expansion set offers owners of an ALEXA 35 Lightweight Set all components required to rig their camera as an ALEXA 35 Production Set (Studio 19mm). Includes: 1x K2.0024101; 1x K2.0034178; 1x K2.0023519; 1x K2.0033859; 1x K2.0033733; 1x K2.0034189; 1x K2.0034182; 1x K2.0023549; 1x K2.0015896.
7.4'' Colour OLED Viewfinder for HDC/HSC/PDW/HDW
ST2110 software option for the AK-HC3900
Generalmente spedito entro 6 settimane
Permanent License - 1080/50p for HDC-3500/3100, HDC-P50
Quad 3G-SDI Encapsulator
Generalmente spedito entro 2 o 3 settimane
Quad 3G-SDI Decapsulator
Generalmente spedito entro 2 o 3 settimane
2x 3G-SDI Encapsulator + 2x 3G-SDI Decapsulator
Generalmente spedito entro 2 o 3 settimane
Adds the following features permanently to the AMIRA camera features: Framerates 100 - 200 fps - Recording formats ProRes 422 (HQ) - 4444 - 2K (2048 x 1152) recording - Log C - unlimited Look functions - Import Looks - Import custom 3D LUTs - ASC CDL in-camera grading - Dynamic Auto Tracking Whitebalance - WiFi Remote Control - Bluetooth Audio Monitoring...
295 mm viewfinder extension compatible with ALEXA Studio, ALEXA XT Studio, ALEXA SXT Studio, all ARRIFLEX 435 models and the ARRIFLEX 535B.
Upgrade kit consists of 4K output board for the AK-HCU250PSJ and a 4K Optical low pass filter for the AK-HC3900GSJ Camera head
Generalmente spedito entro 6 settimane
Dual 12G-SDI Encapsulator
Generalmente spedito entro 2 o 3 settimane
Dual 12G-SDI Decapsulator
Generalmente spedito entro 2 o 3 settimane
1x 12G-SDI Encapsulator + 1x 12G-SDI Decapsulator
Generalmente spedito entro 2 o 3 settimane
30 days High Frame Rate License for BPU-4800 to allow 4K 200fps, 400fps Output
Set of 19mm support accessories for ALEXA Mini LF allowing varied operating configurations such as handheld shots, lightweight gimbal stabilizers, stabilizer systems such as the MAXIMA and Trinity. The accessory set requires a battery solution for power distribution stage and on/board power.
Set of 15mm support accessories for ALEXA Mini LF allowing varied operating configurations such as handheld shots, lightweight gimbal stabilizers, stabilizer systems such as the MAXIMA and Trinity. The accessory set requires a battery solution for power distribution stage and on/board power.
2 16:9 widescreen B/W CRT viewfinder for the HDW Series, HDC1000R series and the New HSC300 HD/SD Cameras. ()Viewable area measured diagonally.
Ruggedised, Stand Alone Portable Fibre Interface - Remote Camera End. For use with singlemode fibre. Provides 4 x 3G-SDI inputs and 1 x GbE link over 2 fibres. I/O via 2 x ST connectors as standard. Power via 12V input on XLR-4. Power supply included.
Generalmente spedito entro 2 o 3 settimane
Panasonic AJ-HVF21KG is a 2inch B&W viewfinder compatible with the HPX-3100 camera.
Generalmente spedito entro 6 settimane
The Camera ControPanel CCP-1 is a small control panel that connects to the viewfinder port of ALEXA Mini or AMIRA. It can be used as a control device when no optical viewfinder is required and framing is done via an onboard monitor.
The Camera ControPanel CCP-1 is a small control panel that connects to the viewfinder port of ALEXA Mini or AMIRA. It can be used as a control device when no optical viewfinder is required and framing is done via an onboard monitor.
150 mm viewfinder extension compatible with OVF-1 (with ARRICAM Eyepiece Adapter AEA-1), ARRICAM Studio Viewfinder, ARRICAM Studio Universal Viewfinder, ARRICAM Lite Viewfinder 2 and ARRICAM Lite Universal Viewfinder.
200 mm viewfinder extension compatible with ALEXA Studio, ALEXA XT Studio, ALEXA SXT Studio, all ARRIFLEX 435 models and the ARRIFLEX 535B.
Typical documentary style accessory bundle for the AMIRA camera. Includes: 1x Wedge Plate Adapter WPA-1; 3x CFast 2.0 Card 128 GB; 1x CFast 2.0 Card Reader (USB-3); 1x Microphone Holder Bracket MHB-2; 1x Shoulder Belt Adapters, SBA-1; 1x Quick Release Plate, QRP-1; 1x AMIRA Camera Bag
Ruggedised Stand Alone Portable Decapasulator Interface. A single channel of SD-SDI, HD-SDI or 3G-SDI (dual O/P) is decapsulated from the IP network via multimode fibre on Neutrik OpticalCON DUO. Supports SMPTE 2022-6, SMPTE 2022-7 and SMPTE ST2110. Power via 12V input on XLR-4. Power supply included.
Generalmente spedito entro 2 o 3 settimane
Ruggedised Stand Alone Portable Encapsulator Interface. A single channel of SD-SDI, HD-SDI or 3G-SDI (with loop out) is wrapped up in IP wrappers and is multicast over a standard 10G network via multimode fibre on Neutrik OpticalCON DUO. Supports SMPTE 2022-6, SMPTE 2022-7 and SMPTE ST2110. Power via 12V input on XLR-4. Power supply included.
Generalmente spedito entro 2 o 3 settimane
Auto Tracking Software - Multi Camera Support - Extension (3 cameras) to AW-SF200G
Generalmente spedito entro 6 settimane
The CCP Live is based on the CCP-1 and has been expanded to include a HDMI downconverter, an HD SDI video out socket and a Tally out socket.
Ruggedised, Stand Alone Portable Fibre Interface - Base End. For use with singlemode fibre. Provides 4 x 3G-SDI outputs and 1 x GbE link over 2 fibres. I/O via 2 x ST connectors as standard. Power via 12V input on XLR-4. Power supply included.
Generalmente spedito entro 2 o 3 settimane
A module that attaches to the ALEXA Studio/ALEXA XT Studio Optical Universal Viewfinder OVF-1 and accepts ArriCAM style frameglow masks. Frameglow can be set to any color.
Replaces the 2x De-squeeze Module in the OVF-1 with a 1.3x squeeze ratio.
Colour LCD VF for HDVF compatible camera and camcorders
8x magnification wide angle eyepiece compatible with ALEXA Studio - ALEXA XT Studio - all ArriFLEX 435 models and the ArriFLEX 535B.
The Studio Upgrade Set adresses users of an existing set of ARRI accessories for ALEXA Mini who wish to complete their existing accessory set with the main elements from the Studio set for ALEXA Mini. Note that this upgrade set does not include a battery solution.
Quad-link 3G-SDI license for PXW-Z450 V2.0
Auto Tracking Software - Multi Camera Support - Extension (2 cameras) to AW-SF200G
Generalmente spedito entro 6 settimane
10x magnification super wide angle eyepiece compatible with ALEXA Studio, XT Studio, SXT Studio, all ARRIFLEX 435 models and the ARRIFLEX 535B.
3.5Inches Color Lcd Hd Viewfinder Pmw-320/350/400/500
The ARRIRAW License Key for ALEXA Mini enables in-camera recording in the 2.8K 16:9 MXF/ARRIRAW format. In combination with the ALEXA Mini 4:3 License Key the ALEXA ARRIRAW License Key will also enable MXF/ARRIRAW recording in Open Gate. Note: This License Key requires camera software update (SUP) 4.0 or greater. Please refer to the ALEXAMini manual and...
The AMIRA ARRIRAW License Key enables in-camera 16:9 2.8K (2880 x 1620) ARRIRAW recording at frame rates of up to 48fps.
The ALEXA Mini 4:3 License Key enables 3 new ProResrecording modes which access the full 4:3 sensor area and support the use of 2x anamorphic lenses. The new recording modes are: 4:3 2.8K; 2:39:1 2K Ana; HD Ana.
to EOS C-Serie, Return SDI Signal Input, Remote B (RS-422), Ethernet, Tally Signal Support, V-mount battery plate (with D-TAP), 12-pin Lens Terminal, DC OUT 12V-2A
Generalmente spedito in 2 settimane
Pro Set for Venice Extension Unit 1/2
Add the XDCA-FX9 Extension Unit to the back of your PXW-FX9 camera to add an ENG-style shoulder mount and additional I/O and power to your camera. The unit features a 4-pin XLR DC power input and D-Tap and 4-pin Hirose DC power outputs to power accessories and other equipment.
The most affordable accessory bundle for the AMIRA camera. Includes: K2.75000.0 1x Wedge Plate Adapter WPA-1; K2.0003623 3x CFast 2.0 Card 128 GB; K2.0001242 1x CFast 2.0 Card Reader (USB-3); K2.75005.0 1x Microphone Holder Bracket MHB-2; K2.0001223 1x Shoulder Belt Adapters, SBA-1; K2.0000399 1x Quick Release Plate, QRP-1; K2.0001240 1x AMIRA Camera Bag
The HZCE-CNFG50 is a software license supporting the Ember+ protocol for the HDCE-TX30 IP Camera Extension Adapter and HDCE-RX30 IP CCU Extension Adapter.
The Audio Extension Module AEM-1 adds a high-quality audio interface and extra accessory power outputs to the ALEXA 35. Featuring two ultra-low noise microphone preamplifier channels, the AEM-1 mounts directly to the rear of the camera as an integrated electronic module. Selectable features include MIC/LINE input, 48V Phantom power, phase reversal,...
30 days High Frame Rate License for BPU-4800 to allow HD 400fps, 800fps Speed Output
7 days High Frame Rate License for BPU-4800 to allow 4K 200fps, 400fps Output
KineEVF2 Pack
Permanent License - 1080/25p & 24p for HDC3500/3100/3170, HDC-P50
Remote Operation Unit OU-700
Generalmente spedito in 2 settimane
KineEVF2 Full-HD OLED Viewfinder
CCP-Live Camera Control Panel Live Upgrade Set
The Power Distribution Module PDM-1 is an optional, low-profile accessory that attaches to the back of the ALEXA 35 and adds seven power outputs (4x 24 V, 2x 12 V, 1x 12 V Twist D-Tap). Once attached to the camera, the PDM-1 is internally powered and there are no extra cables or brackets necessary, making it an elegant integrated accessory.
Auto-Tracking Software - Multi-Camera Support - Basic Version: Simultaneous automatic tracking and central control of multiple cameras are possible. A server and simplified processes enable efficient lectures in several classrooms
Generalmente spedito entro 6 settimane
This set contains the support components in the ALEXA 35 Production Set 15mm (K0.0041725) that attach to the base of the camera. The included CBP-6 accepts 15 mm LWS and 15 mm studio rods. Includes: 1x K2.0023836; 1x K2.0015896.
This set contains the support components in the ALEXA 35 Production Set 19mm (K0.0041726) that attach to the base of the camera. The included CBP-5 accepts 15 mm LWS and 19 mm studio rods. Includes: 1x K2.0023549; 1x K2.0015896.
Titanium PL LDS Lens Mount with L-Bus Connector, Compatible with the ALEXA Mini Video Camera
This set contains the support components in the ALEXA 35 Production Sets (K0.0041726 or K0.0041725) that attach to the top of the camera, including the Viewfinder Mounting Bracket VMB-5. Includes: 1x K2.0034178; 1x K2.0024062; 1x K2.0023519; 1x K2.0033733; 1x K2.0033859.
Shoulder Style Grip Unit SG-1
Generalmente spedito in 2 settimane
Includes: K2.72021.0 1x ALEXA Ethernet/RJ-45 Cable (3.00m/9.8ft) KC 153-S; K2.72013.0 1x Viewfinder Cable Medium (0.65m/2.1ft)KC 151-S; K2.72083.0 1x Shoulder Pad (SP-4); K2.72031.0 1x ALEXA 12V Accessory Cable KC 154-SP-S; K2.72015.0 1x Handle Extension Block (HEB-2); K2.72017.0 1x Leveling Block (LB-1); K2.74000.0 1x Viewfinder Extension Bracket VEB-3;...
The Smart APU benefits fast-paced filming by keeping camera and accessories powered during battery changes.
The Smart APU benefits fast-paced filming by keeping camera and accessories powered during battery changes.
The HZCE-SNMP50 software license for the HDCE-TX30 IP Camera Extension Adapter and HDCE-RX30 IP CCU Extension Adapter allows access to the IP HDCE SNMP Agent from the SNMP management system.
Add the high-resolution URSA Cine EVF to your Blackmagic Design URSA Cine 12K or PYXIS 6K camera for crisp, clear images, making shooting easy in any environment. The EVF features a 1920 x 1080 color OLED display supporting up to 60 fps to view your image with status information, frame guides, and even a built-in focus chart to help you achieve the...
Basic Set for Venice Extension Unit 1/2
30 Days High Frame Rate License For Bpu-4000 To Allow 4X,6X And 8X Speed Output
Visual Presets for Multiple PTZ Cameras Software Key
Generalmente spedito entro 6 settimane
A heated eyecup compatible with the AMIRA MVF-1 (new eyepice) and the ALEXA EVF-1 eyepiece. Designed to reduce fogging or freezing in very humid and/or cold environments. Not compatible with AMIRA MVF-1 (old eyepiece) or film camera eyepieces. Includes heated eyecup cable KC-42 (K2.47771.0).
The Blackmagic URSA Viewfinder is designed specifically for use with the URSA and URSA mini digital film cameras.
Silhouette Ruggedised, Stand Alone Portable Fibre Interface - Remote Camera End. For use with SMPTE Hybrid cable. Provides local 12v power (75W) from SMPTE Hybrid cable. Optical connection is from Lemo L3K93C-SKT to 2x ST connectors.
Generalmente spedito entro 2 o 3 settimane
The Monitor Yoke Support MYS-1 is designed to support the ARRI Viewfinder Monitor Multicam VMM-1. It offers adjustments in four axis, including one assisted with counter balance. The MYS-1 can be mounted to the top of the AMIRA handle or other ARRI Cameras.
24V Upgrade for the TRINITY. Existing units can be upgraded through the the ARRI Service. For a new TRINITY order the upgrade must be ordered while initial order.
he EVF101 Electronic Viewfinder from Z CAM offers a crisp viewing option for your Z CAM or other camera lacking an integrated viewfinder. This viewfinder has an HDMI input that supports up to UHD 4K30 video and an SDI input supporting up to 1080p60 video.
Panasonics new software assists automatic tracking of a person shot by a Panasonic Remote Camera. With the ability to track a single person, this software is well suited to such environments as education and video conferencing.
Generalmente spedito entro 6 settimane
The audio slot allows a direct integration for wireless audio receivers. It includes a buffer battery for up to 30 sec buffering for changing batteries without powering down the camera.
The audio slot allows a direct integration for wireless audio receivers. It includes a buffer battery for up to 30 sec buffering for changing batteries without powering down the camera.
7 days High Frame Rate License for BPU-4800 to allow HD 400fps, 800fps Speed Output
The General Purpose IO Box GPB-1 is a break-out box that works with ALEXA Mini and AMIRA, allowing users to build custom button interfaces or electronic controls. The box provides protected input channels that act like user buttons on the camera and can be configured flexibly.
Largely extended range for positioning the eye in avertical and horizontal direction. Includes an improved position for the approach sensor with increased compatibility for "left eye operators" and also for using individual eyecushions. Only for MVF-1 with serail number 2150 and below, MVF-1 with serial number 2151 and higher do include this upgrade already.
A robust heated eyecup with 2 power settings that fits all ARRICAM, ARRIFLEX and ALEXA Studio eyepieces. Not compatible with ALEXA Electronic Viewfinder EVF-1 or AMIRA Viewfinder MVF-1 eyepieces. Cable has to be ordered separately.
30 Day License For Hd Cut Out Software For Bpu-4000. Require Cna-1 For Cut Out Control
The VMB-5 is a medium length viewfinder mounting bracket with fast and comfortable adjustment. The VMB-5 attaches to the Square Accessory Sleeve SAS-1. The SAS-1 attaches to any two M4 attachment points that are 20 mm apart. The ARRI viewfinders EVF-1, EVF-2, MVF-1 or MVF-2 can be attached to the dovetail on the VMB-5.
Sturdy telescoping bracket that attaches the Electronic Viewfinder EVF-1 to all ALEXA cameras (Electronic Viewfinder Adapter EVA-1 additionally required for ALEXA Studio and ALEXA XT Studio). Uses standard 15 mm lightweight rods (at the proper distance from each other and from the optical center) for forward/backwards movement.
Compatible with the Sigma fp series of mirrorless cameras, the EVF-11 Electronic Viewfinder is an auxiliary viewfinder offering bright, high-magnification eye-level monitoring.
Generalmente spedito entro 6 o 8 settimane
The Viewfinder Mounting Bracket VMB-5 offers a longer reach than traditional viewfinder brackets and is the most flexible and comfortable method to attach a viewfinder to a camera. Positioning the viewfinder in a 360° arc is done by loosening a single thumb screw and freely repositioning the viewfinder, which will remain in place thanks to double...
30 days Quad Frame Rate License for HDC-5500, HDC-3500 and HDC-P50
7 Days High Frame Rate License For Bpu-4000 To Allow 4X,6X And 8X Speed Output
In order to allow higher input levels with the line audio input on AMIRA, a new extended audio board is available for upgrade. This new audio board allows +24dBu input level in addition to the +8dBu with the current board. It also allows the headphone out to be looped through a connected mixer. The new audio board is available at the ARRI service stations...
Attaches MVF-1 viewfinder to ALEXA Mini via 15mm LWS rods and viewfinder mount. Requires MAP-2 for 15mm rod support.
DXA-ALEXA Preamplifier for the Arri Alexa Mini camera. Two XLR Inputs,gain controls, phantom power, level indicators, headphone monitoring
Add two full XLR inputs and enjoy more ergonomic handling of your FX3 or FX30 with the Sony XLR-H1 XLR Handle Unit.
ETH-B4 Link
Spedito in 4 settimane
A mechanical cover for the ALEXA Studio or ALEXA XT Studio viewfinder interface that includes mounting points for the ALEXA Viewfinder Mounting Bracket VMB-1 - VMB-2 or VMB-3 and an EVF connector for an ALEXA viewfinder cable.
Network License will provide additional network related features. Live streaming capability with Non-QoS regular MPEG TS will become available on top of Sony QoS streaming to XDCAM air.
Ready to use directors viewfinder kit for any camera with an E mount.
30 Days License 25P & 24P Option For HDC-2400/HDC-1700
30 Days License 1080/50P Option For HDC-2400/HDC-1700
Ground glass for ALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio in 16:9 mode with no markings. 1200 grit surface.
Ground glass for ALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio in 16:9 mode with no markings. 800 grit surface.
Ground glass forALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio in 4:3 mode with no markings. 1200 grit surface.
Ground glass for ALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio in 4:3 mode with spherical lenses. Includes rectangles for 1.78:1 and 2.39:1 (flat) and stubs for 1.33:1 inside of 1.78:1. 1200 grit surface
Ground glass for ALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio in 16:9 mode with spherical lenses. Includes rectangles for 1.78:1 and 2.39:1 (flat) and stubs for 1.33:1 inside of 1.78:1. 1200 grit surface
Ground glass for ALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio in 4:3 mode with no markings. 800 grit surface.
With this adapter the ALEXA Studio Optical Viewfinder OVF-1 can accept the ArriCAM Studio Eyepiece (K2.54003.0) - ArriCAM Studio Medium Extension (K2.54005.0) - ArriCAM Studio Zoom Extension (K2.54004.0) and ArriCAM Studio Anamorphic Extension (K2.54018.0 - which is recommended - sadly but ironically - only for spherical viewing with ALEXA Studio).
Fujifilm G Mount (GFX) to ARRI LPL Mount Adapter
Generalmente spedito entro 8 o 12 settimane
EDB-2 is a signal distribution box especially designed for the ALEXA Mini EXT Sync feature. The box connects to an ALEXA Mini EXT connector and provides 3 EXT outputs to connect ALEXA Mini cameras or additional EDB-2 boxes
AMIRA Onboard Microphone set: TinyMike set is a small and light solution from Ambient including microphone, suspension, foam windshield, XLR cable and windgag. It suits perfectly as onboard microphone. The AMIRA microphone holder MHB-2 (K2.75005.0), providing the perfect connection to the camera, needs to be ordered seperately.
Unlocks remote control of frame rate, shutter angle, ISO, white balance, playback and camera user buttons. Supported features depend on camera model and camera settings.
DXA-RED Preamplifier for RED DSMC2 cameras
Sturdy telescoping bracket that positions the Electronic Viewfinder EVF-1 or MVF-1 at the back of the camera (i.e. for use with geared heads). Includes swing-out arm to rest viewfinder on camera during set up changes. Requires medium (recommended) or long viewfinder cable.
30 days License - 1080/50p for HDC-3500/3100, HDC-P50
MPEG HD upgrade for the PXW-X70
The Canon EVF-V50 OLED Viewfinder for C500 Mark II is a tilting EVF that you can mount on your Canon C500 Mark II camera.
Data di consegna sconosciuta
Software license and control cables that enable real-time configuration of ALEXA Mini, ALEXA Mini LF, and AMIRA cameras.
Generalmente spedito entro 4 o 9 settimane
Software license and control cables that enable real-time configuration of the SONY VENICE camera.
Generalmente spedito entro 4 o 9 settimane
Software license and control cables that enable real-time configuration of RED RCP2 cameras (KOMODO, DSMC3).
Generalmente spedito entro 4 o 9 settimane
Software license and control cables that enable real-time configuration of RED DSMC2 cameras.
Generalmente spedito entro 4 o 9 settimane
Software license and control cables that enable real-time configuration of RED DSMC2 cameras.
Generalmente spedito entro 4 o 9 settimane
LCD View Finder LVF-11 (fp)
Generalmente spedito entro 6 o 8 settimane
SMPTE 311 Lemo connector for DTS 1820-12G FCA Fibre Camera Adaptor 12G, K2.0013648
The Z CAM eND Module for E2 Flagship Series replaces the removable clear-glass module in the camera's PL or EF lens mount and provides an electronically variable ND. The eND module has a minimum setting of 1.7 stops and can provide up to 6.7 stops of exposure adjustment in 1/3 of a stop increments without degrading your image.
This upgrade replaces the old radio of ALEXA cameras with the new ARRI EMIP300 white radio. The EMIP300 radio allows the highest possible radio output power within the legal limits determined by the local region. All new cameras and new ECS equipment will be delivered with the EMIP300 radio
Pod to control intercom functions, XLR version
Super compact, super tough and easily mountable Dual XLR Adapter with low-noise preamplifiers for cinema cameras. Simple, no fuss layout and features gives you everything you need to easily record cinema quality audio to your camera.
Used on current ARRI cameras, this proven viewfinder bracket offers the best adjustment range and sturdiness for this type of viewfinder from the Sony FS7II/ FX9.
7 days HD Cut Out License for BPU-4000, HDCU-4300, BPU-4500A Require CNA-1 for Cut Out Control
B-Box (RED Komodo)
Generalmente spedito entro 8 o 12 settimane
The VFA-4 optimizes handheld operating with on-board monitors by profiting from the adjustability of classic ARRI viewfinder mounts such as ARRI VMB-3, MVB-1 or VMB-5. The VFA-4 is well suited for operating with suspension harness and suits particularly well the ARRI Camera Control Monitor CCM-1.
30days License - 2x Slowmotion (1080/100i) for HDC-3500, HDC-P50, HDC-5500
The Low Mode Support LMS-4 is a fully featured top plate for the ALEXA 35. A new quick release mechanism allows the CCH-5 top handle to be easily removed, without tools, while retaining superior rigidity while mounted. Dual rod clamps for optically centered 15 mm rods allow for top mounted motors or traditional viewfinder mounting brackets (using the MVB-1).
7 days Quad Frame Rate License for HDC-5500, HDC-3500 and HDC-P50
NDI|HX Upgrade for PTZOptics cameras
Sigma VF-31 External Viewfinder for DP1 Quattro
Generalmente spedito entro 6 o 8 settimane
Sigma VF-41 External Viewfinder for DP2 Quattro
Generalmente spedito entro 6 o 8 settimane
Sigma VF-51 External Viewfinder for DP0 Quattro
Generalmente spedito entro 6 o 8 settimane
BMPCC 4K/6K Flip Screen Modification
Tempi di consegna da 4 a 6 settimaneGeneralmente spedito 6 settimane
The Panasonic AJ-MH800G is a microphone holder for the AJ-HDX900 camcorder.
Generalmente spedito entro 6 settimane
Weighting in at less than half traditional top plates, The MAP-4 for ALEXA Mini LF is a minimal adapter to the range of lightweight accessories for ALEXA 35, such as the Lightweight Camera Handle LCH-1.
Unlocks remote control of frame rate, shutter angle, ISO, white balance, ND filters, playback and camera user buttons. Supported features depend on camera model and camera settings.
Connects the Electronic Viewfinder EVF-1 to the EVF socket on ALEXA and ALEXA XT cameras. Longest possible length for use with specialty rigs.
Pass Through Top Plate (RED DSMC2)
Generalmente spedito entro 8 o 12 settimane
The unit features two 3-pin XLR audio inputs, a microphone holder, a start/stop record button, a zoom rocker, and a built-in LED light.
Generalmente spedito entro 6 settimane
Connects the Electronic Viewfinder EVF-1 to the EVF socket on ALEXA and ALEXA XT cameras. Ideal length for use of EVF-1 on camera right side or when using Viewfinder Extension Bracket VEB-1 or VEB-3.
Connects the Electronic Viewfinder EVF-1 to the EVF socket on ALEXA and ALEXA XT cameras. Ideal length for use of EVF-1 on camera left side in handheld mode.
7 Days License 1080/50P Option For HDC-2400/HDC-1700
7 Days License 25P & 24P Option For HDC-2400/HDC-1700
Upgrade software key to enable WIRELESS TC LINK options on PXW-Z90 and HXR-NX80
This viewfinder bracket is designed for the Canon EOS C200 viewfinder kit
FF Heavy OLPF (OLPF-FF3)
Upgrade for Lumens Cameras VC-A50PN (Coupon code)
NDI|HX Upgrade for AXIS Cameras
Compatible Cameras: TR311HWV2, TR313V2, TR333V2, PTC330UV2, PTC320UV2, PTC310UV2, PTC310HWV2.
NDI|HX Upgrade for HuddleCamHD Cameras. Compatible Cameras: HC20X-SIMPLTRACK2 | HC12X-HUDDLEVIEW.
Eligible SONY camera models: BRC-X400 | SRG-X400 | SRG-X120 | BRC-X401* | SRG-X402* | SRG-201M2* | SRG-HD1M2* | SRG-XP1 | SRG-XB25 *: China only model - Coupon code.
Upgrade for Marshall Cameras. Compatible Cameras: CV620-IP and CV620-IPW. (Coupon code)
Upgrade your Panasonic camera with NewTek NDI HX. Compatible Cameras: AW-UE70 | AW-HE40 | AW-HE70 | AW-HE65 | AW-HE38 | AW-HE58 | AW-HE35 | AW-HE48 | AW-HE130 | AW-UE150 | AG-CX10 | AG-CX98 | AG-CX350 | AW-UE65/UE63 | AW-UE155 | AJ-UPX360 | AJ-CX4000 | AJ-UPX900 | AW-HE42 | AW-HE75 | AW-HE68 | HC-X2500 - Coupon code.
LTE stick/ CBK-WA02 Dual Link adapter
The ARRI Look Library is a comprehensive set of predefined looks for ARRI cameras with advanced look management. It provides a set of high quality looks and offers a basic repertoire of color responses like film stocks and filters did for film cameras
An attachment that allows the AMIRA viewfinder to be mounted to two 15 mm lightweight rods above the lens - as can be found on the Universal Adapter Plate UAP-2 (K2.0001221). This bracket is already included in the Universal Adapter Plate UAP-2 Set (K0.0001280).
Viewfinder bracket universal
This viewfinder bracket is designed for the Arri viewfinders
The DR-5 Screw-In Right Angle Viewfinder from Nikon provides an upright, unreversed image for right-angle viewing, very convenient for waist-level or low-angle photography.
The Nikon DR-6 Rectangular Right Angle Viewfinder provides an upright, unreversed image for right-angle viewing, which is very convenient for waist-level or low-angle photography.
Provides REC, BAT and FULL warning indicators in the bottom of the optical viewfinder frame when a blank ground glass is used on ALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio
The thin and lightweight Balance Utility Dovetail BUD-1 attaches to the underside of the ALEXA 35's, where its dovetail allows the camera to be securely and quickly attached to all other ALEXA 35 bottom accessories. The dovetail also allows significant balancing adjustment of the camera on all other shoulder pad, bridgeplate and SAM plates.
Microphone Adapter MA-400 for C300MKII
Generalmente spedito in 2 settimane
7 days License - 1080/50p for HDC-3500/3100, HDC-P50
View Finder VF21 (DP2/S/X/Merrill)
Generalmente spedito entro 6 o 8 settimane
View Finder VF11 (DP1/S/X/Merrill)
Generalmente spedito entro 6 o 8 settimane
CA-A10 power supply for EOS C300 Mark II
Generalmente spedito in 2 settimane
Allows Microphone Direction To Be Adjusted. For Attaching The Ecm-647/678 Or The C-74 Condensor Microphone To Cameras And Camcorders.
Wooden Camera - A-Box (Alexa Mini)
Generalmente spedito entro 8 o 12 settimane
A-Box (RED DSMC2, KOMODO)
Generalmente spedito entro 8 o 12 settimane
A-Box (Sony Venice) adapts the single 5 pin XLR on the side of the Venice camera body, to two standard 3 pin XLRs (female)
Generalmente spedito entro 8 o 12 settimane
A-Box (Alexa Mini LF)
Generalmente spedito entro 8 o 12 settimane
Viewfinder bracket with rosette
Separate top handgrip including top 15mm rails (Fits directly on Blackmagic Cinema Camera)
V-Lok Sony PMW-300 Camera Adaptor - 1x Power-con
Generalmente spedito entro 2 o 3 settimane
To mount the Smart APU power Supply from top-mounted 15mm LWS rods, with a slight angle.
This viewfinder bracket kit is designed for use with any viewfinder with a 1/4" thread on the bottom side
This viewfinder bracket is designed for the Canon EOS C200 viewfinder
The viewfinder bracket for the Canon EVF viewfinders replaces the original bracket from Canon mounted on their viewfinders. The ARRI PCA viewfinder bracket is an improved bracket to fit with our viewfinder mounting bracket MVB-1
30 days License - 1080/25p & 24p for HDC3500/3100/3170, HDC-P50
7 days License - 2x Slowmotion (1080/100i) for HDC-3500, HDC-P50, HDC-5500
2pin Lemo to 8pin Lemo power cable for Smart APU power Supply
2pin Lemo to 8pin Lemo power cable for Smart APU power supply
2pin Lemo to 8pin Lemo power cable for Smart APU power supply
This Advanced I/O Module from Tilta expands the connectivity of your RED V-RAPTOR thanks to its various power, control, and video ports. An integrated extension cable connects to the camera body to increase functionality for run/stop and timecode via a 3-pin Fischer port and 5-pin port. Genlock video is available via a BNC connector.
Tempi di consegna da 4 a 6 settimaneGeneralmente spedito 6 settimane
Two-channel active adapter with powerful low-noise preamplifiers, level controls, headphone monitoring, phantom and plug-in power, cheese plate plus a VU-meter.
FF Light OLPF (OLPF-FF1)
Wooden Camera - A-Box (5pin XLR, ARRI Alexa, RED Ranger)
Generalmente spedito entro 8 o 12 settimane
Wooden Camera - A-Box (Canon C70, RED ONE)
Generalmente spedito entro 8 o 12 settimane
This viewfinder bracket is designed for the Sony PXW-FS7 / FS7 II and is meant to replace the original viewfinder bracket of this camera
Coiled D-Tap Regulation Cable for Kandao Obsidian R/S (6'-8', Regulated)
Mounting bracket for EVF (V)
This viewfinder bracket kit is designed for viewfinders that are equiped with a rosette with 1/4" threaded hole
This viewfinder bracket is designed for the Arri viewfinders
To mount the Smart APU power supply to MoVI stabilizer frames
power supply
Generalmente spedito in 2 settimane
Built-in LiPo battery that will power the unit for up to 10 hours, Micro USB power jack for charging and external power, Removable Cheese Plate to easily mount accessories, Optional BRM-2 Baseplate Accessory to add rod support
Audio supply convertor for BMCC/BMPC (15mm)
Tempi di consegna da 4 a 6 settimaneGeneralmente spedito 6 settimane
2pin Lemo to 4pin XLR 12V external power cable for Smart APU power supply
Viewfinder bracket for Sony PXW-FS7
BMPCC 4K/6K Display Modification Service
Tempi di consegna da 4 a 6 settimaneGeneralmente spedito 6 settimane
This D-Tap Braided Flexible Power Cable to RED DSMC1/DSMC2 from Wooden Camera is a special flexible version of the D-Tap to right-angle power connector for your camera.
Generalmente spedito entro 8 o 12 settimane
Wooden Camera - 3pin XLR to Alexa Mini / Mini LF (Straight, 120")
Generalmente spedito entro 8 o 12 settimane
Wooden Camera - 4pin XLR to Alexa Mini / Mini LF (Straight, 120")
Generalmente spedito entro 8 o 12 settimane
The Sony ECM-XYST1M Stereo Microphone is compatible with Handycam camcorders, Cyber-Shot cameras, Alpha/NEX cameras, and any other camera that has a Sony Multi Interface Shoe.
To mount the Smart APU power supply to DJI Ronin stabilizer Frames.
Short adapter cable that connects to the EXT connector of the ALEXA Mini and provides a 3-pin RS connector.
Right Side Plate (RED DSMC2)
Generalmente spedito entro 8 o 12 settimane
Alexa Mini Audio LEMO Compatible to 5pin Female XLR (18").
Generalmente spedito entro 8 o 12 settimane
Network Adapter Kit With A Network Module Extension Adapter And Usb To Rj45 Adapter
Throught the Lens Kit for 7" Monitor. A "through the lens" monitor preview solution. Can be used with web conferencing software such as Zoom for remote interviews, allows you to see your guest while looking directly into the centre of the camera lens or for online presentations / webinars.
Generalmente spedito in 3 o 4 settimane
two Mono Mini-Jack + 1 Stero Mini Jack Input, XLR Output, Mini-Jack Output, level indicators, low noise preamplifiers
Safety NATO Arm (RED DSMC2)
Generalmente spedito entro 8 o 12 settimane
Power supply
Generalmente spedito in 2 settimane
Optional plug-in license for the recording function of the P2 Viewer Plus
Generalmente spedito entro 6 settimane
A cover to protect the ALEXA Studio or ALEXA XT Studio viewfinder port when neither the Optical Universal Viewfinder OVF-1 (K2.72048.0) nor the Electronic Viewfinder Adapter EVA-1 (K2.72063.0) are attached.
DXA-MICRO PRO Two channel active adapter. Level controls, headphone monitoring, phantom power and plug-in power, one balanced XLR input, two mono and one stereo mini-jack inputs.
Camera URSA SVF - Sunhood
The Z Cam Timecode Adapter for Z Cam E2 with DB9 to CTRL Port Cable allows you to connect a timecode generator sending an LTC signal via a BNC connector into your Z Cam classic E2 as well as E2 Flagship cameras.
The RAB-1 Adapter for Smart APU connects the Smart APU hot-swap solution to the RAB-1 Clamp.
7 days License - 1080/25p & 24p for HDC3500/3100/3170, HDC-P50
5-Pin XLR to 6-Pin Lemo Cable to Connect the DXA-ALEXA / CINE to Arri Alexa Mini LF Camera:45cm
XLR5F to Right-Angle LEMO Adapter Cable (17.7")
Kine D-TAP Power Cord (Straight Cord, 1.5M)
Magnify your viewfinder's center image area by 2x with Nikon DG-2 Eyepiece Magnifier, which flips up to quickly view the entire image area when needed.
Quickly and easily install an external LCD monitor (not included) to your Wave camera with the Adjustable Quick Release Monitor Mount from Freefly.
The Square Accessory Sleeve SAS-1 is required to mount the Viewfinder Mounting Bracket VMB-5 to your camera and has been designed with a rectangular rod to prevent the viewfinder falling when loosening the adjustment clamp.
The SAS-2 is a modernization of the original SAS-1 that can be attached pointing rearward at the front of the handle CCH-5, optimizing space with short lenses set-ups.
Kine D-TAP Power Cord (Coiled Cord-Soft Turn, 0.8M)
The Balance Harness Adapter BHA-1 allows the secure attachment and rapid balancing of the ALEXA 35 when using various camera suspension harnesses. The BHA-1 slips over the handle of the Lightweight Camera Handle LCH-1 and can be slid forwards and backwards with a simple thumbscrew. It features a 3/8-16 threaded hole for connection and can also be used to...
Content Browser Volume Licence
Viewfinder Adapter VFA-3
A-Box Conversion Kit (Weapon/Scarlet-W/Raven) includes all the necessary components to convert any A-Box including the original A-Box Conversion Kit (RED DSMC2)
Generalmente spedito entro 8 o 12 settimane
SSD Case for BMPCC 4K/6K Display Modification
Tempi di consegna da 4 a 6 settimaneGeneralmente spedito 6 settimane
Single sided 15 mm NATO rail long; length: 170 mm
The Sony AC-PW10AM is an AC travel adapter. Compatible with all Sony DSLR cameras and can be used worldwide. Lightweight and compact.
The Sony GP-VPT1 Shooting Grip with Mini Tripod provides one-handed operation of your multi-terminal equipped Sony camcorder or camera. It can also fold out into a mini tripod for hands-free use. The GP-VPT1 features a pan handle with wired remote control, adjustable grip angle, and zoom, photo, and start/stop record buttons. A hand strap, cable clamper,...
This viewfinder bracket is designed for the Sony PXW-FS7 / FS7 II and is meant to replace the original viewfinder bracket of this camera
Separate 15 mm viewfinder adapter for top handgrip
Viewfinder extender
two mono 3.5 mm jacks, one stereo 3.5 mm jack,one stereo 3.5 mm jack (includes 3.5 mm TRS output cable), level Controls, output selector
D-Tap to 2-Pin LEMO Power Cable for DXA-ALEXA / DXA-CINE
Wooden Camera - Mini 4pin XLR Female to Full 4pin XLR Male
Generalmente spedito entro 8 o 12 settimane
Mini 3pin XLR Male to Full 3pin XLR Female (20")
Generalmente spedito entro 8 o 12 settimane
The CA-PS700 Power Adapter is the standard charger and power source for the compatible Elura camera. It will charge one battery at a time. It connects directly to the camcorder's body and the battery can be charged while the CA-PS700 is attached. This means you don't need to take a charger with you on a trip.
Generalmente spedito in 2 settimane
AC Adaptor for Select Sony Cameras
BT-MINI XLR5F to Right-Angle 3.5mm TRS Adapter Cable (17.7")
?h? N?k?n ? ???? F??u??ng ??r??n ?? th? ?t?nd?rd f??u??ng ??r??n ?u??l??d f?r ?ll N?k?n ?F ?LR ??m?r??. ?h?? ??rt??ul?r ??r??n ?? t? f?t th? N?k?n D3 D?LR. ?h? ???? ? F??u??ng ??r??n ?? ?n ?nt?r?h?ng??bl? f??u??ng ??r??n th?t ?ff?r? un?b?tru?t?d v??w?ng ?nd ???? f??u??ng ?v?r th? ?nt?r? m?tt? ?urf???. ?h?? ??r??n ?? ?d??l f?r g?n?r?l ?h?t?gr??h?.
M/F6 Focusing Screen
U/F6 Focusing Screen
E/F6 Focusing Screen
J/F6 Focusing Screen
L/F6 Focusing Screen
AC Adapter for Sony XDCAM PXW-FS5, PXW-FS5K, PXW-FS7, PXW-FS7K
Sony AC-L200 AC-Adapter P-Series
An adapter with an Arri viewfinder dovetail on one side and one 3/8 and one 1/4 mounting point on the other side. This adapter can be used to mount the AMIRA or ALEXA viewfinders to Arri Universal Mounting Arms (UMA) or Noga arms.
To connect an on-board camera stereo microphone to the stereo XLR input A.
To connect an on-board camera mono microphone to the stereo XLR input A (left channel)
To connect an on-board camera mono microphone to the mono XLR inputs B or C.
The ZMU-4 ARRI Rosette can be mounted as a second rosette on the ZMU-4. This second rosette is already premounted on the ZMU-4 when ordering KK.0043770 ZMU-4 Basic Set.
Shotgun Microphone Holder (Cold Shoe) BSM2352
Generalmente spedito entro 4 o 5 settimane
The Nikon DK-17A Anti-Fog Eyepiece is a replacement eyepiece for select Nikon SLR and DSLR cameras. This eyepiece includes a fog-resistant optical element and provides a comfortable surface for the area around your eye while framing a subject through the camera's viewfinder.
Remote control for TC Bar S/M, infrared, 2 AAA batteries
The Nikon DK-17 Eyepiece is a replacement eyepiece for select Nikon SLR and DSLR cameras. This eyepiece provides a comfortable surface for the area around your eye while framing a subject through the camera's viewfinder.
The Nikon DK-17F Fluorine-Coated Finder Eyepiece is a replacement eyepiece for select Nikon DSLR cameras. This eyepiece features fluorine coated glass and soft durable rubber and is safe for eyeglass users.
The Nikon DK-27 Eyepiece Adapter for D5 DSLR is a replacement eyepiece for the Nikon D5 DSLR camera. The eyepiece provides a comfortable frame with which to utilize the camera's viewfinder.
Dedicated to the Nikon Z9 and Z8 mirrorless cameras, the DK-33 Rubber Eyecup blocks stray light from causing glare and simultaneously improves viewing comfort.
Lightweight nylon hood, fits neatly over cameras 3.5" (16x9) diameter LCD monitor to promote comfortable and easy viewing.
Generalmente spedito entro 4 o 8 settimane
Mini hood for Canon EOS C300 & C500.
Generalmente spedito entro 4 o 8 settimane
Sachtler Bags Mini hood for Canon EOS C100
Generalmente spedito entro 4 o 8 settimane
Canon C200 handle connection cable
Tempi di consegna da 4 a 6 settimaneGeneralmente spedito 6 settimane
Use this Rubber Eyecup from Blackmagic Design as a spare or replacement for the URSA Viewfinder eyecup.
Sony ADP-MAA Shoe adapter
KineEVF Eyecushion
SmallRig Sun Hood for Atomos Ninja V 2269 is a dedicated sun hood fitted into the SmallRig Cage 2209 by 4 velcro tapes, which is easy to take on and removed. It helps to provide great viewing experience even in harsh lighting conditions.
Generalmente spedito entro 4 o 5 settimane
The skin secures around your receiver or transmitter unit using a 3M adhesive, and it prevents scratches while adding style.
The Nikon DK-19 Rubber Eyecup allows for more comfortable viewing through the camera's viewfinder, especially for eyeglass wearers. Less stray light enters the viewfinder and a less flared, clearer image with which to compose your shot is provided.
The DK-21 Rubber Eyecup attaches to the viewfinder eyepiece of select Nikon DSLRs and helps to minimize the amount of stray light entering the viewfinder for more comfortable viewing.
The Nikon DK-28 Rubber Eyecup, which improves viewing comfort when the camera is against your face, fits right onto the viewfinder of the Nikon D7500. The eyecup also blocks stray light from entering the viewfinder and creating glare, which prevents you from seeing the image clearly.
Dedicated to the Nikon Z 7 and Z 6 mirrorless cameras, the DK-29 Rubber Eyecup is a spare or replacement item for the one originally included with the camera. This eyecup blocks stray light from causing glare and simultaneously improves viewing comfort.
DK-30 Rubber Eyecup
Eyepiece shield made from comfortable soft rubber. Minimises the amount of stray light that enters the viewfinder.
The DK-32 Rubber Eyecup is dedicated for the Nikon Zfc mirrorless camera and aids in the comfortable viewing through the camera's viewfinder.
Eye Cup XT
Eye Cup XT
The Nikon DK-9 Rubber Eyecup fits Nikon N80 SLR cameras, easily mounting to the viewfinder; it provides a comfortable surface for the area around your eye, preventing scratches or damage to your eyeglasses.
Round Eyecup for GFX 50S, X-T2, and X-T1
Long Eyecup
Audio Cable for FS5,BMD,EVA1
Tempi di consegna da 4 a 6 settimaneGeneralmente spedito 6 settimane
The Nikon DK-16 Rubber Eyecup for Select Nikon Cameras is a viewfinder frame for select Nikon DSLR and SLR cameras. This eyecup is intended to prevent stray light, which could make focusing and composing an image difficult, from coming in between a compatible camera's viewfinder and the eye it is held up to.
The Nikon DK-22 Eyepiece Adapter allows the use of eyepiece accessories made for other cameras that feature the round eyepiece.
The Nikon DK-25 Rubber Eyecup is a replacement for the eyecup included with the D5300 DSLR camera. It allows for more comfortable viewing through the camera's viewfinder. It also decreases the amount of stray light that can enter the viewfinder and cause flare.
Cable, Lanc 180mm
Cable, Lanc 350mm
This 7" steel alloy 3/16" Hex Wrench from Wooden Camera is compatible with video and audio components using a 3/16" hex screw. It features a rust-resistant finish and a comfortable vinyl T-handle for enhanced torque.
Generalmente spedito entro 8 o 12 settimane
The DK-26 Eyepiece Cap from Nikon is compatible with the Nikon Df DSLR Camera. It is designed to cover the viewfinder window to keep stray light from entering the viewfinder and causing flare that negatively affects your exposures.
Camera cap for TC Bar M, magnetic
Camera cap for TC Bar S, magnetic
Shoe cap to fit over the Multi Interface shoe of your camera or camcorder
The DK-5 Eyepiece Cap from Nikon protects select camera's viewfinders from dust and moisture when not in use. It is also useful when using the self-timer or remote release functions in conjunction with long exposures, in order to prevent light from entering the viewfinder and affecting auto-exposure results.
Anamorphic License for VENICE 2 (30 days)
VENICE Extension System 2 for VENICE 2, Support of 6K/8K sensors, 3m & 12m cable included, Support of 4 Assign Buttons and Gyro Sensor, Limited Support with original VENICE, 2 years of PrimeSupport Elite coverage after registration
FullFrame License for VENICE 2 (7 days)
Full-Frame License for VENICE 2 (30 days)
Full-Frame License for VENICE 2 (permanent)
Anamorphic License for VENICE 2 (7 days)
Full HD (1920x1080) OLED Viewfinder for F5/55 Camera. Lemo connector, Knobs for brightness, Peaking and Contrast
Anamorphic License for VENICE 2 (permanent)
VENICE HFR License (Permament), FW V4.0 required
VENICE HFR License (Weekly/ 7 days), FW V4.0 required
VENICE HFR License (Monthly/ 30 days), FW V4.0 required
VENICE upgrade for 6K 3:2, 6K 1.85:1, 6K 17:9, 6K 2.39:1, and 5.7K 16:9 imaging, recording and playback
VENICE upgrade for 6K 3:2, 6K 1.85:1, 6K 17:9, 6K 2.39:1, and 5.7K 16:9 imaging, recording and playback
VENICE upgrade for 4K 4:3 and 4K 6:5 anamorphic imaging, recording and playback
HEVC 4K/HD remote production unit with ultra low latency, low bit rate, and high picture quality.