Au service des professionnels et passionnés
Mackie MDB-1P - Passiv Direct Box
Mackie MDB-1P is a passive direct box designed to connect a single instrument such as a...
Lire la suite
En savoir plus
Mackie MDB-1P Passive Direct Box
The Mackie MDB-1P is a passive direct box designed to connect a single instrument such as a guitar, bass, or keyboard to a microphone preamp for musicians and audio engineers in recording sessions, houses of worship, and live stage applications. It converts a high-impedance, instrument-level signal via its 1/4" TS unbalanced input to a low-impedance, mic-level output via its balanced XLR 3-pin jack. A 1/4" thru jack allows simultaneous connection to an amplifier or pedalboard.
A -15 dB pad reduces the input level to prevent distortion when using a high-gain source, and the ground-lift switch inhibits hum caused by ground loops. Due to its passive design, the MDB-1P requires no batteries or power supply. A sturdy steel chassis enables confident use in the studio or on the road.
- Connect an instrument such as a guitar, bass, or keyboard to a microphone preamp
- Converts a high-impedance, unbalanced 1/4" input to a low-impedance, balanced XLR mic-level output
- 1/4" thru jack for routing to an amplifier
- -15 dB pad prevents overloading when accepting signal from a loud source
- Ground-lift switch minimizes hum
- Passive design requires no batteries or power supply
Mackie MDB-1P Passive Direct Box
The Mackie MDB-1P is a passive direct box designed to connect a single instrument such as a guitar, bass, or keyboard to a microphone preamp for musicians and audio engineers in recording sessions, houses of worship, and live stage applications. It converts a high-impedance, instrument-level signal via its 1/4" TS unbalanced input to a low-impedance, mic-level output via its balanced XLR 3-pin jack. A 1/4" thru jack allows simultaneous connection to an amplifier or pedalboard.
A -15 dB pad reduces the input level to prevent distortion when using a high-gain source, and the ground-lift switch inhibits hum caused by ground loops. Due to its passive design, the MDB-1P requires no batteries or power supply. A sturdy steel chassis enables confident use in the studio or on the road.
- Connect an instrument such as a guitar, bass, or keyboard to a microphone preamp
- Converts a high-impedance, unbalanced 1/4" input to a low-impedance, balanced XLR mic-level output
- 1/4" thru jack for routing to an amplifier
- -15 dB pad prevents overloading when accepting signal from a loud source
- Ground-lift switch minimizes hum
- Passive design requires no batteries or power supply
|
Specifications |
|
Type |
Passive |
|
Input Connections |
1 x 1/4" TS unbalanced |
|
Output Connectors |
1 x 1/4" TS unbalanced |
|
Input Impedance |
140 kOhms unbalanced |
|
Output Impedance |
400 Ohms unbalanced |
|
Impedance Ratio |
350:1 |
|
Pad |
-15 dB |
|
High-Pass Filter |
None |
|
Controls |
Pad |
|
Frequency Response |
20 Hz to 20 kHz (±0.2 dB) |
|
Signal to Noise Ratio |
Not specified by manufacturer |
|
Dynamic Range |
128 dB |
|
Total Harmonic Distortion |
0.002% from 1 kHz |
|
Power Requirement |
None |
|
Current |
N/A |
|
Construction Material |
Heavy-gauge steel chassis |
|
Dimensions (H x W x D) |
1.5 x 3.4 x 5.8" / 38 x 86 x 147 mm |
|
Weight |
0.8 lb / 0.4 kg |
Accessoires
Malette de transport vidéo
-
Pelicase 1200-000-110E - Peli...
81,57 CHF HT
88,18 CHF TTC
Délai habituel entre 2 et 3 semaines
-
Besoin d'aide,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Besoin d'un financement,
Appellez-nous !
