Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
Adapter
2 pièce (s) en stock
Recommended for Retrofits other tripods and Monopod
1 pièce (s) en stock
Bazooka basket 100 mm bowl base diameter
1 pièce (s) en stock
Base plate for Sony PMW-F5 & F55.
1 pièce (s) en stock
For fluid heads with 100 mm ball on tripods Cine 150 lang and Cine 150 medium
1 pièce (s) en stock
Adaptor to quickly mount a slider on a 75 mm tripod with SpeedSwap ; includes Sideload plate
1 pièce (s) en stock
Half bowl for 100 mm bowl Tripods with interchangable 1/4" and 3/8" mounting screw
2 pièce (s) en stock
Telescopic pan bar + attachment for Master Mk2 - Master 30 - Maxima 30
1 pièce (s) en stock
European attachment adapter for Bazooka basket on P70+ Pedestals
3 pièce (s) en stock
Adapter for fluid heads Video 18 SB/Plus on Pedestal C I
1 pièce (s) en stock
Lifto25 bluetooth remote control for Lifto 25.
8 pièce (s) en stock
Pedestal Adapter for Focus 18 and Focus 22 on P20 Pedestal
1 pièce (s) en stock
Pedestal Adapter for PTZ camera to P20 pedestal
1 pièce (s) en stock
75mm half bowl for tripods 1/4" and 3/8" mounting (w/one interchangeable screw)
2 pièce (s) en stock
for CINE30 CINE/EFP/ENG Fluid Head
4 pièce (s) en stock
Solid ball head for compacts, CSC, DSLR, video cameras/camcorders
3 pièce (s) en stock
for V60S EFP Fluid Heads
5 pièce (s) en stock
Camera Plate for Master 25 (w/two 3/8" screws)
5 pièce (s) en stock
Recommended for FSB, Cine DSLR, and DV 2 - DV 8/100 fluid heads.
1 pièce (s) en stock
Camera plate for Focus 12, Focus 18 and Focus 22 Fluid Heads (with pin + 1/4" and 3/8" screws)
6 pièce (s) en stock
For V35P Fluid Heads
5 pièce (s) en stock
Recommended for for fluid heads FSB 6 T, FSB 8 T, FSB 10 T and DV 2, DV 4, DV 6, DV 8, DV 10, aktiv8T
2 pièce (s) en stock
This Rotatable Horizontal-to-Vertical Mount Plate Kit for Sony Mirrorless Cameras from Smallrig is a faster and more versatile alternative to using a conventional L-bracket to mount select Sony mirrorless cameras to a tripod head.
1 pièce (s) en stock
Tripod Bag-Studio Bag for the 1314 Kit
1 pièce (s) en stock
Red Lock hooking rubber feet for Red Lock - SDS tripod (3 pcs)
4 pièce (s) en stock
Touch & Go plate 16 for fluid heads DV 12, Video 15, Video 18, Video 20, Video 25 Plus and Video 18 Dutch
5 pièce (s) en stock
Recommended for fluid heads DV 2, DV 4, DV 6, DV 8, FSB 6 T, FSB 8 T, FSB 10 T, aktiv8T
6 pièce (s) en stock
For all Camgear T75/100 and 3S-FIX T75/100 tripods and other tripods with 16mm diameter tube
1 pièce (s) en stock
Camgear Elite Pan Bar for Elite 8, Elite 10, Elite 12 & Elite 15 Fluid Heads / Tripod Systems
1 pièce (s) en stock
Reduction ring 100mm to 75mm
2 pièce (s) en stock
Sideload plate S for fluid head aktiv6, aktiv8, aktiv10, FSB 4, FSB 6, FSB 8, FSB 10 and Ace
5 pièce (s) en stock
for MARK Lite, MARK 4 & MARK 6 Fluid Heads
2 pièce (s) en stock
V-Mount batteries cable for Lifto 25
4 pièce (s) en stock
Tiltall BW-25 ball head
5 pièce (s) en stock
for MARK Lite, MARK 4 & MARK 6 Tripod Systems
1 pièce (s) en stock
Base plate Low for high camera (Eos 1D model).
1 pièce (s) en stock
Plate supplied with 1/4'' and 3/8'' camera fixing screws.
2 pièce (s) en stock
The mid-level spreader helps prevent stability that a ground-level spreader can suitable when working on uneven surfaces, the best tripod stand for camcorder, Home DV, Video Camera, Digial camera, Long focus camera, Mirrorless camera
99 pièce (s) en stock
for MARK Lite, MARK 4 & MARK 6 Tripod Systems
4 pièce (s) en stock
Chain Guard
3 pièce (s) en stock
For quick release system with dovetail clamping and blocking screw (Arca-Swiss compatible). 1/4" camera screw
4 pièce (s) en stock
For quick mounting of camera on tripod. The upper part is mounted on the cameras tripod bush and stays there, the lower part is attached to the tripod
8 pièce (s) en stock
Metal joint for clamp fastening of flashguns, lights and accessories with standard ISO foot on tripods and fixtures with 16 mm standard spigot or via the included adapter on 1/4" or 3/8" connecting threads
16 pièce (s) en stock
For quick release system with dovetail clamping and blocking screw (Arca-Swiss compatible). 1/4" camera screw
15 pièce (s) en stock
3/8In camera-screw long.
19 pièce (s) en stock
Camera screw 1/4" long
47 pièce (s) en stock
Vocas 1/4" Camera Screw can be used as a replacement screw for any Vocas rig component like a Vocas camera plate that requires such a screw
51 pièce (s) en stock
Camera screw 3/8" long
64 pièce (s) en stock
Vocas 3/8, inches Camera Screw can be used as a replacement screw for any Vocas rig component like a Vocas camera plate that requires such a screw.
71 pièce (s) en stock
Tablet Tripod Adapter
12 pièce (s) en stock
Remote Universal Bluetooth Control
22 pièce (s) en stock
Fluid head + 1 telescopic left pan bar + tie down knob
Motorized descending column (Tuning Totem 50)
Délai habituel 6 semaines
Allows a thirdparty control system to integrate with the µVRC
Analogue Lens Interface
Firmware upgrade to the robotic or manual/robotic heads and pedestal to enable tracking.
4.5 Kg(10 lb) payload head, robotic only. External 24v PSU with built in lens drive for full servo digital lens from Canon and Fujinon, Lanc interface and lens motor drive option.
Track termination. ( 2x track termination with shock absorbers, includes, magnetic strips and tooth belt track clap and belt)
Allows multiple µVRC to share control. Also allows interaction with HD-VRCs
Adds the ability to create keyframe based sequenced shot for Vinten ICE robotic products, and later
For use with the HDT-1 tripod, the elevation unit gives (no tripod supplied) a unit stroke of 46 cm / 18 for quick height range.
VRC Geofencing License
Vinten Vantage external lens drive motor and mounting accessories
Increases the number of Vinten heads that can be controlled to unlimited
3 Way Leveller XL Mitchell to Mitchell
3 Way Leveller XL Euro to Mitchell
TX Box and Pedal Control
For a smooth footage The Vibration Isolator (310064) absorbs pulsations in the X- and Y-axis. Smoother shots without disturbing vibrations are the result. A flat design keeps your camera lens as low as possible. Ergonomic Drag and Brake knobs are integrated.
Obscura post production tent
Telescoping Bazooka 24"
Délai habituel entre 4 et 6 semaines
3m radius - 30°Curve piece (12 pieces for 360°-radius in the middle of track), includes 2 track connection clamps
4m radius - 15°Curve piece (24 pieces for 360°-radius in the middle of track), includes 2 track connection clamps
Anticollision systems, required when 2 dollys on one track
Set of Studio Wheels With Cable Guards.
Osprey OB wheel set (set of 3)
2stage heavy duty carbon fiber tripod with 150mm bowl
Délai habituel entre 2 et 3 semaines
Studio wheels group, diameter 160mm (3x2 coupled Studio wheels) for P90 Pedestal
Zoom/focus desktop control box for professional/broadcast lenses
Additional lens drive motor (for use with Vantage Lens Drive Assembly)
3-ways Leveller for flat base Fluid Heads on Studio and Heavy Duty Tripods
Studio wheels Kit
Pneumatic/OB wheels Kit
Studio wheels group (High-Quality), diameter 125mm (3x2 coupled vulcanized Studio wheels) for P70 Pedestal
includes Large Euro Plate (08285).
Tube
Délai habituel entre 4 et 8 semaines
2stage heavy duty carbon fiber tripod with 100mm bowl
Délai habituel entre 2 et 3 semaines
Geared Platform Plate Assembly c/w Screws
TP: Mitchell Mount BP: Mitchell w. cable slot
Off-set Leveller (long) TP: Mitchell BP: Euro
Adds control of Vinten Hexagon robotics
Adds control of Vinten ICE and Fusion robotics
2m Straight Track, includes 2 track connection clamps
Offset 4-Way-Leveller XL (550mm)
3 Way Leveller Euro to Mitchell
Off-set leveller (short) TP: Mitchell BP: Mitchell
Off-set Leveller (short) TP: Mitchell BP: Euro
Offset 4-Way-Leveller long (350mm)
This adjustable locking spreader is compatible with both Ronford-Baker and O'Connor tripods, and it is easy to adjust the length of each arm using a locking knob to telescope out each extension.
Délai habituel entre 4 et 6 semaines
Offset 4-Way-Leveller medium (250mm)
2stage heavy duty tripod with 150mm bowl
Délai habituel entre 2 et 3 semaines
TP: Euro Mount BP: Mitchell w. cable slot
This adaptor provides a flat base with a standard 4 hole fixing that may be mounted directly onto Outside Broadcast scaffolding.
Offset 4-Way-Leveller short (184mm)
The Vinten 3328-30 Quickfix Adapter with four-hole flat base is capable of supporting 100 lbs (45.0 kg) gross payloads.
Large Still Life Shooting Table with 79 x 49" Plexiglass Panel. Black Frame
Délai habituel entre 4 et 8 semaines
TP: Mitchell Mount BP: Mitchell 1-14
Large Still Life Shooting Table with 79 x 49" Plexiglass Panel
Délai habituel entre 4 et 8 semaines
TP: Mitchell Mount BP: Mitchell M24
Upgrades the FP-188 pedestal to an FP-188+, allowing integration with ICE robotic heads.
Upgrades the FBH-175 height drive to an FBH-175+, allowing integration with ICE robotic heads.
1m Straight Track, includes 2 track connection clamps
Assembly Washer Set of 500
Délai habituel entre 4 et 8 semaines
Pneumatic wheels group, diameter 200mm (3x2 coupled OB tyres) for P70 Pedestal - D736/P dolly
The Vinten 3355-3 Hard Transit Case is designed to protect the Vinten Vector 70 or 700 tripod heads during shipping.
Knob Set of 1000
Délai habituel entre 4 et 8 semaines
Set of 5 Bazooka Elements (h100mm - 200mm - 300mm - 400mm - 500mm)
Bazooka riser for Bazooka column
Riser - Adjustable (h330mm - stroke 160mm)
Track wheels Kit
Turnstile Mount
4 Way leveler with Standard Mount
Folds for easy transportation,Lightweight,compact and Supports up to 45 kg.
Riser - Adjustable (h250mm - stroke 80mm)
Expander Set Of 100
Délai habituel entre 4 et 8 semaines
Riser - Adjustable (h210mm - stroke 40mm)
Wheels Set of 3
Délai habituel entre 4 et 8 semaines
Skating wheels group for D734/A dolly - P20 Pedestal to rail (3x4 wheels)
Clamp & Knob for 2935 Set of 100
Délai habituel entre 4 et 8 semaines
4 Ways leveller for flat/Mitchell base heads
Includes Large Euro Plate (08285).
Enables a suitable pressure source to be easily connected to any Vinten pedestal.
Quickfix adapter on pedestals and tripod OB 2000 for Video 90 FB and for Video 25 Plus FB - Video 75 Plus Studio with #3914
Délai habituel entre 4 et 8 semaines
Spread-Loc Mid-Level Spreader with a set of 3 carpet feet
Euro Adapter 360° twistable Euro to System-Low-Rig
Quickfix kit Vario 1-70 / Vario 2-80
Délai habituel entre 4 et 8 semaines
Euro Adapter 360° Twistable Double-Euro
2stage heavy duty tripod 100mm bowl
Délai habituel entre 2 et 3 semaines
Gear Box Comp with Security
Délai habituel entre 4 et 8 semaines
Includes Mini Euro plate (08427).
Euro Adapter 360° twistable Euro to Euro
3x Aluminum Combo Stand
Délai habituel entre 4 et 6 semaines
This adaptor provides a quick-release fixing for EFP cameras weighing up to 45 kg (100 lb) with 3761-13 Wedge.
Top load platform, includes slide plate assembly (V4045-1901).
Accessory tiller bar
Focus remote control for professional/broadcast lenses w/ enable button
The 3100-3 Quickfix Adapter with 4-Hole Flat Base from Vinten is designed for use with Vision Ped Plus, Pro-Ped, Osprey Light, Elite, Quartz One and Two, Quattro-L, OBL and SL pedestals.
Track-skate-wheels (4.Pcs)
Molded Case for Model Cine HD Tall Tripods + 1030/1040 Tripod Systems in soft bag
Housing Gear, 30 Pcs Kit
Délai habituel entre 4 et 8 semaines
Stainless Steel Adjustable Leg
Délai habituel entre 4 et 8 semaines
Universal joint
The heavy-duty Quickfix adaptor has an extended capacity range of up to 100 kg / 220.5 lbs. Compatible with the Heavy Duty Vinten Tripods and pedestal.
This adaptor allows a 4 hole flat-base pan and tilt head to be installed on a heavy-duty tripod with a Mitchell fixing.
Wooden Camera - 2060/2575/120EX Dovetail (24 inches)
Délai habituel entre 8 et 12 semaines
Plates for TRUSS
Délai habituel entre 4 et 8 semaines
Dutti Dolly Tripod Wings
Délai habituel entre 4 et 6 semaines
Mitchell Base
Increases the number of Vinten heads that can be controlled to 8
Licence to control a single PTZ (Sony, Panasonic or Canon)
Add paint/shading control for a single broadcast camera (Sony)
Optional camera mounting cradle to allow payloads that need to be offset too excessively, to be balanced easily and add stablity
Asm Gamba Inox Liv S / Wind Up
Délai habituel entre 4 et 8 semaines
Rail Clamp Head Support for 75/100mm bowl base heads
Micro Joystick PLUS (V2) for PT Head
Délai habituel 2 semaines
Geared Section w/Collar
Délai habituel entre 4 et 8 semaines
This spreader provides stability for Heavy-Duty tripods. Its flexibility means that it can cope with uneven terrain and the hinged construction enables it to fold with the tripod.
for 30L & 60L tripods.
This adaptor provides a quick-release fixing for cameras weighing up to 25 kg (55 lb) with 3763-11 Wedge.
for 120EX only, with 08417 Tiedown.
Carbon fibre mid-level spreader for Flowtech.
Camera Plate Dual Support for AH833, ARRI, RED, O'CONNOR, and STEADICAM (reduction bar included)
Heavy Duty - Adjustable, for T724 - T724/2 series tripods (w/tripod adapters)
Aluminium adjustable mid-level Spreader for Heavy Duty and Studio Tripods (1 and 2 stages)
Aluminium mid-level Spreader for Elevation Unit Tripod
Mitchell head attachment for Jibo
Sachtler 7063 Dolly DV 75 for use with all Sachtler tripods with 75mm bowlincluding the Speed Lock 75 CF (4588), ENG 75/2 D (4188), DA 75 L (4183).??
Délai habituel entre 4 et 8 semaines
for Model Cine HD Baby Tripods.
Mitchel flat base Leveller with spherical joint for Fluid Heads on Mitchell base Tripods and Pedestals
Adapter Fast Lock for Master Mk2 - Master 30- Master 65 - Magnum
Complete Crank Case
Délai habituel entre 4 et 8 semaines
ARRI style dovetail plate 12" (30 cm)
Seat Kit
Molded Case for 30L, 60L & Flowtech tripods.
This adaptor allows pan and tilt head with a standard Vinten four-hole base to be mounted on a Mitchell base. Load capacity 100 kg (220 lb).
Eyepiece Leveller EL-3 Set. Includes: K2.47767.0 1x Eyepiece Leveller EL-3, levelling rod; K2.47768.0 1x Sachtler Fluid Head Adapter Kit for EL-3
Assembly Scatola Sollevamento B250
Délai habituel entre 4 et 8 semaines
with two x 3/8 inches - 16 screws (08274).
Molded Case for 1030/1040 (+ 30L or Flowtech) Systems (without bag)
Mid-Level Spreader for flowtech 100
Complete Gear Box
Délai habituel entre 4 et 8 semaines
Osprey OB wheel cable guards (set of 3)
Cylindrical floor standing target in a kit format. Enables the target to be colour coded to the studio/application. Customer to paint, assemble and supply own colour filter.
APS cylindrical floor standing target in black.
Levelling legs "long" (4.Pcs)
Assembly Attacco Ruota
Délai habituel entre 4 et 8 semaines
OConnor Eyepiece Leveler Bracket - for all OConnor heads
Elevated Extension Adapter for 100mm Bowl Tripods
Délai habituel entre 2 et 3 semaines
Still Life Panel
Délai habituel entre 4 et 8 semaines
Set of 50 Assembly Collar 19-22
Délai habituel entre 4 et 8 semaines
Levelling legs "short" (4.Pcs)
Platform Set 4
Set of 50 Assembly Collar 16-19
Délai habituel entre 4 et 8 semaines
Wooden Camera - 2060/2575/120EX Dovetail (18 inches)
Délai habituel entre 8 et 12 semaines
Plexiglass Panel Only for Large Still Life Shooting Table, 79 x 49"
Délai habituel entre 4 et 8 semaines
Set of 50 Assembly Collar 13-16
Délai habituel entre 4 et 8 semaines
Telescopic Pan Bar & Clamp for for Vector 70, 90, 450, 700 & 950
The Vinten Vector Head Pan Bar is for use with the Vector 430i Pan / Tilt Head.
Complete Geared Column
Délai habituel entre 4 et 8 semaines
Assembly Base without Center Column
Délai habituel entre 4 et 8 semaines
for Flowtech tripods
Complete Geared Column
Délai habituel entre 4 et 8 semaines
Black Aluminium 6-Sections High Super Stand 1 Levelling Leg
Délai habituel entre 4 et 8 semaines
ARRI style dovetail plate for 1030/1040
Rostrum (1,0 x 1,0 x 1,0 m)
Assembly Tube
Délai habituel entre 4 et 8 semaines
Assembly Column
Délai habituel entre 4 et 8 semaines
Vertical Clamp to Euro Male Adapter
Adaptor to mount a slider to a Sachtler 100 mm tripod with installed aktiv 100 mm bowl connector
Délai habituel entre 4 et 8 semaines
The Libec KR-15 Kick Ring for P1000 Pedestal System attaches to your pedestal and provides you with a convenient way to aid the movement of the pedestal by pushing with your foot.
Délai habituel entre 2 et 3 semaines
Leg Kit of Strato Safe
Délai habituel entre 4 et 8 semaines
The Manfrotto Telescopic Operating Pole consists of three aluminum sections with two risers. Fully extended, it measures 21.25' (6.4 m) long. Each section has a twist-lock. At the end is a hook to facilitate tilting, panning, focusing or re-aiming of light fixtures mounted high above the studio floor. It's closed length is 6.5' (2 m)
Délai habituel entre 4 et 8 semaines
Assembly Tube
Délai habituel entre 4 et 8 semaines
For Vinten & Sachtler studio Pedastals and Tripods
Truss connection plate for Euro mount
150 mm Ball Base
Mitchell Base
Mitchell base plate with cable slot
Complete Geared Column, Black
Délai habituel entre 4 et 8 semaines
Rostrum (0,5 x 1,0 x 1,0 m)
Assembly Column Super Wind UP3SCTN Black
Délai habituel entre 4 et 8 semaines
Complete Geared Column, Black
Délai habituel entre 4 et 8 semaines
Aluminium ground Spreader for Heavy Duty Baby Tripods
Truss connection plate for Mitchell mount
Front End Handle, small rosette
Assistants Front Box
This adaptor allows a pan and tilt head with a Mitchell centre screw to be installed on a standard Vinten four-hole base. Load capacity 100 kg (220 lb). Black
for flowtech tripods.
Studio - Baby & Mini Baby Ground Spreader for T724/B - T624/S series tripods
Left Part of Gear Box
Délai habituel entre 4 et 8 semaines
Steering ring, large
Front End Handle (for 2065, 2575 & 120EX)
Assembly Sleeve
Délai habituel entre 4 et 8 semaines
High hat bowl riser for 150mm bowl - Euro Mount Version
Heavy Duty Ground Spreader for T625 series tripods
1/4" Camera Screw With Nut set of 50
Délai habituel entre 4 et 8 semaines
Handle
Délai habituel entre 4 et 8 semaines
Steering ring, small
The two-axis MAC-1 monitor arm allows for rapid positioning of the CCM-1 without affecting the horizon relative to the camera. The MAC-1 features an adjustable friction system for one-handed repositioning and inserts for different mounting standards (1/4" ARRI Pin Lock and SmallHD Pins).
4-Bolt Flat Base to 150mmBowl Adaptor
Floor Spreader, Lightweight, easily installed or removed (quick-release) -black
Clamp Knob Set of 500
Délai habituel entre 4 et 8 semaines
Assembly Tubes
Délai habituel entre 4 et 8 semaines
Foam Fill Wheels Strato
Délai habituel entre 4 et 8 semaines
Aluminium mid-level Spreader for Heavy Duty Tripods (2 stages only)
Aluminium mid-level Spreader for Heavy Duty Tripods (1 stage only)
Aluminium mid-level Spreader for Studio Tripods (1 stage only)
Aluminium mid-level Spreader for Studio Tripods (2 stages only)
Extending Mechanism
Délai habituel entre 4 et 8 semaines
Mitchell wedge Lock for flat/Mitchell base heads
Black Aluminium 4-Sections Super Stand 1 Levelling Leg
Délai habituel entre 4 et 8 semaines
Short Wedge Plate for Vector 950, 750 & 90. It is intended for use where a standard length wedge would obstruct the camera cooling fan inlet.
Kick Ring Pedestal
Cine Style slide for SpinHead
Camera Plate Support eurostyle quick release for Master MK2, Master 30, Maxima 40/">Maxima 40 and Maxima 30 Fluid Heads
Extension 440mm
Studio Ground Spreader for T724 series tripods
OConnor Assistant's Front Box Mount
Levelling legs "long" (3.Pcs)
Adapter - Set of 30
Délai habituel entre 4 et 8 semaines
This adaptor allows a Mk 5 or Vector pan and tilt head to be mounted on a Mitchell base.
Leg Kit for Strato-Safe
Délai habituel entre 4 et 8 semaines
MINI FLOOR SPREADER - FOR BABY LEGS TRIPODS.
Complete Geared Column
Délai habituel entre 4 et 8 semaines
High hat bowl riser for 75/100mm bowl - Euro Mount Version
Levelling legs "short" (3.Pcs)
Steel Pipe 80x3x1200 with Holes
Délai habituel entre 4 et 8 semaines
Steel Pipe 70x3x1330 with Holes
Délai habituel entre 4 et 8 semaines
Steel Pipe 50x3x1590 with Holes
Délai habituel entre 4 et 8 semaines
Standard Wedge Plate for Vector 950, 750 & 90. It is secured to the underside of a camera and may be installed in a wedge adaptor.
150mm Levelling Bowl Adaptor with Quickfix ring and 4-bolt flat base.
High hat bowl riser for 100mm bowl - Euro Mount Version
European attachment adapter flat/Mitchell base w/castle nut
Tripod adapter with euromount 150mm
The Mitchell pillar extension is characterized by its low weight and high torsional rigidity.
Steel Pipe 60x3x1460 with Holes
Délai habituel entre 4 et 8 semaines
for OB/Studio Tripod Systems
Délai habituel entre 2 et 8 semaines
The Manfrotto Telescopic Operating Pole consists of four aluminum sections with three risers. Fully extended, it measures 13' (4 m) long. Each section has a twist-lock. At the end is a hook to facilitate tilting, panning, focusing or re-aiming of light fixtures mounted high above the studio floor. It's closed length is 4.6' (1.4 m)
Délai habituel entre 4 et 8 semaines
Diameter: 160mm with brakes and M10 attachment Set of three
Délai habituel entre 4 et 8 semaines
Wooden Camera - 2060/2575/120EX Dovetail (12 inches)
Délai habituel entre 8 et 12 semaines
Right Part of Gear Box
Délai habituel entre 4 et 8 semaines
Assembly Spider + Bushing
Délai habituel entre 4 et 8 semaines
Column Stand with Sliding Arm (Black), 8' (2.4m)
Délai habituel entre 4 et 8 semaines
High hat bowl riser for 75mm bowl - Euro Mount Version
Chrome Steel Column Stand with Sliding Arm, 8.2'
Délai habituel entre 4 et 8 semaines
Euro Style Quick release for SpinHead
Crank Case
Délai habituel entre 4 et 8 semaines
The Extended Pan Bar Clamp can be used to position the pan bar away from wider cameras and other obstructions
Middle Section with Toothed Gear
Délai habituel entre 4 et 8 semaines
Lightweight Combo DBL RSR W/SL
Délai habituel entre 4 et 8 semaines
Pivoting aluminum feet for HDT Sport 200 tripods (3 pcs)
30 cm (12 in) length
The Sachtler Front Box Adaptor is a must-have accessory for any filmmaker using the Cine 30 or Cine 50 camera. Designed specifically for mounting the Assistants Front Box, this adaptor is a game changer for those looking for a seamless filming experience.
Délai habituel entre 4 et 8 semaines
Wheels for super wind up with brakes, set of three
Délai habituel entre 4 et 8 semaines
Steel Pipe 50x3x1368 with Holes
Délai habituel entre 4 et 8 semaines
Tripod adapter with euromount 100mm
Assembly Pinion Holder Tube
Délai habituel entre 4 et 8 semaines
Heavy Duty/Medium Duty Integral Spread
Steel Pipe 80x3x1045 with Holes
Délai habituel entre 4 et 8 semaines
Wheel Set 200mm with Brakes
Délai habituel entre 4 et 8 semaines
Tripod Adaptor For Port. Cameras/Camc.
Shoulder Mount Rig with; Power supply from V-mount battery; USB port for LED light and Phone charger; Power Input: V-mount battery plate; Power Output: D-Tap Connector; Phone Charger and Light: USB; Dimension: 351.2 x 70 x 200.5mm
Délai habituel entre 3 et 4 semaines
Wheel
Délai habituel entre 4 et 8 semaines
Counterweight for Third Axis Lambda 50 (1 long rod + 1 short rod + 3 weights)
Steel Pipe 60x3x1365 W/ Holes
Délai habituel entre 4 et 8 semaines
Adds support for an external video capture interface to allow shots to display thumbnails from live video
Steel Pipe 70x3x1202 with Holes
Délai habituel entre 4 et 8 semaines
Adapter of Libec 150 mm heads for P1000 pedestal
Délai habituel entre 2 et 3 semaines
Includes eyepiece leveler rod and 1/4-20 thread adapter.
Geared Column
Délai habituel entre 4 et 8 semaines
29.2 cm (11.5 in) length.
Ball Base adapted for Vision 250
Quickfix / 4-Bolt Flat Base adapted for Vision 250
FB Converter with flat base for fluid heads Video 18/20 SB/Plus on Pedestals and OB tripods (except Pedestal C I)
Délai habituel entre 4 et 8 semaines
Assembly Sleeve
Délai habituel entre 4 et 8 semaines
TP: Euro Mount
30 degree bend, 30 cm (12 in) length, 18 mm (0.7 in) diameter.
Aluminium Telescopic Pan bar plus attachment for Maxima 30 and Lambda 25
Counterweight for Third Axis Lambda 25 (1 rod + 2 weights)
150mm bowl converter for Master Mk2 - Master 30 - Maxima 30 - Maxima 5.0 - SpinHeaD - Lambda 25 - Lambda 50 - Airfloater
30 degree bend, 42 cm (16.5 in) length, 2.54 cm (1 in) diameter
Crank Handle with Hardware
Délai habituel entre 4 et 8 semaines
Eyepiece Holder for Lambda 25
Assembly Pipe
Délai habituel entre 4 et 8 semaines
Stainless Steel Leg & Brace
Délai habituel entre 4 et 8 semaines
30 degree bend, 30 cm (12 in) length, 18 mm (0.7 in) diameter
Tube
Délai habituel entre 4 et 8 semaines
V-mount adapter with connector for powering Libec LX-ePed and LX-ePed Studio electric pedestals.
Délai habituel entre 2 et 3 semaines
Assembly Bearing Set of 100
Délai habituel entre 4 et 8 semaines
Leg Kit Strato Safe
Délai habituel entre 4 et 8 semaines
High hat bowl riser for 150mm bowl
Base with Wheels, without Bush
Délai habituel entre 4 et 8 semaines
Removable Universal Plate Support with support base 3/8" attachment and camera plate AH888
Assembly Clamp
Délai habituel entre 4 et 8 semaines
Assembly Sleeve
Délai habituel entre 4 et 8 semaines
Assembly Sleeve
Délai habituel entre 4 et 8 semaines
Vinten on Euro adapter
Quick-release camera mounting plate for The AJ-D700 camcorder.
Délai habituel 6 semaines
Flat base nut for Maxima 40/" Maxima 40, Maxima 30, Master 30, Master 40, Master MK2, Omega, e-Omega, Master 65 and Magnum Fluid Heads
Wood Telescopic Pan bar plus attachment for Magnum Fluid Head
Short Pan Bar + Attachment - Left for Master 40 - Master 65 - Magnum
Aluminium Telescopic handle plus attachment for Lambda 50 Fluid Head
100mm Ball Base
SHAPE VCT TRIPOD PLATE
Crank Case
Délai habituel entre 4 et 8 semaines
Crank Case
Délai habituel entre 4 et 8 semaines
Base with Wheels, without Bushing
Délai habituel entre 4 et 8 semaines
Steel Pipe 90 x 2.5 x 1040
Délai habituel entre 4 et 8 semaines
set includes 3 rubber feet 75 (ssp12P0150) and one mid-level spreader flowtech (S2054-1001)
Délai habituel entre 4 et 8 semaines
Hi Hat flat base for C40S, Omega, e-Omega, C60S, Spinhead (all versions), Master MK2 and Maxima Fluid Heads
European attachment adapter for Bazooka basket to P90 Pedestal
Hi Hat 150 mm bowl base diameter
Bazooka basket Mitchell flat base
Bazooka basket 150 mm bowl base diamater
Aluminium multi-level Spreader for ENG, EFP and DSLR/UHD Tripods (1 stage only)
Aluminium multi-level Spreader for ENG, EFP and DSLR/UHD Tripods (2 stages only)
Complete 3rd Section For Windup
Délai habituel entre 4 et 8 semaines
Complete 3rd Section For Windup
Délai habituel entre 4 et 8 semaines
set of 3, rubber locking for 100/150 mm tripods (except Cine tripods)
Base with Feet, without Bushing
Délai habituel entre 4 et 8 semaines
150mm bowl converter to a Mitchell flat base for Master MK2 , Master 30 , Maxima, Maxima 30 , Spinhead, Lambda 25 and Airfloater.
Tube
Délai habituel entre 4 et 8 semaines
Plug
Délai habituel entre 4 et 8 semaines
Complete 3rd Section for Windup
Délai habituel entre 4 et 8 semaines
Base with Wheels, without Bush
Délai habituel entre 4 et 8 semaines
Counterweight for Lambda 50 (1 long rod + 2 weights)
Counterweight for Spinhead and Lambda 25 Fluid Nodal Heads (1 rod and 1 weight)
Hi Hat 100 mm bowl base diameter
Flexible - Rubber Ground Spreader for Red Lock SDS- EFP tripods
The CARTONI SDS Smart Deployment Series SMART LOCK mid-level spreader, featuring a patented CARTONI "no-bind" mechanism for quick spread and collapse capability, is a built-in spreader with a unique 2 stage deployment concept.
Assembly Knob Set of 10
Délai habituel entre 4 et 8 semaines
DV C.O.G. plate for fluid heads aktiv8T, FSB 6 T, FSB 8 T, FSB 10 T and DV 2, DV 4, DV 6, DV 8 with front / rear heaviness
Délai habituel entre 4 et 8 semaines
V mount Camera/Tripod adapter plate. (VTA-7 + VPA-10).
Tripod Adapter from ball 150 mm to 3/8"
Attaches the eyepiece leveler EL-3 to Sachtler fluid heads
Removable Universal Plate Support with support base 3/8" attachment and camera plate AH859
Pivoting aluminum feet for STUDIO tripods (3 pcs)
Pivoting aluminum feet for HD tripods (3 pcs)
High hat bowl riser for 75/100mm bowl
The Vct-U14 Allows The Full-Size, Shoulder Mount Professional Camera Or Camcorder To Be Attached To A Tripods Wedge-Plate.
Rubber Telescopic Pan bar plus attachment for Maxima 40/">Maxima 40 & Master 40 Fluid Head
Telescopic Pan Bar + Attachment for Maxima 5.0
20mmSpacer Ring, 4-bolt flat base to 4-bolt flat base
The Vinten Vector Head Pan Bar is for use with the Vector 430i Pan / Tilt Head.
Short Pan Bar & Clamp for for Vector 70, 90, 450, 700 & 950
This is the Vinten 3219-93 Extra Short Pan Bar with Clamp. It is compatible with the 950, 950i, 75, 750 and 750i tripod heads.
Adapter for fluid heads with 100 mm ball on tripods with 150 mm mount
Délai habituel entre 4 et 8 semaines
Adapter of Libec 100 mm heads for P1000 pedestal
Délai habituel entre 2 et 3 semaines
Plate Lock Set of 50
Délai habituel entre 4 et 8 semaines
Black Telescopic Pan Bar & Clamp for Vision 100 & 250
Tripod Mount Plate
Délai habituel entre 2 et 4 semaines
Assembly Ruota
Délai habituel entre 4 et 8 semaines
High hat bowl riser for 100mm bowl
Pedestal Adapter for C20-S 150mm to P70 Plus - P90 pedestals
Pointed screw set (4.Pcs)
BP: Mitchell 1-14 UNS-2B
Telescopic Pan Bar and Clamp suitable for Vision 3AS & 5AS - Black
Extended Camera Mounting Plate complete with 2 x 3/8 Screws for Vision 3AS, 5AS, 8AS, 10AS, 100 & 250
High hat bowl riser for 75mm bowl
BP: Mitchell M24
for OB/Studio Tripod Systems
Délai habituel entre 2 et 8 semaines
Aluminium Telescopic handle for C40S Dutch Head
Microforce Pan Bar for Maxima 5.0 , Maxima 30 and Lambda 25 Head
Hand wheel for Lambda 50 3rd Axis
T-bar for Jibo
Tube
Délai habituel entre 4 et 8 semaines
C.O.G. plate for fluid heads DV 12, Video 15, Video 18, Video 20 and Video 25 Plus with front / rear heaviness
Délai habituel entre 4 et 8 semaines
M.Disc flat base for fluid heads DV(8/100, 10, 12) Video 15-20 III FB and Euro adapter on Quickfix, Video 25 Plus FB,Cine 30 HD, Video 60 / 75 Plus Studio, and flat base heads of other manufactures on Vario/Studio Ped, Ped C III/Combi Ped 1-40
Délai habituel entre 4 et 8 semaines
for ENG/EFP dollies
Short Pan Bar + Attachment - Right for Master 40 - Master 65 - Magnum
Pedestal Adapter 100mm for Focus 18, Focus 22 and C20S Fluid Heads on, P70+, P70 Steering and P90 Pedestals
Pedestal Adapter for Lambda 25, Lambda 50 and Airfloater Fluid Heads on P70+ and P90 Pedestals
Pedestal Adapter for Master MK2, Maxima 40/">Maxima 40, Master 65, and Magnum Fluid Heads on P70+, P70 Steering and P90 Pedestals
Dolly adapter for Focus 12 - Focus 18 - Focus 22 - C20-S to D734/A dolly
Telescopic pan bar DX for e-Cube - e-Cube 7 (w/counterweights 0,500Kg)
Telescopic pan bar SX for e-Cube - e-Cube 7 (w/counterweights 0,500Kg)
Extendable pan handle for QH1 and QH3
Délai habituel entre 2 et 3 semaines
Mitchell Top Plate
Central Column
Délai habituel entre 4 et 8 semaines
Assembly Spigot Set of 10
Délai habituel entre 4 et 8 semaines
Eyepiece holder for Lambda 50 Fluid Head
Adjustable eyepiece holder for Master MK2, Master 30, Master 40 and Maxima 30 Fluid Heads
100mmLevelling Bowl Adaptor with Quickfix ring and 4-bolt flat base
For fluid heads with 100 mm ball on Flat base tripods and Pedestals
Délai habituel entre 4 et 8 semaines
Short pan bar + attachment for Maxima 5.0
Aluminium Short Pan bar plus attachment for Maxima 40/">Maxima 40 Fluid Head
Camera Plate Support for Spinhead Fluid Head
Spring Set of 3
Délai habituel entre 4 et 8 semaines
for V60S & V90S Fluid Heads
Délai habituel entre 2 et 8 semaines
Wide Base for HI OVERHD Stand
Délai habituel entre 4 et 8 semaines
Eyepiece Holder for C20-S
150mm half ball 3/8" screw with long locking handle
120 mm European plate with two 3/8 - 16 screws (08274).
Adapter 75/100 aktiv for aktiv6, aktiv8, aktiv8T on Sachtler tripods with 100 mm bowl
Délai habituel entre 4 et 8 semaines
Telescopic Pan Bar PB-4 (set of 2) for DV6P, V10, V10P, V12, V15P & V20S Tripod Systems
Délai habituel entre 2 et 8 semaines
for V20P, V25P & V35P Tripod Systems
Délai habituel entre 2 et 8 semaines
for V60S EFP, V60S, V90S & OB/Studio Tripod Systems
Délai habituel entre 2 et 8 semaines
Flat Base Adapter for 75mm/100mm Bowl Tripods
Délai habituel entre 2 et 3 semaines
Flat Base Adapter for 100mm Bowl Tripods
Délai habituel entre 2 et 3 semaines
Ball Head EMH494-BH1
Délai habituel entre 4 et 8 semaines
Aluminium Telescopic Pan bar for C20S Dutch Head
Aluminium Telescopic Pan bar plus attachment for Lambda 10 Nodal Head
Aluminium Telescopic right pan bar plus attachment C20S
Curved Telescopic Pan Bar + Attachment (for Microforce Digital control) for Maxima 30
Dovetail Camera plate for Master 40, Omega, e-Omega and Magnum Fluid Heads (with two 3/8" screws)
Adapter for JibO to flat/Mitchell base tripods
150mm adapter for JibO to 150mm bowl base base tripods
Ground spreader for Red Lock tripods - (Ball foot coupling)
Center spider FT 75 for tripod flowtech 75
Center spider FT 75 for tripod flowtech 75
Délai habituel entre 4 et 8 semaines
This 3iSpuds Feet for 3iSpreader Set from Manfrotto includes thee spare or replacement rubber feet for the 3iSpreader tripod dolly. Each foot has a metal collar and rubber tip.
Délai habituel entre 4 et 6 semaines
150mm half ball with 3/8" screw with short locking handle
BP: Euro Mount
Tube
Délai habituel entre 4 et 8 semaines
Osprey Lite Tracking Skid Adaptor
Wedge plate 45 grade wedge plate
Tripod Mount Plate for HDL-F30
Délai habituel entre 2 et 4 semaines
80 mm European plate with one 3/8 -16 (08274) and one 1/4 -20 screw (08330).
Pointed screw set (3.Pcs)
Telescopic Pan Bar + Attachment - Left - for C20-S
Recommended for fluid heads Video 60 Plus Studio, Video 75 Plus and Video 90
Délai habituel entre 4 et 8 semaines
Pedestal accessory holder
Quickfix ring to fit 4-bolt flat base head
Tube
Délai habituel entre 4 et 8 semaines
Floor spreader for T150B and T150C
Délai habituel entre 2 et 3 semaines
Foot ring for P50, P50/OB and P70 Pedestals
camera base plate/ euromount
Recommended for DV 12
Délai habituel entre 4 et 8 semaines
Adaptor to mount an aktiv 100 mm head onto a C I or C III pedestal
Délai habituel entre 4 et 8 semaines
Cable protection for Alphatron Pedestal
150 mm Ball Tiedown for 150 mm Base 08414
Solid ball head for compacts, CSC, DSLR, video cameras/camcorders
Vinten quick fix adapter disc (4 bolts)
Short Pan Bar + Attachment for Maxima 30 - Lambda 25
Monitor bracket for Master 30 - Maxima 30 - Master 40 - Maxima 5.0 - Master 65 - Magnum
Additional fixed length Pan Bar and Clamp, suitable for Vision 3AS & 5AS - Black
The Vinten 3219-101 Fixed Length Pan Bar is a lightweight (0.4 lbs, 0.2 kg) black bar used for smooth movement of pan and tilt fluid heads.
Adaptor 75/100 FSB Mk II for FSB Mk II heads with 75 mm ball on Sachtler tripods with 100 mm bowl
Délai habituel entre 4 et 8 semaines
Mitchell Tiedown for Mitchell base 08281
Adapter for fluid heads with 75 mm ball on tripods with 100 mm mount
Délai habituel entre 4 et 8 semaines
APS flat wall mounted target in black.
Cable management including 24V power and ethernet cables, per metre
APS flat wall mounted target preassembled less colour filter. Enables the target to be colour coded to suit studio/application. Customer to supply own colour filter.
Camgear Elite Telescopic Pan Bar for Elite 18, Elite 20 & Elite 25 Fluid Heads / Tripod Systems
Délai habituel entre 2 et 8 semaines
V-mount tripod plate w/ quick-release mechanism
Délai habituel entre 2 et 8 semaines
Adapter for Total Dutch (connection to camera plate)
Wooden platform for rostrum (100x100cm)
EFP Quickfit Wedge incl. 2 x 3/8 screws
Baseplate for Mitchell mount
Spring Set of 3
Délai habituel entre 4 et 8 semaines
Camgear Elite Telescopic Pan Bar for Elite 8, Elite 10, Elite 12 & Elite 15 Fluid Heads / Tripod Systems
Délai habituel entre 2 et 8 semaines
Sand Bag, Empty Set of 3, Black-15-pounds
Délai habituel entre 8 à 10 semaines
Aluminium Telescopic Pan bar plus attachment for Focus 18, Focus 22 and e-Sensor Fluid Heads
This contoured grip is designed for use with compatible X-series cameras and quickly attaches to the camera's tripod thread.
Adaptor to mount an aktiv 75 mm head onto a C I or C III pedestal
Délai habituel entre 4 et 8 semaines