Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
Slider Stand Wheel Set
2 pièce (s) en stock
Combo Adapter Wheels Set of 3
2 pièce (s) en stock
The Manfrotto 143 is designed to hold a light fixture or camera in place, in a variety of situations. The heart of the kit is the Magic Arm, an elbow arm, with sure locking lever control at the pivot. The removable camera mount pans and locks, and has a standard 1/4-20" thread mount. With the camera mount removed, it will accept any light fixture up to...
2 pièce (s) en stock
Variable Friction Arm
3 pièce (s) en stock
Swivel Grip Head
2 pièce (s) en stock
This Turtle Base for C-Stand It is constructed of chrome-plated steel and is designed to fit optional Avenger column risers of various sizes. Its legs are designed to collapse flat for easy storage and transport
3 pièce (s) en stock
The Manfrotto 154 Triple Microphone Holder accommodates up to three microphones of any type. The entire bar mounts onto a stand or bracket with 16 mm pin and measures 65cm in length
1 pièce (s) en stock
Falcon Eyes Light Boom + Light Stand + Sand Bag LSB-3
1 pièce (s) en stock
Equipped with 1/4" (m) and 3/8" (m) camera fixing screws. Attachment via 1/4" (f) and 3/8" (f) female thread. 357PLV camera plate included. Dimensions: 140x44x6mm.
3 pièce (s) en stock
22lb/10kg Sand Bag Empty
4 pièce (s) en stock
Connector 90 degrees for Eye Coupler
1 pièce (s) en stock
The C1575B Super Clamp has strong jaws that open up to 2.16", then lock securely with the ergonomic twist handle. It has 1/4"-20 female threads, a dual locking 5/8" hexagonal female receiver for studs and arms and 2 included wedges for clamping onto flat surfaces
8 pièce (s) en stock
Background Triple Hooks for Three Backgrounds
1 pièce (s) en stock
MP Eye Coupler with 28 mm Bushing
5 pièce (s) en stock
When you need to clamp onto a support at odd angles, the Double Ball Joint Head provides the solution. Twin swiveling 5/8" spigots and single lever lock. Height: 5.7" (14.5 cm) without camera mount plate
1 pièce (s) en stock
Sand Bag Small 6kg
5 pièce (s) en stock
9" Baby Plate
4 pièce (s) en stock
Handle flowtech
3 pièce (s) en stock
12" x 18" Silk Cover
1 pièce (s) en stock
Right Angle Baby Plate
7 pièce (s) en stock
MP Eye Coupler with 16 mm Bushing
7 pièce (s) en stock
MP Eye Coupler w/28mm Spigot
13 pièce (s) en stock
The Falcon Eyes CW-5 Counterweight is a universal 4.4 kg counterweight, which is compatible with tubes with a diameter of 35 mm. The CW-5 is most commonly attached to the end of a boom arm.
3 pièce (s) en stock
LP Eye Coupler with 16mm spigot
4 pièce (s) en stock
Baby Female Wall Palte 5/8"
5 pièce (s) en stock
Stand Adapter
23 pièce (s) en stock
The Manfrotto 16mm Female Adapter with 3/8" Screw and 80mm Disc is most often used as a stand adapter. The 5/8" (16mm) receiver fits over a 5/8" "Baby" standard stud and is secured with the captive locking thumb screw. The 3/8" (9.5mm) mounting screw is a standard photo hardware size and will fit into a variety of products such as tripod heads
10 pièce (s) en stock
The C155 Safety Cable is a 3.3' long steel cable which acts as a fail-safe device for hanging overhead light fixtures with clamps. It has a load capacity of 66.14 lb. One end has a closed loop which fits through the larger, screw-lock loop
12 pièce (s) en stock
The Manfrotto 158 Adapter converts a 5/8" (16mm) light stand top to a 5/8" female socket. Use it to connect two units with 16 mm spigots, or to obtain a 16 mm female attachment from 16 mm spigot. It is aluminum, 2.56" (6.5cm) long
1 pièce (s) en stock
The Manfrotto 152 Female Convertor Socket converts a standard 5/8" (16 mm) stud to a socket which accepts 11/16" (17.5 mm) male studs
3 pièce (s) en stock
Rapid Adapter - 5/8" Stud to 3/8" Thread
28 pièce (s) en stock
Universal 16 mm spigot with double male thread 1/4 inch and 3/8 inch
19 pièce (s) en stock
Falcon Eyes Spigot for C-Stand
18 pièce (s) en stock
Adapter Small 1/4" to 3/8"
10 pièce (s) en stock
Reduces a 3/8'' threaded screw to a standard 1/4''
28 pièce (s) en stock
Short (16mm) Adapter Spigot with 1/4"-20 & 3/8" Female Threads
18 pièce (s) en stock
Coupling Assembly
Délai habituel entre 4 et 8 semaines
A powerful and versatile special wind machine designed for studios, theaters, theme parks, touring, photography and more. It is suitable for a wide range of applications including blowing haze, smoke, bubbles, confetti or snow, cooling performers, dimmer racks or amplifiers even drying paint in studio.
Kit Pneumatic Weels Inflatable
Délai habituel entre 4 et 8 semaines
Assembly Gearbox
Délai habituel entre 4 et 8 semaines
Leg with Stop
Délai habituel entre 4 et 8 semaines
Big Boom
Assembly Main Casting
Délai habituel entre 4 et 8 semaines
Foam Care-Free Semi Pneumatic Tire, 8" diameter, 2" width, Adjustable swivel and roll top brake, Quick anddamage-free installation, Pairs with 1 square tube legs
Délai habituel entre 4 et 6 semaines
ROCKnROLLERS-Monitor (Set of 3) Foam Care-Free Semi Pneumatic Tire, 8" diameter, 2" width, Adjustable swivel and roll top brake, Quick anddamage-free installation, Pairs with 1 square tube legs.
Délai habituel entre 4 et 6 semaines
The ROCK n ROLLER Mombo Wheel Set couples with the MSE Mombo Combo (377591), saving you time (and back ache) by rolling larger lights and frames, instead of picking up or breaking down the setup. Let the wheels do the work.
Délai habituel entre 4 et 6 semaines
Angular With Knob Kit Set of 4
Délai habituel entre 4 et 8 semaines
Recommended for systems DV 8/100, DV 12, Video 15 and SOOM
Délai habituel entre 4 et 8 semaines
Junior Boom
Délai habituel entre 4 et 6 semaines
Pneumatic Wheel Set for Strato Safe
Délai habituel entre 4 et 8 semaines
Assembly Gamba Liv Inox x S / Wind Up
Délai habituel entre 4 et 8 semaines
Dia. 215mm Caster W/brakes & Slevee (Set of 3)
Elephant Block 4" Set With Holder
Délai habituel entre 4 et 6 semaines
Assembly Crankcase
Délai habituel entre 4 et 8 semaines
Assembly Main Casting
Délai habituel entre 4 et 8 semaines
Elephant Block 2" Set With Holder
Délai habituel entre 4 et 6 semaines
Assembly Shaft
Délai habituel entre 4 et 8 semaines
Assembly Chain
Délai habituel entre 4 et 8 semaines
Crank Handle for Strato Safe
Délai habituel entre 4 et 8 semaines
Tube w/Attack 54 and Knob Set
Délai habituel entre 4 et 8 semaines
Height Gauge Kit L.J.S.
Délai habituel entre 4 et 8 semaines
Baby Boom
Délai habituel entre 4 et 6 semaines
Textile Grifolyn Bla/Whi 8"X8"
Délai habituel entre 4 et 8 semaines
Height Gauge Kit Black Magic
Délai habituel entre 4 et 8 semaines
Pneumatic Wheel for Strato Safe
Délai habituel entre 4 et 8 semaines
Hard Wheel Set for Strato Safe
Délai habituel entre 4 et 8 semaines
Mombo Combo Adpter Wheels (New Style - for legs 1-1/4inches x 1-1/4inches )
Délai habituel entre 4 et 6 semaines
Dia. 215mm Caster W/brakes (Set of 3)
Triple Telescopic Hanger with Universal Head
Délai habituel entre 4 et 8 semaines
Assembly Gamba + Portaruote + Ast 387XU
Délai habituel entre 4 et 8 semaines
Crank Box Assy for B201
Délai habituel entre 4 et 8 semaines
Telescopic Operating Pole ( 1.9-6.4m)
Dia. 160mm Caster W/brakes (Set of 3)
Chain
Délai habituel entre 4 et 8 semaines
Upper Body, PCB and Zoom Lever
Délai habituel entre 4 et 8 semaines
Junior Boom Arm with Counterweight
Délai habituel entre 4 et 8 semaines
This C827 Telescoping Hanger with Universal Head (Chrome-plated) is a chrome-plated steel single riser with an integrated clamp meant to support lights overhead. This heavy duty accessory has a load capacity of over 88 lb and has both a 5/8" Baby stud and a 1 1/8" junior receiver. It has amaximum height of 12.5' and a 5.54' telescoping range
Délai habituel entre 4 et 8 semaines
The C822 Telescopic Hanger and Stirrup is a chrome-plated steel accessory that allows you to suspend light fixtures or other items overhead. The two-section hanger has a range of 6.9 - 12.4' and a load capacity of 88 lb
Délai habituel entre 4 et 8 semaines
Top flap opens envelope style for quick and easy access. U grip ergonomic carrying handle. In-built heavy duty wheels.
Délai habituel entre 4 et 8 semaines
Tube With Knob Set of 2
Délai habituel entre 4 et 8 semaines
Textile Silk 8x8 feet
Délai habituel entre 4 et 8 semaines
Mini Boom
Délai habituel entre 4 et 6 semaines
Stainless Steel Leg & Brace Assembly
Délai habituel entre 4 et 8 semaines
Leg Kit for Strato Safe
Délai habituel entre 4 et 8 semaines
Assembly Colonna Terminale Complete
Délai habituel entre 4 et 8 semaines
Top flap opens envelope style for quick and easy access. U grip ergonomic carrying handle. In-built heavy duty wheels.
Délai habituel entre 4 et 8 semaines
Complete 3rd Section for Wind-Up
Délai habituel entre 4 et 8 semaines
Assembly Tubo C / Giunto
Délai habituel entre 4 et 8 semaines
Set center spider FT 75
Délai habituel entre 4 et 8 semaines
Assembly Wheel 160x50
Délai habituel entre 4 et 8 semaines
This C825 Double Telescoping Hanger with Universal Head is a chrome-plated steel single riser with an integrated clamp meant to support lights overhead. This heavy duty accessory has a load capacity of over 88 lb and has both a 5/8" Baby stud and a 1 1/8" Junior receiver. It has a maximum height of 6.6' and a 31.5" telescoping range
Délai habituel entre 4 et 8 semaines
The Avenger Telescopic Hanger and Stirrup is a chrome-plated steel accessory that allows you to suspend light fixtures or other items overhead. The two-section hanger has a range of 46 - 77.5" and a load capacity of 88 lb
Délai habituel entre 4 et 8 semaines
Assembly Column ACC60 Forata + Tappo Black
Délai habituel entre 4 et 8 semaines
Assembly Sleeve
Délai habituel entre 4 et 8 semaines
Spring Set of 3
Délai habituel entre 4 et 8 semaines
Light Boom 35 Black A25 without Stand
Délai habituel entre 4 et 8 semaines
Assembly Plug
Délai habituel entre 4 et 8 semaines
Base Complete with Feet without Bush
Délai habituel entre 4 et 8 semaines
Dia. 150mm Caster W/brake (Set of 3)
Spring Set of 10 Pcs
Délai habituel entre 4 et 8 semaines
Complete 3rd Section for Windup
Délai habituel entre 4 et 8 semaines
Recommended for all fluid heads FSB, DV and Video 15
Délai habituel entre 4 et 8 semaines
Assembly Column Zincata Wind Up Arri
Délai habituel entre 4 et 8 semaines
Complete Sprocket Column, Black
Délai habituel entre 4 et 8 semaines
Steel Pipe 90x2,5x890
Délai habituel entre 4 et 8 semaines
Complete Sprocket Column
Délai habituel entre 4 et 8 semaines
Geared Column
Délai habituel entre 4 et 8 semaines
Assembly Plug
Délai habituel entre 4 et 8 semaines
Steel Pipe 60x3x890 with Holes
Délai habituel entre 4 et 8 semaines
Assembly Sleeve
Délai habituel entre 4 et 8 semaines
Assembly Pole Boom Silver
Délai habituel entre 4 et 8 semaines
This is a Manfrotto Combi Boom Stand. Extend the second riser of this medium duty black aluminum light stand to its maximum, press a lever, and you have a stand with a two section boom arm. When used as a boom stand, its maximum load is 4.5 lbs (2 kg), strong enough for a small light fixture with a small softbox or umbrella
Délai habituel entre 4 et 8 semaines
Assembly Tubo C / Giunto
Délai habituel entre 4 et 8 semaines
Black Sprocket Column
Délai habituel entre 4 et 8 semaines
Assembly Sleeve
Délai habituel entre 4 et 8 semaines
Top Column
Délai habituel entre 4 et 8 semaines
Telescopic Operating Pole (1.3m-4m)
41 Degree Caster Adapter for 25mmx25mm Stand Leg W/caster (Set of 3)
Assembly Plug
Délai habituel entre 4 et 8 semaines
Complete Sprocket Column
Délai habituel entre 4 et 8 semaines
Tube
Délai habituel entre 4 et 8 semaines
Assembly Articulation
Délai habituel entre 4 et 8 semaines
Tube
Délai habituel entre 4 et 8 semaines
Assembly Shell with Gear for Wheel
Délai habituel entre 4 et 8 semaines
Conka Bonka Stand Extension Kit
Délai habituel entre 4 et 8 semaines
Assembly Geared Column
Délai habituel entre 4 et 8 semaines
Counterweight Bag for Mega Boom
Délai habituel entre 4 et 8 semaines
Tube
Délai habituel entre 4 et 8 semaines
Top Column, Black
Délai habituel entre 4 et 8 semaines
The Manfrotto 299B-BASE Studio Folding Base is a steel light stand base with casters, a 1-1/8" Junior receptor and a 5/8" Baby spigot. This base can be used for backlights of most sizes. Simply add a century stand column to create your own rolling stand
Délai habituel entre 4 et 8 semaines
Top Column With Gear
Délai habituel entre 4 et 8 semaines
Silver/White 185x120 cm Reflector
Délai habituel entre 4 et 8 semaines
Sprocket Column
Délai habituel entre 4 et 8 semaines
Black Sprocket Column
Délai habituel entre 4 et 8 semaines
Beefy Baby Adapter Wheels
Délai habituel entre 4 et 6 semaines
40 inches Gobo Arm with Magic Finger
Délai habituel entre 4 et 6 semaines
Hood Mount Plate Bracket Set
Hood Mount Plate Bracket Set
Column Assembly
Délai habituel entre 4 et 8 semaines
Top Column With Gear
Délai habituel entre 4 et 8 semaines
Pack for B7057 without Pellet
Délai habituel entre 4 et 8 semaines
Tube
Délai habituel entre 4 et 8 semaines
The Photo Variable Friction Arm With Quick Release Plate is ideal if you want a piece of kit that offers quick and versatile use.
Délai habituel entre 4 et 8 semaines
Assembly Shaft
Délai habituel entre 4 et 8 semaines
"T" Bar specifically design to carry six PAR 57 or 64 luminaires
Délai habituel entre 4 et 8 semaines
Assembly Plug
Délai habituel entre 4 et 8 semaines
Assembly Bushing
Délai habituel entre 4 et 8 semaines
Hard Wheel for Strato Safe
Délai habituel entre 4 et 8 semaines
Assembly Plug
Délai habituel entre 4 et 8 semaines
Assembly Plug
Délai habituel entre 4 et 8 semaines
Assembly Spider
Délai habituel entre 4 et 8 semaines
Assembly Plug
Délai habituel entre 4 et 8 semaines
Assembly Plug
Délai habituel entre 4 et 8 semaines
Assembly Bushing
Délai habituel entre 4 et 8 semaines
Grab Clamp with Spinning Pulley
Délai habituel entre 4 et 8 semaines
48" x 48" Single Scrim Black
Délai habituel entre 4 et 8 semaines
Falcon Eyes Light Stand LM-7300HA Heavy Duty 730 cm
Délai habituel entre 2 et 4 semaines
Cheese Plate 10"X14"X1/2" With a Mitchell Insert
Low Spider for Pipe 70mm & Knob
Délai habituel entre 4 et 8 semaines
Hood Mount Cheese Plate With X Slot
Mounting Stirrup for 39" Board
Délai habituel entre 4 et 8 semaines
Tube
Délai habituel entre 4 et 8 semaines
Spare Part Pack ML360 20pcs
Délai habituel entre 4 et 8 semaines
Spare Part Pack ML360-1 20pcs
Délai habituel entre 4 et 8 semaines
Tube Mounting Coupler Dia.25- 30mm W/ Spindle for Ready Rig
Lwr Spider for Pipe 90mm & Knob
Délai habituel entre 4 et 8 semaines
Grip Kit H4BAG
Délai habituel entre 4 et 8 semaines
Lwr Spider for Pipe 70mm & Knob
Délai habituel entre 4 et 8 semaines
Assembly Support
Délai habituel entre 4 et 8 semaines
This is the Manfrotto 098B Wall Mounted Black Boom Arm. Unlike the Auto Boom, which may be attached to a wall or a stand, this boom arm must be attached to a wall. It telescopes out from 47.2" to 82.6" long (1.2 - 2.1 m)
Délai habituel entre 4 et 8 semaines
Sunlite / White 185 x 120 Oval Reflector
Délai habituel entre 4 et 8 semaines
75-100mm Bowl Adapter
Délai habituel entre 4 et 6 semaines
Stainless Steel Base Column Black
Délai habituel entre 4 et 8 semaines
LWR Spider for Pipe 90mm & Knob
Délai habituel entre 4 et 8 semaines
Knob for S/Clamp Set of 50
Délai habituel entre 4 et 8 semaines
Hook for Telescopic Hanger
Délai habituel entre 4 et 8 semaines
48"X48" 1/4 Stop Silk Scrim
Délai habituel entre 4 et 8 semaines
This B9005R Ratchet Handle for the Strato Safe Stand is a replacement handle with a sure-grip vinyl-rubber handle end that snaps and locks into position. Its ratcheting action allows you to reposition the handle or make a series of small cranking adjustments in tight situations where a full 360-degree turn is not possible
Délai habituel entre 4 et 8 semaines
Main Casting
Délai habituel entre 4 et 8 semaines
Sprocket Column
Délai habituel entre 4 et 8 semaines
Boom Arm with sliding attachement, black
Délai habituel entre 4 et 8 semaines
Wheel Set with Brakes
Délai habituel entre 4 et 8 semaines
Wheel Set with Brakes (Black)
Délai habituel entre 4 et 8 semaines
10 inches C Clamp with 2-5/8 inches Pins
Délai habituel entre 4 et 6 semaines
Telescopic Wall Spreader Kit for Pipe 1-1/2" Schedule 40 (O.d.48.3mm)
Telescopic Wall Spreader Kit for Pipe 1-1/4" Schedule
Anodized rail 3m long
Délai habituel entre 4 et 8 semaines
Assembly Cable Plate
Délai habituel entre 4 et 8 semaines
Boom Arm with sliding attachement
Délai habituel entre 4 et 8 semaines
Top Spider for Pipe 90mm
Délai habituel entre 4 et 8 semaines
Stainless Steel Base Column
Délai habituel entre 4 et 8 semaines
Short Wall Boom, Black, 0.7 - 1.2m
Délai habituel entre 4 et 8 semaines
Assembly Chain
Délai habituel entre 4 et 8 semaines
Shells for Grip Head Set 5+5pc
Délai habituel entre 4 et 8 semaines
The Manfrotto Boom Assembly is comprised of three sections, extends to ~6.5 feet (2.1 m) and can easily be disassembled to 28 inch (71cm) for storage or transport.
Délai habituel entre 4 et 8 semaines
Spring Set Of 1000
Délai habituel entre 4 et 8 semaines
0 mm 2" Polyholder w/sw. Spigot
Délai habituel entre 4 et 8 semaines
China Silk Scrim 48" x 48"
Délai habituel entre 4 et 8 semaines
24" x 36" Triple Scrim Black
Délai habituel entre 4 et 8 semaines
Autopole 2 Black, 2.1 - 3.7m MT
Délai habituel entre 4 et 8 semaines
L-cheese-plate 10"(25.4cm)x 16"(40.6 Cm) With 3/8" Hole
The Falcon Eyes Autopole AP-4380M is a sturdy, professional autopole which is easy to mount between floor and ceiling or between two walls and now comes in a set of 2. The autopole has an adjustable height of minimum 245 cm (2 segments) to maximum 450 cm (4 segments). This autopole is very sturdy and comes in 3 parts (1 of which is extendable).
Délai 2 mois
Spare Part Pack ML120 30pcs
Délai habituel entre 4 et 8 semaines
Assembly Gamb LIV + Portar. + AST AVE
Délai habituel entre 4 et 8 semaines
Telescopic Poly Holder, 40mm (1,6")
Délai habituel entre 4 et 8 semaines
Shells for Grip Head Set 5+5pc
Délai habituel entre 4 et 8 semaines
Assembly Supporto C / Manopole
Délai habituel entre 4 et 8 semaines
Tube
Délai habituel entre 4 et 8 semaines
Autopole 2 2.1 - 3.7m
Délai habituel entre 4 et 8 semaines
20" Master C-stand W/ Sliding Leg & Quick Release
Autopole 2 Black 2.0-2.7m
Délai habituel entre 4 et 8 semaines
Silver / Gold oval reflector 120 cm
Délai habituel entre 4 et 8 semaines
Assembly Tube
Délai habituel entre 4 et 8 semaines
Assembly Tube
Délai habituel entre 4 et 8 semaines
All Corner for Butterfly Frame
Délai habituel entre 4 et 8 semaines
4"Castor Kit Combo Stands
4" Castor Kit Junior Roller/overheads
4" Castor Kit Baby Roller Stands
4" Castor Kit Cine Combo Stands
Slider with Cable Support
Délai habituel entre 4 et 8 semaines
Adapter 75/100 On Flowtech For Fluid Heads With 75 mm Ball On Flowtech 100
Délai habituel entre 4 et 8 semaines
L Bracket with Lock Bush
Délai habituel entre 4 et 8 semaines
All. Corner for Buterfly Frame
Délai habituel entre 4 et 8 semaines
Top Spider for Pipe 70mm
Délai habituel entre 4 et 8 semaines
Complete Leg Laser
Délai habituel entre 4 et 8 semaines
Silver / White oval reflector 120 cm
Délai habituel entre 4 et 8 semaines
Gobo Plate Media (Vesa)
Délai habituel entre 4 et 6 semaines
Assembly Steel Pipe
Délai habituel entre 4 et 8 semaines
Autopole Black extends from 210cm to 370cm
Délai habituel entre 4 et 8 semaines
Autopole 2 1.5-2.7m
Délai habituel entre 4 et 8 semaines
Textile Soft Diffuser 4' x 4'
Délai habituel entre 4 et 8 semaines
Base with 1 levelling leg, complete with feet
Délai habituel entre 4 et 8 semaines
Pack MLBATTADT-L7.2V Set of 6
Délai habituel entre 4 et 8 semaines
Complete Leg
Délai habituel entre 4 et 8 semaines
extile White Block 4' x 4'
Délai habituel entre 4 et 8 semaines
Corner Assembly
Délai habituel entre 4 et 8 semaines
Falcon Eyes Professional Light Boom + Light Stand + Water bag LSB-5
Délai habituel entre 2 et 4 semaines
Complete Leg Laser
Délai habituel entre 4 et 8 semaines
A folding stand base only. No wheels. It has a leveling leg extender for use on uneven terrain. Accepts 1-1/8" diameter Junior studs or stand risers. 8.3 in (21 cm) tall, 29.8 in (.75 M) footprint. Supports up to 88 lbs (40 kg)
Délai habituel entre 4 et 8 semaines
Friction Assembly for Pantograph
Délai habituel entre 4 et 8 semaines
Assembly Plug
Délai habituel entre 4 et 8 semaines
Wheel Set Diam 125mm, w/brakes
Délai habituel entre 4 et 8 semaines
Autopole extends from 210cm to 370cm
Délai habituel entre 4 et 8 semaines
Assembly Bushing
Délai habituel entre 4 et 8 semaines
Complete Leg
Délai habituel entre 4 et 8 semaines
Assembly Curva C / Manopole
Délai habituel entre 4 et 8 semaines
Autopole 1.5 - 2.7m, Black
Délai habituel entre 4 et 8 semaines
Reflector translucent 185 x 120 cm oval
Délai habituel entre 4 et 8 semaines
Grab Clamp with Baby Bushing
Délai habituel entre 4 et 8 semaines
Assembly Tube
Délai habituel entre 4 et 8 semaines
Collar for Pipe 80mm
Délai habituel entre 4 et 8 semaines
Detachable Heavy Duty C-clamp W/ 5/8"(28mm) Junior Receiver
Collar for Pipe 90mm
Délai habituel entre 4 et 8 semaines
Assembly Clamp
Délai habituel entre 4 et 8 semaines
Spring Set of 3
Délai habituel entre 4 et 8 semaines
Cheese Plate 10"X10"X1/2" With a Mitchell Insert
48" x 48" Silk Scrim
Délai habituel entre 4 et 8 semaines
The Manfrotto Double Articulated Arm has three adjustable sections. The 396 Series of arms is more rigid that the 196 range to support heavier loads up to 11 lbs. Its extendable sliding arm system extends up to 34 inches in length, and features a quick lock system
Délai habituel entre 4 et 8 semaines
Collar for Pipe 90mm
Délai habituel entre 4 et 8 semaines
Falcon Eyes Light Stand LM-6000HA Heavy Duty 600 cm
Délai habituel entre 2 et 4 semaines
This Manfrotto 146CS High Steel Stand Extension attaches to the top of your heavy duty stand and extends its height an additional 53 - 123.6" (1.4 x 3.1 m)
Délai habituel entre 4 et 8 semaines
Floating Leg for Wind-Up Stand
Délai habituel entre 4 et 8 semaines
Floating Leg for Wind-Up Stand
Délai habituel entre 4 et 8 semaines
Autopole 1.5 - 2.7m
Délai habituel entre 4 et 8 semaines
Textile Silk 4' x 4'
Délai habituel entre 4 et 8 semaines
Assembly Spider
Délai habituel entre 4 et 8 semaines
Floating Leg for Wind-Up Stand
Délai habituel entre 4 et 8 semaines
The MVH500AH Fluid Video Head with Flat Base from Manfrotto is designed with a wide platform, optimal for HDSLR camera bodies. Smooth and precise, it has a maximum load capacity of 17.6 lb and professional quality fluid cartridges on both its pan and tilt axes.
Délai habituel entre 4 et 8 semaines
Crank Case for Super Wind-Up
Délai habituel entre 4 et 8 semaines
Magic Arm with 035
Délai habituel entre 4 et 8 semaines
Collar for Pipe 80mm
Délai habituel entre 4 et 8 semaines
Pack for MS0490A-1 Set of 10
Délai habituel entre 4 et 8 semaines
Assembly Friction 4MT
Délai habituel entre 4 et 8 semaines
Spring Set of 100
Délai habituel entre 4 et 8 semaines
Assembly Giunto
Délai habituel entre 4 et 8 semaines
Complete Clamp Assembly
Délai habituel entre 4 et 8 semaines
Back Tube with Collar
Délai habituel entre 4 et 8 semaines
Grip Casting Complete Black
Délai habituel entre 4 et 8 semaines
Levleg + Wheel Carrier + Strut
Délai habituel entre 4 et 8 semaines
Knob with Spring Set of 100
Délai habituel entre 4 et 8 semaines
This Manfrotto 146B High Aluminum Stand Extension attaches to the top of your heavy duty stand, and extends its height an additional 53 - 123.6" (1.4 x 3.1 m)
Délai habituel entre 4 et 8 semaines
30" x 36" Double Scrim Black
Délai habituel entre 4 et 8 semaines
Steel Pipe with Knob
Délai habituel entre 4 et 8 semaines
Arm for Articulated Arm
Délai habituel entre 4 et 8 semaines
Grip Casting Complete
Délai habituel entre 4 et 8 semaines
Assembly Tubo C / Rinforzo
Délai habituel entre 4 et 8 semaines
The H6BAG Bag for Modular Frames is a sturdy synthetic fabric bag with webbed handles that encircle the entire bag for extra strength. The bag has zippered closure and can be used with the 4 x 4', 6 x 6', 8 x 8', 12 x 12' and 20 x 20' modular frames
Délai habituel entre 4 et 8 semaines
Magic Arm Alone, 630mm Long
Délai habituel entre 4 et 8 semaines
Assembly Pipe
Délai habituel entre 4 et 8 semaines
The aptly named Snake Arm from Manfrotto is an ideal accessory for photographers or videographers who want to lighten their load with a compendium piece of gripware that can replace a stand or two. Fabricated with 4 sections of aluminum tubing, the 23.6" arm is able to twist into a multitude of angles and lock down via the ergonomic T-handle
Délai habituel entre 4 et 8 semaines
Crank Case
Délai habituel entre 4 et 8 semaines
Crank Case
Délai habituel entre 4 et 8 semaines
48" x 48" Cutter
Délai habituel entre 4 et 8 semaines
COMPLETE LEVLEG SUPPORT
Délai habituel entre 4 et 8 semaines
The Manfrotto Double Articulated Arm has three adjustable sections. The 396 Series of arms is more rigid that the 196 range to support heavier loads up to 11 lbs. Its extendable sliding arm system extends up to 34 inches in length, and features a quick lock system
Délai habituel entre 4 et 8 semaines
Autopole 1.0 - 1.7m, Black
Délai habituel entre 4 et 8 semaines
Assembly Tubes
Délai habituel entre 4 et 8 semaines
Floating Leg for Wind-Up Stand
Délai habituel entre 4 et 8 semaines
Frame Section Male 800T
Délai habituel entre 4 et 8 semaines
Mini Autopole clamp bar, black, 2.1 - 3.7 m (1 pcs.)
Délai habituel entre 4 et 8 semaines
Kit Guarnizioni E Or
Délai habituel entre 4 et 8 semaines
Assembly Tube
Délai habituel entre 4 et 8 semaines
Lock Off Knob + Shoe Set 5 Pcs
Délai habituel entre 4 et 8 semaines
Variable Friction Magic Arm with Camera Bracket
Délai habituel entre 4 et 8 semaines
The Manfrotto 143A Magic Arm is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°. The lever tightens and locks for precise positioning of a small light head or camera. The Magic Arm has 5/8" studs on ball joints at both ends with 3/8 and 1/4" female threads
Délai habituel entre 4 et 8 semaines
The Manfrotto MBAG120PN Padded Tripod Bag (Black) is a padded ballistic nylon bag designed to carry Bogen/Manfrotto tripod with a head up to 45" long. Thermoform padding holds the tripod in place and protects it, especially the head, during transport. It also serves a double purpose by protecting the tripod's hard edges when it is carried
Délai habituel entre 4 et 8 semaines
Spring Set of 100
Délai habituel entre 4 et 8 semaines
Complete Leg With Fastener
Délai habituel entre 4 et 8 semaines
Collar for Pipe 70mm
Délai habituel entre 4 et 8 semaines
24" x 36" Triple Scrim Cover
Délai habituel entre 4 et 8 semaines
Micro Friction Arm Kit
Délai habituel entre 4 et 8 semaines
50mm 2.0" Polyholder with 16mm Spigot
Délai habituel entre 4 et 8 semaines
Black Back Tube with Collar
Délai habituel entre 4 et 8 semaines
Collar for Pipe 60mm
Délai habituel entre 4 et 8 semaines
Sand Bag Large 35kg
Délai habituel entre 4 et 8 semaines
Assembly Tube + Sleeve
Délai habituel entre 4 et 8 semaines
Pneumatic Wheel
Délai habituel entre 4 et 8 semaines
Collar for Pipe 70mm
Délai habituel entre 4 et 8 semaines
Plug
Délai habituel entre 4 et 8 semaines
Levleg + Wheel Carrier + Strut
Délai habituel entre 4 et 8 semaines
45mm Diameter Column + Cap & Gasket
Délai habituel entre 4 et 8 semaines
Collar for Pipe 60mm
Délai habituel entre 4 et 8 semaines
Assembly Tube and Spike
Délai habituel entre 4 et 8 semaines
Wheel Set of 3, 100mm with brakes and adapter for legs
Délai habituel entre 4 et 8 semaines
Infra Red Remote Control Only
Délai habituel entre 4 et 8 semaines
Expan Drive Set with Red Metal Chain
Délai habituel entre 4 et 8 semaines
Expan Drive Set with Black Metal Chain
Délai habituel entre 4 et 8 semaines
Expan Drive Set with Gray Metal Chain
Délai habituel entre 4 et 8 semaines
Expan Drive Set with Red Metal Chain
Délai habituel entre 4 et 8 semaines
Leg / Strut / Leg Fastener
Délai habituel entre 4 et 8 semaines
This Double Riser Column designed to fit into an Avenger turtle base. This black steel column starts at 46" (1.2 m) and has 3 sections and 2 risers. Its maximum length is 9.3' (2.8 m)
Délai habituel entre 4 et 8 semaines
Additional Spring for pantograph top 2C
Délai habituel entre 4 et 8 semaines
Assembly Tube + Hook
Délai habituel entre 4 et 8 semaines
Swiveling Pipe C Clamp W/universal Head
C Clamp W/ 1-1/4" Pipe Holder
Gold/white 95cm Oval Reflec
Délai habituel entre 4 et 8 semaines
Steel Sliding Leg 1290mm with Caps
Délai habituel entre 4 et 8 semaines
Levleg + Wheel Carrier & Braces
Délai habituel entre 4 et 8 semaines
Assembly Levelling Leg
Délai habituel entre 4 et 8 semaines
Autopole 1.0 - 1.7m
Délai habituel entre 4 et 8 semaines
The Manfrotto 396B-2 Articulated Arm supports up to 11 lbs with its built-in camera bracket. The 396B-2 offers excellent performance: robustness, lightness and versatility. The 396 family has been developed to provide greater rigidity and support than the 196 range, while maintaining flexibility thanks to its extendable sliding arm, further enhanced by...
Délai habituel entre 4 et 8 semaines
Steel Tube D=38
Délai habituel entre 4 et 8 semaines
Complete Levleg Support, Black
Délai habituel entre 4 et 8 semaines
Security Cable Set of 5
Délai habituel entre 4 et 8 semaines
Black Steel Pipe 25x1078 with Collar
Délai habituel entre 4 et 8 semaines
Grab Clamp
Délai habituel entre 4 et 8 semaines
Black Steel Pipe 25x568 + Bush.
Délai habituel entre 4 et 8 semaines
ASS TUBO C/RINFORZO
Délai habituel entre 4 et 8 semaines
Levleg + Wheel Carrier & Braces
Délai habituel entre 4 et 8 semaines
Silver / White oval reflector 95 cm
Délai habituel entre 4 et 8 semaines
This Double Riser Column designed to fit into an Avenger turtle base. This chrome-plated steel column starts at 46" (1.2 m) and has 3 sections and 2 risers. Its maximum length is 9.3' (2.8 m)
Délai habituel entre 4 et 8 semaines
Steel Pipe 35x965 with Knob
Délai habituel entre 4 et 8 semaines
Top Section with Collar & Stud
Délai habituel entre 4 et 8 semaines
Assembly Tube
Délai habituel entre 4 et 8 semaines
Central Column
Délai habituel entre 4 et 8 semaines
This is an 30" C-Stand Column. It is constructed of black steel, and is designed to fit into an Avenger C-Stand turtle base. Its main section is 30" long. When the 2 risers are extended, it is 6.75' (2.0 m) long
Délai habituel entre 4 et 8 semaines
Levleg + Brace + Wheel Carrier
Délai habituel entre 4 et 8 semaines
The Manfrotto 143N Magic Arm without Camera Bracket is designed to hold a light fixture in place, in a variety of situations. It is an elbow arm, with sure locking lever control at the pivot. It will accept any light fixture up to 6.6 lbs that has a baby (5/8") receptor
Délai habituel entre 4 et 8 semaines
24" x 72" Cutter
Délai habituel entre 4 et 8 semaines
45mm Diameter Column + Cap & Gasket
Délai habituel entre 4 et 8 semaines
Shells for Grip Head Set 5+5 Pc
Délai habituel entre 4 et 8 semaines
Baby Boom - Steel
Silver/Gold 95 cm Oval Reflec
Délai habituel entre 4 et 8 semaines
Leg / Strut / Leg Fastener
Délai habituel entre 4 et 8 semaines
Black Stell Pipe 25x818 + Bush
Délai habituel entre 4 et 8 semaines
Sunlite / White 95cm Oval Reflector
Délai habituel entre 4 et 8 semaines
The Manfrotto MBAG100PN Padded Tripod Bag (Black) is a padded ballistic nylon bag designed to carry Bogen/Manfrotto tripod with a head up to 39" long. Thermoform padding holds the tripod in place and protects it, especially the head, during transport. It also serves a double purpose by protecting the tripod's hard edges when it is carried
Délai habituel entre 4 et 8 semaines
Assembly Tube
Délai habituel entre 4 et 8 semaines
Steel Sliding Leg 1318 with Cap
Délai habituel entre 4 et 8 semaines
40 inches Hollywood Head & Arm-Complete - Black
Délai habituel entre 4 et 6 semaines
C-Type Clamp with M12 Screw
Délai habituel entre 4 et 8 semaines
MP Eye Coupler Swivel Tilt 150
Délai habituel entre 4 et 8 semaines
This is an 30" C-Stand Column. It is constructed of chrome-plated steel, and is designed to fit into an Avenger C-Stand turtle base. Its main section is 30" long. When the 2 risers are extended, it is 6.75' (2.0 m) long
Délai habituel entre 4 et 8 semaines
Runway Base Stand
C-Stand Mini Base
Délai habituel entre 4 et 8 semaines
This 20" Double Riser 4.5' Column for C-Stand is designed to fit into an Avenger turtle base. It is constructed of black steel. It has 1 section, 2 risers and extends to a length of 4.5' (1.4 m)
Délai habituel entre 4 et 8 semaines
Safety Cable Set of 5
Délai habituel entre 4 et 8 semaines
Gear Z=32
Délai habituel entre 4 et 8 semaines
Lower Tube (Old Model)
Délai habituel entre 4 et 8 semaines
Assembly Tube and Spike
Délai habituel entre 4 et 8 semaines
Steel Tube D=38
Délai habituel entre 4 et 8 semaines
Steel Tube with Cap
Délai habituel entre 4 et 8 semaines
Handle
Délai habituel entre 4 et 8 semaines
Tube For Column
Délai habituel entre 4 et 8 semaines
Top Column With Bushing
Délai habituel entre 4 et 8 semaines
Top Column With Bushing
Délai habituel entre 4 et 8 semaines
Black Levleg + Wheel Carrier & Brace
Délai habituel entre 4 et 8 semaines
China Silk SCcrim 24' x 36'
Délai habituel entre 4 et 8 semaines
Gear Box Complete
Délai habituel entre 4 et 8 semaines
Steel Extension Pole, 2 Sections, 52-87"
Délai habituel entre 4 et 8 semaines
Tripod base with 28 mm socket, steel, black
Délai habituel entre 4 et 8 semaines
40mm Diameter Column + Cap & Gasket
Délai habituel entre 4 et 8 semaines
Aluminium Pipe 25x955 with Collar
Délai habituel entre 4 et 8 semaines
Black Stell Pipe 25x818 + Bush
Délai habituel entre 4 et 8 semaines
Gear for Super Wind-Up
Délai habituel entre 4 et 8 semaines
Mini Friction Arm
Délai habituel entre 4 et 8 semaines
Wheel Set 100mm with Brakes
Délai habituel entre 4 et 8 semaines
Steel Corner for Butterfly
Délai habituel entre 4 et 8 semaines
Spring Type 12 Red. Additional spring for pantograph top 2C
Délai habituel entre 4 et 8 semaines
Pack for B6040XK Set of 2
Délai habituel entre 4 et 8 semaines
Wall Spreader Set for Pipe 1-1/4" Schedule 40 (O.d.42.4mm)
Junior Stand Extension
20 inches Hollywood Head & Arm-Complete - Black
Délai habituel entre 4 et 6 semaines
The Double Riser 4.5' Column for C-Stand is designed to fit into an Avenger turtle base. It is constructed of chrome-plated steel. It has 1 section, 2 risers and extends to a length of 4.5' (1.4 m)
Délai habituel entre 4 et 8 semaines
The Manfrotto 396AB-2 Articulated Arm supports up to 11 lbs and offers excellent performance: robustness, lightness and versatility. The 396 family has been developed to provide greater rigidity and support than the 196 range, while maintaining flexibility thanks to its extendable sliding arm, further enhanced by its quick lock system
Délai habituel entre 4 et 8 semaines
Steel Pipe 25x568 + Collar + Bush.
Délai habituel entre 4 et 8 semaines
Assembly Supporto C / Manopole
Délai habituel entre 4 et 8 semaines
Top Column with Bushing
Délai habituel entre 4 et 8 semaines
Aluminium Column with Collar
Délai habituel entre 4 et 8 semaines
Professional Variable Friction Arm
Délai habituel entre 4 et 8 semaines
Black Leg / Strut / Leg Fastener
Délai habituel entre 4 et 8 semaines
Jumbo Grip Head Black
Délai habituel entre 4 et 8 semaines
Universal Head Casting Japan
Délai habituel entre 4 et 8 semaines
Universal Head Casting Black J/V
Délai habituel entre 4 et 8 semaines
Aluminium Pipe 25x1105 with Collar
Délai habituel entre 4 et 8 semaines
Hub
Délai habituel entre 4 et 8 semaines
Assembly Crank
Délai habituel entre 4 et 8 semaines
Complete Leg With Fastener
Délai habituel entre 4 et 8 semaines
Rotating Bushing with Pin + Cable
Délai habituel entre 4 et 8 semaines
The Manfrotto 142B Aluminum Stand Extension extends the height of your heavy duty cine stand 49.2 - 82.7" (1.2 - 2.1 m). It has two black sections, one riser
Délai habituel entre 4 et 8 semaines
Aluminium Pipe 25 x 955 with Collar
Délai habituel entre 4 et 8 semaines
Crank Case
Délai habituel entre 4 et 8 semaines
Support for Butterfly with Knobs
Délai habituel entre 4 et 8 semaines
The Falcon Eyes LSB-2 Light Boom + Light Stand + Counterweight is supplied with a Double Tube Clamp, which is compatible with all light stands with a diameter of 3 cm.
Délai habituel entre 2 et 4 semaines
Black Steel Pipe 25x1078 with Collar
Délai habituel entre 4 et 8 semaines
Assembly L Box Cover
Délai habituel entre 4 et 8 semaines
Assembly Semigusci + Viterie Scatola
Délai habituel entre 4 et 8 semaines
Alluminium Leg L=1240 with Cap
Délai habituel entre 4 et 8 semaines
Manfrotto Wind Up Maintenance Tools
Délai habituel entre 4 et 8 semaines
18" x 24" Triple Scrim Black
Délai habituel entre 4 et 8 semaines
40mm Diameter Column + Cap & Gasket
Délai habituel entre 4 et 8 semaines
Slider with Cable Support
Délai habituel entre 4 et 8 semaines
Pack for MLFILTERCOL Set of 10
Délai habituel entre 4 et 8 semaines
Spare Part Pack ML360H 10pcs
Délai habituel entre 4 et 8 semaines
Assembly Tubo
Délai habituel entre 4 et 8 semaines
Column Assembly
Délai habituel entre 4 et 8 semaines
Casting for Autopole II
Délai habituel entre 4 et 8 semaines
Aluminium Pipe 25 x 1105 with Collar
Délai habituel entre 4 et 8 semaines
Light stand bag / Roll bag medium - Easy transport of many tripods. Size 110 x 22 x 22cm.
Aluminium Pipe 25 x 820mm with Collar
Délai habituel entre 4 et 8 semaines
Large Counterweight
Délai habituel entre 4 et 8 semaines
Black Leg With Fastener
Délai habituel entre 4 et 8 semaines
Pipe 610mmx3 with Pin
Délai habituel entre 4 et 8 semaines
Complete Bushing
Délai habituel entre 4 et 8 semaines
Micro Arm with Anti-Rotation
Délai habituel entre 4 et 8 semaines
Part of the Sky Track Rail System. It has a 5/8" female receptor on one side and a 1-1/8" receptor on the other. It is used to attach fixtures or accesories that have a 1-1/8" Junior spigot. Load capacity: 220 lbs (100 kg)
Délai habituel entre 4 et 8 semaines
Holder For 6 Backgrounds
Délai habituel entre 4 et 8 semaines
Assembly Tubo
Délai habituel entre 4 et 8 semaines
Allum Pipe 25x820 with Collar
Délai habituel entre 4 et 8 semaines
Gear Box Complete
Délai habituel entre 4 et 8 semaines
Allum. Pipe 25x568 + Collar + Bush.
Délai habituel entre 4 et 8 semaines
A boom is an essential tool for positioning a light fixture either directly above the photographer videographer or cinematographer to create a beautiful flat light or positioned above the subject acting as a hair light.
This A2007 Mini Base for C-Stand has a 1 1/8" receiver and is designed to accept Avenger column risers of various sizes. It is constructed of chrome-plated steel. The smaller footprint of this base enables the c-stand to be placed in crowded areas on the set
Délai habituel entre 4 et 8 semaines
Steel Pipe 25x1078 with Collar
Délai habituel entre 4 et 8 semaines
Steel Pipe 40x1117 with Collar
Délai habituel entre 4 et 8 semaines
Castor Kit (Followspot, Studio 2000,3500,5000)
Castor Kit (Easylift)
Assembly Wheel Position Stopper
Délai habituel entre 4 et 8 semaines
Bottom Column For Low Base Windup
Délai habituel entre 4 et 8 semaines
Assembly Tube + Sleeve
Délai habituel entre 4 et 8 semaines
Wind Bracing Kit for 087NW
Délai habituel entre 4 et 8 semaines
Knob Set Of 100
Délai habituel entre 4 et 8 semaines
Pack for MLSPECTRA2 Set of 6
Délai habituel entre 4 et 8 semaines
Fixed Baby Side Arm
Délai habituel entre 4 et 8 semaines
Brake Bushing
Délai habituel entre 4 et 8 semaines
Steel Sliding Leg 915mm w/Caps
Délai habituel entre 4 et 8 semaines
The Claw
Délai habituel entre 4 et 6 semaines
Assembly Croc Inf + Manop Avenger
Délai habituel entre 4 et 8 semaines
Tripod Bag Padded 120cm
Délai habituel entre 4 et 8 semaines
Long Pipe for Butterfly Frame
Délai habituel entre 4 et 8 semaines
10"X42" CUTTER
Délai habituel entre 4 et 8 semaines
Pivoting Clamp
Délai habituel entre 4 et 8 semaines
Assembly Main Casting + Knob
Délai habituel entre 4 et 8 semaines
Steel Pipe 25x818 with Collar Black
Délai habituel entre 4 et 8 semaines
Assembly Spider
Délai habituel entre 4 et 8 semaines
Falcon Eyes Autopole AP-4500H H 1,50/4,50 m
Délai habituel entre 2 et 4 semaines
18" China Ball Bracketw/e27 Socket
10" C-type W/ Baby Stud
18’’ China Ball Bracket W/e27 Scoket
Steel Pipe 25x818 with Collar
Délai habituel entre 4 et 8 semaines
Bottom Casting
Délai habituel entre 4 et 8 semaines
Allumin. Pipe 25x1078 with Collar
Délai habituel entre 4 et 8 semaines
Assembly Shell for Wheel
Délai habituel entre 4 et 8 semaines
Tube + Sleeve
Délai habituel entre 4 et 8 semaines
Suction Cup
Délai habituel entre 4 et 8 semaines
Universal Head Casting
Délai habituel entre 4 et 8 semaines
Super Clamp Grip Head
Délai habituel entre 4 et 8 semaines
Flextension Kit with Flag
Délai habituel entre 4 et 8 semaines
Universal Head Casting
Délai habituel entre 4 et 8 semaines
Assembly Tube
Délai habituel entre 4 et 8 semaines
Assembly Gamb LIV Black + Portar. + Ast
Délai habituel entre 4 et 8 semaines
Bottom Column for Wind-Up + Cap
Délai habituel entre 4 et 8 semaines
Pack for 387XU Set of 2
Délai habituel entre 4 et 8 semaines
Pack for A2018L Set of 5
Délai habituel entre 4 et 8 semaines
Assembly Crank
Délai habituel entre 4 et 8 semaines
Main Casting
Délai habituel entre 4 et 8 semaines
Steel Tube D=38
Délai habituel entre 4 et 8 semaines
Universal Head Casting 25mm 5/8
Délai habituel entre 4 et 8 semaines
Levleg & Brace + Knob
Délai habituel entre 4 et 8 semaines
3rd Tube Section for A330
Délai habituel entre 4 et 8 semaines
Inner Carton Set of 10
Délai habituel entre 4 et 8 semaines
Aluminum Leg L=962 with Cap
Délai habituel entre 4 et 8 semaines
Steel Pipe 25x930 with Collar
Délai habituel entre 4 et 8 semaines
Tube Kit for 1005BAC
Délai habituel entre 4 et 8 semaines
The Manfrotto MBAG90PN Padded Tripod Bag (Black) is a padded ballistic nylon bag designed to carry Bogen/Manfrotto tripod with a head up to 35" long. Thermoform padding holds the tripod in place and protects it, especially the head, during transport. It also serves a double purpose by protecting the tripod's hard edges when it is carried
Délai habituel entre 4 et 8 semaines
Spring Type 4 Blue. Additional spring for pantograph top 4C
Délai habituel entre 4 et 8 semaines
Wheel Set of 3, 75mm with brakes and adapter for legs
Délai habituel entre 4 et 8 semaines
Bottom Casting
Délai habituel entre 4 et 8 semaines
Universal Head Casting Black
Délai habituel entre 4 et 8 semaines
Upper Tube Section for A410C
Délai habituel entre 4 et 8 semaines