Au service des professionnels et passionnés
Sonnet USB3C-4PM-E - Allegro USB Type-C 4-Port PCIe Card
Add four USB 3.2 Gen 2 Type-C ports to your compatible computer with the Allegro 4-Port USB 3.2 Gen 2 Type-C PCIe Card from Sonnet. Equipped with dual USB 3.2 Gen 2 controllers and capable of up to 20 Gb/s of total data throughput, this PCIe 2.0 x4 card can supply up to 7.5W of power per port to connected hard drives, SSDs, and other supported USB Type-C devices. The card is compatible with select versions of Windows, Mac, and Linux.
Features
Speed and Power
Sonnet's Allegro USB Type-C 4-Port PCIe computer card supports data transfers from a single USB 3.1 Gen 2 SSD RAID device at up to 800 MB/s. With its dual-controller design, the card can simultaneously transfer data to two connected drives at up to 660 MB/s each. With four drives connected, the four ports support simultaneous 300 MB/s transfers. The card provides 7.5W of power through each of its ports, supporting USB bus-powered hard drives and SSDs without the need to connect an additional AC power adapter.
No Auxiliary Power Required
Ordinary USB Type-C cards need a separate power plug connection. Sonnet's 4-port USB Type-C card gets the power required to operate connected drives from the slot in which it's installed. This allows you to install the Sonnet card in any compatible computer or Thunderbolt expansion chassis without worrying about the availability of extra power connectors.
Independent, Per-Port Power Regulation
Typical USB Type-C cards can deliver poor power regulation, allowing a connected drive to be forced off (auto-disconnected) when an additional drive is connected or disconnected. The Allegro card is designed to protect each port from power glitches on adjacent ports, which helps to prevent auto-disconnects.
Resettable Fuses
The Allegro card features a resettable fuse on each port that's designed to protect both card and computer should a cable or peripheral fail. Resetting a tripped fuse is simple: just shut down and restart your computer.
Optimized for Thunderbolt
Got a Thunderbolt connection, but no PCIe slot? The Allegro USB-C 4-Port PCIe card is ideal for use in Sonnet's optional Thunderbolt 2- and Thunderbolt 3-to-PCIe card expansion systems, including Echo Express and xMac desktop and rackmount chassis, allowing you to add four SuperSpeed+ USB Type-C ports to your computer without expansion card slots.
Broad Device Support, Easy Installation
The Allegro USB Type-C 4-Port PCIe card features hot-pluggable and hot-swappable device connection support with automatic device configuration, and works with most USB-IF-compliant USB peripherals. This full-height Sonnet card installs easily into most PCIe x4 (mechanical) or larger slots.
|
Specifications |
|
Hardware |
|
|
Bus Interface |
PCIe 2.0 x4 |
|
Peripherals Supported |
USB 3.2 Gen 2x2, USB 3.2 Gen 2 (USB 3.1 Gen 2/USB 3.1), USB 3.2 Gen 1 (USB 3.1 Gen 1/USB 3.0), USB 2.0, and USB 1.1 Thunderbolt 3-Only Peripherals Not Supported |
|
Bus-Powered Peripherals Supported |
HD, SSD, SSD RAID 1.5 A per Port Advertised Using USB CC (Channel Configuration) Up to 7.5 W per Port for Operation |
|
Cables Supported |
10 Gb/s USB Type-C 5 Gb/s USB Type-C 40 Gb/s Thunderbolt 3 (1.6-2.6' / 0.5-0.8 m Cables Only) 20 Gb/s Thunderbolt 3 |
|
Chipset |
2 x ASMedia 1142 |
|
RoHS Compliant |
Yes |
|
USB Support |
|
|
Standards |
OHCI (Open Host Controller Interface) EHCI (Enhanced Host Controller Interface) xHCI (eXtensible Host Controller Interface) |
|
UASP Support |
Yes (Requires macOS 10.10 or 10.12 or Later, Windows 10 or Later) |
|
Chipset Throughput |
Up to 20 Gb/s Combined Port Throughput |
|
Number of Devices Supported |
Up to 62 |
|
Hot Plug / Hot Swap Support |
Yes |
|
Boot Support |
None |
|
Compatibility |
|
|
Mac Compatibility |
Mac Pro 3,1, 4,1, 5,1, or 7,1 (2019 Mac Pro) macOS 10.10.5 or 10.12.6 or Later (Not Compatible with macOS 10.11) |
|
Windows Compatibility |
Computer with PCIe Slots Windows 10, 8.1, and 7 Windows Server 2016, 2012, and 2008 or Later (64-Bit) |
|
Linux System Requirements |
Computer with PCIe Slots Linux Kernel 5.1.9 or Later (LTS Version Only) |
|
Thunderbolt Compatibility |
Supports USB 3.0 Peripherals on a Mac or Windows PC When Installed in a Thunderbolt 2 or Thunderbolt 3 PCIe Expansion System macOS 10.12.6 or Later Windows 10 Build 1709 or Later (64-Bit Edition) |
-
Besoin d'aide,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Besoin d'un financement,
Appellez-nous !
