Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
Vertical Battery Grip Swiss Warranty. Dedicated to the FUJIFILM GFX 100 II medium format mirrorless camera, the VG-GFX100 Vertical Battery Grip benefits shooting in the vertical orientation and can effectively increase your battery life.
1 pièce (s) en stock
Battery Slide Pro V-Mount (RED Komodo)
3 pièce (s) en stock
The VLM-FX9 is a direct V-Lok fitting for Sony's FX9 camera allowing the user to use higher powered V-Lok batteries rather than BPU batteries which are the standard battery for the FX9 camera.
2 pièce (s) en stock
Wooden Camera - WC V-Mount (RED DSMC1, DSMC2)
1 pièce (s) en stock
Belt-Mount system for Vlock batteries with power output at 14.8V (nominal) and 8.4V regulated through XLR connector.
1 pièce (s) en stock
Wooden Camera - Quick Back v2
1 pièce (s) en stock
Universal harddisc recorder bracket.
1 pièce (s) en stock
Vplate - Vplate adaptor with power tap output. Provides a handy power tap connector to V-mount compatible cameras.
1 pièce (s) en stock
SmallRig V Mount Battery Adapter Plate with Adjustable Arm 3204 is designed to provide greater battery life to your camera rig via a V mount battery.
4 pièce (s) en stock
USB 3.0 + C - Power-Con (male) - 30cm
3 pièce (s) en stock
DCA5 LEMO to D-Tap Kit
6 pièce (s) en stock
Belt-Mount system for Vlock batteries with power output at only 14.8V (nominal).
4 pièce (s) en stock
SmallRig V Mount Battery Adapter Plate with Crab-Shaped Clamp 3202 is designed to provide greater battery life to your camera rig via a V mount battery.
4 pièce (s) en stock
DC-Coupler DR-E6 (5D MKII)
1 pièce (s) en stock
V-Lok - BPU Power Adaptor - LED Lighting
1 pièce (s) en stock
Adjustable ROD CLAMP for our MV METAL PLATE
3 pièce (s) en stock
This Coiled D-Tap to Sony NP-FZ100 Type Dummy Battery Cable from IndiPRO Tools allows you to power the Sony a7 III series cameras from any power source with a D-Tap input and an 11 to 19 V output. It features a built-in chip that delivers battery status to the camera indicator.
6 pièce (s) en stock
The IndiPRO Tools D-Tap to LP-E6 Dummy Battery Cable for SmallHD Monitors features a slightly modified LP-E6 dummy battery for compatibility with SmallHD monitors that accept LP-E6 batteries.
4 pièce (s) en stock
Power-Con 2-pin Plug (male) - 4-way Power-Con (female), 30cm length
7 pièce (s) en stock
D-Tap to Sony FS7, FS5, Panasonic EVA1
6 pièce (s) en stock
BLF19 Battery Eliminator - Enables Camera to be Powered from Focus Monitor
1 pièce (s) en stock
Power-con(male) - 15cm - Power-con x4 (F) Clip On (15mm)
9 pièce (s) en stock
Power-con(male) - 30cm - Power-con x4 (F) Clip On (15mm)
2 pièce (s) en stock
Atomos Locking AC Power Adaptor
2 pièce (s) en stock
Power-Con 2-pin Plug (male) - 2-way Power-Con (female), 6cm length
14 pièce (s) en stock
RA V1 V-mount battery plate is designed for SmallRig COB LED video light.
5 pièce (s) en stock
VL con block - 30cm - 4x power-con
6 pièce (s) en stock
protection contact cover (bags of 10 units)
3 pièce (s) en stock
With the Falcon Eyes Battery Adapter AD-PS1 V-Mount to F-Mount you can use two F-mount batteries (ie. NP-F batteries) on a V-mount connection.
8 pièce (s) en stock
Faux LP-E6 Lemo Adapter
5 pièce (s) en stock
5.5mm pole to 4-pin XLR connector
11 pièce (s) en stock
XTAP Plug with open ended cable, for use with appropriate accesories.
5 pièce (s) en stock
PAG D-Tap Connector for PowerHub
2 pièce (s) en stock
PAG Hirose (4-pin) Connector for PowerHub
1 pièce (s) en stock
PAG 2.1mm (PP90) Connector for PowerHub
1 pièce (s) en stock
Canon Lp-E6 To Battery Coupler
1 pièce (s) en stock
VCLX NM2, charger and 4ft charger cable package
Skypower 48V+24V output & charger v-lock, DC output: 48V/480W(max) by 4pcs16.8Vbattery, Charging output :16.8V/2Ax4
Délai habituel entre 2 et 3 semaines
MINI Skypower 48V Kit - Includes 1x FX-48D Adapter, 2x FX-HP300S Batteries, 1x PL-3680Q-D2 Fast Charger, 1x FX-BAG01 Bag and 1x DC-48AR Cable
Délai habituel entre 2 et 3 semaines
MINI Skypower 48V Output Adapter Kit - Includes 1x FX-48D Adapter, 2x BP-7S270 Batteries, 1x PL-7115-B01 Fast Charger, 1x FX-BAG01 Bag and 1x DC-48AR Cable
Délai habituel entre 2 et 3 semaines
MEGA BATTERY Inverter Kit 230V / 1500W
Délai habituel entre 2 et 3 semaines
MINI Skypower 48V Kit - 1x FX-48D Adapter, 2xFX-HP265S Batteries, 1x PL-3680Q-D2 Fast Charger, 1xFX-BAG01 Bag, 1xDC-48AR Cable
Délai habituel entre 2 et 3 semaines
D-Box (Sony Venice, V-Mount) is a custom version of our popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the Sony Venice camera
Délai habituel entre 8 et 12 semaines
D-Box (Sony Venice , Gold Mount) is a custom version of our popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the Sony Venice camera
Délai habituel entre 8 et 12 semaines
NM44 replacement cell module
D-Box Battery Bracket Sony (Venice) - Gold Mount
D-Box Battery Bracket (Sony Venice, V-Mount)
This dual-battery plate enables you to provide continuous power to your ARRI ALEXA LF, ALEXA 65, or ALEXA SXT camera plus P-Tap accessories.
ARRI Alexa LF 24V Sharkfin Battery Bracket (V-Mount).
Délai habituel entre 8 et 12 semaines
Hotswap and 24v up-convertor allowing the Alexa LF to run from standard Gold Mount Batteries. Recommended for Dionic XT batteries only
V-Mount 24V Sharkfin Battery Bracket (Arri Alexa LF)
V-Mount 24V Sharkfin Battery Bracket (ARRI Alexa 65, SXT)
Dual voltage snap-on battery belt with 4-pin & 3-pin XLR outputs. Simultaneous 14V/28V outputs. Holds two Gold Mount batteries
D-Box (Weapon/Scarlet-W/Raven, V-Mount)
Délai habituel entre 8 et 12 semaines
D-Box (Weapon/Scarlet-W/Raven, Gold Mount)
Délai habituel entre 8 et 12 semaines
The Power Splitting box provides hot-swap between two Micro Gold-Mount Batteries. The device features various industry standard accessory power connectors, as well as a 8-pin Lemo connector for battery input aimed at cables such the ARRI KC-50.
The Power Splitting box Provides hot-swap between two Micro V-Mount Batteries. The device features various industry standard accessory power connectors, as well as a 8-pin Lemo connector for battery input aimed at cables such the ARRI KC-50.
Wooden Camera - D-Box (Alexa Mini / Mini LF, V-Mount)
Délai habituel entre 8 et 12 semaines
Wooden Camera - D-Box (Alexa Mini / Mini LF, Gold Mount)
Délai habituel entre 8 et 12 semaines
The Power Splitting box is a proven battery solution featuring various industry standard accessory power connectors, as well as a 8-pin Lemo connector for battery input aimed at cables such the ARRI KC-50. A console can be attached to mount the Splitting box to standard 15mm LWS rods
The Power Splitting box is a proven battery solution featuring various industry standard accessory power connectors, as well as a 8-pin Lemo connector for battery input aimed at cables such the ARRI KC-50. A console can be attached to mount the Splitting box to standard 15mm LWS rods
The B-Mount 24V Power Splitting box is a proven battery solution featuring various industry standard accessory power connectors, as well as a 8-pin Lemo connector for battery input aimed at cables such the ARRI KC-50.
SKYTHREE - 48V DC Output Adapter Kit (1pcs SKY THREE+ 1pcs SKYB4, battery not included)
Délai habituel entre 2 et 3 semaines
SKYTHREE - 48V DC Output Adapter Kit (1pcs SKY THREEA+ 1pcs SKYB4, battery not included)
Délai habituel entre 2 et 3 semaines
Mega battery case for 3battery kit FX-mega3K
Délai habituel entre 2 et 3 semaines
26V Gold Mount Plus (Alexa LF, 65, SXT)
Délai habituel entre 8 et 12 semaines
Wooden Camera D-Box Battery Bracket (Canon C700, V-Mount)
D-Box Battery Bracket (Canon C700, Gold Mount)
This unit is designed to support the Wireless Video Transmitter WVT-1 between the camera battery adapter and the on-board battery
This unit is designed to support the Wireless Video Transmitter WVT-1 between the camera battery adapter and the on-board battery
48V DC Output Adapter V-Mount
Délai habituel entre 2 et 3 semaines
48V DC Output Adapter Gold-Mount
Délai habituel entre 2 et 3 semaines
This is a VL battery mount (small dovetail).
This is an Anton Bauer battery mount (small dovetail).
D-Box (URSA Mini, URSA Mini Pro / 12K, V-Mount)
Délai habituel entre 8 et 12 semaines
D-Box (URSA Mini, URSA Mini Pro / 12K, Gold Mount)
Délai habituel entre 8 et 12 semaines
The 26V Gold Mount Plus Plate from Anton Bauer enables you to power your ARRI ALEXA LF, ALEXA 65, or ALEXA SXT camera with a single Dionic 26V battery.
Dedicated to the FUJIFILM X-H2S mirrorless camera, the FT-XH File Transmitter Grip vastly improves the networking capabilities of the camera. It has fast Wi-Fi connectivity, with speeds up to 600 Mb/s, along with wired LAN connectivity for in-studio tethered shooting.
24 PORT 12V DC JUNCTION BOX
The D-Box from Wooden Camera is an adapter that provides power distribution, remote power on/off, and hot swap battery functions for the RED KOMODO-X cameras.
Délai habituel entre 8 et 12 semaines
The unit mounts onto the V-mount of your camera and connects to the camera via the included 9-pin EXT cable, and it provides a plate for a separately available Gold mount battery.
Délai habituel entre 8 et 12 semaines
Metal plate double VLOCK, STEP UP VOLTAGE 24V
The BAB-HG battery adapter attaches to the back of the ALEXA, ALEXA Plus, ALEXA Plus 4:3, ALEXA M body, ALEXA Studio, ALEXA HD, ALEXA HD Plus, ALEXA XT, ALEXA XT M body, ALEXA XT Plus, ALEXA XT Studio, ALEXA SXT EV, ALEXA SXT Plus, ALEXA SXT Studio, ALEXA SXT W or ALEXA LF and accepts bebob High Load ACINE on-board batteries. The BAB-HG battery adapter...
The BAB-HV battery adapter attaches to the back of the ALEXA, ALEXA Plus, ALEXA Plus 4:3, ALEXA M body, ALEXA Studio, ALEXA HD, ALEXA HD Plus, ALEXA XT, ALEXA XT M body, ALEXA XT Plus, ALEXA XT Studio, ALEXA SXT EV, ALEXA SXT Plus, ALEXA SXT Studio, ALEXA SXT W or ALEXA LF and accepts bebob High Load VCINE on-board batteries. The BAB-HV battery adapter...
12 PORT 12V DC JUNCTION BOX
A battery adapter that attaches to the back of the ALEXA 35 and accepts any 24 V power solution that can attach to the back of the ALEXA LF. The BAB-LF can also be mounted to the Power Distribution Module PDM-1 or the Audio Expansion Module AEM-1 when mounted to the back of the camera.
Quad Battery Holder for video/film application 28/14 volt output
48V / 24V DC Output Adapter V-Mount
Délai habituel entre 2 et 3 semaines
Metal plate specific for ARRI LF (step up voltage to 21V) Vlock
Metal plate specific for ARRI LF (step up voltage to 21V) 3STUD
Dedicated to the FUJIFILM GFX 50S medium format mirrorless camera, the VG-GFX1 Vertical Battery Grip benefits shooting in the vertical orientation and can also be used to effectively double your battery life.
A B-mount (device) to 3-stud (battery) step-up adapter providing regulated DC 24V, 250W capability (dependent upon battery) at greater than 95% efficiency.
BLUESHAPE has designed an efficient battery plate for the 24V B-Mount enabled devices. This converter allows a 14V High-Drain V-Lock batteries to power B-Mount enabled cameras and lights through a state of the art power converter that optimize the load on the battery with an efficiency not inferior to 95%.
Solid battery adapter made of aluminum. The Adapter Plate Mk II features a 8-pin Lemo connector for battery input aimed at cables such the ARRI KC-50
Solid battery adapter made of aluminum. The Adapter Plate Mk II features a 8-pin Lemo connector for battery input aimed at cables such the ARRI KC-50
Battery adapter for ALEXA Mini / Mini LF. The B-Mount Adapter Plate features a 8-pin Lemo connector for battery input aimed at cables such the ARRI KC-50 as well as two 2-pin Lemo accessory sockets.
Mega battery case for 2battery kit FX-mega2K
Délai habituel entre 2 et 3 semaines
Mini Skypower 48V - DC Output Adapter Kit (1pcs FX-48D + 1pcs FX-BAG01, battery not included)
Délai habituel entre 2 et 3 semaines
Mini Skypower 48V - DC Output Adapter Kit (1pcs FX-48DA + 1pcs FX-BAG01, battery not included)
Délai habituel entre 2 et 3 semaines
BMS-3, Pro Set, Gold-Mount
BMS-3, Pro Set, V-Mount
Wooden Camera - Cable-less Gold Mount (RED DSMC2)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Cable-less V-Mount (RED DSMC2)
Délai habituel entre 8 et 12 semaines
Designed to power your VENICE 2 or VENICE camera and accessories, the Battery Plate from Tilta provides you with a way to power your camera and onboard accessories from a single V-mount battery. The battery plate is designed for the Tilta Camera Cage for the VENICE cameras to provide power to the top plate.
Délai de livraison de 4 à 6 semaines
Gold Mount Plus Cradle for Preston MDR3 (26v)
Délai habituel entre 8 et 12 semaines
Mini skypower 48V output, DC output: 48V/480W(max) output by 2pcs battery, battery input: 16.8V/26V
Délai habituel entre 2 et 3 semaines
Mini Skypower 48V - DC Output Adaptert
Délai habituel entre 2 et 3 semaines
V-LOK 15MM ALEXA / HOT SWAP (LEMO)
Délai habituel entre 2 et 3 semaines
V-LOK 15MM ALEXA / HOT SWAP (XLR)
Délai habituel entre 2 et 3 semaines
The adapter features four V-mount battery plates that support Reel Power 26V batteries such as the RP-150H, RP-250N, and RP-350N.
Délai habituel entre 2 et 3 semaines
48V V-LOK - dc-dc convertor 720W
Délai habituel entre 2 et 3 semaines
V-Lock to B-Mount Adapter
Délai habituel entre 2 et 3 semaines
Attaches to the back of the Wireless Video Receiver WVR-1 and accepts Gold mount batteries. Additional 12 V accessories can be powered by two 2 pin Lemo-type power outputs
Attaches to the back of the Wireless Video Receiver WVR-1 and accepts V-lock batteries. Additional 12 V accessories can be powered by two 2 pin Lemo-type power outputs
The B-Mount Adapter ALEXA BMM-24-ALEX attaches to the back of the ALEXA, ALEXA Plus, ALEXA Plus 4:3, ALEXA M body, ALEXA Studio, ALEXA HD, ALEXA HD Plus, ALEXA XT, ALEXA XT M body, ALEXA XT Plus, ALEXA XT Studio, ALEXA SXT EV, ALEXA SXT Plus, ALEXA SXT Studio, ALEXA SXT W, ALEXA LF or ALEXA 65 and accepts B-Mount onboard batteries.
The B-Mount adapter allows 24V B-Mount batteries to power all AMIRA models.
Dual Micro V-Mount Plate to V-Mount
Dual Micro Gold Mount Plate to Gold Mount
V-Lok 15mm ALEXA hot-swap - (XLR)
Délai habituel entre 2 et 3 semaines
The VL-SV1 has been designed to meet all the demands of powering your Sony Venice camera and Sony R7 recorder.
Délai habituel entre 2 et 3 semaines
Attaches to the back of the AMIRA camera and accepts Gold mount on-board batteries. Batteries can be hot-swapped.
Attaches to the back of the AMIRA camera and accepts V-lock on-board batteries. Batteries can be hot-swapped.
D-Box Sony Rialto Power Strip with Y Cable (220", 559 cm)
Délai habituel entre 8 et 12 semaines
D-Box Sony Venice Replacement Power Strip Only.
Délai habituel entre 8 et 12 semaines
Reel Power mini 15mm Alexa - hot-swap - LEMO
Délai habituel entre 2 et 3 semaines
Gold Mount Nitro Battery Adapter Plate to Sony PXW-FX9 XDCAM 6K Full-Frame Cameras
V-Mount Nitro Battery Aadpter Plate to Sony PXW-FX9 XDCAM 6K Full-Frame Cameras
Battery Plate for Canon C500 Mk II/C300 Mk III - Gold Mount
Délai de livraison de 4 à 6 semaines
Battery Plate for Canon C500 Mk II/C300 Mk III - V Mount
Délai de livraison de 4 à 6 semaines
Gold Mount Advanced Power Distribution Module for RED Komodo - Black
Délai de livraison de 4 à 6 semaines
V Mount Advanced Power Distribution Module for RED Komodo Type I - Tactical Gray
Délai de livraison de 4 à 6 semaines
V Mount Advanced Power Distribution Module for RED Komodo Type I - Black
Délai de livraison de 4 à 6 semaines
Gold Mount Advanced Power Distribution Module for RED Komodo - Tactical Gray
Délai de livraison de 4 à 6 semaines
Use this V-mount Dual Battery Plate Cradle from Wooden Camera to power and store your Teradek Bolt LT transmitter between your camera and battery.
Délai habituel entre 8 et 12 semaines
Gold Mount Plus Cradle for Bolt 6 LT TX (26v)
Délai habituel entre 8 et 12 semaines
WC Pro Gold Mount (Canon C100, C100mkII, C300, C500).
Délai habituel entre 8 et 12 semaines
Battery Slide Pro Gold Mount (RED Komodo)
Délai habituel entre 8 et 12 semaines
Battery Slide Pro Gold Mount (Canon C70)
Délai habituel entre 8 et 12 semaines
Battery Slide Pro V-Mount (Canon C70)
Délai habituel entre 8 et 12 semaines
Battery Slide Pro Gold Mount (Sony FX6)
Délai habituel entre 8 et 12 semaines
Battery Slide Pro V-Mount (Canon C300mkIII, C500mkII)
Délai habituel entre 8 et 12 semaines
Battery Slide Pro Gold Mount (Canon C300mkIII, C500mkII)
Délai habituel entre 8 et 12 semaines
Cradle for Bolt LT TX allows you to mount the Teradek transmitter in-line with Gold or V-Mount camera-back power.
Délai habituel entre 8 et 12 semaines
Gold Mount Plus Sharkfin (26v)
Délai habituel entre 8 et 12 semaines
The cradle is dual-sided with a V-mount receiver to attach a battery and a Gold mount battery to secure to your camera, while transmitting SDI video simultaneously.
Délai habituel entre 8 et 12 semaines
Battery Slide Pro V-Mount (Sony FX6)
Délai habituel entre 8 et 12 semaines
Battery Plate with cable to be used with (1) 14.4V Gold Mount Battery. Fits on Gemini 1x1 yoke or directly on fixture.
Battery Plate with cable to be used with (1) 14.4V "V" Mount Battery. Fits on Gemini 1x1 yoke or directly on fixture.
A low-profile battery adapter that attaches to the back of the ALEXA 35 and accepts any B-Mount battery. The B-Mount Battery Adapter can also be attached to the Power Distribution Module PDM-1 or the Audio Expansion Module AEM-1 when mounted to the camera.
Dual Micro Bracket for Sony PXW-FX9 (Gold-Mount). Steps up the output to the required 19.5V DC & includes (4) P-Tap outputs.
Dual Micro Bracket for Sony PXW-FX9 (V-Mount). Steps up the output to the required 19.5V DC & includes (4) P-Tap outputs.
Snap-On Hot Swap for Arri Alexa camera
V Mount Advanced Power Distribution Module for RED Komodo Type II - Black
Délai de livraison de 4 à 6 semaines
V Mount Advanced Power Distribution Module for RED Komodo Type II - Tactical Gray
Délai de livraison de 4 à 6 semaines
Mount a larger V-mount battery on your RED V-RAPTOR with the Tilta Battery Plate to power your camera or the separately available advanced I/O module via the built-in slot. The plate includes two 14.8V 2-pin LEMO outputs, one 14.8V D-Tap output, and one USB Type-C output. The V-mount plate can be adjusted up and down within a range of 0.8".
Délai de livraison de 4 à 6 semaines
Mount a larger Gold mount battery on your RED V-RAPTOR with the Tilta Battery Plate to power your camera or the separately available advanced I/O module via the built-in slot. The plate includes two 14.8V 2-pin LEMO outputs, one 14.8V D-Tap output, and one USB Type-C output. Use of the plate keeps your rig balanced and organized.
Délai de livraison de 4 à 6 semaines
Pro Gold Mount Battery Bracket RED (DSMC1/DSMC2)
Pro V-Mount Battery Bracket RED (DSMC1/DSMC2)
Pro V-Mount Battery Bracket Canon (C100, C100mkII, C300, C500)
Pro Gold Mount Battery Bracket Canon (C100, C100mkII, C300, C500)
Use this 26V Dual Mounting Plate from Anton Bauer to power the ARRI SkyPanel S-30C at 100% maximum or the S-60C at 50% via the XLR4 connector using two 26V Gold Mount Plus batteries.
Gold Mount bracket for use with the Canon EOS C100 / C300 / C500 camera. Has (3) PowerTap outputs for accessories and can be used with the MATRIX Cheese Plate
Use this 26V Dual Mounting Plate from Anton Bauer to power the Gemini 1x1 or Gemini 2x1 with 100% maximum via the XLR3 connector using two 26V Gold Mount Plus batteries.
APPLE MAC MK3 POWER ADAPTOR "USB-C and MAGSAFE"
Délai habituel entre 2 et 3 semaines
Attaches to the back of the ALEXA - ALEXA Plus - ALEXA Plus 4:3 - ALEXA M body - ALEXA Studio - ALEXA HD - ALEXA HD Plus - ALEXA XT - ALEXA XT M body - ALEXA XT Plus or ALEXA XT Studio and accepts V-lock on-board batteries. Batteries can be hot-swapped.
This "Reel Power - Camera Fitting ALEXA attaches to the back of the ALEXA, ALEXA Plus, ALEXA Plus 4:3, ALEXA M body, ALEXA Studio, ALEXA HD, ALEXA HD Plus, ALEXA XT, ALEXA XT M body, ALEXA XT Plus, ALEXA XT Studio, ALEXA SXT EV, ALEXA SXT Plus, ALEXA SXT Studio, ALEXA SXT W or ALEXA LF and accepts Hawk-Woods 26V Reel Power on-board batteries. RP-CFA1 has...
BIT-760 Dual V Mount Battery Plate for BOLT Transmitter
Délai habituel entre 2 et 6 semaines
BIT-761 Dual Anton Bauer Mount Battery Plate for BOLT Transmitter
Délai habituel entre 2 et 6 semaines
Bolt RX Dual AB Mount Batt plate 14.4V Cable (Approx 27cm)
Délai habituel entre 2 et 6 semaines
Bolt RX Dual V Mount Batt plate 14.4V Cable (Approx 27cm)
Délai habituel entre 2 et 6 semaines
Audio Power Distribution Box - 6 x NP1 - Outputs: 4 XLR & Hirose
Délai habituel entre 2 et 3 semaines
Extend shooting time and enjoy a more comfortable grip with vertical compositions with the Panasonic DMW-BGGH5 Battery Grip for the Lumix DC-GH5 mirrorless camera
Délai habituel 6 semaines
Sony FX6 V-Mount pivoting battery plate
Sony FX6 Gold Mount pivoting battery plate
The durable aluminum plate enables you to use a high-capacity V-mount battery to power the FX6 camera or accessory, and it features a pivoting design that maintains easy access to the back of your camera. It features one D-Tap output to power the FX9 camera, and an integrated digital fuse monitors the port and disables it if a safe current is exceeded.
Battery Bracket (V-Mount)
Délai habituel entre 2 et 4 semaines
Bond Dual V-Mount Batt plate 14.4V Cable (Approx 27cm)
Délai habituel entre 2 et 6 semaines
Battery Bracket (V-Mount)
Délai habituel entre 2 et 4 semaines
Attaches to the back of the Wireless Video Receiver WVR-1 and accepts up to two Sony L-series batteries
Battery Slide Pro Gold Mount (Sony FX9)
Simple Canon Mount (RED DSMC1, DSMC2)
Délai habituel entre 8 et 12 semaines
Convert your Gold mount camera or other pro video component to use V-mount batteries with this Micro Battery Plate Adapter from Wooden Camera. Constructed from lightweight yet durable aluminum, this compact adapter features two D-Tap ports for powering accessories and a 5.8A E-fuse
Délai habituel entre 8 et 12 semaines
WC Pro V-Mount (4pin XLR Right Angle).
Délai habituel entre 8 et 12 semaines
Micro Battery Plate Adapter V-Mount to Gold Mount converts a V-Mount system to accept a Gold Mount battery. It is made from anodized aluminum which ensures both durability and secure battery mounting
Délai habituel entre 8 et 12 semaines
A V-mount micro battery plate provides unregulated 12V of power to your camera via a LEMO 3-pin connector. Two D-tap ports output 5.8A of power to compatible accessories like secondary monitors or fill lights.
Délai habituel entre 8 et 12 semaines
A Gold mount micro battery plate provides unregulated 12V of power to your camera via a LEMO 3-pin connector. Two D-tap ports output 5.8A of power to compatible accessories like secondary monitors or fill lights.
Délai habituel entre 8 et 12 semaines
The plate supports one Gold mount battery while leaving access to the camera's standard battery compartment, and it powers the camera using the included 3-pin LEMO-type connector cable.
Délai habituel entre 8 et 12 semaines
The plate supports one V-mount battery while leaving access to the camera's standard battery compartment, and it powers the camera using the included 3-pin LEMO-type connector cable.
Délai habituel entre 8 et 12 semaines
Add a high-capacity battery plate to power your Panasonic BGH1 rig with this compact Micro Battery Slide from Wooden Camera. It supports one Gold mount battery while leaving access to the camera's standard battery compartment, and it powers the camera using the included 3-pin LEMO-type connector cable.
Délai habituel entre 8 et 12 semaines
Micro V-Mount Battery Slide (Panasonic BGH1)
Délai habituel entre 8 et 12 semaines
Micro Battery Slide Pro (Blackmagic Pocket Cinema Camera 6K Pro, Gold Mount) utilizes an Anton/Bauer micro battery plate which provides unregulated 14v to a 2-Pin connector for camera power. T
Délai habituel entre 8 et 12 semaines
WC Pro Gold Mount (4pin XLR Right Angle).
Délai habituel entre 8 et 12 semaines
Micro Battery Slide Pro (Blackmagic Pocket Cinema Camera 6K Pro, V-Mount) utilizes an Anton/Bauer micro battery plate which provides an unregulated 14 Volts to a 2-Pin connector for camera power.
Délai habituel entre 8 et 12 semaines
The battery plate itself can slide up and down and be tightened in place using the attached lever for optimal placing on your rig.
Délai habituel entre 8 et 12 semaines
Adapt your RED V-RAPTOR camera for use with Gold mount batteries with this Micro Battery Plate Adapter from Wooden Camera. Constructed from lightweight yet durable aluminum, this compact adapter features two D-Tap ports for powering accessories and a 3.8A E-fuse that can be easily reset.
Délai habituel entre 8 et 12 semaines
Adapt your RED V-RAPTOR camera for use with full-sized V-mount batteries with this Micro Battery Plate Adapter from Wooden Camera. Constructed from lightweight yet durable aluminum, this compact adapter features two D-Tap ports for powering accessories and a 3.8A E-fuse that can be easily reset.
Délai habituel entre 8 et 12 semaines
Power your camera and accessories with a V-mount battery using this Micro Battery Slide Plate with Dual 15mm Dual Rod Clamp from Wooden Camera. The battery plate itself can slide up and down and be tightened in place using the attached lever for optimal placing on your rig. Two D-tap ports take power from your attached V-mount battery and deliver it to...
Délai habituel entre 8 et 12 semaines
Attaches to the top of the ALEXA - ALEXA Plus - ALEXA Plus 4:3 - ALEXA M body - ALEXA Studio - ALEXA HD - ALEXA HD Plus - ALEXA XT - ALEXA XT M body - ALEXA XT Plus or ALEXA XT Studio and accepts Gold mount on-board batteries. Batteries can be hot-swapped.
Attaches to the top of the ALEXA - ALEXA Plus - ALEXA Plus 4:3 - ALEXA M body - ALEXA HD - ALEXA HD Plus - ALEXA XT - ALEXA XT M body or ALEXA XT Plus and accepts V-lock on-board batteries. Batteries can be hot-swapped.
The strong hinge locks via a rosette and mounts through a standard 3/8-16 interface with removable anti-rotation pins. The Arri Rosette Based Hinge is not limited to the Recorder and Battery Bracket - and can be used for other purposes.
By using two batteries - one in the camera and the other in the grip - the DMW-BGS1 doubles the battery life for extended shooting.
Délai habituel 6 semaines
SHAPE V-Mount pivoting battery plate for Sony FX9
Battery Slide Pro V-Mount (Sony FX-9)
Dedicated to the Panasonic Lumix DC-S5 mirrorless camera, the DMW-BGS5 Battery Grip benefits shooting in the vertical orientation and also accepts one additional DMW-BLK22 rechargeable lithium-ion battery for extended shooting times.
Délai habituel 6 semaines
Pro V-Mount Battery Bracket Canon (C200, C200B, C300mkII)
Advanced Power Distribution Module for RED Komodo - Black
Délai de livraison de 4 à 6 semaines
Advanced Power Distribution Module for RED Komodo - Tactical Gray
Délai de livraison de 4 à 6 semaines
TERADEK BIT-787 Cube 6XX/7XX/8XX and Serv Pro Dual V Mount Battery Plate Cable (Approx 27cm)
Délai habituel entre 2 et 6 semaines
Cube 6XX/7XX/8XX and Serv Pro Dual Gold Mount Battery Plate Cable (Approx 22cm)
Délai habituel entre 2 et 6 semaines
Gold Mount pivoting battery plate for RED Komodo
V-mount pivoting battery plate for RED Komodo
Mini skypower 24V output & charger, DC output: 22V-33.3V by 2pcs 16.8V battery, Charging output :16.8V/2Ax2
Délai habituel entre 2 et 3 semaines
V-lock Plate Adapter for camera with 19mm rod, Dtap output 12V/6A
Délai habituel entre 2 et 3 semaines
Mini Skypower 24V - DC Output Adapter & Charger Gold-Mount
Délai habituel entre 2 et 3 semaines
B-lock Hot-Swap adapter
Délai habituel entre 2 et 3 semaines
Snaps on to any Gold Mount for true perpetual battery operation
The power strip provides two 12V 2-pin LEMO-type connectors, two 24V 3-pin Fischer connectors, and a D-Tap port.
Délai habituel entre 8 et 12 semaines
Dedicated to the Canon EOS R5 and EOS R6 mirrorless cameras, the BG-R10 Battery Grip offers extended shooting times as well as improved handling, especially when working in the vertical shooting orientation. The grip's design permits working with two LP-E6NH/LP-E6N/LP-E6 batteries to effectively double battery life.
Délai habituel 2 semaines
Battery Grip for the EOS 5D Mark IV Digital SLR Camera
Délai habituel 2 semaines
The kit includes a tilting battery adapter plate and a V-mount battery plate.
NP1 8-way display distribution adaptor
Délai habituel entre 2 et 3 semaines
V-Mount Battery Bracket (Alexa Mini/ Mini LF)
V-Lok 15mm Sony FX6/FX9 adaptor
Délai habituel entre 2 et 3 semaines
Sandwich adapter with 4 PowerTap connectors
Battery Grip for extended shooting time. Compatible with the LUMIX S5II (DC-S5M2), LUMIX S5IIX (DC-S5M2X) and LUMIX G9II (DC-G9M2).
Délai habituel 6 semaines
Pro V-Mount Camera Side to Gold Mount Battery Side Adapter (3x P-Tap and Digital Fuse)
Converter 26V to 14V GM+GM
Converter 26V to 14V GM+VM
Tilta Universal Battery Plate - Gold Mount
Délai de livraison de 4 à 6 semaines
Tilta Universal Battery Plate - V Mount
Délai de livraison de 4 à 6 semaines
This plate will fit directly into the original battery port of the Sony FX6 via a mechanical BPU battery fitting.
Délai habituel entre 2 et 3 semaines
V-Lok Camera Fitting (Arri Amira) 3x Power-con, 1x Lemo 2-pin
Délai habituel entre 2 et 3 semaines
Pro Gold Mount Battery Bracket Blackmagic Design (URSA Mini, URSA Mini Pro, URSA)
Pro V-Mount Battery Bracket Blackmagic (URSA Mini, URSA Mini Pro, URSA)
Pro V-Mount Battery Bracket Sony (FS7, FS5) & Panasonic (EVA1)
Pro Gold Mount Battery Bracket Sony (FS7, FS5) & Panasonic (EVA1)
V-Mount Battery Bracket RED (DSMC1/DSMC2)
Gold Mount Battery Bracket RED (DSMC1/DSMC2)
WC Pro V-Mount Camera Side to Gold Mount Battery Side Adapter (3x D-Tap and Digital Fuse).
Délai habituel entre 8 et 12 semaines
WC Pro Gold Mount Camera Side to V-Mount Battery Side Adapter (3x D-Tap and Digital Fuse).
Délai habituel entre 8 et 12 semaines
WC Pro V-Mount (BMPCC4K / BMPCC6K, Blackmagic Pocket Cinema Camera 4K / 6K)
Délai habituel entre 8 et 12 semaines
WC Pro Gold Mount (BMPCC4K / BMPCC6K, Blackmagic Pocket Cinema Camera 4K / 6K)
Délai habituel entre 8 et 12 semaines
SmallRig V-Mount Battery Plate Adapter for RED V-RAPTOR 3898 is designed to connect a large V-Mount battery to RED V-RAPTOR and power other devices if needed.
Délai habituel entre 4 et 5 semaines
Enable long-term, continuous shooting with your Nikon Z 9 mirrorless camera by pairing this EH-6D AC Adapter with a required EP-6A Power Connector. This replaces the camera's battery and has connections that allow you to power the camera from an AC outlet, extending operating time.
Gold Mount Battery Bracket Canon (C100, C300, C500)
V-Mount Battery Bracket Canon (C100, C300, C500)
The V-Mount Battery Adapter Plate from IndiPRO Tools offers a lightweight battery solution with multiple outputs to simultaneously power your Sony PXW-FX9 cinema camera as well as a variety of accessories mounted on your camera rig.
Gold Mount - Dual Mini-VL hot swap plate - 2x p-con
Délai habituel entre 2 et 3 semaines
Délai habituel entre 2 et 6 semaines
Bolt TX Single V Mount Batt plate 14.4V Cable (11in/27cm)
Délai habituel entre 2 et 6 semaines
SHAPE Gold mount pivoting battery plate for Canon C70
SHAPE V-mount pivoting battery plate for Canon C70
The bracket is compatible with the Anton/Bauer Dionic 98Wh and 240Wh batteries with 26V outputs.
Dual Micro V-Mount Bracket
Dual Micro Gold Mount Bracket
V-Lok Dual Docking Adaptor - XLR3 (24v) - XLR4 (Nom)
Délai habituel entre 2 et 3 semaines
ATOMOS SUMO - V-LOK FITTING KIT
Délai habituel entre 2 et 3 semaines
V-Lok mini hot-swap plate - (RMH bracket)
Délai habituel entre 2 et 3 semaines
V-Lok mini Canon C300 mk3, C500 mk2 camera mount - 1x d-tap
Délai habituel entre 2 et 3 semaines
B-lock adapter for RP 26V batteries
Délai habituel entre 2 et 3 semaines
V-lock mini V-Raptor dual camera fitting
Délai habituel entre 2 et 3 semaines
V-lock 15mm Canon C70 camera adaptor - 24V
Délai habituel entre 2 et 3 semaines
V-Lok Dual Docking Adaptor - 2x XLR3 (24v) 200w
Délai habituel entre 2 et 3 semaines
WC Gold Mount (RED DSMC1, DSMC2)
Délai habituel entre 8 et 12 semaines
Dual Handle Power Supply Bracket for RS 2
Délai de livraison de 4 à 6 semaines
Gold Mount with 4-pin XLR - (2) PowerTap outputs - mounts to MATRIX Cheese Plate - AJA Ki Pro Mini or many manufacturers cheese plates
Providing an elegant solution for mounting and powering your Hyperdeck shuttle, the Tilta Blackmagic Design HyperDeck Shuttle Holder secures your shuttle to a rig that includes a V-Mount battery plate and 15mm LWS rod clamps. The unit mounts to 15mm LWS support rods and features spring-loaded locking levers.
Délai de livraison de 4 à 6 semaines
V-Lok mini hot-swap plate
Délai habituel entre 2 et 3 semaines
V-Lok mini hot-swap plate - Red Camera's (1x P-con)
Délai habituel entre 2 et 3 semaines
The Hawk-Woods XE-90 dual V-Lok power adaptor is a solid stand-alone unit which has been manufactured to support Litegear equipment and offers the ability to power the majority of Litegear equipment accepting a nominal 28.8v DC input. This allows the user to greatly extend their runtimes.
Délai habituel entre 2 et 3 semaines
Bolt RX Single Female V-Mount Batt. plate 14.4V Cable
Délai habituel entre 2 et 6 semaines
Gold Mount for Sony F5/F55
Alexa Mini Gold Mount Battery Plate
Alexa Mini V-Mount Battery Plate
V-Mount bracket with clamp to mount to lighting stands
Gold Mount with clamp to mount to lighting stands
Enable long-term, continuous shooting with your Nikon Z 9 mirrorless camera by pairing this EP-6A Power Connector with a required EH-6D AC Adapter. This replaces the camera's battery and has connections that allow you to power the camera from an AC outlet, extending operating time.
Pro Gold Mount Battery Bracket (BMPCC4K / BMPCC6K, Blackmagic Pocket Cinema Camera 4K / 6K)
Pro V-Mount Battery Bracket (BMPCC4K / BMPCC6K, Blackmagic Pocket Cinema Camera 4K / 6K)
Gold Mount Battery Bracket Panasonic (GH3, GH4, GH5, GH5S, G9)
Gold Mount to Nikon (D500, D610, D750, D800, D7000, D7100, D7200, D7500, Z6, Z7) Faux Battery
Low Mode Gold Mount Battery Bracket Adapter
Gold Mount Battery Bracket (EOS R, 5D4, 6D, 70D, 7D, BMMCC, BMMSC)
V-Mount Battery Bracket (Canon EOS R, 5D4, 6D, 70D, 7D, BMMCC, BMMSC)
V-Mount to Nikon (D500, D610, D750, D800, D7000, D7100, D7200, D7500, Z6, Z7) Faux Battery
Gold Mount Battery Bracket Sony (A7, A7r, A7s, A7II, A7rII, A7sII)
V-Mount Battery Bracket Sony (A7, A7r, A7s, A7II, A7rII, A7sII)
Gold Mount Battery Bracket (Sony A9, A7rIII, Dummy FP-NZ100
V-Mount Battery Bracket (Sony A9, A7rIII, Dummy FP-NZ100)
V-Mount Battery Bracket (Panasonic (GH3, GH4, GH5, GH5S, G9)
Low Mode V-Mount Battery Bracket Adapter
BG-E22 Battery Grip
Délai habituel 2 semaines
VCLX Caddy
Power supply system for sony FS7 camera
Délai de livraison de 4 à 6 semaines
Power supply system for sony FS7 camera AB mount
Délai de livraison de 4 à 6 semaines
Preston Light Ranger 2 VOU Mounting Kit
Délai habituel entre 8 et 12 semaines
Sony F55 Camera Adaptor 14V 3x Power-Con / Anton Batts
Délai habituel entre 2 et 3 semaines
Sony F55 Camera Adaptor 14V 3x Power-Con
Délai habituel entre 2 et 3 semaines
Canon C300 MK2 Power Kit - Canon Power Cable
Délai habituel entre 2 et 3 semaines
V-Lok 15mm Canon C300 mk3, C500 mk2 adaptor
Délai habituel entre 2 et 3 semaines
Universal Plate for 15mm Rod Clamps
Durable and Compact 2x D-Tap Power Plate
Délai habituel entre 4 et 9 semaines
TERADEK Gold Mount - Male & Female Battery Plate kit for Bolt XT 1000 & 3000 Receivers
Délai habituel entre 2 et 6 semaines
TERADEK V-Mount - Male & Female Battery Plate kit for Bolt XT 1000 & 3000 Receivers
Délai habituel entre 2 et 6 semaines
Gold Mount attaches to standard VESA mounting pattern with 4p XLR
Gold Mount bracket for use with the ARRI ALEXA MINI camera. Has single PowerTap output for accessories and a 8-pin Lemo cable for camera power. Can be used with the MATRIX Cheese Plate or CINE Universal Mounting Plate
Red Gold Mount Battery Plate
Red V-Mount Batterie Plate
The plate is designed to mount onto standard 15mm LWS rods with the rod block, and it powers a camera or accessory with a 4-pin XLR power port.
Gold Mount Battery Adapter Plate with LEMO Type Cable for Canon C300 Mark II w/ 15mm Rod System (24")
The IndiPRO Tools V-Mount Plate for C300 Mark II offers punch-out screw holes and is designed to be attached to cheese plates, sold separately. It features a 12" cable with a 4-pin connector compatible with the C300 Mark II, and offers a D-Tap output supporting 12-16V accessories.
V-Mount Battery Bracket Canon (C300mkII, C200, C200B)
Pro Gold Mount Battery Bracket Canon (C200, C200B, C300mkII)
Gold Mount Battery Bracket Canon (C300mkII, C200, C200B)
Gold Mount Battery Adapter for LVM-180A / LVM-181S / LVM-172W, 173W-3G, 176W, 170A / LQM-171W / LEM-150 / XVM-175W / LVM-171A / XVM-177A / LVM-171S / LUM-171G , 181G, 181H (anton bauer)
WC Gold Mount (XLR 4 Pin)
Délai habituel entre 8 et 12 semaines
This compact Universal Micro Battery Plate from Wooden Camera supports both micro and full-size V-mount batteries.
Délai habituel entre 8 et 12 semaines
This compact Universal Micro Battery Plate from Wooden Camera supports both micro and full-size Gold mount batteries.
Délai habituel entre 8 et 12 semaines
WC V-Mount (XLR 4 Pin)
Délai habituel entre 8 et 12 semaines
WC Gold Mount (XLR-RA)
Délai habituel entre 8 et 12 semaines
WC V-Mount (XLR-RA)
Délai habituel entre 8 et 12 semaines
Battery Pack Connector for 3 Batteries
Délai habituel entre 2 et 3 semaines
Micro Plate for 15mm rod clamps
Battery Plate for Canon C200 - AB mount
Délai de livraison de 4 à 6 semaines
Battery Plate for Canon C200 - V Lock
Délai de livraison de 4 à 6 semaines
Battery Plate for Panasonic EVA1 - AB mount
Délai de livraison de 4 à 6 semaines
Battery Plate for Panasonic EVA1 - V Lock
Délai de livraison de 4 à 6 semaines
Battery Plate for BMD URSA - AB Mount
Délai de livraison de 4 à 6 semaines
Battery Plate for BMD URSA - V lock
Délai de livraison de 4 à 6 semaines
V-Lok Camera Adaptor BPU Fittings (uses 3 BP-U batteries)
Délai habituel entre 2 et 3 semaines
V-Lok Power Adaptor - Hirose 4-pin Female - Outputs: 4 Hirose & Power-Con 12V
Délai habituel entre 2 et 3 semaines
Gold Mount - Sony FS7 Camera Adaptor - 5x Power-Con
Délai habituel entre 2 et 3 semaines
V-Lok Sony FS7 Camera Adaptor - 5x Power-Con
Délai habituel entre 2 et 3 semaines
V-Lok Dual Docking Adaptor - 2x XLR4
Délai habituel entre 2 et 3 semaines
V-Lok mini Sony FS5 camera mount - 2x d-tap
Délai habituel entre 2 et 3 semaines
mini V-Lok camera mount plate for the Sony PXW-Z280
Délai habituel entre 2 et 3 semaines
V-Lok mini Z-cam 6/8k camera mount - 1x d-tap + USB + DV-BP2
Délai habituel entre 2 et 3 semaines
V-lock mini Red Komodo fitting - 2x D-Tap 1x DC Input
Délai habituel entre 2 et 3 semaines
Connects the BAT AMIRA power input to a battery power output with an XLR 3 pin connector.
The Anton Bauer Gold Mount Plus Battery Plate for ARRI ALEXA Mini allows you to power an ARRI ALEXA Mini camera with a Dionic 26V battery.
ATOMOS FLAME/INFERNO - V-LOK FITTING KIT
Délai habituel entre 2 et 3 semaines
BMCC power supply system (Gold mount)
Délai de livraison de 4 à 6 semaines
V-Lok 15mm-Bar Power Adaptor 3x Power-con / 2x Hirose (12v Regulated)
Délai habituel entre 2 et 3 semaines
V-Lok 15mm hot-swap plate - 4x d-tap
Délai habituel entre 2 et 3 semaines
Gold Mount bracket for use with the Canon EOS C300 MkII camera. Has (3) PowerTap outputs for accessories and can be used with the MATRIX Cheese Plate
Gold-Mount bracket mounts directly onto the RED KOMODO camera via the integrated BP style battery plates. Has (2) P- Tap outputs to power accessories & includes vertical and horizontal mounting options
V-Mount bracket mounts directly onto the RED KOMODO camera via the integrated BP style battery plates. Has (2) P- Tap outputs to power accessories & includes vertical and horizontal mounting options
V-Lok Camera Power Adaptor - Outputs: 2 Hirose & Power-Con 12V 35W
Délai habituel entre 2 et 3 semaines
Connects the 24 V BAT (2 pin Fischer) power input on the ArriCAM - ArriFLEX - ALEXA or ALEXA XT cameras to a battery power output with an XLR 3 pin connector.
Attaches to the back of the Wireless Video Receiver small WVR-1s and accepts V mount and Bebob VMicro batteries. Additional 12 V accessories can be powered by the 2 pin Lemo-type power output or by the twist DTAP power output. Note: Not compatible with the Wireless Video Receiver WVR-1.
Attaches to the back of the Wireless Video Receiver small WVR-1s and accepts Gold mount and Bebob AMicro batteries. Additional 12 V accessories can be powered by the 2 pin Lemo-type power output or by the twist DTAP power output.Note: Not compatible with the Wireless Video Receiver WVR-1.
Mounts instantly to XDCam HD - XDCam EX - SX - Digital Betacam - Hi-Definition camcorders and IMX cameras
Mounts instantly to XDCam-SD and HD - DSR Series DVCAM - HVR-S270U and SRW9000 camcorders
Gold Mount for Arri LoCaster light
Gold Mount for Panasonic DVC PRO and P2 cameras
Panasonic GH Series power supply system-V lock
Délai de livraison de 4 à 6 semaines
This V-Mount Battery Plate from IndiPRO Tools enables you to mount a V-mount battery on your RED EPIC or SCARLET camera.
Indipro V-Mount Multi-Output Plate w/ 15mm Rod Mount for RED KOMODO
V-Mount bracket for use with the Canon EOS C300 MkII camera. Has (3) PowerTap outputs for accessories and can be used with the MATRIX Cheese Plate
TERADEK Bolt XT/LT Single V Mount Batt Plate 14.4V
Délai habituel entre 2 et 6 semaines
TERADEK Bolt XT/LT Single AB Mount Batt Plate 14.4V
Délai habituel entre 2 et 6 semaines
V-Mount Battery Bracket Sony (FS7, FS5) & Panasonic (EVA1)
Gold Mount Battery Bracket Sony (FS7, FS5) & Panasonic (EVA1)
V-Mount Battery Bracket Blackmagic Design (URSA Mini, URSA)
Universal Metal VPLATE with 2 Dtap outputs + 1 USB output 5V + Btap multivoltage selectable 5V- 7,4V - 12 V
Battery Grip BG-E14
Délai habituel 2 semaines
Cineo Maverick V-Lock Battery Adapter
Cineo Maverick A/B Gold Mount Battery Adapter
DSLR power supply system (15mm rod adaptor) Gold mount
Délai de livraison de 4 à 6 semaines
DSLR power supply system (15mm rod adaptor) V lock
Délai de livraison de 4 à 6 semaines
Wooden Camera - Battery Slide
Délai habituel entre 8 et 12 semaines
V-mount plate for Canon C300 mark ii
Plate Adapter for LED light, Control two battery discharge in turn. Standard DC output cable: B01-DCH3?D-tap to XLR 3pin female?, length 60cm
Délai habituel entre 2 et 3 semaines
This Tilta DSLR Battery Plate with 19mm Adapter (AB Lock) is designed to allow for external power on DSLR and mirrorless cameras. The battery plate comes with a DC Female to Canon LP-E6 which is then connected to an 8V DC cable that plugs into the plate to provide your camera with power.
Délai de livraison de 4 à 6 semaines
Micro V-Mount Bracket with P-Tap & Lemo
Micro Gold Mount Bracket with P-Tap & Lemo
SHAPE V-mount pivoting battery plate for Atomos Shogun 7 cage
Power your camera and a variety of accessories from a single high-capacity V-mount battery with the Multi D-Tap V-Mount Battery Plate with 15mm LWS Rod Mount from SHAPE. The battery plate provides a V-mount for a single V-mount battery and four 14.4V, 10A regulated D-Tap outputs.
V-Lok Power Adaptor - 5 Power-Con Outputs (12V Regulated)
Délai habituel entre 2 et 3 semaines
Universal Cheese Plate for use with 15/19mm Rod Clamp Kits
V-Lok 15mm-Bar Power Adaptor 3x Power-con / 2x Hirose
Délai habituel entre 2 et 3 semaines
V-Lok 15mm hot-swap plate - 4x d-tap, 1x usb
Délai habituel entre 2 et 3 semaines
Battery Plate for Sony FX6 Type II - Gold Mount
Délai de livraison de 4 à 6 semaines
Battery Plate for Sony FX6 Type II - V Mount
Délai de livraison de 4 à 6 semaines
Battery Plate to DJI Ronin Power Pass-through Plate Kit - Gold Mount
Délai de livraison de 4 à 6 semaines
Battery Plate to DJI Ronin Power Pass-through Plate Kit - V Mount
Délai de livraison de 4 à 6 semaines
Plate Adapter for LED light. Get 20-33.6V output from two 14.8v batteries. Standard DC output cable: B01-DCH3?D-tap to XLR 3pin female?, length 60cm
Délai habituel entre 2 et 3 semaines
Power your Panasonic Lumix DC-S1H from a V-Mount battery using this V-Mount Plate. The plate features a Panasonic DMW-BLJ31 type dummy battery at the end of an integrated 24" cable.
Gold Mount Battery Adapter Plate to Panasonic DMW-BLJ31 Type Dummy Battery (24")
Battery Plate for Sony FX9 Type II - Gold Mount
Délai de livraison de 4 à 6 semaines
Battery Plate for Sony FX9 Type II - V-Mount
Délai de livraison de 4 à 6 semaines
PAG PowerHub for Gold Mount System
Gold Mount Bracket for Sony FS7 Camera
Plate for ARRI Skypanel, get 24V output by 2xV-lock battery, with one pc 50cm DC-30H(XLR 4pin male to XLR 4pin female)
Délai habituel entre 2 et 3 semaines
Reg. NP1 Adaptor - Hirose 4-pin Male - 4 Ouputs Switched 9-12V
Délai habituel entre 2 et 3 semaines
V-Mount Plate w/ 15mm Rod Mount for RED KOMODO (Dual D-Tap Outputs)
Preston MDR2 V-Lock Accessory Mount Kit
Délai habituel entre 8 et 12 semaines
Gold Mount for Panasonic 17 inches monitor models BT-LH-1710/1760
Addresses any monitors or other portable equipment that have a Sony Wedge Mount adapter
For the JVC TM-910SU/1010SU/550PU/600PN and Panasonic BTS-100Y/1000N portable colour monitors.
The DV-KOM fits directly onto the RED Komodo battery fitting plate to the rear of the camera. DV-KOM requires two NPF batteries to be fitted to enable power out.
Délai habituel entre 2 et 3 semaines
DV Fitting - Hirose 4-pin Male 4 Hirose Outputs
Délai habituel entre 2 et 3 semaines
The NPC-TA4 is fitted with a TA4 connector suited for the Sound Devices Scorpio and also features four switched auxiliaries (Hirose sockets). These outputs are fused and a low battery voltage indicator fitted.
Délai habituel entre 2 et 3 semaines
PAG Adapts Gold Mount for V-Mount batteries
PAG Adapts V-Mount for Gold Mount batteries
Connects the BAT AMIRA power input to a battery power output with an XLR 3 pin connector.
Connects the 24 V BAT (2 pin Fischer) power input on the ArriCAM - ArriFLEX - ALEXA or ALEXA XT cameras to a battery power output with an XLR 3 pin connector.
BG-E21 Battery Grip for EOS 6D Mark II
Délai habituel 2 semaines
T Platefix on v-lock camers to hang 2pcs BP batteries
Délai habituel entre 2 et 3 semaines
T Platefix on gold-mount camera to hang 2pcs AN batteries
Délai habituel entre 2 et 3 semaines
Universal Plate with stand holder
MVPLATE IP 65 rated IN METAL
V-Lok mini - Atomos Inferno
Délai habituel entre 2 et 3 semaines
NP1 Adaptor - Hirose 4-pin Male - 4 Ouputs Switched
Délai habituel entre 2 et 3 semaines
NP1 Adaptor - XLR 4-pin Female - 4 Ouputs Switched
Délai habituel entre 2 et 3 semaines
NP1 Adaptor - Hirose 4-pin Female - 4 Ouputs Switched
Délai habituel entre 2 et 3 semaines
Gold Mount Battery Bracket BMPCC4K (Blackmagic Pocket Cinema Camera 4K)
V-Mount Battery Bracket Blackmagic Design (Pocket Cinema Camera 4K)
V-mount plate for Canon C100/C300/C500
Universal Metal VPLATE with 2 Dtap outputs + 1 USB output 5V
Micro V-Mount Bracket with P-Tap & USB
Micro Gold Mount Bracket with P-Tap & USB
Ensemble adapter battery
Use this L-Bracket Battery Plate to power select Teradek units using widely available Sony L-Series or Canon LP-E6 type batteries.
Délai habituel entre 2 et 6 semaines
Battery Plate - Gold-Mount (Female)
Délai habituel entre 2 et 6 semaines
TERADEK Gold Mount Battery plate (female) for Bolt XT 1000/3000 RX
Délai habituel entre 2 et 6 semaines
TERADEK V-Mount Battery plate (female) for Bolt XT 1000/3000 RX
Délai habituel entre 2 et 6 semaines
DC-Coupler DR-E19
Délai habituel 2 semaines
The IndiPRO Tools V-Mount Plate with NP-FZ100 Dummy Battery and 15mm Rod Clamps for Sony a7 III features power regulation in the V-mount plate and a magnetic choke on the 20"" cable to deliver clean power to your camera.
Universal compact Gold Mount Bracket with two P-taps
Gold Mount Battery Adapter Plate with Sony NP-FZ100 Type Dummy Battery (24")
This V-mount battery plate features a 10A fuse and mounts onto a separately available mounting plate. It can be used to power a camera, light, or accessory using its 13.8" long 4-pin XLR connector.
PAG V-Mount Camera Plate (4 x D-Tap, 1 x USB output)
XLR charging cable for VCLX 2 charger
BIT-755 Battery Plate for Panasonic VW-VBG6
Délai habituel entre 2 et 6 semaines
The NPC-TA4 is fitted with a TA4 connector suited for the Sound Devices Scorpio and also features four switched auxiliaries (Hirose sockets). These outputs are fused and a low battery voltage indicator fitted.
Délai habituel entre 2 et 3 semaines
The NPC-TA4 is fitted with a TA4 connector suited for the Sound Devices Scorpio and also features four switched auxiliaries (Hirose sockets). These outputs are fused and a low battery voltage indicator fitted.
Délai habituel entre 2 et 3 semaines
V-Mount Battery Plate with Multiple Output Ports and 15mm Rod Adapter
V-Mount Battery Plate with 15mm Rod Mount with Coiled Cable for BMPCC 4K/6K (18-40")
Gold Mount Battery Plate with 15mm Rod Mount with Coiled Cable for BMPCC 4K/6K (18-40")
Add V-Mount battery support to compatible cameras with this dedicated V-Mount Plate from IndiPRO Tools. It connects to the camera using an NP-FW50 dummy battery at the end of a 24" cable, and attaches to your rig via a 15mm LWS rod bracket provided on the bottom.
Add V-Mount battery support to compatible cameras with this dedicated V-Mount Plate from IndiPRO Tools. It connects to the camera using an LP-E6 dummy battery at the end of a 24" cable, and attaches to your rig via a 15mm LWS rod bracket provided on the bottom.
Use the V-Mount Battery Plate with 15mm Rod Mount for BMPCC 4K/6K from IndiPRO Tools to power your Blackmagic Pocket Cinema Camera 4K or 6K with a longer-lasting V-mount battery.
Add V-Mount battery support to 4-pin XLR cameras and devices with this V-Mount Plate from IndiPRO Tools.
Gold Mount Battery Adapter Plate for Blackmagic Pocket Cinema Camera 4K/ 6K w/ 15mm Rod System (16")
Gold Mount Battery Adapter Plate with Sony L-Series Type Dummy Battery (24")
V-Mount Battery Adapter Plate with Nikon EN-EL15 Type Dummy Battery w/ 15mm Rod System (24")
V-Mount Battery Adapter Plate with Sony L-Series Type Dummy Battery w/ 15mm Rod System (24")
Gold Mount Battery Adapter Plate with Sony NP-FW50 Type Dummy Battery (24")
Gold Mount Battery Adapter Plate for Blackmagic 4K Cinema Camera w/ 15mm Rod System (24")
Gold Mount Battery Adapter Plate with Canon LP-E6 Type Dummy Battery (24")
Gold Mount Battery Adapter Plate with Pansonic DMW-BLF19 Type Dummy Battery (24")
Gold Mount Battery Adapter Plate with Nikon EN-EL15 Type Dummy Battery (24")
V-Mount Battery Adapter Plate for Blackmagic 4K Cinema Camera w/ 15mm Rod System (24")
V-Mount Battery Adapter Plate with Pansonic DMW-BLF19 Type Dummy Battery (24")
Gold Mount Battery Adapter Plate with 4-Pin Neutrik XLR Connector (24")
Universal compact Gold Mount Bracket with Digital Run-time functionality
Micro V-Mount Bracket with Dual P-Taps
Universal compact Gold Mount Bracket with Analog and Digital Run-time functionality
Micro V-Mount Bracket
Micro Gold Mount Bracket with Dual P-Taps
V-Mount Battery Bracket (Dual P-Tap)
Gold Mount Battery Bracket (Dual P-Tap)
BIT-752 Battery Plate for Canon BP-970
Délai habituel entre 2 et 6 semaines
BIT-753 Battery Plate for JVC BN-V438U
Délai habituel entre 2 et 6 semaines
BIT-754 Battery Plate for Panasonic CGA-D54
Délai habituel entre 2 et 6 semaines
BIT-756 Battery Plate for Sony M Series
Délai habituel entre 2 et 6 semaines
BIT-758 Battery Plate for Sony B Series
Délai habituel entre 2 et 6 semaines
Battery plate for Canon LP-E6 or Sony NP-F550 (Straight Bracket) with 2pin Power Cable
Délai habituel entre 2 et 6 semaines
The pack contains a Sony NP-FW50 dummy battery adapter, an L-series battery kit with interchangeable plugs, 3' and 12" micro-HDMI cables, a micro-HDMI to HDMI adapter, a 20" battery adapter extension cable, and a cleaning cloth.
Délai habituel entre 4 et 9 semaines
Gold Mount Plate for 702 Touch & Cine 7
Délai habituel entre 4 et 9 semaines
Dual Canon BP to V Mount Adapter Battery Plate for RED Komodo - Black
Délai de livraison de 4 à 6 semaines
Dual Canon BP to Gold Mount Adapter Battery Plate for RED Komodo - Tactical Gray
Délai de livraison de 4 à 6 semaines
Dual Canon BP to Gold Mount Adapter Battery Plate for RED Komodo - Black
Délai de livraison de 4 à 6 semaines
Dual Canon BP to V Mount Adapter Battery Plate for RED Komodo - Tactical Gray
Délai de livraison de 4 à 6 semaines
Power your RED KOMODO with an optional V-mount battery using this tactical gray Dual Canon BP to V-Mount Adapter Battery Plate for RED KOMODO from Tilta.
Délai de livraison de 4 à 6 semaines
Power your RED KOMODO with an optional V-mount battery using this black Dual Canon BP to V-Mount Adapter Battery Plate for RED KOMODO from Tilta.
Délai de livraison de 4 à 6 semaines
Power your DJI Video Transmitter along with your camera with this Gold mount Power Supply Module from Tilta. The power module consists of a battery plate and a camera-side plate that mount on either side of the DJI Video Transmitter.
Délai de livraison de 4 à 6 semaines
Power Supply Module for DJI Video Transmitter - Gold Mount Type II
Délai de livraison de 4 à 6 semaines
Power your DJI Video Transmitter along with your camera with this V-mount Power Supply Module from Tilta. The power module consists of a battery plate and a camera-side plate that mount on either side of the DJI Video Transmitter.
Délai de livraison de 4 à 6 semaines
SafeTap Connector for RED Epic/Scarlet Power Cable (24", Non-Regulated)
V-Lok Small HD 703 Monitor Fitting - 1x Power-Con
Délai habituel entre 2 et 3 semaines
V-Lok Small HD 503 Monitor Fitting - 2x Power-Con
Délai habituel entre 2 et 3 semaines
Adapter Vlock battery for SONY EX1R
Adapts any Gold Mount to accept a standard 4p XLR connector
NANO V-Mount Plate for RED Komodo
Délai habituel entre 2 et 3 semaines
NANO V-Mount Plate for Sony PXW-FX9
Délai habituel entre 2 et 3 semaines
NANO V-Mount Plate for Sony FX6
Délai habituel entre 2 et 3 semaines
Battery Plate for Sony FX6 - V Mount
Délai de livraison de 4 à 6 semaines
Battery Plate for Sony FX6 - Gold Mount
Délai de livraison de 4 à 6 semaines
SmallRig V Mount Battery Adapter Plate (Basic Version) with Extension Arm 3499 is designed to provide greater battery life to your camera rig via a V mount battery.
Délai habituel entre 4 et 5 semaines
Adjustable bracket to hold either a Gold or V-mount plate
Sony BPU Fitting - Hirose 4-pin Male 2 Hirose Outputs
Délai habituel entre 2 et 3 semaines
Cable Assy 3 Pin XLR to ALEXA 35 (8 pin Lemo)
V-Lok Power Adaptor - 5 Power-Con Outputs
Délai habituel entre 2 et 3 semaines
Tool-less LCD/EVF Adapter (Weapon/Scarlet-W/Raven)
Délai habituel entre 8 et 12 semaines
Case for Mini Skypower
Délai habituel entre 2 et 3 semaines
Double Plate. Instantly converting Gold Mount to V-Mount without disassembling or changing the battery, Can be used on the charger with Gold Mount to charge V-Mount battery
Délai habituel entre 2 et 3 semaines
Double Plate. Instantly converting V-Mount to Gold Mount without disassembling or changing the battery, Can be used on the charger with V-Mount to charge Gold Mount battery.
Délai habituel entre 2 et 3 semaines
Single Plate Adapter for LED light, Standard DC output cable: B01-DCH3?Dtap to XLR 3pin female?, length 60cm
Délai habituel entre 2 et 3 semaines
This kit features a folding baseplate with a Manfrotto 501-type quick release plate on the base and a V-lock plate on the back that can fold down 180° to fold out of the way of the camera rear.
Délai habituel entre 4 et 5 semaines
The V-mount Battery Adapter Plate from IndiPRO Tools provides unregulated 12V power (12 to 16V depending on battery connected) through a D-Tap connector on the plate.
Gold Mount Battery Adapter Plate with D-Tap Output and 15mm Rod System
V-Mount To Gold Mount Regulated Battery Converter
Sony-L Series Battery Bracket for 703 Bolt
Délai habituel entre 4 et 9 semaines
Power Extension RED Komodo (120", Outward Right Angle)
Délai habituel entre 8 et 12 semaines
WC V-Mount (Dual D-Tap)
Délai habituel entre 8 et 12 semaines
DV Fitting - Hirose 4-pin Male 2 Hirose Outputs 12V
Délai habituel entre 2 et 3 semaines
4-pin Connector Right Angle to 4-pin Connector Cable
Délai habituel entre 2 et 6 semaines
The PAG-6001 can be used to charge smartphones and notebooks. The adapter is plugged into the D-Tap socket on the top of the battery and secured with a 1/4" screw.