Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
Add accessories to the left side of your RED KOMODO or KOMODO-X cinema camera with this Left Side Plate from Wooden Camera.
Délai habituel entre 8 et 12 semaines
The 8" Accessory NATO Safety Rail from Wooden Camera is designed to mount onto the front cage, rear cage, or optional 18" NATO safety rail for the Fujinon Duvo 25-1000mm box lens.
Délai habituel entre 8 et 12 semaines
The plate incorporates seven 1/4"-20 mounting threads with ARRI-style anti-twist divots to mount extensions, top handles, and more.
Délai habituel entre 8 et 12 semaines
The durable aluminum plate features four 3/8"-16 and two 1/4"-20 anti-twist accessory mounting threads for mounting accessories such as rods, extensions, or lens accessories.
Délai habituel entre 8 et 12 semaines
Lens Belt-Nylon belt with 4-inch & 7-inch Lens Cups, Black
Délai habituel entre 8 à 10 semaines
With theBPA-2 attached - ALEXA - ALEXA Plus - ALEXA Plus 4:3 - ALEXA M body - ALEXA XT - ALEXAXT Plus - ALEXA XT Mbody or adapter plate for Canon EOS C100 /300 /500 can be attachedto a traditional Arri cine-style bridge plate - including theBP-3 - 5 - 8 or 9. Attaches to the front foot of these cameras. Not needed on ALEXA Studio and ALEXA XT Studio.
Sony FX9 Top plate
The RMB-5 attaches to the Wireless Video Receiver WVR-1, allowing ,ounting to diameter19mm rod, such as in the Director's Monitor Support DMS-1
Single Support Rods 540 mm, black (21.3 inch), diameter 19 mm
One pair diameter 15 mm - stainless steel - lightweight
The Wooden Handgrip is known from ARRI´s SXU-1. Compatible with Sony Venice Ext. Unit Side Bracket (left and right).
Tiltaing Adjustable Top Handle - Tactical Gray
Délai de livraison de 4 à 6 semaines
Finished in a Tactical gray color, the Tiltaing Adjustable Top Handle Plus is designed to attach to a rosette on the top side of a Tilta camera cage.
Délai de livraison de 4 à 6 semaines
Finished in a black color, the Tiltaing Adjustable Top Handle Plus is designed to attach to a rosette on the top side of a Tilta camera cage.
Délai de livraison de 4 à 6 semaines
Clamping base 30k, Opening 40mm, 80x30x 45 mm, 2 x M8 with plastic jaw
Délai de livraison 4 semaines
Tiltaing Adjustable Top Handle -Black
Délai de livraison de 4 à 6 semaines
Shoulder pad standard for base plate Sony PXW-FS7 MKII
19mm Tube Clamp with Center Screw Channel
Délai habituel entre 8 et 12 semaines
Add a compact top handle to your camera cage or rig using the 4.3" Mini Top Handle from Wooden Camera. This lightweight handle mounts on your rig via a captive 3/8"-16 screw with detachable ARRI-standard, anti-twist locating pins. The versatile screw mount is attached with an easy-to-use thumbwheel, and it can be further tightened using a flat head...
Délai habituel entre 8 et 12 semaines
Unified VCT Shoulder Foam Only
Délai habituel entre 8 et 12 semaines
LW 15mm Adapter V2 (19mm)
Délai habituel entre 8 et 12 semaines
Unified Baseplate Lower Quick Dovetail
Délai habituel entre 8 et 12 semaines
Preston MDR3 / MDR4 Ultra Arm Ball
Délai habituel entre 8 et 12 semaines
Unified Lens Adapter Support Kit
Délai habituel entre 8 et 12 semaines
Wooden Camera - Rosette Spacer Standoff (Large)
Délai habituel entre 8 et 12 semaines
UVF Mount (ARRI Rosette, Adapter Only)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Rosette Spacer Standoff (Small)
Délai habituel entre 8 et 12 semaines
Euro Adapter Safety Plate for Under Slung ( M12)
Euro Adapter Safety Plate for Under Slung ( 1/2"-13)
Elemack/euro Starter(M12)-black
Attaches to the bottom of the front foot of ALEXA - ALEXA Plus - ALEXA Plus 4:3 - ALEXA M body - ALEXA XT - ALEXA XT M body or ALEXA XT Plus. With the WA-1 attached - the camera can be attached to Arri - SONY or Panasonic video-style quick release plates. Not compatible with ALEXA Studio or ALEXA XT Studio.
This kit includes 3.9, 2.4, and 1.6" long movable accessory rails that can mount onto separately available Wooden Camera Accessory plates using the included low-profile captive screws.
Délai habituel entre 8 et 12 semaines
Super Knuckle Hex Pin With 1/4"-20 Camera Plate
Universal Action Camera Suction Cup (4.5") Mounting Kit
Délai de livraison de 4 à 6 semaines
Mitchell Male to Euro Adapter
Canon C200 Adapter Plate
The HEX-3 is part of ARRI´s Handle Extension Family. It follows the design of the Camera Center Handle CCH-4 and offers a number of 3/8-16 and RMB-3 interfaces. The different HEX can be connected in multiple ways in order to extend a top handle but also to build your own handle design.
The Accessory Rail Small shares the same rail interface as the SMB and the LMB Accessory Adapter. Two ball-pressure pieces on each side of the rail prevent an attached Accessory Rail Bracket ARB-1 from slipping off
The HEX-2 is part of ARRI´s Handle Extension Family. It follows the design of the Camera Center Handle CCH-4 and offers a number of 3/8-16 and RMB-3 interfaces. The different HEX can be connected in multiple ways in order to extend a top handle but also to build your own handle design.
Top Plate For Sony Fs7.
The Shape Paparazzi Riser is a camera riser that can be placed either parallel or perpendicular to the camera support, which enables raising the camera directly above the camera support or offset to the right or to the left.
Top Plate for Sony FS5
Ball Head with Ajustable 15mm Rod Bloc Lightweight
Panasonic Au-Eva1 Adaptor Pate
15MM LW ROD BLOC WITH 15MM TOP CLAMP
Elemack/euro Starter(M12)
Elemack Starter
LWS Camera Platform for DSLR cameras (e.g. Canon EOS 5D MKII and Nikon D90) incl. twist stopper for combination with LWS Baseplate 401-400
V-Lock Base Station and Wedge Kit (ARRI Accessory Mount 3/8-16)
Délai habituel entre 8 et 12 semaines
One pair diameter 19 mm, stainless steel, lightweight
Vision Lock Quick Release Mounting Set
Bolt-On Accessory Rail Clamp (Mini)
Délai habituel entre 8 et 12 semaines
5"lightweight dovetail plate
Délai de livraison de 4 à 6 semaines
Top Handle for Canon C200
Délai de livraison de 4 à 6 semaines
DSLR Shoulder Rig 15mm Rods to ?"-20 Support Bracket
Délai de livraison de 4 à 6 semaines
RED DSMC2 Shim Plate for ARRI Standard Bridge Plate 15/19 MM Studio
Canon C500 Mark II adapter plate
The 577CNCQR Quick Release Assembly from SHAPE gives you the freedom to remove the camera from your rig or other piece of camera support equipment without having to unscrew it every time.
Viewfinder Adapter With Arri Standard 3/8-16 Interface Male
SHAPE EVF adapter shoe for Canon and Sony
The new and upgraded focus wheel is equipped with motors that features ultra-low latency and high precision.
Universal Quick Release Plate For Crane M3
Carrying handle for CustomCage - fits in all directions on top and aside. Inclides short (19 mm) 3/8 inches screw for mounting.
Rear Rod Clamp for Light Weight Support 401-EVA1
Separate 15 mm viewfinder adapter for Canon EOS C200 top handgrip
Center Bracket for SunShade for use on Light Weigth Support
Rear Rod Clamp for Light Weight Support 401-FS7 and 401-FS5 (for Sony PXW-FS7 and PXW-FS5)
Cold Shoe Rail accepts devices comming with a flash plate connector. Such as MagNum equipped with the flash connector MN-RMB1, ALADI MK II Broadcast and many other. Comprses two 1/4" srews for mounting on the Universal Accessory Bridge for 15mm and 19mm rods with QuickFit lock (401-49-000) or on any othe Chrosziel accessory bridges and the Custom Cage
Accessory bridge 15mm special for CustomCage w. 3/8 inches screw and anti-twist insert - double sided rod clamping.
1 pair Rosettes for Locking-Bars of CustomCage
1 pair Rosettes for Corners of CustomCage
Connector Plate (1 pair) for CustomCage - 24x30 mm with each 4 threads and screws to connect each two Locking-Bars.
MultiPad 15 Side Lock - for sideward off set of camera in connection with MultPad 15 Straight (5030-02).
Handle Bar plus proVideo (w. 220mm) - for use with LWS. With clamp fordiameter 15mm rods
LWS Camera Platform LWS JVC GY-HM 100 E for combination with LWS Baseplate 401-400
LWS Camera Platform Sony HDR-FX1/ HVR-Z1/PMW-EX1/HVR-Z7 for combination with LWS Baseplate 401-400
LWS Camera Platform for Panasonic AG-3DA1 - HVX-200 - Canon XF-305 / XF-300 for combination with LWS Baseplate 401-400
Round Rod-Clamp 15 mm, One-Hand-Clamp for accessories with diameter 22 mm. For example hand grip, battery adaptor and recorder adaptor (projected)
Accessory bridge 15mm w 3/8 inches and 1/4 inches insert - double sided clamping
Rod diameter 19mm x 440mm length for Bridge Plate
VariTube - telescopic rods (1 pair) for Lightweight support diameter 15mm - adjustable length from 150 up to 230 mm.
Rod diameter 15mm - length 310mm - set of 2 rods
DV Balancer Camera Adaptor - for mounting the camera if no Chrosziel LightWeight Support of series 401- 4xx is in use
LWS Camera Platform Panasonic AG-AF100 for combination with LWS Baseplate 401-400
Connection Plate
19mm carbon rods. Length: 4.7in, diameter 19mm. TRINITY 2, ARTEMIS 2
Tiltaing Lightweight Quick Release Top Handle - Black
Délai de livraison de 4 à 6 semaines
Tiltaing Lightweight Quick Release Top Handle - Tilta Gray
Délai de livraison de 4 à 6 semaines
Tiltaing Lightweight Quick Release Top
Délai de livraison de 4 à 6 semaines
Quick Release Top Handle - Tilta Grey
Délai de livraison de 4 à 6 semaines
Tiltaing Lightweight Quick Release Top Handle with Arri Locating Pins - Tactical Gray
Délai de livraison de 4 à 6 semaines
Tiltaing Lightweight Quick Release Top Handle - Black
Délai de livraison de 4 à 6 semaines
TILTAING Quick Release Handle - Black version
Délai de livraison de 4 à 6 semaines
Quick Release Top Handle
Délai de livraison de 4 à 6 semaines
Cinefactory - Angle 3D
Designed to reduce the strain on your arms when using the DJI RS 2, RSC 2, RS 3, RS 3 Pro, or RS 3 Mini, this kit includes an adjustable sling handle, weight-reducing adjustable shoulder strap, and a baseplate.
Délai habituel entre 4 et 5 semaines
15mm clamping block
The Wooden Handgrip for RED V-RAPTOR and KOMODO Side Brackets from Vocas is a handgrip designed specifically for the RED V-RAPTOR and KOMODO cameras
Long Rod Support Bracket (15mm Studio)
Délai habituel entre 8 et 12 semaines
Securely fasten your onboard monitor to your camera or camera cage using this Tilting Monitor Hinge Kit from Wooden Camera.
Délai habituel entre 8 et 12 semaines
Short Tabs for DSMC2 LPL Mount using ARRI Top Plate
Délai habituel entre 8 et 12 semaines
Long Rod Support Bracket (19mm)
Délai habituel entre 8 et 12 semaines
Wooden Camera - 19mm Rod Clamp to ARRI Rosette
Délai habituel entre 8 et 12 semaines
ARRI Accessory Mount to 19mm Rod Clamp
Délai habituel entre 8 et 12 semaines
19mm Rod Clamp to ARRI Accessory Mount
Délai habituel entre 8 et 12 semaines
15mm Rod Clamp to ARRI Accessory Mount
Délai habituel entre 8 et 12 semaines
Wooden Camera - 15mm Rod Clamp to ARRI Rosette
Délai habituel entre 8 et 12 semaines
ARRI Accessory Mount to 15mm Rod Clamp
Délai habituel entre 8 et 12 semaines
4" Suction Cup Camera Mount Kit for Vehicle Shooting
Délai habituel entre 4 et 5 semaines
This is a set of two Vocas Cage Rosette adapters for the Vocas USBP-19, USBP-15D, and BP-18 baseplates. These baseplates feature designated places for them.
2" Coupler With Located Pin & Universal Gimbal Mount Adapter
This pair of Shape 19mm Aluminum Rods (12") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 19mm rods.
Add extra leverage and accessories to your DJI Ronin 4D gimbal with this Top Handle from Tilta. The handle mounts on top of the Ronin 4D using four screws, and it provides multiple 1/4"-20 and 3/8"-16 anti-twist accessory threads. It also features mounting points for an optional cable clamp to protect your rig's cabling.
Délai de livraison de 4 à 6 semaines
Blackmagic URSA Mini Pro Shim Kit
Using the included screws, this accessory attaches to a 3/8"-16 ARRI-style, anti-twist accessory mount, ensuring a solid, twist-free connection.
Pro Support Base Plate for 15mm Pro Rail Supports
This bracket fits on the side of the RED KOMODO, either at the left or right side. With Arri style rosette, two 1/4" and two 3/8" threaded holes.
Shape's C300 Plate Adapter fits directly and precisely underneath the Canon C300 camera to add to its bottom more threaded holes for mounting tripods and various rigs.
The Shape 11" Magic Arm is a multipurpose and flexible option for attaching accessories such as a small monitor, lights, microphones, etc. to your camera.
15MM ROD BLOC FOR BP SERIES
Straight handgrip 15mm rail bracket
Mitchell Threaded Collar W/counter Sunk Through Hole
Quick Release Safety Pin for Arri Wcu-4
Front Box Bracket
ULS Rolling Y Bracket
Délai habituel entre 8 et 12 semaines
Single Support rod made of hard-coated Aluminum, black
UVF v2 L Bracket
Délai habituel entre 8 et 12 semaines
Wooden Camera - 19mm Rod (24 inches)
Délai habituel entre 8 et 12 semaines
Wooden Camera - 15mm Rod (24 inches)
Délai habituel entre 8 et 12 semaines
Mount an accessory such as a monitor, phone, tablet, light, or microphone onto your rig with this NATO Monitor/Phone Combo Bracket from FREEFLY. The L-shaped bracket is designed as a standard NATO rail from end to end, and it features numerous 1/4"-20 anti-twist threads along the rail.
Wooden Camera - LW 15mm Adapter
Délai habituel entre 8 et 12 semaines
NATO Lock Kit
Délai habituel entre 8 et 12 semaines
Wooden Camera - UVF Mount (NATO Jaws Only)
Délai habituel entre 8 et 12 semaines
DSMC2 EVF Mounting Plate w/ 1/4-20 and 3/8-16 ARRI Mount
Délai habituel entre 8 et 12 semaines
Cable protector / Side Cheese plate for Sony PMW-F5/F55
Mitchel Threaded Collar W/ Counter Sunk Hole
Mitchell Threaded Collar
Mitchell Castle Nut
Super Knuckle for Amaran F21c & & F22c With T10 Spanner
Ronin 2 Dual Tb50 Battery Mount Adapter
HDMI Lock System for ATOMOS NINJA V 5'' Monitor Recorder
Support bridge for cheese plate Sony PMW-F5/55 using AXS-R7 recorder
Tiltaing Left Side Wooden Handle Type IV - Tactical Gray
Délai de livraison de 4 à 6 semaines
Tiltaing Left Side Wooden Handle Type IV - Black
Délai de livraison de 4 à 6 semaines
Tiltaing Right Side Wooden Handle Type IV - Tactical Gray
Délai de livraison de 4 à 6 semaines
Tiltaing Right Side Wooden Handle Type IV - Black
Délai de livraison de 4 à 6 semaines
Top Handle for Sony FX6
Délai de livraison de 4 à 6 semaines
Tilta Float System Bottom Counterweight Bracket
Délai de livraison de 4 à 6 semaines
Add this Universal EVF Swivel Arm from Wooden Camera to your EVF system to add more swivel adjustment to your EVF. The lightweight arm features a 15mm rod with a safety cap on one side, and on the other side is a NATO rail that is compatible with the Universal EVF Accessory Rail Swivel Clamp.
Délai habituel entre 8 et 12 semaines
The Universal 15mm EVF Rail Extension from Wooden Camera is a 5.2" long NATO rail suitable for use with any NATO clamp, including the EVF System components.
Délai habituel entre 8 et 12 semaines
7.5"X 10" Rectangle Cheeseplate (Aluminum)
Strut Channel Adapter With Coupler for 2" Tube
Base plate adapter for JVC
Adjustable NATO Rail Extender Arms
Délai de livraison de 4 à 6 semaines
Nucleus Nano 15mm single rod mounting baseplate for BMPCC 4K/6K camera
Délai de livraison de 4 à 6 semaines
Multi-Function Top Plate - Tilta Grey
Délai de livraison de 4 à 6 semaines
RONIN 2 adapter mount for TAM-C01
Délai de livraison de 4 à 6 semaines
Multi-Function Top Plate for BMPCC 4K/6K-Black version
Délai de livraison de 4 à 6 semaines
Multi-Function Top Plate
Délai de livraison de 4 à 6 semaines
The SHAPE Belt XL is a waist belt designed to support the weight of a shoulder rig. An optional SHAPE Telescopic Support Arm is required to prop up your rig. The Support Arm installs into loops at the front.
Side Mount Bracket
Arri 3/8" Locating Pin to Arri Arri Rossette (M6) Adapter
Suction Cup With3/8-16 Thread Stud
Suction Cup With Fixed Baby Pin
6'' Suction Cup With Fixed Baby Receiver
Super Knuckle W/ Super Claw Clamp
This support mounts onto the Arca Riser for KOMODO-X and supports the RF to LPL mount adapter so it doesn't rotate or flex, keeping it solid and secure.
Délai habituel entre 8 et 12 semaines
The lightweight arm features a 15mm rod with a safety cap on one side, and on the other side is a NATO rail that is compatible with the Universal EVF Accessory Rail Swivel Clamp.
Délai habituel entre 8 et 12 semaines
The Universal 15mm EVF Rail Extension from Wooden Camera is a 5.2" long NATO rail suitable for use with any NATO clamp, including the EVF System components.
Délai habituel entre 8 et 12 semaines
This support mounts onto the Arca Riser for KOMODO-X and supports the RF to LPL mount adapter so it doesn't rotate or flex, keeping it solid and secure.
Délai habituel entre 8 et 12 semaines
The durable aluminum plate is compatible with the Wooden Camera Accessory Kit series of mounts, and it provides 1/4"-20 and 3/8"-16 anti-twist threads for mounting optional 15mm clamps, Mini Accessory Rails, hinge systems, or extensions.
Délai habituel entre 8 et 12 semaines
Attaches to the bottom of the back foot of ALEXA - ALEXA Plus - ALEXA Plus 4:3 - ALEXA M body - ALEXA XT - ALEXA XT M or ALEXA XT Plus. Prevents the camera from resting on a back mounted battery when placed on a flat surface. Not needed on ALEXA Studio or ALEXA XT Studio.
This support mounts onto the Arca Riser for KOMODO-X and supports the RF to LPL mount adapter so it doesn't rotate or flex, keeping it solid and secure.
Délai habituel entre 8 et 12 semaines
Lens Mount Shim Set (Round)
Délai habituel entre 8 et 12 semaines
Recorder Slide L Bracket Only
Délai habituel entre 8 et 12 semaines
This heavy-duty suction cup features a 6" diameter, and it supports payloads up to 176 lb horizontally and up to 132 lb vertically.
Délai habituel entre 4 et 5 semaines
Capable of attaching to your camera cage with a simple "click", this SmallRig Snap-On Quick Lock NATO Top Handle offers a topside handgrip with additional mounting spots for your rig.
Délai habituel entre 4 et 5 semaines
Monitor Cage for SmallHD Focus
Délai habituel entre 4 et 5 semaines
Table top base , 150 mm diameter, for 1 articulated arm M8
Délai de livraison 4 semaines
Table top base , 150 mm diameter, for 1 articulated arm M6
Délai de livraison 4 semaines
This pair of Shape 19mm Aluminum Rods (10") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 19mm rods.
CINE7 Grab Arm
Délai habituel entre 4 et 9 semaines
The Shape 7" Magic Arm is a multipurpose and flexible option for attaching accessories such as a small monitor, lights, microphones, etc. to your camera.
The SHAPE Sliding Rod Block allows you to attach 15mm rods to select SHAPE gear and adjust them vertically to support different sized lenses and accessories.
The SHAPE 2.75" Sliding Rod Bloc allows you to attach 15mm rods to select SHAPE gear and adjust them vertically 2.75".
The SHAPE RODSUP4 Rod Bloc with Threads features 1/4-20 and 3/8-16 threaded holes underneath that are used to attach components such as Magic Arms and Spigots.
This smaller rubber pad mounts on the Type R rod support using the included screws. It provides a softer, cushioned rest on your shoulder so you can support your camera rig more comfortably during long shoots.
Compact holder for small devices such as SSDs, video converters etc etc. Iincluding rubber straps to mount to a 1/4" thread hole.
Director's monitor cage accessory bracket
Body rosette adapter for Sony PXW-FS7 / FS7 II
Stainless steel rosette spacer 13 mm
Thumbrest TR-XE4 Black
Thumbrest TR-XE4 Silver
Shapelini Clamp 3'' End/Center Jaw (Black)
Mounting Bracket for Universal Suction Cup (4.5")
Délai de livraison de 4 à 6 semaines
1-1/8"(28mm) Junior Pin Cheeseplate Adapter (3/8"-16)
The HEX-1 is the shortest part of ARRI´s Handle Extension Family. It follows the design of the Camera Center Handle CCH-4 and offers 3/8-16 and RMB-3 interfaces. The different HEX can be connected in multiple ways in order to extend a top handle but also to build your own handle design.
Movcam Side Support
19mm Studio Clamp For Top Plate
NATO clamp 1/4" and 3/8"
NATO clamp cold shoe
NATO clamp horizontal rosette
The Safety Arm from Wooden Camera is a NATO-standard side-mounting arm designed for use with RED EPIC and SCARLET cameras.
Délai habituel entre 8 et 12 semaines
Rubber Coated Magnet Midi Ball Head & a 1/4"-20 M
4.5'' Suction Cup With 3/8''-16
Mount your iPhone onto your camera rig with the Tablet Clamp Mount from FREEFLY. The aluminum mount features an adjustable clamp that fits all iPhones with just about any case size, and it features multiple 1/4"-20 anti-twist threads on the base to mount it onto a rig or camera mount.
Add this Hook-and-Loop Expansion Plate to your Wooden Camera Quick Release Top Plate to increase the amount of mounting space for hook-and-loop accessories on your Sony VENICE 2 camera.
Délai habituel entre 8 et 12 semaines
Add this Hook-and-Loop Side Expansion Plate to the right side of your Wooden Camera Quick Release Top Plate to increase the amount of mounting space for hook-and-loop accessories on your Sony VENICE 2 camera.
Délai habituel entre 8 et 12 semaines
Create a handle that best suits your Sony VENICE series camera rig using this 1" Ultra Handle Extension from Wooden Camera thanks to its modular design. A 3/8"-16 screw on one end of the extension can attach it to separately available connectors or other extension pieces.
Délai habituel entre 8 et 12 semaines
The SHAPE Delta Adapter plate mounts underneath your camera and allows for attachment to the SHAPE Quick Release Plate or third party plates that use the V-lock interface.
Extention Unit ? 19:15mm (distance hole center 82mm) - no rod included
Extention Unit ? 19:15mm, with short rod ? 15mm
Locking-Bar black (1 pair) for CustomCage.
Extention Unit ? 15:15mm (distance hole center 60mm) - no rod included
Extention Unit ? 15:15mm, with short rod ? 15mm
Mini Wedge Plate LWS (w 1/4 Inch screw), for use with QuickLock Plate (401-130) in combination with light weight support series 401-45x, 401-46x, 401-4xx
Extention Unit ? 15:15mm (distance 82mm) with short rod ? 15mm
Locking-Bar l. 35mm (1 pair) Black Edition for CustomCage - extends cage by 35 mm.
Locking-Bar red (1 pair) for CustomCage - extends cage by 35 mm.
Locking-Bar l. 50mm (1 pair) Black Edition for CustomCage - extends the cage by 50 mm.
Locking-Bar gold (1 pair) for CustomCage - extends the cage by 50 mm.
Locking-Bar l 70mm (1 pair) Black Edition for CustomCage - extends the cage by 70 mm.
Locking-Bar blue (1 pair) for CustomCage - extends the cage by 70 mm.
Base Pate (spare) for CustomCage includes 1/4 inches and 3/8 inches screws.
Table top base with rubber pad , 100 mm diameter, for 1 articulated arm M8
Délai de livraison 4 semaines
Table top base with rubber pad, 100 mm diameter, for 3 articulated arm M6
Délai de livraison 4 semaines
Grow your rig with a variety of accessories using the Dogbone-Style Bracket with 3/8"-16 ARRI-Style Mount & 15mm Rod Clamp from Vocas.
V-lock base plate
Can be mounted onto any 1/4" industry standard hole.
3" Suction Cup With 1/4" - 20 Thread
3'' Suction Cup W/ 16mm Baby Pin
Half Ball Converter (75mm)
Tiltaing Cooling System - Black
Délai de livraison de 4 à 6 semaines
Tilta Float System Monitor Bracket
Délai de livraison de 4 à 6 semaines
Tiltaing Right Side Wooden Handle - Black
Délai de livraison de 4 à 6 semaines
Tiltaing Right Side Wooden Handle - Tactical Gray
Délai de livraison de 4 à 6 semaines
Tiltaing Left Side Wooden Handle - Black
Délai de livraison de 4 à 6 semaines
Tiltaing Right Side Wooden Handle - Tilta Gray
Délai de livraison de 4 à 6 semaines
Tiltaing Left Side Wooden Handle - Tilta Gray
Délai de livraison de 4 à 6 semaines
Tiltaing Rotatable Top Handle - Black
Délai de livraison de 4 à 6 semaines
Tiltaing Rotatable Top Handle - Tactical Gray
Délai de livraison de 4 à 6 semaines
Tiltaing Left Side Wooden Handle - Tactical Gray
Délai de livraison de 4 à 6 semaines
Cold shoe to 15 mm adapter
Quick Release Clamp
The lightweight aluminum holder features a 15mm rod port that secures with a locking lever.
Blackmagic Studio camera adapter plate
RED Komodo Side NATO Bracket
Délai habituel entre 8 et 12 semaines
The durable aluminum plate is compatible with the Wooden Camera Accessory Kit series of mounts, and it provides 1/4"-20 and 3/8"-16 anti-twist threads for mounting optional 15mm clamps, Mini Accessory Rails, hinge systems, or extensions.
Délai habituel entre 8 et 12 semaines
Unified DSLR 15mm Baseplate (Lower Dovetail Only)
Délai habituel entre 8 et 12 semaines
Wooden Camera - 15mm Rod (18 inches)
Délai habituel entre 8 et 12 semaines
19mm Rod Clamp to Hot Shoe Mount
Délai habituel entre 8 et 12 semaines
15mm Rod Clamp to Hot Shoe Mount
Délai habituel entre 8 et 12 semaines
Universal Offset Bracket
Délai habituel entre 8 et 12 semaines
Wooden Camera - 19mm Rod (18 inches)
Délai habituel entre 8 et 12 semaines
Mount a variety of accessories onto your camera rig using this 3.5 x 2" Bolt-On Accessory Plate from Wooden Camera.
Délai habituel entre 8 et 12 semaines
his heavy-duty suction cup features a 4" diameter, and it supports payloads up to 110 lb horizontally and up to 77 lb vertically. It is designed to mount on a flat surface and features wear-resistant construction.
Délai habituel entre 4 et 5 semaines
The Shape Belt is a professional video accessory specially designed for all camera supports used with the Telescopic Support Arm.
Arri Monitor Bracket for Wcu-4
This pair of Shape 15mm Aluminum Rods (18") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods.
The Shape Counter Weight is a professional video accessory that augments stability of a camera support by balancing or counterweighing the camera at the rear.
Shape's Rod Block for Paparazzi attaches to a Shape Paparazzi to enable it to mount 15mm rods and to adjust along their length.
Support Strap with Rubber Padding
Articulating arm ROCKY with 2-step central clamp, with 1/4" thread and cold shoe adapter L. 150 mm, weight 158 gr., payload 3 kg. The central clamp first fixes the articulation and second the ball pivot. The 90° slot is rotating and can be fixed
Weebill 2 Sling Grip Handle
82 mm Foot for the top handgrip Pro
Super Knuckle With Dia. 26mm Self-tapping Ball Screw for Trail Camera Mount
1/4" quick release for Noga arm
This pair of Shape 19mm Aluminum Rods (8") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 19mm rods.
19mm long rail supporter
Délai de livraison de 4 à 6 semaines
This pair of Shape 15mm Aluminum Rods (14") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods.
Compact aluminum Side Handle for Blackmagic Cinema Camera cage.
One single support rod (not pair), 90mm long (3.5''), diameter 19 mm, stainless steel, lightweight.
The EasySling handle for Zhiyun Crane 3S enables versatile ways of holding the gimbal.
Strut Channel Adapter 5/8"Male Pin
Wooden Camera - 15mm Rod (15 inches)
Délai habituel entre 8 et 12 semaines
Wooden Camera - 19mm Rod (15 inches)
Délai habituel entre 8 et 12 semaines
Quick Release Safetypin With Key Chain & Spring Hook
This pair of Shape 15mm Aluminum Rods (12") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods.
Universal Accessory Hinge & Clamp (3/8"-16 Male, 3/8"-16 Female)
Délai habituel entre 8 et 12 semaines
The Large aluminum plate measures 5 x 5" and features multiple M2.5 threads around the sides for mounting onto the Wooden Camera Mini Accessory Rails.
Délai habituel entre 8 et 12 semaines
Universal Single 15mm Rod Clamp with 3/8"-16 Anti-Twist Screw Mount
Délai habituel entre 8 et 12 semaines
This Cable Clamp for Sony FX9 Remote Handle from SHAPE provides strain relief for your FX9's handgrip cable, helping to prevent accidental disconnections
Multi-purpose clamp, M6 thread, 50 mm
Délai de livraison 4 semaines
Sony FX9 rear insert plate
Rear Operating Handle
Délai de livraison de 4 à 6 semaines
Secure this tactical gray Tilta Multifunctional NATO Top Handle to a compatible camera cage for increased comfort while shooting handheld and expanded mounting options. A NATO clamp attaches the cheese plate-style handle to your camera cage. Multiple anti-twist 1/4"-20 threads allow you to mount a fill light or external monitor. One cold shoe mount can...
Délai de livraison de 4 à 6 semaines
This adapter enables you to relocate the original Sony FX6 handgrip when using an extension arm or to add a rosette-based accessory to the FX6's rosette mount.
Rapid Connect Adapter With Sliding Mounting Plate
Constructed from the same aircraft-grade aluminum as the PYXIS camera body, this versatile plate provides a rosette mounting option to facilitate the mounting of handgrips or extension arms.
PL Mount Shim Kit
Canon C200/C300 MK II Power to PTAP Cable
Délai de livraison de 4 à 6 semaines
Aluminium bracket with additional Quick Release Mount. Including 1x Aluminium Bracket with 1/4 screw; 1x Aluminium Quick Release Mount with 3 screws; 1x Allen key for assembly; 1x Slot Screwdriver with bottle opener
Délai habituel entre 4 et 6 semaines
Shoulder pad for F55 baseplate
Délai de livraison de 4 à 6 semaines
Indicated to hold a plate or a sheet up to 4 mm thickness
Délai de livraison 4 semaines
Camera Tie Down Knob W/ 3/8" Male Thread
Stand Bag for 161mb
Use this Wooden Camera D-Box Extension Bracket to properly attach your D-Box power strip to the back of your Sony VENICE Rialto 2. The bracket is specifically designed to accommodate the updated Rialto 2 form factor.
Délai habituel entre 8 et 12 semaines
The durable aluminum plate is compatible with the Wooden Camera Accessory Kit series of mounts, and it provides 1/4"-20 and 3/8"-16 anti-twist threads for mounting optional 15mm clamps, Mini Accessory Rails, hinge systems, or extensions.
Délai habituel entre 8 et 12 semaines
Ultra Arm Double Ball (8 inches)
Délai habituel entre 8 et 12 semaines
Offset Mount for Bolt 4K LT TX is a streamlined and versatile bracket designed for mounting the Teradek Bolt 4K LT TX in up to six different positions via a single captive 1/4"-20 screw.
Délai habituel entre 8 et 12 semaines
Ultra Arm Ball (NATO Rail)
Délai habituel entre 8 et 12 semaines
Ultra Arm Ball (NATO Clamp)
Délai habituel entre 8 et 12 semaines
Separate right hand rosette for Sony Alpha 7 bracket
The SHAPE Rod Block attaches components to standard 15mm camera support rods.
The SHAPE Swivel Rod Clamp is an articulated part that mounts to 15mm rods.
This pair of Shape 15mm Aluminum Rods (10") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods.
The Shape Counter Weight is a professional video accessory that augments stability of a camera support by balancing or counterweighing the camera at the rear.
The SHAPE Quick Release Plate Adapter gives you the freedom to remove your camera from your tripod, stabilizer, or support rig without having to detach it from the plate.
Live Desktop Camera Bracket DT-50
Délai habituel entre 4 et 5 semaines
SmallRig ARRI Locating Side Handle 4016 is designed to facilitate camera movement and stabilize dual-handed shooting while providing basic mounting points.
Délai habituel entre 4 et 5 semaines
Carry your camera or perform low-angle shots using this Adjustable Top Handle with ARRI-Style Anti-Twist Mount from SmallRig. The handle uses a locking 3/8"-16 thumbscrew with locating pins to attach securely to your camera cage.
Délai habituel entre 4 et 5 semaines
SmallRig Attachable VND Filter Kit ND2-ND32 (1-5 Stop) 52mm 4215 contains two CPLs, stacked and rotated to reduce the amount of light, thereby balancing the exposure time. Its inner polarizer magnetically mounts to the SmallRig filter adapter ring via a bottom locating ring, whereas the outer polarizer can be rotated via an aluminum alloy ring at 1-5 stop...
Délai habituel entre 4 et 5 semaines
Arca-Swiss type bottom plate and side plate, for fast switch horizontal and vertical in tripod shooting mode
Délai habituel entre 4 et 5 semaines
SmallRig L-Bracket for Nikon Z 8 3942 is designed to facilitate a switch between horizontal and vertical modes and to improve grip experience.
Délai habituel entre 4 et 5 semaines
This handle offers a right- or left-side mounting with additional accessory mounting points for your rig. It mounts onto your cage using the switchable 1/4"-20 or 3/8"-16 screw with ARRI-style locating pins to prevent twisting.
Délai habituel entre 4 et 5 semaines
Attach this SmallRig Side Handle with Arca-Type Clamp Adapter to the left or right side of your camera cage for improved handheld shooting.
Délai habituel entre 4 et 5 semaines
Multi-Functional Top Plate for Sony FX6
Délai de livraison de 4 à 6 semaines
Tiltaing Compact NATO Top Handle with Nato Rail Kit - Black
Délai de livraison de 4 à 6 semaines
This pair of Shape 19mm Aluminum Rods (6") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 19mm rods.
Dia. 26 Mm Ball With 1/4"-20 Camera Plate
TH-G3 Counter Weight for balancing
Délai habituel entre 2 et 3 semaines
SHD DualShoe Assembly
Délai habituel entre 4 et 9 semaines
Stainless steel rod 19x600mm
Délai de livraison de 4 à 6 semaines
Shoulder belt offers the compatible with standard ENG shoulder belts
Rod diameter 15mm - length 310mm
U-Clamp for Light Weight Support
Extension Rods diameter 15mm (set of 2) - length 190 mm for LWS.
Corner (spare) for CustomCage - in total 90° - short leg 30° - long leg 60° for optimum match to the camera's shapes.
Dia. 26mm Ball With Nato Clamp
Flat base plate for USBP-15F
Flat base plate for USBP-15
15Mm Lw Clamp For Top Handle
The Medium aluminum plate measures 5 x 3" and features multiple M2.5 threads around the sides for mounting onto the Wooden Camera Mini Accessory Rails.
Délai habituel entre 8 et 12 semaines
The Small plate measures 4.1 x 1.6" and features a 3/8"-16 anti-twist screw.
Délai habituel entre 8 et 12 semaines
The plate mounts onto the top rear of the ALEXA 35, expanding the optional middle and front plates and providing additional mounting points for accessories on the top and sides.
Délai habituel entre 8 et 12 semaines
UVF Threaded Rod Only
Délai habituel entre 8 et 12 semaines
This cheese-style plate mounts on the back of a separately available battery plate and provides M2.5, 1/4"-20, and anti-twist 3/8"-16 threads for attaching accessories, quick release systems, and articulated arms.
Délai habituel entre 8 et 12 semaines
NATO Lock (Rail Only)
Délai habituel entre 8 et 12 semaines
Komodo Revolva Riser
Délai habituel entre 8 et 12 semaines
Top Plate Only (RED Komodo, ARCA Swiss)
Délai habituel entre 8 et 12 semaines
One single support rod (not pair), 90mm long (3.5''), diameter 19 mm, stainless steel, lightweight
NATO Lock (Clamp Only)
Délai habituel entre 8 et 12 semaines
Wooden Camera - 19mm Rod (12 inches)
Délai habituel entre 8 et 12 semaines
Wooden Camera - 15mm Rod (12 inches)
Délai habituel entre 8 et 12 semaines
The Shape Pair of 15mm Female - Female Rod (8") are anodized aluminum rods with 1/2"-13 threaded female extremities.
The TransMount phone holder with crown gear is compatible with the CRANE 3 LAB and WEEBILL LAB.
Quick Release Hot Shoe Rail Mount for HDR Monitors
Délai habituel entre 4 et 9 semaines
SSD drive universal aluminum duck station clamp
SHAPE's Nucleus Handle Clamp Relocator is a single-piece aluminum bracket designed for the handgrip of the Tilta Nucleus-M lens control system. It allows you to attach the Tilta handgrip to the frames of the various SHAPE push-button handgrip sets, such as the SHAPE Quick Handles or Telescopic Handles.
Stainless steel rod 19x500mm
Délai de livraison de 4 à 6 semaines
Stainless steel rod 19x550mm
Délai de livraison de 4 à 6 semaines
0.8 mm Pitch 43 Teeth Aluminum Gear for FFPRO
Made of durable aluminum, this Arca-Swiss type plate sports non-slip cork pads on top and includes both 1/4"-20 and 3/8"-16 screws for mounting on your camera.
The cheese-style Center-Adjusting Top Handle from SmallRig mounts easily onto a standard NATO rail and can slide back and forth up to 3.1" to help balance your camera rig, facilitate low-angle shots, and provide multiple accessory mounts.
Délai habituel entre 4 et 5 semaines
The LLS-1 Pin is part of the Lightweight Lens Support LLS-1 and can be separately purchased if lost.
NATO Slider on Top Plate
Monitor Mounting Bracket
Délai de livraison de 4 à 6 semaines
Carry and stabilize your Tiltaing camera cage with the black Tiltaing Compact NATO Top Handle from Tilta. This compact quick release top handle is smaller than the standard Tiltaing quick release handle and well suited for use with smaller cameras or when a smaller shooting package is desired. There is one shoe mount on top and multiple 1/4"-20 and...
Délai de livraison de 4 à 6 semaines
Carry and stabilize your Tiltaing camera cage with the titanium gray Tiltaing Compact NATO Top Handle from Tilta. This compact quick release top handle is smaller than the standard Tiltaing quick release handle and well suited for use with smaller cameras or when a smaller shooting package is desired.
Délai de livraison de 4 à 6 semaines
Manfrotto Quick Release Extender Plate
Délai de livraison de 4 à 6 semaines
Tiltaing Adjustable Cold Shoe Phone
Délai de livraison de 4 à 6 semaines
Tiltaing Adjustable Cold Shoe Phone
Délai de livraison de 4 à 6 semaines
1/4"20 Camera Plate With Baby Reveiver
SmallRig Tripod Head Quick Switch Clamp with Plate (Small, Arca-Swiss style) KDBC2469 is designed for quickly switching from different types of tripod head depending on the portability, stability and load requirements.
Délai habituel entre 4 et 5 semaines
This pair of 6" black 15mm Extensions Rods features one male end and one female end, each with 1/2"-13 threading. The rods are composed of lightweight anodized aluminum for strength and durability.
Offset V-Lock Wedge (Screw Slot and ARRI Mount 3/8-16)
Délai habituel entre 8 et 12 semaines
This support bracket provides a long handle to prevent flexing or shifting.
Délai habituel entre 8 et 12 semaines
Mount for Bolt 4K LT TX is a compact mounting bracket designed for the Teradek Bolt 4K LT TX to integrate seamlessly onto your camera via one captive 1/4"-20 screw in up to six different positions.
Délai habituel entre 8 et 12 semaines
Universal Ultra Arm Ball (Combo 1/4-20 & 3/8-16)
Délai habituel entre 8 et 12 semaines
Aluminium Bracket with 15 Rod Support, 1x Aluminium Bracket with 1/4 screw
Délai habituel entre 4 et 6 semaines
Ultra Arm Clamp (Double Ball)
Délai habituel entre 8 et 12 semaines
Director's Monitor Cage v2 (Handle Bracket Only)
Délai habituel entre 8 et 12 semaines
Ultra Arm Ball (Female Hot Shoe)
Délai habituel entre 8 et 12 semaines
Ultra Arm Double Ball (5 inches)
Délai habituel entre 8 et 12 semaines
WC Lens Adapter Foot (1/4-20)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Shoe Handle Mount
Délai habituel entre 8 et 12 semaines
Universal Gimbal Mount Adapter
This pair of Shape 15mm Aluminum Rods (8") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods.
Rear Insert Plate For Sony Fs7.
The Shape Back Pad is a professional video accessory that weighs 0.35 lb (0.160 kg) and offers augmented camera support stability and comfort. Padded on one side, the pad is attached to the shoulder rig via a screw knob.
Metabones Adaptor for Sony FS5
The Bolt-On Rosette from Wooden Camera is an ARRI-standard rosette that attaches to your camera cage or rig via a 1/4"-20 anti-twist mount.
Délai habituel entre 8 et 12 semaines
Light guide holder
Délai de livraison 4 semaines
Designed for the FUJIFILM XF 100-400mm f/4.5-5.6 R LM OIS WR and XF 50-140mm f/2.8 R LM OIS WR lenses, the MLP-75XF Metal Lens Quick Release Plate is an Arca-type compatible plate for mounting one of these telephoto lenses to a tripod head.
This pair of Shape 19mm Aluminum Rods (4") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 19mm rods.
1-7/8" (O.d.) 48mm X10"(250mm) Long Aluminum Tube W/ Double
Add a rod clamp to your 15mm rig to mount your follow focus using this 15mm Rod Clamp from SmallRig. The durable aluminum clamp features two 15mm rod ports, and the distance between them is adjustable to accommodate different size lenses up to 114mm when using a follow focus system.
Délai habituel entre 4 et 5 semaines
SmallRig L-Shape Grip for Nikon Z fc (Black) 4263 is designed to provide a comfort grip.
Délai habituel entre 4 et 5 semaines
Designed for both action cameras and smartphones thanks to its included mounting accessories, this SC-1K Portable Suction Cup Mount Kit from SmallRig attaches to flat surfaces using a durable suction cup and adjustable magic arm. A buckle latch installs the suction cup with a single press to clean, flat surfaces, and has a static load capacity of 2.2 lb.
Délai habituel entre 4 et 5 semaines
The handle secures to your gimbal with a NATO clamp and features a locking knob to adjust its angle.
Délai habituel entre 4 et 5 semaines
SmallRig L-Shape Grip for FUJIFILM X-T5 (Black) 4260 is designed to improve your grip on the camera.
Délai habituel entre 4 et 5 semaines
Customize your camera rig using this 5" Wooden Camera 15mm Bolt-On Rod 1/4"-20. This matte black accessory rod uses built-in locating pins for secure mounting.
Délai habituel entre 8 et 12 semaines
Build a customized camera rig with the help of the 5" Wooden Camera 15mm Bolt-On Rod with 3/8"-16 Mount. This matte black accessory rod uses built-in locating pins for secure mounting and enables you to attach lens motors, handgrips, and other rod-mounted accessories.
Délai habituel entre 8 et 12 semaines
Customize your camera rig for accessory mounting with the help of the 5" Wooden Camera 19mm Bolt-On Rod with 3/8"-16 Mount. This matte black rod uses built-in locating pins for secure mounting and enables you to attach lens motors, handgrips, and other rod-mounted accessories.
Délai habituel entre 8 et 12 semaines
C-Clamp for table or tubes 80 x 30 x 40 mm
Délai de livraison 4 semaines
Light guide holder
Délai de livraison 4 semaines
This pair of Tilta Quick Adjust Rosette Adapter from Tilta outfits you with one right-side adapter and one left-side adapter for your Tilta rig or DJI gimbal rosettes. The adapters feature dual mounts to attach to your rosette of your choice and compatible handle. An adjustment lever allows you to rotate your mounted handle without loosening any screws.
Délai de livraison de 4 à 6 semaines
15mm Single Rod Mounting Baseplate for 95mm Lens
Délai de livraison de 4 à 6 semaines
F970 Battery Plate
Délai de livraison de 4 à 6 semaines
Stainless steel rod 19x450mm
Délai de livraison de 4 à 6 semaines
15mm Lightweight Rod Mounting Frame Baseplate for 114mm Lens
Délai de livraison de 4 à 6 semaines
This pair of 4" black 15mm Extensions Rods features one male end and one female end, each with 1/2"-13 threading. The rods are composed of lightweight anodized aluminum for strength and durability.
Kaiser range of screws and threads
This pair of Shape 15mm Aluminum Rods (6") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods.
Connecting plate for Accessory bridge 15mm on LWS 401-93 and 401-94
Flash Shoe for CustomCage - incl. 1/4 inches screw and pin head screw and adaptor w. 3/8 inches thread.
Rod for lightweight support - diameter 15mm - length 128mm (f. DP)
Rod for lightweight support - diameter 15mm - length 160mm
Rod for lightweight support - diameter 15mm - length 150mm
Rod for lightweight support - diameter 15mm - length 114mm (f. DV)
Wooden Camera - 15mm Rod (9 inches)
Délai habituel entre 8 et 12 semaines
Wooden Camera - 19mm Rod (9 inches)
Délai habituel entre 8 et 12 semaines
Light guide holder
Délai de livraison 4 semaines
Screwdriver
Arri Rossette Bolt-on Mount(M6)
Arri Rossette Bolt-on Mount (1/4"-20)
Dia. 3/4" Balance Stud (Set of 2)
Support your right wrist and arm when hand-holding your gimbal with this Wrist Support from SmallRig.
Délai habituel entre 4 et 5 semaines
A perfect addition to your Lite Zhiyun Transmount Mini Dual Grip is now even more stable in the hand and videos over a longer period of time are easier than before.
The 1" cube features a 3/8"-16 male screw with anti-twist pins on one side for mounting on a cage or rig, and its five remaining sides feature 3/8"-16 female threads with anti-twist divots.
Délai habituel entre 8 et 12 semaines
The cube features a 1/4"-20 male screw with anti-twist pins on one side for mounting on a cage or rig, and its five remaining sides feature 1/4"-20 female threads with anti-twist divots.
Délai habituel entre 8 et 12 semaines
The cube features a 3/8"-16 male screw with anti-twist pins on one side for mounting on a cage or rig, and its five remaining sides feature 1/4"-20 female threads with anti-twist divots.
Délai habituel entre 8 et 12 semaines
This 100mm long movable accessory rail can mount onto separately available Wooden Camera Accessory plates using the included low-profile captive screws.
Délai habituel entre 8 et 12 semaines
The Mini plate measures 2.2 x 1.6" and features a 3/8"-16 anti-twist screw.
Délai habituel entre 8 et 12 semaines
The Mini plate measures 2.2 x 1.6" and features a 1/4"-20 anti-twist screw.
Délai habituel entre 8 et 12 semaines
The Small aluminum plate measures 5 x 2" and features multiple M2.5 threads around the sides for mounting onto the Wooden Camera Mini Accessory Rails.
Délai habituel entre 8 et 12 semaines
Mount your B-Box onto your Sony BURANO cinema camera with this B-Box Bolt-On Mount from Wooden Camera.
Délai habituel entre 8 et 12 semaines
The 1" cube features a 1/4"-20 male screw with anti-twist pins on one side for mounting on a cage or rig, and its five remaining sides feature 1/4"-20 female threads with anti-twist divots.
Délai habituel entre 8 et 12 semaines
Build a customized camera rig with the help of the 3" Wooden Camera 15mm Bolt-On Rod with 3/8"-16 Mount. This matte black accessory rod uses built-in locating pins for secure mounting and enables you to attach lens motors, handgrips, and other rod-mounted accessories.
Délai habituel entre 8 et 12 semaines
Customize your camera rig for accessory mounting with the help of the 3" Wooden Camera 19mm Bolt-On Rod with 3/8"-16 Mount. This matte black rod uses built-in locating pins for secure mounting and enables you to attach lens motors, handgrips, and other rod-mounted accessories.
Délai habituel entre 8 et 12 semaines
Customize your camera rig using this 3" Wooden Camera 15mm Bolt-On Rod 1/4"-20. This matte black accessory rod uses built-in locating pins for secure mounting.
Délai habituel entre 8 et 12 semaines
UVF v2 Clamp Piece
Délai habituel entre 8 et 12 semaines
The SHAPE wlb Giotto Multifunction Shoe is a component of the Telescopic Support Arm.
Top Plate for ATOMOS NINJA V 5'' Monitor Recorder
This part fits onto the top of the separately available Noga AD4200 or AD4300 quick release that sits on the end of any Noga magic arm, providing a quick release mount.
TransMount Weebill Quick Mounting Plate
Camera URSA Mini - HandStrap
0.8 mm Pitch 28 Teeth Aluminum Gear for FFPRO
Ball Head W/ Cold Shoe Adapter
LiteBox Mending Plate (with Four Knobs)
Strut Channel Adapter 1/2" Bolt
SmallRig Universal Rotating Handle Adapter 4112 is designed to facilitate multi-angle shooting. Built-in 8 hardened stainless steel needle rollers lock the rotating shaft to achieve precise positioning and enable two-way 360-degree step-less rotation for comfortable camera movement.
Délai habituel entre 4 et 5 semaines
Dia. 1/2" Balance Stud (Set of 2)
The Super Mafer Clamp with Adjustable Handle from SHAPE has a receiver that accepts many grip accessories, providing easy mounting of almost any light fixture, camera, or accessory. This clamp has a ratcheting handle that allows you to reposition it in case you don't have clearance to rotate it in a complete circle to tighten or loosen it.
Can be mounted onto any 1/4" industry standard hole.
Tiltaing Advanced Left Side Handle Attachment Type V - Black
Délai de livraison de 4 à 6 semaines
Tiltaing Advanced Left Side Handle Attachment Type V - Tilta Gray
Délai de livraison de 4 à 6 semaines
Tiltaing Advanced Right Side Handle Attachment Type V - Tilta Gray
Délai de livraison de 4 à 6 semaines
Tiltaing Advanced Right Side Handle Attachment Type V - Tactical Gray
Délai de livraison de 4 à 6 semaines
Tiltaing Advanced Left Side Handle Attachment Type V - Tactical Gray
Délai de livraison de 4 à 6 semaines
Tiltaing Adjustable Cold Shoe Accessory
Délai de livraison de 4 à 6 semaines
Tiltaing Adjustable Cold Shoe Accessory
Délai de livraison de 4 à 6 semaines
Tiltaing Advanced Right Side Handle Attachment Type V - Black
Délai de livraison de 4 à 6 semaines
This pair of Shape 15mm Aluminum Rods (4") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods.
Spare Pad For Bp Series
ULS Clamp Piece (15mm LW)
Délai habituel entre 8 et 12 semaines
This 60mm long movable accessory rail can mount onto separately available Wooden Camera Accessory plates using the included low-profile captive screws.
Délai habituel entre 8 et 12 semaines
The durable aluminum plate is compatible with the Wooden Camera Accessory Kit series of mounts, and it provides 1/4"-20 and 3/8"-16 anti-twist threads for mounting optional 15mm clamps, Mini Accessory Rails, hinge systems, or extensions.
Délai habituel entre 8 et 12 semaines
Great for mounting on-camera lights, microphone shock mounts, and other accessories.
Délai habituel entre 8 et 12 semaines
The Wooden Camera Mini Offset Cold Shoe Bracket attaches to any 3/8"-16 mounting point and features removable locating pins for added security.
Délai habituel entre 8 et 12 semaines
The adapter features a 1/4"-20 screw on one side and a 3/8"-16 ARRI-style accessory thread on the other.
Délai habituel entre 8 et 12 semaines
19mm carbon rods. Length: 76mm, 3in. TRINITY 2, ARTMIS 2
UVF LCD Part
Délai habituel entre 8 et 12 semaines
UMB-1 Bellows Clamping Hardware Set
Délai habituel entre 8 et 12 semaines
ULS Clamp Piece (19mm/15mm Studio)
Délai habituel entre 8 et 12 semaines
UVF Knuckle (Red Clamp Part Only)
Délai habituel entre 8 et 12 semaines
Ultra Arm Double Ball (3 inches)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Metabones Support Foot (Pocket, Canon)
Délai habituel entre 8 et 12 semaines
Alphatron/SmallHD Adapter
Délai habituel entre 8 et 12 semaines
Cover Plate (Bridgeplate)
Délai habituel entre 8 et 12 semaines
Lever (Bridgeplate)
Délai habituel entre 8 et 12 semaines
Geared Screw (Bridgeplate)
Délai habituel entre 8 et 12 semaines
Fujifilm X-H1 Camera Cage (Cable Clamp Only)
Délai habituel entre 8 et 12 semaines
Canon LCD / EVF Bracket Adapter (C300mkIII, C500mkII, C200, C200B)
Délai habituel entre 8 et 12 semaines
Director's Monitor Cage (Offset Adapter Only)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Universal Lens Support Offset Adapter
Délai habituel entre 8 et 12 semaines
ULS Tightening Knob
Délai habituel entre 8 et 12 semaines
Tiltaing Advanced Right Side Handle Attachment Type VIII - Black
Délai de livraison de 4 à 6 semaines
Tiltaing Advanced Left Side Handle Attachment Type IX - Black
Délai de livraison de 4 à 6 semaines
Tiltaing Advanced Side Handle Attachment Type XI - Black
Délai de livraison de 4 à 6 semaines
Tiltaing Advanced Right Side Handle Attachment Type IX - Black
Délai de livraison de 4 à 6 semaines
Extend your NATO rail connection to accommodate your camera's flip out LCD screen using this Tilta Left-Side NATO Rail Extension. One side of the extension is a NATO clamp which attaches to your camera cage and the other side boasts a NATO rail to attach compatible side handles. Its aluminum alloy and stainless steel construction creates a durable and...
Délai de livraison de 4 à 6 semaines
Tiltaing Advanced Left Side Handle Attachment Type VIII - Black
Délai de livraison de 4 à 6 semaines
TILTAING Handle Dovetail attachment for Type 1 Side Handles - Tilta Grey
Délai de livraison de 4 à 6 semaines
This Side Handle Attachment allows you to mount your Advanced Right or Left Side Wooden Handles via an ARRI Rosette Connection. This is the perfect option for our RED Raptor Cage, RED Komodo Cage, or any other camera cage that features an ARRI Rosette. This attachment type can also be adapted to work with almost any cage via out 1/4?-20 to ARRI Rosette...
Délai de livraison de 4 à 6 semaines
Bottom Plate for Sony a7SII/a7RII/a7RIII/A9/A7R - Tilta Gray
Délai de livraison de 4 à 6 semaines
Bottom Plate for Sony a7/a7S - Tilta Gray(Thick)
Délai de livraison de 4 à 6 semaines
TILTAING Handle Dovetail attachment for Type 4 Side Handles - Tilta Grey
Délai de livraison de 4 à 6 semaines
TILTAING Handle Dovetail attachment for Type 4 Side Handles - Black version
Délai de livraison de 4 à 6 semaines
TILTAING Handle Dovetail attachment for Type 1 Side Handles - Black version
Délai de livraison de 4 à 6 semaines
Stainless steel rod 19x250mm
Délai de livraison de 4 à 6 semaines
The 15mm reduction insert can be fitted to any 19 mm rod mountto allow compatibility with 15 mm rods.
Friction swivel and tilt monitor light, microphone mount cold shoe base
The monitor plugs directly into the gimbal's 3.5mm mini-jack plug. When the USB connection cable (included in delivery of the Evolution/Rider M) is connected to a GoPro Hero 4/3/3+ and the camera is switched on, the monitor is automatically activated.
Base Accessory Mounting Plate for Canon C70 - Black
Délai de livraison de 4 à 6 semaines
Tilta Baseball Cap - Black
Délai de livraison de 4 à 6 semaines
Top Plate for Canon C500 Mk II/C300 Mk III
Délai de livraison de 4 à 6 semaines
Bottom Plate for Sony a7SII/a7RII/a7RIII/A9/A7R - Black version
Délai de livraison de 4 à 6 semaines
Bottom Plate for Sony a7/a7S - Black version(Thick)
Délai de livraison de 4 à 6 semaines
1/4 inches-20 to ARRI Rosette Attachment for Panasonic GH Series and Sony a7/a9 Series - Tilta Gray
Délai de livraison de 4 à 6 semaines
1/4 inches-20 to ARRI Rosette Attachment for Panasonic GH Series and Sony a7/a9 Series - Black version
Délai de livraison de 4 à 6 semaines
Friction tilt cold shoe mount for monitor, light, microphones
Magnetic Cup Holder W/ Velcro
1/4"-20 Screw to 17mm Ball Adapter
Dia.26mm W/ Self Tapping Screw
Wooden Camera - 15mm Rod (6 inches)
Délai habituel entre 8 et 12 semaines
Wooden Camera - 19mm Rod (6 inches)
Délai habituel entre 8 et 12 semaines
Customize your camera rig using this 1.5" Wooden Camera 15mm Bolt-On Rod 1/4"-20. This matte black accessory rod uses built-in locating pins for secure mounting.
Délai habituel entre 8 et 12 semaines
Build a customized camera rig with the help of the 1.5" Wooden Camera 15mm Bolt-On Rod with 3/8"-16 Mount. This matte black accessory rod uses built-in locating pins for secure mounting and enables you to attach lens motors, handgrips, and other rod-mounted accessories.
Délai habituel entre 8 et 12 semaines
Customize your camera rig for accessory mounting with the help of the 1.5" Wooden Camera 19mm Bolt-On Rod with 3/8"-16 Mount. This matte black rod uses built-in locating pins for secure mounting and enables you to attach lens motors, handgrips, and other rod-mounted accessories.
Délai habituel entre 8 et 12 semaines