Kinoflo KIT-F41U - FreeStyle 41 LED DMX Kit, Univ w/ Travel Case

1001570

Neuf

FreeStyle 41 LED DMX Kit, Univ w/ Travel Case
Prix constructeur :
5 399,63 CHF HT

Prix Visuals :

4 859,67 CHF


5 253,30 CHF TTC  

Rectangle
Garantie : garantie Garantie Visuals 12 mois
Service interne : révision, réparation & backup.

Disponibilité : clock

Délai de livraison de 4 à 6 semaines


Commandez maintenant, nous vous livrons dès que possible ou
contactez-nous pour connaitre les alternatives 022 561 07 07.

- +

1001570
En savoir plus  

Kinoflo FreeStyle 41 LED DMX Kit, Univ w/ Travel Case




This kit includes:



- 1 FreeStyle 41 LED Fixture (CFX-F41)


- 1 FreeStyle 151 LED  DMX Controller (LED-151X)

- 1 MTP-BG41 Mount w/ Baby Receiver (16mm) (MTP-BG41)

- 1 Extension cable, 25ft (X12-25)

- 1 Louver, 90° 

- 1 Travel Case (KAS-FS41-C)



FreeStyle 41 LED Fixture



Kino Flo's FreeStyle 41 LED unleashes your creative side by using a quick-release system to remove the LED panel from the plastic housing. The smaller form factor and lightweight LED panel combined with four corner bumpers add further rigging versatility. The LED panel also includes an additional mating plate so it can still be mounted on a stand. Kino Flo's FreeStyle 41 LED include three menu options, one white and two color menus. Those who prefer to work with white light can use the "white menu" that gives the user access to Dimming, Kelvin and Green/Magenta control channels. Kelvin range is from 2700K tungsten to 6500K daylight. In the color menu, the Kelvin range travels from 2500K tungsten to 9900K daylight and Kino Flo has set up a fourth channel called Gel. The Gel channel includes Kino Flo presets such as blue & green screen, sodium vapor, mercury vapor and over 100 well-known lighting gels. In addition, there is also a fifth channel called Hue Angle and sixth channel, Saturation. These two channels behave similar to a traditional color wheel, where you have white light in the center and the Hue angle determines the color along a 360-degree range and Saturation determines how much color is applied. The second color menu provides individual red, green, blue (RGB) control. The RGB menu is a great way to work with apps with predetermined RGB presets or color wheels. Kino Flo's new FreeStyle LED's also come with standard DMX and wireless DMX (Lumen Radio), 24VDC input and universal voltage input 100-240VAC (1.25 Amps at 120VAC). SnapBag Softbox and SnapGrid accessories are also available.



LED Controller - White Mode 



-  Kelvin presets & custom settings, 2700K-6500K

- Universal input 100VAC-240VAC or 24VDC

- Manual & DMX Dimming with Auto Terminate

- DMX wireless (Lumen Radio)

- Green/Magenta control

- Flicker-free, quiet operation



Gels/Hue Color Mode 



In addition to White mode features, Gels/Hue Color mode includes access to:

- Extended Kelvin color range 2500K-9900K

- Kino Flo presets and Gels

- Dial in any color through Hue Angle and Saturation control



RGB Color Mode 



Additional RGB Color mode includes:

- Individual Red, Green, Blue (RGB) control

- Works with Apps with predetermined RGB presets or color wheels



FX (Effects) Mode 



- Candle

- Fire

- TV

- Police

- Lightning

- Paparazzi

- Pulse

- Scroll



FreeStyle LED System 



The FreeStyle LED System consists of four components: FreeStyle LED Fixture, Mounting Plate, FreeStyle 151 LED DMX Controller and Extension Cable. It was designed in this manner to allow the greatest flexibility in lighting solutions for challenging situations.



FreeStyle 41 LED Fixture 



The FreeStyle LED Fixture includes built-in barn doors and is comprised of a removable LED panel and Louver. The Louver is held in place with Hook-and-loop fasteners. The LED panel can be removed from the fixture housing by pressing the locking pin and turning the thumbscrew. The fixture has a twist-on mating plate to accept a twist-on mount. The LED panel also has a twist-on mating plate to accept a removable twist-on mount and has molded corners for additional rigging options.



Mounting 



One of the design features of the FreeStyle LED Fixture is the twist-on removable Center Mount. When it's on, the fixture mounts easily to a light stand; when it's off, the fixture is flat and can be hand-held or hidden in a space too small to place a stand-mounting fixture. When the mount is removed, the grommet holes along the edge of the fixture are designed to allow the fixture to be screwed onto a wall or ceiling through its eyelets. The FreeStyle removable LED panel also has its own mating plate to accept the twist-on mount plate. The LED panel can be hand-held with the KinoGrip mount and also has molded corners as rigging points for rope hanging, for example. The stand-alone Gaffer Tray (FIX-41T) is an accessory, sold separately. The Gaffer Tray holds the removable LED panel. The KinoGrip center mount and the LED controller can be attached. The tray allows for a smaller profile fixture without having the need to bend the plastic barn doors back. When the mount and controller are removed, the tray can be screwed into the wall or ceiling through its screw points. The standard mount comes with a KinoGrip Mount with Baby Receiver (MTP-BG41) that mounts onto a baby stand. The ball and socket mount allows the fixture to be oriented in a broad range of angles. With the KinoGrip, the lightweight fixture or removable LED panel can be hand-held. There is also a short version and mount with 3/8" pin available as accessories. The yellow wire loops are there to provide attachment points for a safety chain. Mounting options include MTP-KG41 Mount with 3/8" Pin (10mm); MTP-BG41S Mount with Baby Receiver Short (16mm).



MTP-B41F 



The Kino Offset with Baby Receiver, MTP-B41F (sold separately) can be used to center the weight and balance of the fixture on a stand. It can also be under slung from a baby stand to use as an up light.



MTP-BAL1 



A Ballast Baby Mount (MTP-BAL1) is available as an accessory. The MTP-BAL1 can be used with a Mafer clamp to mount the Controller onto a stand, for example.



The FreeStyle 151 LED DMX Controller 



The FreeStyle 151 LED DMX Controller includes state of the art features; dial-in variable color temperature control; full-range dimming; programmable presets; three menu options, one white and two color menus. The "white menu" gives the user access to Dimming, Kelvin and Green/Magenta control channels. Kelvin range is from 2700K to 5500K. In the first color menu, the Kelvin range travels from 2500K tungsten to 9900K daylight and Kino Flo has set up a fourth channel called Gel. The Gel channel includes Kino Flo presets such as blue & green screen, sodium vapor, mercury vapor and over 100 well-known lighting gels. In addition, there is also a fifth channel called Hue Angle and sixth channel, Saturation. These two channels behave similar to a traditional color wheel, where you have white light in the center, the Hue angle determines the color along a 360-degree range and Saturation determines how much color is applied. The second color menu provides individual red, green, blue (RGB) control. This menu is a great way to work with Apps with predetermined RGB presets or color wheels. It operates flicker-free and does not shift color temperature when dimmed. Light levels are consistent throughout the Kelvin range. The controller can be used remotely with a 25ft extension cable or can easily be attached to the back of the FreeStyle LED fixture with Hook-and-loop fasteners. With built-in DMX and Lumen Radio receivers, the FreeStyle LED's can be controlled by DMX or DMX wireless with DMX auto terminate. The energy efficient FreeStyle 151 LED DMX Controller runs on universal input voltage from 100-240VAC at only 1.25A (120VAC) (FreeStyle 31) or can also operate 24VDC using only 6.25A.



Power 



AC Input 

The FreeStyle 151 LED DMX Controller is powered AC and includes an IEC connection. The controller includes universal input from 100-240VAC.



DC Input 

The FreeStyle 151 LED DMX Controller can also be operated on 24VDC (input range 18-36VDC) through a 3-Pin XLR. The pin polarity is:

- Pin # 1 - Ground

- Pin # 2 - +18-36VDC

- Pin # 3 - Not used



Block/KF21 Battery 

The KF21 battery can power 28.8V (20-34VDC) applications. Run time for the FreeStyle 21/31 LED is approximately 1 hour and 10 minutes at full brightness. When fixtures are dimmed, the battery will last longer. Charge time is only 1.5 hours versus Lithium batteries that take approximately 4 hours to fully charge. Unlike lithium batteries, the Kino Flo/BlockBattery is also travel friendly with no travel restrictions. The Kino Flo/BlockBattery system includes a Mafer Mount, BAT-MM1, with 28.8V output with 3-Pin XLR, 3ft. The battery slides onto the mount and mounts onto a Mafer clamp. The 3-pin XLR cable connects to the FreeStyle 151 LED DMX Controller.



DMX Operation 



The FreeStyle 151 LED DMX operates on three DMX channels (in White mode) using DMX512 (six DMX channels in Color mode). The first channel operates dimming; the 2nd channel operates Kelvin color temperature control; the 3rd channel operates the Hue. In Gels/Hue Color mode: 4th channel operates the Gel; 5th channel operates the Hue angle and the 6th channel operates the Saturation. In RGB Color mode, 4th channel operates Red; 5th channel operates Green and the 6th channel operates Blue.



Wireless Operation 



The FreeStyle 151 LED DMX Controller includes a built-in Lumen Radio receiver and can be operated wirelessly with a Lumen Radio transmitter (sold separately). Wireless is an option to using DMX cables.



The FreeStyle Extension cable 



Up to 50 feet (2 x 25ft) of extension cable can be used between the fixture and the Controller.



Light Control 



Besides the plastic louvers, another light control option is a Flozier available in half f-stop. The Flozier attaches to the barn doors and can be adjusted to various configurations.



Honeycomb Louver 



The spread of the light is controlled by means of thin wall honeycomb louvers. The advantage of these louvers is the minimal loss of light. The FreeStyle LED fixtures include a 90deg. louver. A 60deg. louver is also available as an accessory. They are lightweight and are held to the fixture with Hook-and-loop fasteners.



Kino Flo FreeStyle 41 Features



- Kelvin presets

- Dial-in color temperature control between 2500K-9900K

- Green/Magenta Control

- Hue angle and Saturation adjustments

- RGB control

- Works with Apps with predetermined RGB presets or color wheels

- Can use preset buttons to store custom Kelvin settings

- Light levels do not change when selecting Kelvin settings

- No color shift while dimming

- Color-correct with high color rendering index (CRI 95)

- Universal input 100VAC-240VAC or 24VDC

- Flicker-free, quiet operation

- Full range onboard and DMX dimming

- DMX wireless link (Lumen Radio)

- DMX Auto Terminate

- Remote fixture with built-in barn doors

- Removable LED panel with center mount and molded corner mounts

- Fixture includes removable 90 deg. Honeycomb Louver

- Honeycomb louver also available in 60 deg. as accessory

- Removable Center Mount

- KinoGrip Center Mount

- Lightweight, slim profile

- Mounts to stand, light enough to be hand-held

- Controller mounts onto fixture or operates remotely with extension cable

 


 



Specifications



 



Color Range



With required controller:


Standard Range: 2700 to 6500K


Extended Range: 2500 to 9900K



CRI



95



Operating Voltage



100 to 240 VAC, 50/60Hz (with optional controller)



Dimming Range



100 to 1%



Mount



3/8" (9.5mm) Pin



Photometrics (fc)



481 fc at 2'


161 fc at 4'


77 fc at 6'


45 fc at 8'


29 fc at 10'16 fc at 14'


12 fc at 16'


10 fc at 18'


8 fc at 20'



Photometrics (lux)



6840 lux at 0.5m


2450 lux at 1m


1210 lux at 1.5m


712 lux at 2m


462 lux at 2.5m


325 lux at 3m


242 lux at 3.5m


189 lux at 4m


153 lux at 4.5m


123 lux at 5m



Dimensions



With 6" Barndoors: 52.5 x 9 x 4" (133.35 x 22.86 x 10.16cm)



Weight



16 lbs (7.26kg)







FreeStyle 151 LED DMX Controller



The LED Controller for Kino Flo Select 21 and 31 Fixtures from Kino Flo is a detachable controller for the Select 21 or Select 31 LED heads. The controller can be mounted on the back of the lamp head or used remotely up to 25' away with an optional extension cable. It enables the fixture to produce a consistent light level across the variable 2500 to 9900K in the Color Menu. The White Menu has Dimming, Kelvin and Green/Magenta adjustment channels. The Color Menu gives you access to Gel, Hue Angle and Saturation channels. The Gel channel includes presets such as blue and green screen, sodium vapor, mercury vapor and over 100 well-known lighting gels. Hue Angle and Saturation channels act like a traditional color wheel with a 360-degree color range and choice of color intensity. The detachable controller has a display screen for menu navigation and information display, as well as physical buttons for navigation and settings. This hard-wired DMX controller is augmented by wireless DMX, which is provided by Lumen Radio. It can accept worldwide AC power and can also be powered by DC via a 3-pin XLR connector.



Features:



- Tunable Kelvin 2500K-9900K

- Dimming without color shift

- Green/Magenta control

- Dial in any color through Hue Angle and Saturation control

- Kino Flo presets and Gel presets

- Individual Red, Green, Blue (RGB) control

- Manual and DMX dimming w/ Auto Terminate

- DMX wireless link (Lumen Radio)

- Universal input 100VAC-240VAC and 24VDC


 



 



Specifications



 



Power



VAC: 100 to 240 V @ 50/60 Hz, 150 W

VDC: 18 to 36 V, 150 W

1.3 A @ 120 VAC, 7.0 A at 24 VDC



Color Temperature



2500 to 9900K in Color Menu



Dimming



100 - 1%



Dimensions



15 x 4.5 x 3.0" (38 x 11.5 x 8.0 cm)



Weight



4.5 lb (2.0 kg)





MTP-BG41 Mount w/ Baby Receiver (16mm)



Make your fixture easier to transport and handle with this KinoGrip K41 Twist-On Mount with 5/8" Baby Receiver from Kino Flo. Able to work with fixtures featuring Twist-On mating plates, this mount will add a grip handle for easier maneuvering of the light as well as a wing knob for making quick adjustments and locking the light in position.



Extension cale, 25ft



The 25' Extension Cable 150 for Select LED System from Kino Flo provides extra distance between the Select LED head and its ballast. Up to 2 extensions can be joined for a total of 50'.



Travel Case



The Travel case (KAS-FS41-C) is well suited for location transport. The rugged construction ensures that the system is well protected. The flight case holds one FreeStyle LED system, an additional louver and a medium duty stand.


    Besoin d'aide,
    Besoin d'un financement,
    Appellez-nous !

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menu