Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
Connect a mic equipped with a 3.5mm TRS connector to the XLR input of a professional camera, recorder, or mixer with the Rode VXLR Pro, a durable inline adapter outfitted with a transformer-balanced output to ensure quality signal transfer over long cable runs.
5 pièce (s) en stock
The VXLR+ is a 3.5mm female TRS socket to male XLR adaptor, which will convert 12-48V Phantom Power down to 3-5V 'Plug in Power', allowing R?DE on-camera microphones such as the VideoMicro and VideoMic GO, as well as self-worn microphones like the HS2 Headset Mic to receive power from the XLR input
5 pièce (s) en stock
COLORS 2 is a set of four coloured windshields, cable identification rings, tags and a sticker sheet for use with the Wireless GO, Wireless GO II, Lavalier GO and smartLav+, making it easy to keep tracking of who is talking on each microphone in multi-mic setups.
5 pièce (s) en stock
3,5 mm stereo jack to 6,35 mm stereo plug
4 pièce (s) en stock
Dummy-plate to cover D-shape cutouts, White
6 pièce (s) en stock
Black hook-and-loop for cables, measuring 16 mm x 200 mm, with Contrik imprint.
11 pièce (s) en stock
Velcro strap, red, width 16 mm, length 200 mm, with Contrik imprint.
25 pièce (s) en stock
CAS-OPTICALCON ADV
Drum 460mm + auxiliary spool WBR 250mm
Professional, black stage cable reel for efficient installation, with auxiliary coil for storage of all sorts of wires, conducts and lines. These cable reels are stackable with SK 4700 or SK 4730.
IP65 COUPLER SMAPC MTP24 ADV TPC
Speed boot assembly tool to press the XX boot onto shell
Special steel cable reel for daily rugged stage applications in proven quality. Portable sheet steel cable drum with RM-cover, for winding on both sides, with 2-fold axle bearing and swivelling crank handle. It has a core diameter of 281 mm.
Cable Drum HT582
Professional, black stage cable reel for efficient installation, with auxiliary coil for storage of all sorts of cables. These cable reels are stackable.
Inline Female audio 24 pole / video 6XRG59 + Dust Cap
Inline Female audio 24 pole / video 6xRG59
Cable Drum GT450
The matcher is particularly suitable for external floor sockets 2x FLF as a multifunctional stereo audio input. All signals are galvanically isolated via a special audio transmitter and led level adapted to a joint clamp output.
The FP-CH8 is an electronic chime generator that produces eight different synthesized chimes. Each chime can consist of up to 3 tones and 3 harmonics selected to produce sonically natural effects. Certain chimes are single tones and some are a sequence. Each of the 8 chimes is triggered by an individual external closure to ground. A momentary closure to...
Black FLF mounting plate, equipped with one splitter, which is particularly suitable for recording existing balanced stereo transmissions (e.g. interpreter equipment). Galvanic isolation is offered as well as an additional level-adjusted unbalanced RCA output signal.
Panel female audio 24 pole / video 6XRG59
The assembly tool HX-TT-1 consists of a crimp tool and a press tool to assemble NP3TT-1-* and NP3TT-AU-* plugs.
Inline male audio / video 6XRG59 + Dust Cap
This cable reel is made of sheet steel, has a core diameter of 320 mm and no cover. It is suitable for daily outdoor applications and is equipped with exchangeable, shock-resistant steel panels. An ergonomic fixing brake is integrated in the frame.
Panel female audio 24 pole / video 6XRG59
Cable Drum GT380
Black open plastic cable reel with a core diameter of 170 mm. Special portable and stackable version for professional rental business. Empty weight of 4.4 kg.
Panel male audio 24 pole / video 6xRG59
Standard Circular Connector POSITIONER MINICON MPC MALE CRIMP W/ HX
This cable reel is made of sheet steel, has a core diameter of 178 mm and no cover. It is suitable for daily outdoor applications and is equipped with exchangeable, shock-resistant steel panels. An ergonomic fixing brake is integrated in the frame.
XP Opt. Chassis Con M
ANTENNA CABLE RG142BU SMA 4.5M
ANTENNA CABLE S04162B SMA 15M
This cable reel is made of sheet steel, has a core diameter of 178 mm and no cover. It is suitable for daily outdoor applications and is equipped with exchangeable, shock-resistant steel panels. An ergonomic fixing brake is integrated in the frame.
Flap with auxiliary coil ZU GT 450, SK 450
Die for Crimp XLR XX-HA. Suitable for tool HX-R-BNC. Standard B-crimp acc. to IEC 60352-2. Wire size AWG 24-22, 0.22 - 0.34 mm2
XP Opt. Chasis CON F
Combiner Line combines left and right channel of stereo signal by means of a passive network. afterwards the circuit is balanced by a NTL transformer (galvanic isolation) and terminated by a male XLR output. Especially used for stereo equipment with asymmetric outputs (RCA) for connections to a symmetric input (XLR female)
Distributes symmetrical mono output signal of a source to 2 RCA outputs+ (asym.) L + R. Via NTL1 (galvanic isolation) and a downstream passive network. Especially suited for transmission lines that should remain symmetric and be rendered asymmetric directly before arriving at the user (recipient).
DI-Adapter Mic 2 / 200 Ohm / 1:1
Ground-Loop-Insulator, Line XLR female/XLR male, 1:1 transmission for 600 Ohm impedance, Line up to 6V, frequency 30Hz-40KHz. Transmission with ground lift 1:1 (NTL1), no ground loops and annoyances anymore.
Adapter Line, asymmetrical transmission XLR fem./RCA fem., 1:1 transmission for 600 Ohm impedance, Line up to 6 V, 30Hz-40KHz frequency response. The transformed signals will be electrically isolated with the internal transformer NTL1.
Adapter Line, symmetrical transmission XLR male / RCA female, 1:1 transmission for 600 Ohm impedance, Line up to 6 V, 30Hz-40KHz frequency response. The transformed signals will be electrically isolated with the internal transformer NTL1.
Right-angled MCX plug to right-angled SMA plug (pack of 2)
Délai de livraison habituel 4 semaines
Phantom Audio Adapter for Micron 8 pin system
Délai de livraison habituel 4 semaines
Phantom Audio Adapter for Sennheiser 1 Pin
Délai de livraison habituel 4 semaines
Phantom Audio Adapter for Micron Explorer with 6 Pin
Délai de livraison habituel 4 semaines
Phantom Audio Adapter Hardwired Version
Délai de livraison habituel 4 semaines
Phantom Modules for Audio Limited 6 Pin. The VT1126 phantom adapter is a small unit that allows hard-wired use of miniature lavalier microphones. It converts 48V phantom to electret power and puts out the audio as an electronically balanced signal on an XLR 3-pin male connector.
Délai de livraison habituel 4 semaines
Ground loop insulator line phono jack to phono jack, 1:1 transmission for signals with 600 ohm impedance, Line up to 6 V, 30Hz-40KHz frequency. Transmission with ground lift 1:1 (NTL1), interferences and ground loops can be avoided.
An adapter that connects the d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to Audio Technica 3000 Series (Generation 4), 5000 Series ( Generation 3), 6000 Series.
The DPA DAD6004 is a MicroDot to 6-pin Lemo connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Audio Limited TX 2000 and TX 2020 wireless transmitters.
Flap for GT 450, SK 450
Cover with lockable door for GT380 and SK 380
Connector
Délai de livraison habituel 4 semaines
Drum plate HT582
The DAD6001 is an adapter featuring XLR-male and MicroDot connections. The adapter is designed to attach DPA microphones to external phantom power sources such as preamps, mixers, etc. This version features a belt clip for added convenience while using in mobile situations.
The DPA DAD6008 is a MicroDot to 4-pin Hirose connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Sony WRT820, WRT860 and WRT8 wireless transmitters.
The DPA DAD6033 is a MicroDot to 4-pin Hirose connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Audio-Technica AEW-T1000 D UniPak.
The DPA DAD6008 is a MicroDot to 4-pin Hirose connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Sony WRT820, WRT860 and WRT8 wireless transmitters.
The DPA DAD3051 is a MicroDot to 4-pin Hirose adapter for the DPA 4063 and 4067 low DC microphones. The adapter allows the 4063 and 4067 microphones to be used with the Ramsa WX-RP410 bodypack transmitter.
The rear compatibility of opticalCON MTP 24 chassis fitting with standard MTP 24 (ELITE male with 20 N springforce) breakout cable allows easy adaptation to fiber standard connectors such as LC, SC, ST. The approved dust shutter ensures high mating cycles and minimal maintenance. The housing seal is used for color coding and IP protection.
Flap for GT310, SK310, HT3XX,-4XX,-5XX
Handtool HTX
The DAD6035 Audio Ltd. Mini TX Adapter from DPA Microphones features a Microdot connector on one side and a Lemo 4-pin connector on the other. It is used with DPA's series of miniature microphones to make them compatible for use with Audio Ltd. Mini TX wireless transmitters.
The DPA DAD6002 is a MicroDot to Coaxial Lemo connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Sennheiser BF1083-U/BF1053-U.
The DPA DAD6034 is a MicroDot to locking 1/8" (3.5mm) mini connector. The connector enables direct integration between DPA microphones and belt-pack transmitters featuring locking mini connections such as the Sennheiser Evolution series.
The DPA DAD6032 is a MicroDot to Switchcraft TA4-Female Connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Beyerdynamic Opus and Mipro ACT series.
The DPA DAD6030 is a MicroDot to Switchcraft TA4-Female Connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Telex / Electro-Voice RE-1 series.
This DPA Adapter converts a Microdot connection to a TA5-female for adapting DPA Miniature Microphones with wireless transmitters featuring TA5-male inputs. For normal sound pressure level operation only (0 dB attenuation).
The DPA DAD6019 is a MicroDot to 1/8" mini connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Sony Freedom WRT-805 transmitter.
The DPA DAD6017 is a MicroDot to Switchcraft TA3-female connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the AKG PT 60, 80, 81, 400, 4000, Samson UT1L and VT2L transmitters.
The DPA DAD6010 is simply an adapter that features the DPA standard Microdot connection and a Switchcraft TA4-female connection. The adapter is designed for connecting DPA microphones to transmitters and power supplies featuring TA4-male connections.
The DPA DAD3056 Adapter simply converts the Microdot connection found on DPA microphones for use with Lectrosonics wireless transmitters with TA5 inputs.
This DPA adapter connector simply converts their proprietary M-DOT microphone connection for use with the Zaxcom TRX900 wireless transmitter / IFB receiver. The adapter will also supply phantom power to the connected microphone.
The DPA DAD3050 is a MicroDot to mini 1/8" (3.5mm) adapter for the DPA 4063 and 4067 low DC microphones. The adapter allows the 4063 and 4067 microphones to be used with TOA WM360 and WM4310 bodypack transmitters.
Hand tool HTXP
Fiche male M25 Reduced
Fiche male M25 Oversize
Round panel flange for D-Series
Hand tool to hold the barrel of the PX series while the boot is tightened. With the HTXP the boot can be closed while with the HTPXS the barrel can be hold up for proper tightening.
Cover plate for cable reel KTGT310.OF with 8x cut-outs for D-series chassis connectors and one cut-out for multipin connectors with 13 to 19 pins.
Cover plate for cable reel type KTGT450.OF with 24x cut-outs for D-series chassis connectors.
Cover plate 8xD-cutout / GT450
Female BNC 75 Ohm input - male XLR cable end 110 Ohm output. Interface balanced and coaxial lines.
Female XLR cable end 110 Ohm input - female BNC 75 Ohm output. Interface balanced and coaxial lines.
PanelF 13Pin No Con Standard
Inline M 19pin No Con Pg16
Female XLR chassis connector 110 Ohm input - female BNC 75 Ohm output. Interface balanced and coaxial lines.
Female BNC 75 Ohm input - male XLR chassis connector 110 Ohm output. Interface balanced and coaxial lines.
XLR female / XLR male - Phase reverse with switch. Pin 2+3 corss-bonded
Drum plate GT*
Inline M 25pin No Con ?13-18 Mm
Inline M 25pin No Con ?6-13 Mm
Panel F 25pin No Con Standard
Black, 5 mm wide Velcro strap, available on reels of 100 m. The fastener is delivered in a PE bag and can simply be cut with scissors to the desired length. Ideal for neat cable management and for various packaging options.
XLR female / XLR male - Groundlift with switch. Pin 1 not interconnected
Hand tool for tightening the bushing of the XLR XX-14 series, jumboPLUG and etherCON CAT6A series.
2 pole 1/4 inch professional phone plug, right-angle, gold plated contacts, black plated. The ultimatePLUG combines the functions of the silentPLUG and timbrePLUG in one product.
In-line DMX adapter to join RJ45 CAT5 connector to female 5 pole XLR
The NOPF-16D-XP includes 10 spare power contacts to assemble 5 HYBRID MED Chassis.
Contact Male Kit S1 XP
Contact Female Kit S1 XP
Connector Clamp
The new patented Flexo Mounting System has been created to attractively terminate applications with a secure mountable end, 5 pieces.
In-line DMX adapter to join RJ45 CAT5 connector to male 5 pin XLR
This cover plate is designated for the cable reel type KTGT450.OF and has 32x D-series cut-outs.
Adaptor XLR female to XLR male with atenuator -18dB
Adaptor XLR female to XLR male with atenuator -60dB
3-pole XLR female cable connector to 3-pole XLR male cable connector, with attenuator -40dB.
Adaptor XLR female to XLR male with atenuator -30dB
Adaptor XLR female to XLR male with attenuator -6dB
Adaptor XLR female to XLR male with attenuator -9dB
Strain relief bar
XLR female / XLR male - Groundlift. Pin 1 not interconnected
Distance Ring GT450
DMX PCB adapter fitted with 4 pole female XLR chassis connector terminated with IDC or screw terminals. For use where cables have been installed & wall plates or patch bays need fixing at high speed & in a cold (no soldering) environment. The IDC terminals do not require a punch down tool and will accept 0.5 - 0.64 mm wire with a maximum outer...
Auxiliary coil for GT 380 + SK380
Doorflap cover set for KTGT310.OF
Connectors for Microphones / Headsets (mounted)
Délai de livraison habituel 4 semaines
Speakon TXX-Line 8Pole Female B
Adapter XLRF 5POLE - XLRF Black
PCB adapters fitted with 4 pole male XLR chassis connectors terminated with IDC or screw terminals. For use where cables have been installed & wall plates or patch bays need fixing at high speed & in a cold (no soldering) environment. The IDC terminals do not require a punch down tool and will accept 0.5 - 0.64 mm wire with a maximum outer...
Speakon TXX-Line 8Pole Female
Cover plate for cable reel type KTGT450.OF with one cut-out for one D-series chassis connectors.
Cover plate for cable reel type KTGT310.OF with 12x cut-outs for D-series chassis connectors.
Doorflap cover set for KTGT235.OF
Speakon TXX-Panel 8Pole Female B
LPS Low-Profile right angle TA3F "Mini XLR" 3-pin Female Connector, Standard Red cap, Multi-position cable exit from 3 o'clock or 9 o'clock, Outlet for up to 3.2mm OD cable
LPS Low-Profile right angle TA3F "Mini XLR" 3-pin Female Connector, Standard Green cap, Multi-position cable exit from 3 o'clock or 9 o'clock, Outlet for up to 3.2mm OD cable
Cover plate 8xD-cutout / GT310
7 pole right angle female cable connector, black metal housing, gold contacts
8 pole speakON feedthrough coupler for cable extensions
Connector
Délai de livraison habituel 4 semaines
Speakon TXX-Line 8Pole Male B
Stereo 1/4 inch locking jack - Stereo 1/4 inch locking jack (Tip, Ring, Sleeve contact), extension adapter
Cover plate for cable reel type KTGT310.OF with 4x cut-outs for D-series chassis connectors.
This cover plate is designated for the cable reel type KTGT310 and has one D-series cut-out.
7 pole female receptacle, solder contacts, black metal housing, gold contacts
Adapter XLRM 5Polr - XLRM Black
7 pole right angle male cable connector, black metal housing, gold contacts
Universal D-format coupler for self-made assembly of powerCON or speakON cables with a cable cross-section up to 6 mm2, with fixed MG25 cable-gland.
Universal D-format coupler for self-made assembly of powerCON or speakON cables with a cable cross-section up to 6 mm2. BoXo coupler with MG 25 cable-gland and bending protection.
Pair of professional Phono Plug marked red and black
5 pole Midi receptacle with solder contacts in D-series chassis.
5 pole male cable connector, heavy duty, metal boot and stainless steel shell, gold contacts
7 pole female receptacle, solder cups, black metal housing, gold contacts
3 pole female EMC-XLR cable connector for panel mount. The EMC-XLR Series is a specifically designed version of the XX series to give enhanced RF screening for critical applications in live performance and recording where there are particular problems with radio transmission or mobile phones.
Low-Profile right angle XLR 3-pin Male Connector, Standard Cap, Multi-position cable exit from 6 o'clock or 12 o'clock, for cables up to 3.4mm OD, Red cap
Low-Profile right angle XLR 3-pin Male Connector, Standard Cap, Multi-position cable exit from 6 o'clock or 12 o'clock, for cables up to 3.4mm OD, black cap
Low-Profile right angle XLR 3-pin Male Connector, Standard Cap, Multi-position cable exit from 6 o'clock or 12 o'clock, for cables up to 3.4mm OD, blue cap
Low-Profile right angle XLR 3-pin Male Connector, Standard Cap, Multi-position cable exit from 6 o'clock or 12 o'clock, for cables up to 3.4mm OD, Green cap
6 pole right angle female cable connector, black metal housing, gold contacts
7 pole female receptacle, solder cups, black metal housing, gold contacts
5 pole XLR female - 5 pole XLR female (gender conversion adapter)
5 pole female cable connector, heavy duty, all metal design, gold contacts
7 pole female cable connector with black metal housing and gold contacts
Panel M 25pin No Con
speakON NL4FX - 3 pole XLR female
1/8" Female Stereo Mini-Jack Terminal Block
7 pole right angle female cable connector, nickel housing, silver contacts
Auxiluary coil for GT/SK310, HT3XX,-4XX,-5XX
2 pole 1/4 inch professional phone plug, gold contacts, black metal housing with CRYSTALLIZED- Swarovski Elements
3 pole unisex XLR cable connector
6 pole female receptacle, solder contacts, black metal housing, gold contacts
7 pole female receptacle, solder contacts, Nickel housing, silver contacts
3 pole unisex XLR cable connector, black
Switch-module 2x2 position, outer thread M17x1
3 pole XLR female - BNC socket
7 pole female cable connector, black metal housing and gold contacts
2 pole right angle 1/4 inch professional phone plug, gold plated contacts, red coating, silent switch
6 pole female receptacle, solder cups, black metal housing, gold contacts
Speakon TXX-Line 4Pole Male
Speakon TXX-Line 4Pole Male B
speakON NL4FX - 3 pole XLR male
7 pole female receptacle, solder cups, Nickel housing, silver contacts
7 pole male receptacle, solder cups, black metal housing, gold contacts
3 pole XLR male - BNC socket
6 pole female receptacle, solder cups, black metal housing, gold contacts
6 pole right angle male cable connector, black metal housing, gold contacts
5 pole right angle female cable connector, black metal housing, gold contacts
7 pole female receptacle, solder cups, Nickel housing, silver contacts
7 pole male receptacle, solder cups, black metal housing, gold contacts
4 pole male cable connector, heavy duty, metal boot and stainless steel shell, gold contacts
Speakon TXX-Line 4Pole Female
Speakon TXX-Line 4Pole Female B
7 pole right angle male cable connector, nickel housing, silver contacts
4 pole female cable connector, heavy duty, all metal design, gold contacts
6 pole right angle female cable connector, nickel housing, silver contacts
Auxiliary spool (plastic ring) for cable reel KTGT450.OF. The short cable end is retained inside the cable reel.
5 pole XLR male - 5 pole XLR male (gender conversion adapter)
Panel M 13Pin No Con
5 pole female receptacle, horizontal PCB mount, black metal housing, silver contacts, M3 mounting holes
Chassis connector male 3 pole heavy duty
3 pole female EMC-XLR cable connector
3 pole female cable connector, black metal housing. FX cable connector with noiseless ON-OFF switch short-circuiting contacts 2+3. For use with a microphone without switch.
6 pole female receptacle, solder contacts, Nickel housing, silver contacts
Cable Con. Fem. 5Pole Top -14
3 pole XLR female - 5 pole XLR female (gender conversion adapter)
Heavy duty sealed male 5-pole XLR chassis connector for outdoor use, weatherproof applications as well as in a wide range of industrial applications.
2x phono (RCA) jack chassis connectors (red/black) with solder terminals assembled on a black D-series plastic plate (DBA-BL).
5 pole male cable connector, TRUE OUTDOOR PROTECTION (TOP), gold contacts
Double Phono (RCA) chassis on a white PVC mounting plate in D-shape
3 pole XLR male - 5 pole XLR female for lighting (DMX) applications
7 pole female cable connector with Nickel housing and silver contacts
8 pole cable connector, latch lock, chuck type strain relief for cables 8 - 20 mm diameter, 30 A continuous per contact
Metal dust cover
7 pole male receptacle, solder cups, Nickel housing, silver contacts
6 pole female receptacle, solder cups, Nickel housing, silver contacts
2 pole 1/4 inch professional phone plug, gold plated contacts, red rubber overlay, silent switch
Cable Con. Male 5Pole Top -14
3 pole XLR female - Stereo 1/4 inch plug (Tip, Ring, Sleeve contact)
3 pole XLR female - Stereo 1/4 inch locking jack (tip, ring, sleeve contact)
6 pole female cable connector with black metal housing and gold contacts
Speakon TXX-Panel 8Pole Male B
Speakon TXX-Panel 8Pole Male
Plastic cover for cable drum, suitable for mounting connectors.
Heavy-duty 3-pole XLR male cable connector.
7 pole male receptacle, solder cups, Nickel housing, silver contacts
3 pole female cable connector, Nickel housing. FX cable connector with noiseless ON-OFF switch short-circuiting contacts 2+3. For use with a microphone without switch
3 pole XLR male - stereo 1/4" locking jack (Tip, Ring, Sleeve contact)
5 pole female receptacle, solder contacts, black metal housing, gold contacts
6 pole female receptacle, solder cups, Nickel housing, silver contacts
7 pole female cable connector with black metal housing and silver contacts
6 pole right angle male cable connector, nickel housing, silver contacts
Designed to match the channel colors in Rode Connect software, Rode COLORS is a set of color-coded caps and cable clips for up to four Rode NT-USB Mini microphones, making it extremely simple to keep track of who is talking in panel podcasts and multi-person interviews and live streams.
Colors Set 3 - Color identifiers, 4 colors
3 pole XLR female - 3 pole XLR female, black
3 pole XLR female - 5 pole XLR male for lighting (DMX) applications
3 pole XLR male - stereo 1/4 inch plug (Tip, Ring, Sleeve contact)
3.5 mm stereo jack on a black DBA plate. The breakout cable on the rear side is assembled with a 3.5 mm stereo jack and is approximately 20 cm long.
3.5 mm stereo jack on a black DBA plate. The breakout cable on the rear side is assembled with a 3.5 mm stereo jack and is approximately 20 cm long.
3 pole XLR male - 5 pole XLR male (gender conversion adapter)
3 pole XLR female - Mono 1/4 inches plug (tip, sleeve contact)
5 pole male XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, color coding possible. The switching contacts are activated by the mating connector offering the possibility to indicate, monitor and control the mated connection. The switch provides a normal open and normal...
The spring-loaded cover SCCD-W shuts automatically after unplugging the cable connector and seals the chassis connectors against dust and water to IP65. The transparent cover allows you to see the protected chassis connector all the time.
Hand tool for tightening the bushing of the speakON NL4FC and the powerCON 20A cable connectors.
5 pole right angle female cable connector, nickel housing, silver contacts
7 pole female cable connector with Nickel housing and silver contacts
7 pole male cable connector with black metal housing and gold contacts
Heavy-duty 5-pole XLR female cable connector.
5 pole female receptacle, horizontal PCB mount, Nickel housing, silver contacts, M3 mounting holes
3.5 mm Mini jack chassis connectors with solder contacts and fixing nuts pre-assembled on a dummy plate with D-Series cut-out (DBA-Platte).
7 pole male cable connector with Nickel housing and silver contacts
4 pole right angle female cable connector, black metal housing, gold contacts
Heavy duty sealed male 4-pole XLR chassis connector for outdoor use, weatherproof applications as well as in a wide range of industrial applications.
3 pole male cable connector, heavy duty, black metal boot and stainless steel shell, gold contacts
3 pole XLR male - Mono 1/4 inches plug (tip, sleeve contact)
6 pole male receptacle, solder contacts, black metal housing, gold contacts
5 pole female XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, color coding possible
6 pole male receptacle, solder cups, black metal housing, gold contacts
3.5 mm Mini jack chassis connectors with solder contacts and fixing nuts pre-assembled on a dummy plate with D-Series cut-out (DBA-Platte).
3 pole XLR female - RCA / phono plug
Speakon TXX-Line 4Pole Female B
3 pole XLR female - RCA / phono socket
3 pole male cable connector, heavy duty, metal boot and stainless steel shell, gold contacts
6 pole female cable connector with Nickel housing and silver contacts
7 pole male cable connector with black metal housing and silver contacts
5 pole female receptacle, solder cups, black metal housing, gold contacts
6 pole male receptacle, solder cups, black metal housing, gold contacts
6 pole female cable connector with black metal housing and silver contacts
7 pole male cable connector, Nickel housing and silver contacts
3 pole XLR male - RCA / phono plug
5 pole right angle male cable connector, black metal housing, gold contacts
3 pole XLR male - 3 pole XLR male (gender conversion adapter, black plated)
6 pole male cable connector, black metal housing and gold contacts
6 pole male receptacle, solder cups, Nickel housing, silver contacts
6 pole female cable connector with Nickel housing and silver contacts. Equivalent to switchcraft pin layout.
6 pole female cable connector with Nickel housing and silver contacts
6 pole male receptacle, solder contacts, black metal housing, silver contacts
3 pole XLR female - 3 pole XLR female
4 pole female receptacle, horizontal PCB mount, black metal housing, silver contacts, M3 mounting holes
Metall haube 25p
5 pole female receptacle, solder cups, black metal housing, gold contacts. Universal D-size metal body XLR panel mount series. UL recognized component.
Heavy duty sealed male 3-pole XLR chassis connector for outdoor use, weatherproof applications as well as in a wide range of industrial applications.
3 pole right angle female cable connector, black metal housing, gold contacts
3 pole XLR male - RCA / Phono socket
Extrusion profile set including screws, black plated, for combination with all D Shape connectors
3 pole female cable connector, RF-protected, gold contacts
3 pole, dual, 4.4 mm (0.173 inches) tiny telefone plug bantam type, solder termination for T+R, hex crimp of S, black plastic housing, nickel contacts
3 pole female cable connector, TRUE OUTDOOR PROTECTION (TOP), gold contacts
6 pole male cable connector with black metal housing and gold contacts
3 pole XLR female - 3 pole XLR male (contacts 2 - 3 inverted)
6 pole male receptacle, solder cups, Nickel housing, silver contacts
5 pole female receptacle, solder cups, Nickel housing, silver contacts, M3 mounting holes
Speakon TXX-Line 4Pole Female
6 pole male receptacle, solder contacts, Nickel housing, silver contacts
5 pole female receptacle, solder contacts, Nickel housing, silver contacts
4 pole female receptacle, horizontal PCB mount, Nickel housing, silver contacts, M3 mounting holes
4 pole right angle female cable connector, nickel housing, silver contacts
Phono plug cable connector with gold-plated lamellar contacts, black housing and cuck, for cables with a diameter of max. 6 mm. Supplied in pairs.
4 pole right angle male cable connector, black metal housing, gold contacts
3 pole right angle female cable connector, black metal housing, silver contacts
5 pole male receptacle, horizontal PCB mount, black metal housing, silver contacts, M3 mounting holes
3 pole right-angle 1/4 inches professional phone plug, gold contacts, black shell
3 pole male EMC-XLR cable connector
Phono plug cable connector with gold-plated lamellar contacts, nickel housing and cuck, for cables with a diameter of max. 6 mm. Supplied in pairs.
speakON TX-Panel 4 Pole Female
XLR male-female feedthrough adapter for panel mount
speakON NL4FC - 1/4 inches mono jack adapter
3 pole XLR male - 3 pole XLR female (extention adapter)
RCA, socket, 1-6mm, VPE: 1x each L/R, MG, NI
RCA, plug, max.6mm, VPE: 1x each L/R, MG, SW
Speakon Panel 8Pole V
6 pole male cable connector with Nickel housing and silver contacts
Speakon TXX-Line 4Pole Male B
5 pole male receptacle, horizontal PCB mount, Nickel housing, silver contacts, M3 mounting holes
6 pole male cable connector with black metal housing and silver contacts
5 pole female receptacle, solder cups, black metal housing, silver contacts
RCA, plug, 1-6mm, VPE: 1x each L/R, MG, NI
XLR female-male feedthrough adapter for panel mount
0.206 inches MIL-plug (MIL-P-642/5A), black metal housing, brass contacts
RCA, plug, 1-6mm, PU: 1x L / R, MG, SW
5 pole female receptacle, solder cups, Nickel housing, silver contacts, M3 mounting holes
Special gold-plated phono (RCA) chassis mount sockets. They're supplied in pairs with 2 washers, the drill hole measures 8 mm
5 pole female cable connector with black metal housing and gold contacts
6 pole male cable connector with Nickel housing and silver contacts
6 pole male cable connector with Nickel housing and silver contacts. Equivalent to Switchcraft pin layout.
3 pole XLR female module, D-shape, black plated, solder contacts
5 pole female receptacle, solder cups, Nickel housing, silver contacts
RCA, plug, 1-6mm, PU: each 1x L / R, MG, NI
3 pole right angle male cable connector, black metal housing, gold contacts
PCB adapters fitted with 4 or 5 pin male or female XLR chassis connectors terminated with IDC or screw terminals. For use where cables have been installed & wall plates or patch bays need fixing at high speed & in a cold (no soldering) environment. The IDC terminals do not require a punch down tool and will accept 0.5 - 0.64 mm wire with a maximum...
3 pole XLR male - 3 pole XLR male (gender conversion adapter)
4 pole male receptacle, horizontal PCB mount, Nickel housing, silver contacts, M3 mounting holes
3 pole 1/4 inch professional phone plug, nickel contacts, black shell
Phono Jack, gold-plated contacts, housing Nickel, cable Ø 4 mm, per pair
4 pole right-angle cable connector, chuck type strain relief, dark gray bushing
Speakon Panel 8Pole V
3 pole right angle male cable connector, black metal housing, silver contacts
5 pole right angle male cable connector, nickel housing, silver contacts
5 pole female receptacle, solder cups, black metal housing, silver contacts. Universal D-size metal body XLR panel mount series. UL recognized component.
Speakon TXX-Line 4Pole Male
Speakon Panel 8Pole V Bag
The faceplate is fitted with a 3.50 mm female jack socket. A 0.2m female 3.50 mm jack stereo audio cable is connected to the back of the faceplate.
5 pole female cable connector with black metal housing and silver contacts
5 pole female receptacle, solder cups, Nickel housing, silver contacts
3 pole female receptacle, D-size metal body, screw terminals accommodating wire range 0.14mm2 to 0.5mm2 (AWG 26 -20), black metal housing, gold contacts, UL recognized component
5 pole male receptacle, solder contacts, black metal housing, gold contacts
RCA, socket, 1-6mm, PU: 1x L / R, MG, SW
4 pole male receptacle, horizontal PCB mount, black metal housing, silver contacts, M3 mounting holes
3 pole right angle female cable connector, nickel housing, silver contacts
The RM auxiliary spool combined with the cable drum serves the purpose of storing and safely transporting wires.
3 pole female receptacle, solder cups, velour-chromium housing, machined gold contacts
4 pole right angle male cable connector, nickel housing, silver contacts
4.4 mm (0.173 inches) tiny telefone plug bantam type, solder termination for T + R, crimp termination for S, HEX crimp cable strain relief, black plastic housing, gold contacts. Ideal use with TT patch panels.
speakON TX-Panel 4 Pole Male B
Professional locking 1/4 inch cable jack for secure in-line connections. Black metal housing, silver contacts, excellent cable protection. The 3 pole phone cable jack in-line version provides stable and secure connections where accidental disconnect or shock and vibration may occur. It latches with standard A-gauge mono or stereo plugs.
5 pole male receptacle, solder cups, Nickel housing, siver contacts, M3 mounting holes
Speakon Panel 8Pole Bag
Speakon Panel 8Pole
Locking 1/4 inches phone jack, D-size shell, black metal housing and gold contacts. The 3 pole phone jack panel mount version provides stable and secure connections where accidental disconnect or shock and vibration may occur. It latches with standard A-gauge mono or stereo plugs. Plug locks-in automatically when mating and unlocks only by pressing red...
3 pole XLR male module, D-shape, black plated, solder contacts
3 pole 1/4 inches professional phone plug, up to 10 mm cable O.D.
5 pole male receptacle, solder cups, black metal housing, gold contacts
Professional locking 1/4 inches cable jack for secure in-line connections. Nickel housing, silver contacts, excellent cable protection
5 pole male receptacle, solder cups, black metal housing, gold contacts. Universal D-size metal body XLR panel mount series. UL recognized component.
5 pole female cable connector with Nickel housing and silver contacts
3 pole right-angle 1/4 inches professional phone plug, nickel contacts, nickel shell
5 pole female chassis connector, TRUE OUTDOOR PROTECTION (TOP)
4 pole female receptacle, solder contacts, black metal housing, gold contacts
5 pole female cable connector with Nickel housing and silver contacts
4 pole female receptacle, solder cups, black metal housing, gold contacts
1/4" B-Gauge plug (BPO 316), red metal housing, Nickel contacts
5 pole male receptacle, solder cups, black metal housing, silver contacts
4 pole female receptacle, solder cups, black metal housing, gold contacts
4 pole female receptacle, solder cups, Nickel housing, silver contacts, M3 mounting holes
speakON TX-Panel 4 Pole Male
3 pole female XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount
3 pole male XLR housing, outer thread M 17x1, solder contacts
4 pole female receptacle, solder cups, black metal housing, silver contacts
Phono cable plug 5mm cable (per pair)
5 pole male receptacle, solder cups, black metal housing, silver contacts
3 pole female cable connector, velour-chromium housing and machined gold contacts.
Phono cable plug 4mm cable (per pair)
Locking 1/4 inches phone jack, D-size shell, black metal housing and silver contacts. The 3 pole phone jack panel mount version provides stable and secure connections where accidental disconnect or shock and vibration may occur. It latches with standard A-gauge mono or stereo plugs. Plug locks-in automatically when mating and unlocks only by pressing red...
3 pole right angle male cable connector, nickel housing, silver contacts
5 pole male receptacle, solder cups, Nickel housing, silver contacts
3 pole male XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount
3 pole adapter TINY xlr male to male XLR, black metal shell, gold plated contacts
Phono cable plug 6mm cable (per pair)
2 pole 1/4 inch professional phone plug, up to 10 mm cable O.D
4 pole female receptacle, solder cups, black metal housing, silver contacts
5 pole male receptacle, solder cups, Nickel housing, silver contacts, M3 mounting holes
3 pole female receptacle, horizontal PCB mount, black metal housing, gold contacts
Locking 1/4 inches phone jack, D-size shell, nickel metal housing and silver contacts. The 3 pole phone jack panel mount version provides stable and secure connections where accidental disconnect or shock and vibration may occur. It latches with standard A-gauge mono or stereo plugs. Plug locks-in automatically when mating and unlocks only by pressing red...
5 pole male cable connector with black metal housing and gold contacts
5 pole male receptacle, solder cups, Nickel housing, silver contacts
1/4 inches B-Gauge plug (BPO 316), black metal housing, nickel contacts
4 pole female cable connector with black metal housing and gold contacts
4 pole chassis connector, black D-size flange, countersunk thru holes, screw termination. This chassis connector is not airtight.
5 pole male receptacle, solder contacts, black metal housing, silver contacts
3 pole female receptacle, horizontal PCB mount, Nickel housing, silver contacts, M3 mounting holes
4 pole female receptacle, solder contacts, Nickel housing, silver contacts
4 pole female receptacle, solder cups, Nickel housing, silver contacts
3 pole female chassis connector, TRUE OUTDOOR PROTECTION (TOP)
3 pole female cable connector with white painted housing and silver contacts
5 pole female cable connector W/O BOOT
3 pole male receptacle, D-size metal body, screw terminals accommodating wire range 0.14mm2 to 0.5mm2 (AWG 26 -20), black metal housing, gold contacts, UL recognized component
3 pole female receptacle, horizontal PCB mount, black metal housing, silver contacts
Threading flat-head screw M3x10, black, for D-Serie connectors. Do not use with EtherCon-Series (E-SCREW recomended), packaging unit of 100 pcs.
3 pole female receptacle, vertical PCB mount, black metal housing, gold contacts
3 pole female receptacle, horizontal PCB mount, Nickel housing, silver contacts
5 pole male cable connector W/O BOOT
5 pole male receptacle, solder contacts, Nickel housing, silver contacts
4 pole female cable connector with black metal housing and gold contacts
4 pole male chassis connector, metal housing, vertical PCB mount, self tapping screw holes (A-screw)
3 pole 3.5mm jack socket with black body, gold plated contacts and locking ring. For audio cables up to 6 mm in diameter. The connection with a jack plug with a screw lock ensures secure audio transmission.
3 pole female receptacle, solder cups, white painted housing, silver contacts
3 pole male receptacle
3 pole female receptacle, vertical PCB mount, nickel housing, silver contacts, M3 mounting holes
Cable outlet including chuck type strain relief, inner thread M 17x1
Lockable 4 pole speakON adapter
4.4 mm (0.173 inches) tiny telefone plug bantam type, solder termination for T + R, crimp termination for S, HEX crimp cable strain relief, black plastic housing, Nickel contacts. Ideal use with TT patch panels.
4.4 mm (0.173 inches) tiny telefone plug bantam type, solder termination for T+ R, crimp termination for S, HEX crimp cable strain relief, red plastic housing, nickel contacts. Ideal use with TT patch panels.
Insert 6pole XLR Female Au
5 pole male chassis connector, TRUE OUTDOOR PROTECTED (TOP)
5 pole male cable connector with Nickel housing and silver contacts
5 pole male cable connector with black metal housing and silver contacts
3 pole female receptacle, vertical PCB mount, Nickel housing, silver contacts
4 pole female cable connector with black metal housing and silver contacts
3 pole male receptacle, solder cups, white painted housing, silver contacts
Stereo 1/4 inches plug module, inner thread M 17x1, solder contacts
Hook and Loop Cable Tie 400 x 38mm
4 pole female cable connector with Nickel housing and silver contacts
4 pole male receptacle B
4 pole male receptacle, solder cups, black metal housing, gold contacts
3 pole male cable connector, RF-protected, gold contacts
RCA / Phono female modul, inner thread M 17x1, solder contacts
RCA / Phono male modul, inner thread M 17x1, solder contacts
5 pole male cable connector with Nickel housing and silver contacts
Mains Cable Connector Outlet CBC Rean SB
Mains Cable Connector Outlet CBC Rean Bulk
3 pole male receptacle, horizontal PCB mount, black metal housing, gold contacts
3 pole male receptacle, solder cups, velour chromium housing, gold contacts
4 pole male receptacle, solder cups, black metal housing, silver contacts
3.5mm 3p jack with fuse SW/GO solder
4 pole female receptacle, solder cups, Nickel housing, silver contacts
4 pole male receptacle, solder cups, Nickel housing, silver contacts, M3 mounting holes
3 pole 1/4 inches professional phone plug, gold contacts, black shell
Mains Cable Connector Inlet CBC Rean SB
3 pole female receptacle, solder cups, black metal housing, gold contacts, M3 mounting holes
3 pole male cable connector, white painted housing, silver contacts
3 pole female XLR housing, outer thread M17x1, solder contacts
Mains Cable Connector Inlet CBC Rean Bulk
3 pole male cable connector, velour-chromium housing, gold contacts
Heavy-duty 3-pole XLR TOP male chassis connector with gold-plated contacts.
4 pole female receptacle 0
5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, black chrome shell
3 pole male receptacle, horizontal PCB mount, Nickel housing, silver contacts
2 pole 1/4 inch professional right-angle phone plug, gold contacts, black shell
4 pole female cable connector with Nickel housing and silver contacts
4 pole male receptacle, solder cups, Nickel housing, silver contacts
4 pole cable connector, chuck type strain relief, red bushing
4 pole cable connector, chuck type strain relief, yellow bushing
4 pole cable connector, chuck type strain relief, green bushing
4 pole male cable connector with black metal housing and gold contacts
4 pole cable connector, chuck type strain relief, white bushing
2 pole right-angle 1/4 inches professional phone plug, nickel contacts, black shell
4 pole male receptacle, solder cups, black metal housing, gold contacts
3 pole male receptacle, vertical PCB mount, black metal housing, gold contacts
4.4 mm (0.173 inches) tiny telefone plug bantam type, solder termination for T+R, hex crimp of S with a standard RG58 crimp tool, red plastic housing, Nickel contacts. Ideal use with TT patch panels.
3 pole female receptacle, solder contacts, black metal housing, gold contacts
4 pole male receptacle, solder cups, Nickel housing, silver contacts
4.4 mm (0.173 inches) tiny telefone plug bantam type, solder termination for T+R, hex crimp of S with a standard RG58 crimp tool, black plastic housing, Nickel contacts. Ideal use with TT patch panels.
4 pole cable connector, chuck type strain relief, dark gray bushing
Mono 1/4 inches MIL-plug (MIL-P-642/4), black metal housing, brass contacts
3 pole female receptacle, vertical PCB mount, black metal housing, silver contacts
4 pole male cable connector with black metal housing and gold contacts
4 pole cable connector, chuck type strain relief
Cablecon 4pole FXX Speakon Large
Cablecon 4pole FXX Speakon Small
5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount
3 pole female cable connector with black metal housing and gold contacts
3 pole male receptacle, vertical PCB mount, black metal housing, silver contacts
Phono chassis plug adapter, f / f, gold-plated, black
Phono chassis plug adapter, f / f, gold-plated, red
4 pole male receptacle, solder cups, black metal housing, silver contacts
4 pole male cable connector with black metal housing and silver contacts
5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, black chrome shell
3 pole male receptacle, solder cups, black metal housing, gold contacts, M3 mounting holes
4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount
Long housing module, inner thread M 17x1
3 pole male cable connector IDC B
Mono 1/4" plug module, inner thread M17x1, solder contacts
3 pole male receptacle, vertical PCB mount, Nickel housing, silver contacts
5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, black chrome shell
3 pole 1/4 inches professional phone plug, nickel contacts, nickel shell
3 pole female receptacle, solder cups, black metal housing, gold contacts
5 pole XLR female contact holder with gold-plated contacts without housing
RCA chassis socket special, red
RCA chassis socket special, black
Locking 1/4 inches phone jack, D-size shell, black plastic housing and silver contacts. The 3 pole phone jack panel mount version provides stable and secure connections where accidental disconnect or shock and vibration may occur. It latches with standard A-gauge mono or stereo plugs. Plug locks-in automatically when mating and unlocks only by pressing...
Phono socket in black chrome D-shape housing, black isolation washers, solder version
3 pole female receptacle, solder cups, black metal housing, silver contacts, M3 mounting holes
Phono socket in black chrome D-shape housing, white isolation washers, solder version
Phono socket in black chrome D-shape housing, red isolation washers, solder version
The plug2PLUG is a simple yet sophisticated plug adapter for a quick and easy con-nection of two mono TS plugs.
Phono socket in nickel D-shape housing, black isolation washers, solder version
Phono socket in black chrome D-shape housing, yellow isolation washers, solder version
Phono socket in nickel D-shape housing, red isolation washers, solder version
Phono socket in nickel D-shape housing, white isolation washers, solder version
3 pole female cable connector with black metal housing and gold contacts
1/4 inches professional right-angle phone plug, 2 pole, nickel contacts, nickel shell
5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, black chrome shell
5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount
Phono socket in nickel D-shape housing, yellow isolation washers, solder version
3 pole 3.5 mm audio plug, solder termination, chuck type strain relief, bushing, black housing, gold contacts