Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
Professional studio swivel arm
3 pièce (s) en stock
Rechargeable battery pack for evolution wireless D1 SKM handheld transmitters.
13 pièce (s) en stock
Rechargeable battery pack for evolution wireless D1 SK bodypack transmitters.
20 pièce (s) en stock
Rechargeable battery pack for Evo G2/G3/Serie2000
29 pièce (s) en stock
Dc Power Cord, 6Ft, Vr Field, Stripped & Tinned
1 pièce (s) en stock
Turn your Wireless GO Transmitter into a handheld microphone with the RODE Interview GO. Once the transmitter is slotted snugly into the Wireless GO's cradle, the adapter will give you the sound and appearance of a handheld microphone.
4 pièce (s) en stock
Camera mounting adapter for EK100G3 or EK2000
12 pièce (s) en stock
Battery Case For Utx-B03, Ztx-B01 And Ztx-B02Rc
1 pièce (s) en stock
MobileConnect station with (2) Dante interfaces and PoE power supply
The RM-WAP-16 Wireless Access Point for up to 16 Microphones from Yamaha doubles the capacity of the previous RM-WAP-8, which supported up to 8 wireless mics.
The AC 3200-II is an active 8-channel transmitter combiner for bundling the antenna signals in large wireless monitoring systems. Designed for the 2000 Series rack-mount monitor transmitters, it is ideal for large productions where reliable transmission and long reach are key. The AC 3200-II allows up to eight signals to be transmitted from a single antenna.
2 x 4: 1 antenna combiner compatible with all Sennheiser analogue and digital wireless fixed receivers. Includes (1) ACA 3 active antenna combiner and (3) power cables (EU, UK, US)
Add up to eight RM series wireless microphones to your ADECIA conferencing system with the RM-WAP-8 Wireless Access Point from Yamaha. The unit connects to your Dante network via an RJ45 port, which also supplies the unit with PoE (Power over Ethernet), and allows you to quickly and easily configure your mics using the automated setup wizard.
Active wideband antenna splitter for up to 16 channels (8 dual receivers), may be made narrowband with optional IM3000 selective RF input modules - cables not included
Active, intelligent, directional antenna. Frequency ranges 630 MHz to 798 MHz, 4.6 dBi
Active, intelligent, omni-directional antenna. Frequency ranges B1-B8: 630 MHz to 798 MHz, 3.2 dBi
The d:fine Core 6066 Subminiature Headset Microphone from DPA is a lightweight, one-size-fits-all headset, minimized size omnidirectional microphone (0.12"), and cable that is terminated with a hardwired 3.5mm locking connector.
The capsule of the d: fine CORE 6066 subminiature headband is only 3 mm in diameter, but is as powerful as the larger, award-winning DPA microphones. Despite its small size, it impresses with clarity, consistent performance and robustnes.
The capsule of the d: fine CORE 6066 subminiature headband is only 3 mm in diameter, but is as powerful as the larger, award-winning DPA microphones. Despite its small size, it impresses with clarity, consistent performance and robustness.
The d:fine Core 6066 Subminiature Headset Microphone from DPA is a lightweight, one-size-fits-all headset, minimized size omnidirectional microphone (0.12"), and cable that is terminated with a hardwired 3.5mm locking connector.
The d:fine Core 6066 Subminiature Headset Microphone from DPA is a lightweight, one-size-fits-all headset, minimized size omnidirectional microphone (0.12"), and cable that is terminated with a hardwired TA4F connector.
The headset can be used with wireless microphone systems (sold separately) to capture audio for live stage, theater, presentation, and rehearsal applications.
Despite its small size, it is offered to pack the audio power of larger DPA mics. The headset can be used with wireless microphone systems (sold separately) to capture audio for live stage, theater, presentation, and rehearsal applications.
The d:fine Core 6066 Subminiature Headset Microphone from DPA is a lightweight, one-size-fits-all headset, minimized size omnidirectional microphone (0.12"), and cable that is terminated with a hardwired 3-pin LEMO connector.
6066 CORE Omni Headset Microphone, Brown, 3 Pin LEMO
Passive Circulary Polarized UHF Wide-Band Antenna for Wireless Microphones and Monitor Systems (450 - 960MHz)
Active, intelligent antenna booster. Frequency ranges B1-B8: 630 MHz to 798 MHz
The AD 3700 Active Directional Antenna from Sennheiser features an integrated AB 3700 booster, and has a front-to-back ratio of >= 14 dB.
Omnidirectional antenna with integrated AB3700 for EM3731/3732 series and EM2000/2050 receivers only.
6066 Core Omni Headset Mic, Microdot (Brown)
The d:fine Core 6066 Subminiature Headset Microphone from DPA is a lightweight, one-size-fits-all headset, minimized size omnidirectional microphone (0.12"), and cable that is terminated with a hardwired MicroDot connector.
The d:fine Core 6066 Subminiature Headset Microphone from DPA is a lightweight, one-size-fits-all headset, minimized size omnidirectional microphone (0.12"), and cable that is terminated with a hardwired MicroDot connector.
4-way passive True Diversity antenna splitter / combination for SpeechLine Digital Wireless system. 2 RF inputs and 8 RF outputs, DECT range (1880 - 1930 MHz)
Active antenna combination with DC electric distribution for IEM transmitter. Includes (1) 3-1-EU NT power supply and (4) BNC cables
The CHG 4N is a network enabled charger featuring four indiviual charging bays.
The beige d:fine Core 4088 Directional Miniature Mic Boom with TA4F Connector from DPA is a replacement cardioid microphone boom with cable for the d:fine headset (sold separately).
The brown d:fine Core 4088 Directional Miniature Mic Boom with 3-Pin LEMO Connector from DPA is a replacement cardioid microphone boom with cable for the d:fine headset (sold separately).
The brown d:fine Core 4088 Directional Miniature Mic Boom with TA4F Connector from DPA is a replacement cardioid microphone boom with cable for the d:fine headset (sold separately).
The brown d:fine Core 4088 Directional Miniature Mic Boom with 3.5 Locking Connector from DPA is a replacement cardioid microphone boom with cable for the d:fine headset (sold separately).
The beige d:fine Core 4088 Directional Miniature Mic Boom with 3-Pin LEMO Connector from DPA is a replacement cardioid microphone boom with cable for the d:fine headset (sold separately).
The black d:fine Core 4088 Directional Miniature Mic Boom with 3.5 Locking Connector from DPA is a replacement cardioid microphone boom with cable for the d:fine headset (sold separately).
The black d:fine Core 4088 Directional Miniature Mic Boom with 3-Pin LEMO Connector from DPA is a replacement cardioid microphone boom with cable for the d:fine headset (sold separately).
The black d:fine Core 4088 Directional Miniature Mic Boom with TA4F Connector from DPA is a replacement cardioid microphone boom with cable for the d:fine headset (sold separately).
The beige d:fine Core 4088 Directional Miniature Mic Boom with 3.5 Locking Connector from DPA is a replacement cardioid microphone boom with cable for the d:fine headset (sold separately).
The MMB4088 Miniature Microphone Boom is for use with AHM60 Adjustable Headset Mount. Combined, the boom and mount comprise the headband part of a d:fine 4088 Headset Microphone.
The MMB4088 Miniature Microphone Boom is for use with AHM60 Adjustable Headset Mount. Combined, the boom and mount comprise the headband part of a d:fine 4088 Headset Microphone.
Cradle for A10-RX with 15pin D-type adapter. For use with Sony camcorders that have slot-in for wireless, or Sony extension units with slot-in for wireless. The A-15PIN allows the A10-RX to be used in the Sony slot without the need for external cables. The audio is passed through the internal slot as a 2 channel AES input. When connected to the camcorder...
The MMB4066 Miniature Microphone Boom is for use with AHM60 Adjustable Headset Mount. Combined, the boom and mount comprise the headband parts of ad: fine 4066 Headset Microphone.
The MMB4066 Miniature Microphone Boom is for use with AHM60 Adjustable Headset Mount. Combined, the boom and mount comprise the headband parts of a d:fine 4066 Headset Microphone.
The black d:fine Core 4066 Omnidirectional Miniature Mic Boom with 3-Pin LEMO Connector from DPA is a replacement microphone boom with cable for the d:fine headset (sold separately).
The black d:fine Core 4066 Omnidirectional Miniature Mic Boom with 3.5mm Locking Connector from DPA is a replacement microphone boom with cable for the d:fine headset (sold separately).
The black d:fine Core 4066 Omnidirectional Miniature Mic Boom with TA4F Connector from DPA is a replacement microphone boom with cable for the d:fine headset (sold separately).
The brown d:fine Core 4066 Omnidirectional Miniature Mic Boom with 3.5mm Locking Connector from DPA is a replacement microphone boom with cable for the d:fine headset (sold separately).
The brown d:fine Core 4066 Omnidirectional Miniature Mic Boom with TA4F Connector from DPA is a replacement microphone boom with cable for the d:fine headset (sold separately).
The MMB4066 Miniature Microphone Boom is for use with AHM60 Adjustable Headset Mount. Combined, the boom and mount comprise the headband parts of a d:fine 4066 Headset Microphone.
The brown d:fine Core 4066 Omnidirectional Miniature Mic Boom with 3-Pin LEMO Connector from DPA is a replacement microphone boom with cable for the d:fine headset (sold separately).
The black DPA Omni Mic Boom for Core 6066 Subminiature Headset is offered as a replacement part should the original included with the headset get lost or damaged.
Microphone boom (gallows) for d: fine CORE 6066 subminiature headsets
The MMB4066 Miniature Microphone Boom is for use with AHM60 Adjustable Headset Mount. Combined, the boom and mount comprise the headband parts of a d:fine 4066 Headset Microphone.
Active antenna splitter (dual 1:4) with DC power distribution for EW-D receivers. Includes (1) NT 12-35 CS power supply and (8) BNC cables, X-Y range (1350 - 1805 MHz)
Active antenna splitter (dual 1:4) with DC power distribution for EW-D receivers. Includes (1) NT 12-35 CS power supply and (8) BNC cables, UHF range (470 - 706 MHz)
Active antenna splitter (dual 1:4) with DC power distribution for EW-D receivers. Includes (1) NT 12-35 CS power supply and (8) BNC cables, UHF range (470 - 694 MHz)
The brown d:fine Core 4088 Directional Miniature Mic Boom with Microdot Connector from DPA is a replacement cardioid microphone boom with cable for the d:fine headset (sold separately).
The black d:fine Core 4088 Directional Miniature Mic Boom with Microdot Connector from DPA is a replacement cardioid microphone boom with cable for the d:fine headset (sold separately).
The beige d:fine Core 4088 Directional Miniature Mic Boom with Microdot Connector from DPA is a replacement cardioid microphone boom with cable for the d:fine headset (sold separately).
Adapter for A10/A20-RX with panel mount TA3 audio outs (analog or AES), 4-pin Hirose or TA4 DC power in, and USB-C for firmware updates.
Délai de livraison habituel 4 semaines
Monitor any A10 transmitter on set with this handy belt-worn headphone amp for your A10-RX.
This boom is part of the modular d: fine 4288 Directional (cardioid) headset microphone. For discreet placement, the microphone boom can be bent slightly so that the capsule is as close to the cheek as possible.
This boom is part of the modular d: fine 4188 Slim Directional (cardioid) headset microphone.
This boom is part of the modular d: fine 4188 Slim Directional (cardioid) headset microphone.
This boom is part of the modular d: fine 4188 Slim Directional (cardioid) headset microphone.
This boom is part of the modular d: fine 4188 Slim Directional (cardioid) headset microphone.
This boom is part of the modular d: fine 4288 Directional (cardioid) headset microphone. For discreet placement, the microphone boom can be bent slightly so that the capsule is as close to the cheek as possible.
This boom is part of the modular d: fine 4288 Directional (cardioid) headset microphone. For discreet placement, the microphone boom can be bent slightly so that the capsule is as close to the cheek as possible.
This boom is part of the modular d: fine 4288 Directional (cardioid) headset microphone. For discreet placement, the microphone boom can be bent slightly so that the capsule is as close to the cheek as possible.
This boom is part of the modular d: fine 4288 Directional (cardioid) headset microphone. For discreet placement, the microphone boom can be bent slightly so that the capsule is as close to the cheek as possible.
This boom is part of the modular d: fine 4188 Slim Directional (cardioid) headset microphone.
This boom is part of the modular d: fine 4288 Directional (cardioid) headset microphone. For discreet placement, the microphone boom can be bent slightly so that the capsule is as close to the cheek as possible.
This boom is part of the modular d: fine 4188 Slim Directional (cardioid) headset microphone.
The brown d:fine Core 4066 Omnidirectional Miniature Mic Boom with Microdot Connector from DPA is a replacement microphone boom with cable for the d:fine headset (sold separately).
25 Pin D-Type Uni-/Superslot adapter for the A10-RX. Includes A-PLATE
This boom is part of the modular d: fine 4166 Slim Omnidirectional (Ball) Headset Microphone. The directional characteristic of the microphone is marked on the flat microphone head with an O for omnidirectional (sphere). This marking should always point towards the mouth.
This boom is part of the modular d: fine 4266 Omnidirectional (omnidirectional) headset microphone. The directional characteristic of the microphone is marked on the flat microphone head with an O for omnidirectional (sphere). This marking should always point towards the mouth.
This boom is part of the modular d: fine 4166 Slim Omnidirectional (Ball) Headset Microphone. The directional characteristic of the microphone is marked on the flat microphone head with an O for omnidirectional (sphere). This marking should always point towards the mouth.
This boom is part of the modular d: fine 4166 Slim Omnidirectional (Ball) Headset Microphone. The directional characteristic of the microphone is marked on the flat microphone head with an O for omnidirectional (sphere). This marking should always point towards the mouth.
This boom is part of the modular d: fine 4166 Slim Omnidirectional (Ball) Headset Microphone. The directional characteristic of the microphone is marked on the flat microphone head with an O for omnidirectional (sphere). This marking should always point towards the mouth.
This boom is part of the modular d: fine 4166 Slim Omnidirectional (Ball) Headset Microphone. The directional characteristic of the microphone is marked on the flat microphone head with an O for omnidirectional (sphere). This marking should always point towards the mouth.
This boom is part of the modular d: fine 4166 Slim Omnidirectional (Ball) Headset Microphone. The directional characteristic of the microphone is marked on the flat microphone head with an O for omnidirectional (sphere). This marking should always point towards the mouth.
This boom is part of the modular d: fine 4166 Slim Omnidirectional (Ball) Headset Microphone. The directional characteristic of the microphone is marked on the flat microphone head with an O for omnidirectional (sphere). This marking should always point towards the mouth.
This boom is part of the modular d: fine 4166 Slim Omnidirectional (Ball) Headset Microphone. The directional characteristic of the microphone is marked on the flat microphone head with an O for omnidirectional (sphere). This marking should always point towards the mouth.
This boom is part of the modular d: fine 4266 Omnidirectional (omnidirectional) headset microphone. The directional characteristic of the microphone is marked on the flat microphone head with an O for omnidirectional (sphere). This marking should always point towards the mouth.
This boom is part of the modular d: fine 4166 Slim Omnidirectional (Ball) Headset Microphone. The directional characteristic of the microphone is marked on the flat microphone head with an O for omnidirectional (sphere). This marking should always point towards the mouth.
This boom is part of the modular d: fine 4266 Omnidirectional (omnidirectional) headset microphone. The directional characteristic of the microphone is marked on the flat microphone head with an O for omnidirectional (sphere). This marking should always point towards the mouth.
This boom is part of the modular d: fine 4266 Omnidirectional (omnidirectional) headset microphone.
This boom is part of the modular d: fine 4266 Omnidirectional (omnidirectional) headset microphone.
This boom is part of the modular d: fine 4266 Omnidirectional (omnidirectional) headset microphone. The directional characteristic of the microphone is marked on the flat microphone head with an O for omnidirectional (sphere). This marking should always point towards the mouth.
The black d:fine Core 4066 Omnidirectional Miniature Mic Boom with Microdot Connector from DPA is a replacement microphone boom with cable for the d:fine headset (sold separately).
The beige d:fine Core 4066 Omnidirectional Miniature Mic Boom with Microdot Connector from DPA is a replacement microphone boom with cable for the d:fine headset (sold separately).
The Sennheiser SL PASC 2 is a passive, two-channel true diversity antenna splitter/combiner for the SpeechLine Digital Wireless microphone series.
XLR adapter for A10?RX receiver conversion
Best sound but also ease of use were the design criteria for the new DIGITAL 9000 series microphone heads. Handling noise and pop sensitivity of a capsule can make the work of the sound engineer a tough one.
Broadband antenna booster for EM3731/3732 series and EM2000/2050 receivers only.
Microphone Head, Permanently Polarized Condenser - Super Cardioid
Microphone Head, Permanently Polarized Condenser - Cardioid
Dynamic microphone capsule for SKM 5200, grey
Plug-on transmitter with phantom power, frequency range: BW (626 - 698 MHz)
Dynamic microphone capsule for SKM 5200, black
The Sennheiser MMK 965-1 Condenser Module (Black) is a large diaphragm capsule for use with ew G3 and 2000 series handheld transmitters. This double-diaphragm capsule can switch between cardioid and super-cardioid pick-up patterns for natural sounds in various stage situations.
Microphone module for wireless system (dynamic, high rejection super cardioid). Comes with (5) anti-pop foam and (1) pouch.
Microphone module for wireless system (dynamic, high rejection super cardioid). Comes with (5) anti-pop foam and (1) pouch.
The Sennheiser MMK 965-1 Condenser Module (Nickel) is a large diaphragm capsule for use with ew G3 and 2000 series handheld transmitters. This double-diaphragm capsule can switch between cardioid and super-cardioid pick-up patterns for natural sounds in various stage situations.
Passive external directional antenna. UHF transmission greatly enhances range, reliability and scalability. Built-in 3/8" and 5/8" threads allow for easy mic stand mounting
Double charger for SL HANDHELD and SL BODY PACK, IPv4/6 network compatible, supplied with power supply
The A20-Shelf is a 1RU, 19 rack shelf designed to accommodate two A20-Nexus receivers or one A20-Nexus and one PowerStation-8M side by side.
Délai de livraison habituel 4 semaines
The Deity BF1 Butterfly Antenna is a must-have for film sets and stage applications using wireless microphone systems. This unique antenna boasts a number of impressive features that make it stand out from the rest.
The STA-1 is a high quality, miniature wall and surface mount, dual-channel audio electronic line transformer and amplifier, designed for use in situations where balanced/unbalanced configuration conversion and level boost are required.
Back Panel adapter
The A20-Monarch is an omnidirectional, wide-bandwidth (470-1525 MHz) antenna. It provides uniform coverage and gain across the exceptionally wide SpectraBand tuning range of the Sound Devices Astral series wireless products.
Délai de livraison habituel 4 semaines
The ASP 113 3-Way Passive Antenna Splitter from Sennheiser splits a signal into 3 parts. This splitter is DC-coupled for use with antenna boosters.
Passive Antenna Splitter, 1 x 1 into 4
Passive Antenna Splitter, 2 x 1 into 2
Battery Charger for 2x BA 60 / BA 61
Plug-on transmitter for dynamic microphones (without phantom power), frequency range: B (626 - 668 MHz)
The Sennheiser A 2003-UHF Wide-Band Directional Antenna enhances transmission and reception for wireless microphone and monitoring systems.
Mounting plate only for A10-RX-SL receiver. Includes plate only.
The Sony ECM-W2BT brings vloggers, YouTubers, journalists, and content creators using Sony cameras with digital MI interfaces a flexible and easy-to-use true-wireless microphone system featuring advanced Bluetooth technology for high-quality audio and reliable, low-latency performance.
Passive directional antenna for 1800 MHz range
Microphone capsule, condenser, super-cardioid, for SKM 100/300/500/2000 and SKM 9000, black
Unobstrusive antenna for wall and tripod mounting for SL DW
Timecode cable, 5-pin LEMO to 3-pin LEMO
The beige Microphone Cable for Refine Headset, S2 to 3-Pin LEMO Connector from DPA is a 4.3' cable in length. It can be used with the d:fine Refine headset (sold separately) for compatible wireless transmitters or as a replacement cable.
The black Microphone Cable for Refine Headset, S2 to 3-Pin LEMO Connector from DPA is a 4.3' cable in length. It can be used with the d:fine Refine headset (sold separately) for compatible wireless transmitters or as a replacement cable.
The beige Microphone Cable for Refine Headset, S2 to 3.5mm Connector from DPA is a 4.3' cable in length. It can be used with the d:fine Refine headset (sold separately) for compatible wireless transmitters or as a replacement cable.
The black Microphone Cable for Refine Headset, S2 to TA4F Connector from DPA is a 4.3' cable in length. It can be used with the d:fine Refine headset (sold separately) for compatible wireless transmitters or as a replacement cable. The screw-on connector easily attaches to the headset.
The black Microphone Cable for Refine Headset, S2 to 3.5mm Connector from DPA is a 4.3' cable in length. It can be used with the d:fine Refine headset (sold separately) for compatible wireless transmitters or as a replacement cable.
Microphone cable for the d: fine headset microphone series. (4166/4266, 4188/4288)
Microphone cable for the d: fine headset microphone series. (4166/4266, 4188/4288)
The beige Microphone Cable for Refine Headset, S2 to TA4F Connector from DPA is a 4.3' cable in length. It can be used with the d:fine Refine headset (sold separately) for compatible wireless transmitters or as a replacement cable.
A20-Mini Dual Battery Adapter for Extended Run Time Double the battery run time of your A20-Mini.
Délai de livraison habituel 4 semaines
The AB 4-BW+ Antenna Booster from Sennheiser is an updated version of the AB 3 antenna booster. It is designed to accommodate the wider switching bandwidth of the evolution wireless G4 system.
Antenna booster, 10 dB gain, BNC connectors, frequency range: S (606 - 694 MHz)
Balanced 3-pin XLR female to 3-pin LEMO, incl. improved RFI filter
Hanging system for Guidport receiver, black. A pack of 50 pieces
The gold d:facto II Outer Grid and Complete Assembly for Handheld Vocal Microphone from DPA comes with a windscreen and pop filter assembly.
The d:facto II Outer Grid and Complete Assembly for Handheld Vocal Microphone from DPA comes with a windscreen and pop filter assembly.
The nickel d:facto II Outer Grid and Complete Assembly for Handheld Vocal Microphone from DPA comes with a windscreen and pop filter assembly.
Microphone module, dynamic, omnidirectional pattern
Passiv-UHF-Antenna
Designed for use with evolution wireless handheld transmitters, the cardioid MMD 945 microphone head features the excellent acoustic properties of the wired e 945 vocal microphon
Designed for use with evolution wireless handheld transmitters, the cardioid MMD 935 microphone head features the excellent acoustic properties of the wired e 935 vocal microphone.
This easy-to-install adjustable antenna bracket is perfect for when the A20-Nexus is used in a bag, and allows the 2.4 GHz antenna to be mounted on either side panel towards the front of the A20-Nexus, extending the 2.4 GHz antenna out of the top of the bag for better NexLink range.
Délai de livraison habituel 4 semaines
The DPA AHM6001-S is a lightweight, low profile headband that supports the DPA 4066, 4067 and 4088 miniature microphones.
Timecode cable, BNC to 3?pin LEMO
The DPA AHM6000-L is a lightweight, low profile headband that supports the DPA 4066, 4067 and 4088 miniature microphones.
The DPA AHM6000-S is a lightweight, low profile headband that supports the DPA 4066, 4067 and 4088 miniature microphones.
The DPA AHM6001-L is a lightweight, low profile headband that supports the DPA 4066, 4067 and 4088 miniature microphones.
Right-angle RF filter circuit board. Fits Cable Techniques low profile XLR. Pack of 4
SuperSlot adapter
The DPA Microphones DUA0574 Pop Screens are sold in a set of 5, and are intended for use with the DPA 4088 miniature headworn microphone.
The DPA Microphones DUA0575 Pop Screens are sold in a set of 5, and are intended for use with the DPA 4088 miniature headworn microphone.
Pop protection for d: fine 4088/88 headset microphones.
Rechargeable pack for SKM 9000
Rechargeable pack for SKM 9000
The beige MAHM6000-F Multi-Adjustable Headset Mount from DPA is a lightweight headset mount for the DPA Refine headset or earset microphone (sold separately). It can be used to replace the original headset mount and offers a secure and comfortable fit.
Accessory plate for mounting the A10-TX onto microphone boom poles with 3/8 inch thread top screw
The DPA DAK4060 is a complete accessory kit with room for a Miniature Microphone, and one or more connection adapters that's packed in a rugged case with a transparent lid, so the user can make sure he has a complete kit without opening the box all the time.
The black MAHM6000-B Multi-Adjustable Headset Mount from DPA is a lightweight headset mount for the DPA Refine headset or earset microphone (sold separately).
VESA mounting kit for Ceiling Mic
2 Batterypack for SKM 9000
Battery pack for all SKM5200 and SKM5000 variants, requires (2) AA batteries, operates SKM5200 transmitters for 7.5 hours (Hi power) - 13 hours (Lo power)
3 Batterypack for SKM 9000
Mic Cable for Earhook Slide, Brown, MicroDot for d: fine Flex Headset (4188, 4288, 4166, 4266)
Microphone cable for the d: fine headset microphone series. (4166/4266, 4188/4288)
The black, 4.2' CH16B00 Microphone Cable for Earhook Slide from DPA Microphones comes with a MicroDot connector and easily attaches to the earhook for the d:fine headset microphones.
The DAD4099-BC Micro-Dot to XLR with Belt Clip and Low Cut filter by DPA Microphones features an 80 Hz low-cut roll-off filter and provides a balanced output signal for the DPA 4099 Instrument microphone. A belt clip is included.
The beige Microphone Cable for Refine Headset, S2 to MicroDot Connector from DPA is a 4.3' cable in length. It can be used with the d:fine Refine headset (sold separately) for compatible wireless transmitters or as a replacement cable.
The black Microphone Cable for Refine Headset, S2 to MicroDot Connector from DPA is a 4.3' cable in length. It can be used with the d:fine Refine headset (sold separately) for compatible wireless transmitters or as a replacement cable.
Universal wireless receiver mounting kit - side and/or rear mount
Mount kit for mounting the Remote Conference Processor "RM-CR" in a rack.
This easy-to-assemble Belt Clip & Holster from Sound Devices is compatible with the A20-Mini Digital Wireless Bodypack Transmitter and Recorder. It secures the transmitter in place using hook-and-loop fastener strips and attaches the transmitter to the talent's garments.
Délai de livraison habituel 4 semaines
The TX-10B Bridging Input Transformer is a device that can be used to add transformer isolation to any line-level RDL product input. It provides 10K Ohm input bridges on any audio line. It also includes both balanced input and output.
Dynamic Mic Capsule for Sennheiser SKM2000 Handheld Wireless Systems.
15-Pin D-Sub adapter
25-Pin Sub-D adaptateur
Elastic suspension with open ring - allows the MK 4 to be positioned close to the sound source and prevents vibration.
These are lapel and headworn microphones for use with the G3 series of belt-pack transmitters and capsules for the G3 handheld transmitters.
Extension brackets for Ceiling Mic
The double ear hook for d: fine dual-ear headset microphones can be adapted to all ear and head sizes.
The double ear hook for d: fine dual-ear headset microphones can be adapted to all ear and head sizes.
The double ear hook for d: fine dual-ear headset microphones can be adapted to all ear and head sizes.
The double ear hook for d: fine dual-ear headset microphones can be adapted to all ear and head sizes.
The double ear hook for d: fine dual-ear headset microphones can be adapted to all ear and head sizes.
The TX-1A Balanced to Unbalanced Transformer (Adjustable) is a device that can be used to add transformer isolation between a balanced line and an unbalanced input. The input can be 10K Ohm bridging or 600 Ohm terminated. Level output can be adjusted from 4 to 24dB below the input level.
Remote button for the mute function on the SK 300 G3 transmitter
DC-Adapter to SK/EK100-500 G2/G3
Belt Clip for A10?TX
Antenna right-angled black with nickel plated SMA connector
The DPA DUA6004 grid provides a 10dB soft boost around 12kHz when mounted onto DPA miniature series microphones
Makeup and moisture filters for d: fine slim headset microphones. The filter is pre-mounted on all d: fine Slim Headset Microphones.
Miniature Grid, Soft Boost for d:screet Miniature 4060 Series and d:fine 4066/4266 Headset Microphones.
Miniature Grid, High Boost for d:screet Miniature 4060 Series and d:fine 4066/4266 Headset Microphones.
Miniature Grid, Soft Boost for d:screet Miniature 4060 Series and d:fine 4066/4266 Headset Microphones.
The DPA Microphones KE4099-4 Replacement Single Zip Case is designed for use with d:vote 4099 Microphone.
Makeup and moisture filters for d: fine slim headset microphones. The filter is pre-mounted on all d: fine Slim Headset Microphones.
The black Zip Case for d:fine Headset Microphones from DPA is a travel and storage case that includes a mirror to enable you to check that the headset is mounted correctly before you perform.
Makeup and moisture filters for d: fine slim headset microphones. The filter is pre-mounted on all d: fine Slim Headset Microphones.
Miniature Grid, High Boost for d:screet Miniature 4060 Series and d:fine 4066/4266 Headset Microphones.
This case contains a mirror that gives you the opportunity to check whether the headset has been installed correctly.
This case contains a mirror that gives you the opportunity to check whether the headset has been installed correctly.
Antenna straight black with nickel plated SMA connector
Miniature Grid, High Boost for d:screet Miniature 4060 Series and d:fine 4066/4266 Headset Microphones.
Miniature Grid, Soft Boost for d:screet Miniature 4060 Series and d:fine 4066/4266 Headset Microphones.
Miniature Grid, Soft Boost for d:screet Miniature 4060 Series and d:fine 4066/4266 Headset Microphones.
Originally manufactured as toupe tape, this double-sided adhesive is durable and adhesive enough for most mounting applications.
Universal wireless receiver side mounting plate only
A set of two replacement 2.4 GHz SMA-M antennas for the A20-Nexus, these antennas are used for NexLink and can be connected to the dual SMA-F ports on the A20-Nexus rear panel. The antennas can also be remotely mounted using the mounting hardware included with the A20-Nexus.
Délai de livraison habituel 4 semaines
Adds improved RF immunity for bal. mics/cables, specifically when connected to digital wireless transm. like the A10-TX.
The Sound Devices USB-C-CAP is a set of five durable rubber caps designed to fit on the USB Type-C socket of a Sound Devices A20-Mini digital wireless transmitter. With a rubber cap covering the transmitter's USB Type-C port, the device's resistance to ingress of dust and moisture is enhanced.
Délai de livraison habituel 4 semaines
Detachable antenna for SK 6212, SK 6000 and SK 9000, frequency range: (630-718 MHz)
Detachable rigid antenna for SK 6212, frequency range: (630-718 MHz)
The Sennheiser EW-D COLOR CODING SET bundles three packs of 16 color-coded indicators that magnetically attach on EW-D EM receivers, EW-D SK bodypack transmitters, and EW-D SKM handheld transmitters.
Detachable antenna for SK 6000 and SK 9000, frequency range: (630-718 MHz)
Adapts Microdot to TA4F, beige.
DA5S Microdot Adapter for W.Lav
The microdot system benefits sound professionals, ENG Camera ops, hotels, and houses of worship who may own or work with multiple types of wireless kits on a regular basis. Microdot connectors also reduce the cost of changing wireless microphone models/brands as you upgrade your gear.
SPD-HR12V (4-Pin Hirose to 12v regulated Hirose)
Converts 48V to Plug-In Power For Passive Microphones
Ear part for VT901
Délai de livraison habituel 4 semaines
Microphone drum clamp for attaching the e 604 (or earlier BF/MD 504) and the e 904 to a drum.
Adapts Microdot to 3.5mm jack, black.
The Deity Microphones RX-Link is a low profile 90 degree angled XLR to 90 degree angled locking TRS cable. Tailor made for wireless receivers placed in location audio bags, or for receivers placed on cameras with XLR inputs. The RX-Link cable is 40 cm long and weighs 29 gram.
Made of soft and comfortable fabric, and featuring a belt loop and a clip, the black Deity Microphones Pouch for Theos DBTX Bodypack Transmitter lets you securely attach a Theos DBTX wireless transmitter to a belt, bra, or costume for secure and visually discreet use in film, TV, theater, and live stage applications.
Made of soft and comfortable fabric, and featuring a belt loop and a clip, the beige Deity Microphones Pouch for Theos DBTX Bodypack Transmitter lets you securely attach a Theos DBTX wireless transmitter to a belt, bra, or costume for secure and visually discreet use in film, TV, theater, and live stage applications.
The DPA Microphone Holder for Stringed Instruments (5 Pieces) MHS6005 is a soft piece of rubber designed for mounting a DPA Miniature microphone on a violin, viola, cello or double bass.
The DPA ADH0002 is a pack of 25 double-sided tape pads for the Miniature Concealer lavalier mount.
The SM4080 Shock Mount from DPA Microphones is designed for use with the 4080 Miniature Cardioid Microphone, Lavalier.
SPD-HR21 (4-pin Hirose to 55mm/21mm Right Angle DC plug)
SPD-HR25 (4-pin Hirose to 55mm/25mm Right Angle DC plug)
Compatible with Sound devices 833/888/Scorpio or similar devices/inputs.
Lavalier Clip for microphone
SmallRig RODE Wireless Go Handle for Interview Using 3182 is designed for interviews using handheld wireless go. It comes with one horizontal and one vertical cold shoe mount to suit microphones in various scenes and an adjustable rod to provide a better interview experience. At the bottom features 1/4-20 threaded holes for mounting onto other shooting...
Délai habituel entre 4 et 5 semaines
Deity Adapter DXLR
Set of Three Clips for Wireless GO
Uwp Bodypack Clip
Microphone Holder For Dwm-01, Dwm-02, Utx-P03 And Ztx-01 Handheld Microphones
Deity Microphones UHF-RA Theos Receiver Antenna (Cuttable, 550 to 960 MHz)
The Deity Microphones UHF-TA Theos is a replacement antenna for the Theos bodypack transmitter. It can be cut to length to accommodate different frequency needs. A chart is included, so you know how long to cut the antenna to the corresponding frequency band (550 to 960 MHz). Different color-coded caps are also included to help identify corresponding...
C21 (3.5 Locking TRS to USB-C Timecode/audio Cable)
For d: screet: 4060/4061/4062/4063 and d: fine: 66/4066/4067. The makeup cover protects the microphone when applying makeup.
Clips for attaching a d: fine headset microphone cable to a speaker's clothes.
Clip and strain relief for use with the d: fineT headset microphones.
Clip and strain relief for use with the d: fineT headset microphones.
The DUA0715 from DPA is a replacement clip for the d:facto handheld vocal microphone (sold separately). It is used to securely attach the microphone to a mic stand. It mounts 5/8" threaded mic stands.
Color coded identification rings and make-up cover for d: fine Slim Headset Microphone.
For d: fine slim headset microphones and d: screet Slim (4160) miniature microphones. The makeup cover protects the microphone when applying makeup.
For d: fine 88 and 4088. The makeup cover protects the microphone when applying makeup.
The DUA0513 from DPA is a 5-pack of cable clamps for the 4080 miniature microphone (sold separately). It can be used to securely conceal the cable and keep it neatly tucked out of the way.
EW-DP MOUNTING PLATE
Set of Color Indicators for EW-D SK Bodypack Transmitters
Set of magnetic color identifiers for EW-D SKM. Includes (16) color identifiers
Set of magnetic color identifiers for EW-D EM. Includes (16) color identifiers
Turn your Wireless GO Transmitter into a piece of wearable tech with the RODE MagClip GO, a magnetic clip that lets you affix the transmitter to nearly any piece of clothing. Clip the transmitter to a tie, a shirt collar and more. Position the mic with complete flexibility.
Strap for VT720W
Délai de livraison habituel 4 semaines
With six pairs of color-coordinated rings, the Zoom XLR-6c helps you keep your XLR cables organized and separated. Red, orange, yellow, green, blue, and violet rings are provided-two of each, so you can easily track inputs and outputs by site alone.
Small frequency cap for SL Headmic 1, gold
Small frequency cap for SL Headmic 1, gray
Large Frequency Cap for SL Headmic 1, Gold
Wide frequency cap for SL Headmic 1, gray
Keep your XLR cables coordinated with the XLR-ID from RODE. The XLR-ID comprises eight color-coordinated rings in groups of two. You get two pink, two green, two orange, and two blue rings. Use the XLR-ID to ensure that four connections to and from your RODECaster Pro remain color coordinated, so you always know who is plugged into which input.
Sennheiser identification rings for SKM hand transmitters of the evolution wireless G3 series.
Belt clip for EW-D SK bodypack transmitter
Exchangeable, vertical clip for SK 6212.
Complete set of country adapters for EW-D receiver
Exchangeable, horizontal clip for SK 6212.
Battery compartment cover for XSW IEM EK receiver
Belt Clip for XSW IEM EK Receiver
Rubber pads for EW-D EM receiver
Uhf Antenna:566-622Mhz, Tv Channel 30-45
Uhf Antenna:638-758Mhz, Tv Channel 42-61
Uhf Antenna:470-862Mhz, Tv Channel 21-69, Cardioid
Sony Uhf Ground Plane Antenna