Arri L0.0007712 - S30-C MAN blue -silver Schuko

110070

Neuf

S30-C, Manual, Blue/Silver, 3 m DC Cable, S30 PSU, PSU Rail Mount, Standard Diffusion Panel,...
Lire la suite

Prix Visuals :

3 831,75 CHF


4 142,12 CHF TTC  

Rectangle
Garantie : garantie Garantie Visuals 12 mois
Service interne : révision, réparation & backup.

Disponibilité : clock Délai habituel entre 2 et 4 semaines

- +

110070
En savoir plus  
Arri S30-C MAN Blue - Silver Schuko

kyPanel is a compact, ultra-bright and high-quality LED soft light that sets a new standard for the industry. With a design focused on form, colour, beam field and output, SkyPanel represents the culmination of more than a decade of research and development of LED technology at ARRI.

SkyPanel will initially be available in two sizes: the S60 and S30. The S60 is a midrange model, featuring a light aperture of 645 x 300 mm and accommodating the vast majority of applications. The S30 is a smaller, more portable version; half the length of the S60, it is perfect for on-the-go mobile app ications. Both models are available in fully color tuneable and remote phosphor versions. 

Incorporating features of ARRI’s successful L-Series LED Fresnels, SkyPanel is one of the most versatile soft lights on the market, as well as one of the brightest. Like the L-Series, SkyPanel ‘C’ (Colour) versions are fully tuneable; correlated colour temperature is adjustable between 2,800 K and 10,000 K, with excellent colour rendition over the entire range. Full plus and minus green correction can be achieved with the simple turn of a knob, and in addition to CCT control, vivid color selection and saturation adjustment is also possible.

Unlike other tuneable fixtures, SkyPanel makes no sacrifice when it comes to light output. SkyPanel puts out a tremendous amount of light, in a soft and uniform beam field. Brighter than a 2 kW tungsten soft light or a 6 kW tungsten space light, the SkyPanel S60 has more than enough light for most applications. At the same time, the lamphead is able to perform beautifully at lower light levels. This range of illumination and colour gives users an unprecedented amount of control.


Firmware Upgrade 3.0

The state-of-the-art light engines and electronics built into every SkyPanel have paved the way for a powerful new feature in SkyPanel Firmware 3.0: lighting effects. With SkyPanel Lighting Effects users can now choose and manipulate 12 effects without the need for a lighting console or hours of programming. Each effect has several parameters that allow for customization of the effect to fit your needs. The lighting effects include: candle, clouds passing, club lights, colour chase, cop car, fire, fireworks, light strobe, lightning, paparazzi, pulsing, and television. SkyPanel Lighting Effects changes the game for on-set lighting effect generation.

The SkyPanel Family. Different sizes for different applications

The new ARRI SkyPanel is an exceptionally versatile LED soft light – compact, fully tuneable and delivering light of unsurpassed power and quality. Because different application areas call for different lighting needs, SkyPanel has been designed as a series of fixtures. The S60 is the mid-range model and the S30 is the smaller, more portable version. With SkyPanel, the sky is limitless...

Fully Tuneable. Get the colour you want in seconds

SkyPanel ‘C’ (Colour) versions have the ability to adjust the correlated colour temperature anywhere between 2,800 K and 10,000 K, with excellent colour rendition over the entire range. Full plus and minus green correction can be achieved with the simple turn of a knob, and in addition to CCT control, vivid colour selection and saturation adjustment is also possible.

Applications for this controllability range from quickly adjusting the CCT to set the mood of a scene, to selecting the perfect green colour to wash a green screen. Each LED light engine is computer calibrated in order to ensure unit-to-unit and batch-to-batch consistency, as well as accurate colour temperatures. The SkyPanel series of lights also works in concert with the L-Series, ARRI's LED Fresnel line, perfectly.


Tremendous Output. One of the brightest soft lights on the market

High output is usually not associated with a fully tuneable LED fixture, but with the SkyPanel ARRI has been able to accomplish both. SkyPanel has tremendous light output across the entire CCT range. Brighter than a 2 kW tungsten soft light or a 6 kW tungsten space light, the SkyPanel S60 has more than enough light for most applications. In some cases the fixture can even compete with natural sunlight; at the same time, it is able to perform beautifully at lower light levels.

True Soft Light Beam Quality

Soft and uniform is the name of the game.

Soft lights are known for their smooth quality of light and even, uniform beam field – SkyPanel is no different. The combination of the curated selection of diffusion panels, LED mixing chamber and large light aperture allows for the light to wrap around objects, eliminating sharp shadows and making for a perfect beauty light. The beam field is homogeneous in both colour and intensity.


Outstanding Colour Rendition

LED white light without sacrifices.

ARRI has always been at the forefront of LED white light colour quality and SkyPanel lives up to this standard. Natural rendition of skin tones, accurate colour reproduction and precise colour temperature settings are all areas where SkyPanel excels. Whether you measure the colour rendition using CRI (Colour Rendering Index), CQS (Colour Quality Scale) or TLCI (Television Lighting Consistency Index), SkyPanel performs beautifully.


A Single Soft, Clean Shadow. The proof is in the shadows

SkyPanel perfectly mixes some 2,000 calibrated red, green, blue and white LEDs into one homogeneous beam of soft light. In addition to providing excellent light, the SkyPanel also provides excellent shadows. The shadows are soft in nature and do not exhibit multiple edges or strange colours, making SkyPanel one of the best LED soft lights for shadow rendition on the market.

Familiar but Revolutionary. Easy to use

The SkyPanel user interface is designed to be incredibly easy to use, but also to make a wide range of controls available to the user, all at the same time. With three simple knobs, the colour temperature, green/magenta point, intensity, hue and saturation can be adjusted instantly. People who have never used the light before find the interface effective and intuitive. In addition to the on-board controls, all functions can be remotely adjusted via DMX or LAN network connections.

Versatility Built-In

Use and adapt SkyPanel according to your needs.

The SkyPanel was designed to be used primarily as a soft light to illuminate people. However, features were also designed into the fixture to make it extremely versatile. The diffusor panels on the front of the lamphead are interchangeable, so going from a heavy diffusion to a lite diffusion can be done in a matter of seconds. In addition, plans are in place to roll out further diffusion accessories that will accommodate other applications.

The SkyPanel also makes an amazing space light; by providing a large pool of downward soft light, as well as the ability to change CCT and vivid colours, SkyPanel offers a compelling alternative to conventional space lights. Other features include an on-board battery input for mobile applications, LAN port for network connectivity, USB-A port for firmware updates via thumb drive, and many more.


Powerful Mobility

Battery mode included.

The SkyPanel's low power consumption allows the fixture to be operated in many locations, using many different sources of power. With the on-board battery input, SkyPanel can easily run off industry-standard batteries. Powerful, beautiful soft light need no longer be tethered to the wall or generator. The S60 can be operated at up to 50% of its total power while on battery, and the S30 can be used at full power.


Large Aperture. Bigger is better

Having a diffused light source is not enough to make a true soft light. SkyPanel also has one of the largest light apertures in its power class; this substantial opening contributes significantly to the soft quality of light and wrapping of the source around a subject. When it comes to soft light aperture, bigger is usually better.

Remote Phosphor Version

Extra brightness, amazing colour.

In addition to the fully tuneable colour versions of the SkyPanel, remote phosphor versions are also available. To make white LEDs, phosphors are typically placed directly on a single blue LED. Remote phosphor technology uses many powerful blue LEDs to excite a panel coated in phosphors, which is positioned further away from the LEDs.

These high-quality phosphors deliver near-perfect colour rendition and outstanding light output. The remote phosphor versions of SkyPanel are roughly 10% brighter than the colour versions and have a lower price point due to less complex electronics. Different colour temperature panels are available, including 2,700 K; 3,200 K; 4,300 K; 5,600 K; 6,500 and 10,000 K.


Built to Last. Constructed with great care from durable materials

Made in Germany to the high standards for which all ARRI products are known, SkyPanel is built to last – constructed from resilient materials and assembled by hand with great care. The combination of an aluminum core with fiberglass-reinforced thermoplastics results in a solid fixture that can withstand heavy daily use on busy film sets.

The electronics have been designed to last beyond a minimum of 25,000 hours, and to be easily serviceable. The LED light engine even allows for recalibration, further enhancing SkyPanel’s credentials as a long-lasting, high-quality fixture. As with all ARRI products, a high return on investment is ensured by uncompromising engineering standards.


Features

- Fully Tuneable from 2,800 K - 10,000 K

- Plus/Minus Green correction

- Vibrant Colour Selection (RGB+W Color Gamut)

- Hue and Saturation Control

- High Colour Rendering

- Low Power Consumption (200 W Nominal)

- Tremendous Output - Brighter than 1kW Tungsten Soft Light

- Fully Dimmable from 0 - 100%

- Lightweight and Compact

- Beautiful Soft Beam of Light

- Interchangeable Diffusion Panels

- Wide Range of Accessories Available

- Thin Profile

- On-Board Battery Connection (23 - 36V DC)

- Onboard Simple Control Panel

- Onboard DMX In and Out

- RDM Implementation

- USB-A Connection for Firmware Updates

- EtherCon port for network connectivity

- Fan Mode Selection

- External Lightweight PSU

- powerCON TRUE1 Power Connector


 

 



Specifications



 



Optical System



Soft Diffusion Panel



Light Aperture



355 x 300 mm / (14 x 11.8 inches)



Beam Angle



110º (Half Peak Angle)



Weight



7.8 kg (17.2 lbs)



Handling



Aluminum Yoke, High Strength Tilt Lock, Pole Operation Option (Pan & Tilt)



Mounting



16 mm / 28 mm Combo Pin (Baby 5/8 inch / Junior 1-1/8 inch Combo Pin)



Tilt Angle



+/- 90°



Lamphead Voltage Input



48 V DC



Power Consumption



200 W Nominal, 240 W Maximum



Lamphead Power Connection



Male 3-Pin XLR - 15 amp (Pin 1: Negative / Pin 2: Positive)



Battery Connector



Male 4-Pin XLR - 10 Amp (Pin 1: Negative / Pin 4: Positive)



Battery DC Voltage



Range 23 - 36 V DC



Battery Mode Light Output



100% of Total Output



White Light



2,800K - 10,000K Continuously Variable Correlated Colour Temperature



Colored Light



Full RBG+W Colour Gamut with Hue and Saturation Control



Colour Temperature Tolerance



+/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)



Colour Rendition



CRI Average +95

TLCI Average +91



Green-Magenta Adjustment



Continuously Adjustable (Full Minusgreen to Full Plusgreen)



Dimming



0 - 100% Continuous



Control



On-Board Controller, 5-Pin DMX In and Through,

EtherCon LAN Network Connectivity, USB-A



Remote Device Management



DMX Setup, Hour Counter and Standard RDM Commands



USB Interface



DMX Setup, Fixture Status and Firmware Upgrade Through PC, Mac and USB Stick



Housing Colour



Blue/Silver, Black



Ambient Temperature Operation



-20 to +45º C (-4 to +113º F)



Protection Class



IP 20



Estimated LED Lifetime (L70)



50,000 hours



Estimated Colour Shift Over Lifetime



-200 K



Certifications (pending)



CE, FCC; GS, cNRTL, CB



Power Supply Input Range



90 - 250 V AC, 50 - 60 Hz



Power Supply Output Range



48 V DC



Power Input Connection



powerCON TRUE1 (Bare Ends / Schuko / Edison Cables Available)



Power Output Connection



Female 3-Pin XLR - 10 Amp (Pin 1: Negative / Pin 2: Positive)

powerCON TRUE1 (mains power through)



Weight



2.5 kg (5.5 lbs)



Dimensions



383 x 116 x 90 mm (15 x 4.6 x 3.5 inch)



Control



On-Board On/Off Switch



Mounting



Super Clamp Attachement / SkyPanel PSU Rail Mount




 


    Besoin d'aide,
    Besoin d'un financement,
    Appellez-nous !

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menu