Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
LWS - Light Weight Support 15 HD Allround - * special without rods * - double rod guidance and clamp - adjustable for cameras with optical height betw. 26.5 a. 72.5 mm (distance betw. lens center a. camera bottom). Spacers (pairs) of 1 - 2 - 4 - 8 - 2 x 16 mm - set of screws - table with camera heights and Allen wrench are included.
Light Weight Support Sony Universal HD + updated version 2018 , Digital ENG, incl. 2 rods ? 15mm, L205mm
Universal 15/19mm Lens Support Bracket with 3 support stands, intercombinable, lenght 14, 27 and 35 mm (1/4" und 3/8" threads), for lenses with knurled terminal screw M6 for lenses with thread M6. With QuickFit device for diameter 15 LWS + 19 mm rods.
Handgrip Extension (pair), for all handles with Hirth (ARRI) rosettes.
Cold Shoe Rail on the Universal QuickFit Accessory Bridge for 15 and 19mm rod diameter . For mounting of devices with hot / cold shoe adaptors, such as MagNum lens remote control and ALADIN MK II Broadcast for UHD TV setup.
The durable aluminum support bracket mounts onto the side of the camera LCD with a clamping design, using the display's side rod port to secure it.
Welded Aluminium Frames (60 x 60 cm) Pack of 5 pieces
Assistant's Front Box Mount for Fluid Head
The All-in-One Video Kit Ultra from SmallRig is a professional solution for smartphone vlogging, live streaming, and more.
Délai habituel entre 4 et 5 semaines
Tiltaing Advanced Side Wooden Handle Type X - Black (One Pair)
Délai de livraison de 4 à 6 semaines
Tiltaing Advanced Side Wooden Handle Type XI - Black (One Pair)
Délai de livraison de 4 à 6 semaines
Tiltaing Advanced Side Wooden Handle Type IX - Black (One Pair)
Délai de livraison de 4 à 6 semaines
The Pro Rod Support 15mm Type Q from Vocas provides 15mm LWS support for select DSLR and mirrorless cameras. This versatile baseplate system is height adjustable and includes a pair of 9.2" 15mm rods.
NATO Lock Ultra Arm (3")
Délai habituel entre 8 et 12 semaines
Battery Swing Bracket Only (for D-Box Plus)
Délai habituel entre 8 et 12 semaines
The Camera Side Bracket CSB-1R allows mounting of accessories to the right side of the ALEXA 35 without obstructing the user buttons. It features an ARRI rosette for hand grips and multiple 1/4-20, 3/8-16 and M4 mounting holes. It can be extended with the Camera Side Bracket CSB-1R Extension (K2.0034189).
The Camera Side Bracket CSB-1L allows mounting of accessories to the left side of the ALEXA 35 without obstructing the user buttons. It features an ARRI rosette for hand grips and multiple 1/4-20, 3/8-16 and M4 mounting holes.
The Vertical Top Plate attaches to the ALEXA 35's left side and acts as a top plate to support the Lightweight Camera Handle LCH-1.
The RAB-3 is a rear accessory bracket for ALEXA Mini LF optimized for the new utility base BUD-3. Note a classic RAB-1 for ALEXA Mini LF can be turned in to a RAB-3 by removing the lower end of the RAB-1 in order to connect direct to the RAB-1.
Panasonic AU-EVA1, Sony FS7, FS5 V-Mount Cheese Plate
Lockable Drawer for the Platform of Image Mobile Station
Wooden Camera - Safety Dovetail (12 inches)
Délai habituel entre 8 et 12 semaines
Chapman hardened steel European Coupling
Rack Mounting Bracket for PVM-X2400
Lens Support Bracket for Fujinon ENG zoom lenses for mounting on LWS ? 15mm rods
Could be mounted on front and back of Adapter Plate for Epic/Scarlet or can beused for the Cage System. This rod console also can beused for several adapterplates.
The bracket for Zacuto Gratical EVF electronic viewfinder provides a design-specific interface to the traditional ARRI viewfinder support.
Bowl 150 mm
The SHAPE CP33 Cheese Plate with Anton Bauer Plate is a 15mm rod-mount cheese plate with an Anton Bauer Gold Mount battery plate screwed onto one side.
The SHAPE CP33 Cheese Plate with IDX Plate is a 15mm rod-mount cheese plate with an IDX V-Mount battery plate screwed onto one side.
SONY PXW-FS7M2 REMOTE EXTENSION HANDLE KIT
REVOLT BRIDGEPLATE 15MM LW KIT
Panasonic AU-EVA1, Sony FS7, FS5 Gold Mount Cheese Plate
LWS Light weight support for Sony HXR-NX5 complete (401-400A + 401-424P)
LWS Light weight support for sinaCAM with B4 or C lens mount - complete (401-400 + 401-428P)
LWS Light weight support for Panasonic AG-AF100 + HDC-Z10000EZ complete (401-400 + 401-427P)
DSW 400 - Direct Swing-Away-System - swing radius 50mm - bracket with hinge to clamp on Light Weight Support with 15mm rods type 401-4xx - incl. 2 pcs. knurled nut M3 (E1744010) and 2 washers (6x12xT0.5) - mounting on large SunShades e.g 411-50
LWS Light weight support for Sony HDR-FX1/ HVR-Z1/PMW-EX1/HVR-Z7 complete (401-400 + 401-417P)
LWS Light weight support for Panasonic AG-3DA1 - HVX-200 - HPX-250/160/130 - Canon XF-305 / XF-300. Sony PMW-F3 - complete (401-400 + 401-415P) (For Sony F3 please choose 401-415HD)
DSW 400 - Direct Swing-Away-System - swing radius 50mm - bracket with hinge to clamp on LWS 15mm rods type 401-4xx - incl. 2 countersunk flat head screws M3x8 for mounting on MB450/CMB
Two-Part Top Plate Kit for Sony FS5 Camera
TELESCOPIC SUPPORT ARM RODBLOC WITH QUICK PLATE
LED PWR MODULE QUAD
Délai de livraison de 4 à 6 semaines
Wooden Camera - NATO Handle Kit (Leather, 70mm)
NATO Handle Kit (Plus, 70mm)
NATO Handle Kit (Plus, 100mm)
Mount your professional production display weighing up to 45 lb onto a C-stand or other mount with a 5/8" Baby pin using this Ultra Quick Release Articulating Monitor Mount from Wooden Camera.
Délai habituel entre 8 et 12 semaines
Set of Rosetts for Broadcast Sony/ULB-4. Includes: K2.47639.0 2x Rosette for Broadcast Plate ULB-4
Crossbar v3 (Pivoting ARRI Rosettes)
Délai habituel entre 8 et 12 semaines
Part 1 Riser Set (male)
Délai habituel 6 semaines
NATO Handle Plus V2 Kit (NATO ARRI 70mm Rail, 1.67" Screw Channel).
Délai habituel entre 8 et 12 semaines
Wooden Camera - UVF v2 Sled
Délai habituel entre 8 et 12 semaines
Wooden Camera - Rosette Arm
Délai habituel entre 8 et 12 semaines
The BLOC 15 Arri Rosette Adapter for 15mm LWS and Studio-Spaced Rods from SHAPE provides a left hand and a right hand Arri rosette for the addition of hand grips and other accessories to a 15mm rod system.
The SHAPE Adjustable Rod Bloc for 15 to 19mm Rods is designed to fit HAND10 handles from SHAPE (sold separately).
Lens Support For 15 mm Studio Bridge Plate
Lens Support For 19 mm Studio Bridge Plate
Sony FX9 remote extension kit
This ARRI Side Bracket is for the left side of your Sony BURANO.
This ARRI Side Bracket is for the right side of your Sony BURANO.
Compatible with the Top Plate for Sony Venice 1/2 and Plate for Sony Venice 1/2. Not compatible with Top Plate for Sony Venice and Plate for Sony Venice. The side bracket has been adapted in order to fit the geometry and controls of the camera. It offers 3/8"-16, 1/4-20, and M4 interfaces to fit with RMB-3, RMB-8, and RA-6.
Compatible with Sony Venice 1/2. The Plate comes with two integrated 15mm lightweight supports (at the front and the back) and is compatible with the BPA-5 (K2.0017138) and the BSA-1 (K2.0043749). This plate offers a pair of M4 threads on each side to attach the side brackets left and right.
The BGA-2 adapter comes with a ARRI Rosette and offers the possibility to securelyattach common bicycle grips with a standard inner diameter of 22 mm/ 0.87" and alength of up to 136 mm. This allows you to choose the material and ergometry of the handle according to your own requirements. A counter screw at the rear end prevents the bicycle handle from...
Weight-optimized side bracket to increases stability and protects the camera.
The side bracket has been adapted to the geometry and controls of the camera. It offers additional stability, additional 3/8" interfaces and a RA-6 interface.
The Rod Mounting Bracket RMB-6 expands camera set-ups opportunities by offering strong support to rod-mounted camera accessories such as lens motors, image transmitters or ultrasonic distance devices.
The CCH-4 is a completely closed top handle and is compatible to most of the ARRI PCA top plates. Numerous of interfaces (1/4-20; 3/8-16; M4) for additional accessories (e.g. RMB-3) are integrated
Single rod bracket for 19mm rods (15mm rods with supplied insert) mounting to AMIRA body (top/right). Optimized for camera stabilizer systems and lens motors. Compatible with original AMIRA handle and viewfinder bracket. Includes: K2.0013007 1x Rod Mounting Bracket RMB-4; K2.66255.0 1x 15 mm Reduction Insert
Half Ball Adapter (100mm)
Euro Adapter Bridge
Attaches to the ALEXA Center Camera Handle(CCH-1) or any 3/8-16 UNC threaded mounting point. When attached to the front of the Center Camera Handle (CCH-1) - the tape hook is excatly in the sensor plane. Includes 3x 3/8-16 UNC threaded mounting points.
Dual Channel Wireless Lens Control Handle for Advanced Ring Grip
Délai de livraison de 4 à 6 semaines
Bracket for Dismantable Frames Pack of 2 pieces
This adapter kit includes the Front Rod Bracket and Rear Adapter Plate and mounts onto the separately available Wooden Camera Front Top Plate assembly for ALEXA 35.
Délai habituel entre 8 et 12 semaines
SHAPE Lightweight Arri Standard 12" Dovetail Plate
Remote Extension Handle For Sony Fs7.
Left cage side for the Canon EOS C200 cage kit (0600-0050). The left cage side provides a standard rosette for mounting a handgrip (0390-0104) and also provides additional mounting points for ¼ and 3/8accessories
. This Top Handle provides 1/4"-20 and 3/8"-16 accessory threads, two cold shoes, and a single 15mm rod clamp for attaching a separate viewfinder adapter.
The kit includes a mini compact top handle, two "dogbone"-style 15mm brackets, and a 15mm rod that measures 6.7" in length.
Used in conjunction with the Zhiyun MasterEye Visual Controller VC100 for footage monitoring control, motion sensor control and high-quality screen recording on the Zhiyun Weebill 2 3-axis stabiliser.
Attaches to the ALEXA M and ALEXA XT Mhead or Top Adapter Plate for Sony F-5/F-55 and provides numerous 3/8-16 UNC threaded mounting points for accessory mounting.
Attaches via 3/8 UNC thread with two locating pins for stability. For use with Arri 18,65mm shoe-mounted accessories.With 435 - attaches to camera carrying handle - the handle must have locating pin holes. Not for 16SR3 or 535.
This bracket connects the Canon Monitor Unit to thetraditional ARRI viewfinder mount, in order to benefit from the same ease of repositioning as a traditional electronic viewfinder.
The Viewfinder Bracket for VariCam is attached to the camera viewfinder in place of the original quick release mechanism. This allows compatibility between the VariCam electronic viewfinder and classic ARRI mounts such as the Mini Viewfinder Bracket MVB-1. Compatible with VariCam LT & VariCam 35/HS
The view?nder bracket for BOMB EVF (LCOS) allows the view?nder to be attached to a camera via a classic ARRI viewfinder mount, such as the Mini Viewfinder Bracket MVB-1
The view?nder bracket for DSMC2 RED EVF (OLED) allows the view?nder to be attached to a camera via a classic ARRI viewfinder mount, such as the Mini Viewfinder Bracket MVB-1
The Bracket attaches the AU-EVA1 Monitor via 15mm LWS rods and a monitor mount
Viewfinder Bracket for Sony Viewfinder DVF-EL200 (Venice). It is compatible with ARRI's viewfinder mounting bracket MVB-1.
The Side Bracket Right has been adapted to the geometry and controls of the camera. It offers additional stability and interfaces such as 3/8 inch, 1/4 inch, RMB-3 and for the Canon Microphone bracket. It is compatible with the rosette adapters RA-6.
The Side Bracket Left has been adapted to the geometry and controls of the camera. It offers additional stability and interfaces such as 3/8 inch, 1/4 inch and RMB-3. It is compatible with the rosette adapters RA-6.
Converts OConnor Platform rosettes to other mounting standards for accessory mounting (60 tooth ARRI style rosette and 1/4-20 and 3/8-16 threads)
LWS Light weight support for JVC GY-HM100 E complete (401-400 + 401-423P)
Use the Adjustable Handgrip Extender for Sony FX6 from Vocas to position your original FX6 handgrip at a more comfortable distance for handheld operating
Use the four 1/4" bolts that come in the package to attach your Canon RF mount to your optional LPL or PL adapters.
Offers protection and the possibility to attach accessories
Polystyrene plate supports
Bended Aluminium Frames (60 x 60 cm)
Quick Release Sleeper Box (10 pieces)
Baseplate for Sony FS5 Camera
Blackmagic Pocket Camera Battery Grip
The PVMK-RX18 is a rack-mounting bracket specifically designed for mounting the PVM-X1800 high grade picture monitor directly on a 19-inch EIA standard rack.
The kit consists of a top bracket and top handle that mount using included screws onto the top of the separately available side plate kit.
Support a heavy lens while using an LPL lens adapter using this 15mm Rod Clamp for LPL Adapters from Vocas. The aluminum rod clamp fits around your Vocas LPL lens adapter and the standard 15mm rod clamp attaches to separately available top-mounted rods.
Mitchell Mount With 2" Coupler Collar Castle & Nut
Arri Wcu-4 Monitor Mount and Douking Bracket
Tilta Nucleus-m Monitor Mount and Doucking Bracket
Light weight support Sony universal without rods
LWS - Light Weight Support 15 HD Sony F5/ F55 without rods, double rod guidance and clamping
Mounting plate (with adjustable angle) for battery holder at diameter 15 mm rods - universal adapter plate with holes and threads for Anton/Bauer Gold Mount - IDX V-Plate and PAG-Lok battery mounts - Sony recorder for FS-700
Universal Rod Support with QuickFit, for 15 + 19mm rods on bridge plates. Includes 22 mm stud which supports long rods on the dove-tail-plate.
LWS - Light Weight Support 15 HD for DSLR camera with anti-twist block - WITHOUT RODS - double rod guidance and clamps. Adjustable for larger camera bodies by removing spacers. Shorter M5 x 45 mm screwsand Allen wrench are included. (Compatible for Canon EOS 5D - Nikon D800 - Nikon D90 - Panasonic DMC-GH3 - Black Magic Pocket Camera)
Adaptor 15mm to Bridgeplate with diameter 19mm rods - height and side adjustable (for use with Mattebox)
Rod diameter 19mm x 720mm length for Bridge Plate
MultiPad 15 Straight - for mounting the pad behind the camera and reversed under the camera. With the rods in lower position a tripod plate can remain.
The BAP-2A is a side mounted battery plate offering compatibility to the Compact Bridge Plates CBP-1 and CBP-2. The BAP-2A features mounting interfaces to common battery plates, including ARRI Power Splitting Box and Bebob AMICRO and VMICRO
The MSB-3 is a side bracket designed around the on-board recorder of the ALEXA Mini LF and the new viewfinder connector (Camera left).
The Vertical Format Adapters allow the ALEXA Mini/Mini LF to be used with the sensor vertical, 9/16 format. All ARRI baseplates for ALEXA Mini/ Mini LF can be used in that configuration, including the Compact Bridge Plate CBP-1 and CBP-2.
The monitor bracket for the Canon C200 LCD replaces the original bracket from Canon. The ARRI PCA monitor bracket is an improved bracket to fit with viewfinder mounting bracket MVB-1
Single rod bracket for 19mm rods (15mm rods with optional insert) mounting to AMIRA body (top/right). Optimized for camera stabilizer systems and lens motors. Compatible with original AMIRA handle and viewfinder bracket
Mini Hydro Kit
Délai habituel entre 4 et 8 semaines
The Side Accessory Bracket fits to the Mini Adapter plates MAP-1 and MAP-2, as well as the Broadcast Plate for ALEXA Mini and Compact Bridge Plate CBP-1. The SAB-1 provides standard ARRI 3/8 and ? accessories interfaces, as well as attachment points for the Rod Mounting Bracket RMB-3 and Mini Side Brackets MSB-1
Cage side bracked for accessory interfaces featuring sturdy Arri rosettes and 1/4-20" and 3/8-16" mounting points. Requires MAP-1 or MAP-2 mounted on top and on bottom of the camera body.
Attaches to the Center Camera Handle (CCH-1) or any 3/8-16 UNC threaded mounting point. When attached to the front of the Center Camera Handle (CCH-1) - the tape hook is excatly in the sensor plane. Includes 3x 3/8-16 UNC threaded mounting points.
With the UAP-1 the camera can be quickly moved froma traditional Arri cine-style bridge plate (including BP-3 - 5 - 8 or 9) to a Steadicam dove tail plate. It attaches to the front and back foot of ALEXA - ALEXA Plus - ALEXA Plus 4:3 - ALEXA M body - ALEXA XT - ALEXA XT M body or ALEXA XT Plus with a tight and secure fit.
Attaches to the Center Camera Handle (CCH-1) or any 3/8-16 UNC threaded mounting point. When attached to the front of the Center Camera Handle (CCH-1) - the tape hook is excatly in the sensor plane. Includes 3x 3/8-16 UNC threaded mounting points.
The Cage Top Handle CTH-1 is designed to fit onany single 3/8-16 interface found on the Arri Cage System. Like the ALEXA handle - the CTH-1 offers numerous mounting points in the industry standard 3/8-16 and 1/4-20 thread sizes. The Handle is seamlessly compatible with all three sizes of Arri Handle Extension Brackets HEB-1 - HEB-2and HEB-3.
Canon C100 C300 C500 Bracket. Unique Design To Fit Our Quick Handle System
Tiltaing Left Side Advanced Focus Handle (F570 Battery) - Black
Délai de livraison de 4 à 6 semaines
Sony Venice Rear Extension for Top Handle (90 Degree Attachment + Straight Wooden Handle )
Délai de livraison de 4 à 6 semaines
Tiltaing Right Side Advanced Focus Handle (F570 Battery) -Black
Délai de livraison de 4 à 6 semaines
Tiltaing Left Side Advanced Focus Handle (F570 Battery) - Tilta Gray
Délai de livraison de 4 à 6 semaines
EVF holder kit for ESR-T01-A cage including rod
Délai de livraison de 4 à 6 semaines
Mitchell Adapter
URSA Broadcast ENG Kit
H-cheese plate for top bars Sony PXW-FS7 / FS7 II
Our USBP sliding systems allows quick balancing of the camera while at the same time allowing a rapid changes between gimbel-, 15 mm- and 19mm setups.
HU-11 Hot Shoe Unit
Délai habituel entre 6 et 8 semaines
Use the Shoulder Pad Pro from SmallRig to quickly switch between handholding your cinema camera and mounting it on a separately available VCT-14 tripod adapter plate.
Délai habituel entre 4 et 5 semaines
One pair diameter 15 mm - stainless steel.
One pair diameter 19 mm - stainless steel.
The clamp is part of the Wooden Camera EVF System and mounts onto an accessory rail or the EVF Swivel Arm NATO rail and allows you to slide and swivel the EVF when it's mounted onto an Accessory Rail with the EVF Plate.
Délai habituel entre 8 et 12 semaines
Eyepiece Leveling Bracket for heads
Délai de livraison de 4 à 6 semaines
The bracket connects between the monitor and your camera after removing the detachable LCD monitor, and the bracket angle can be adjusted using the two locking levers.
The plate mounts onto the camera using the Wooden Camera Top Plate, Ultra Handle System, or Side Rails, and it provides four adjustable accessory rails to mount and adjust the position of the viewfinder.
Délai habituel entre 8 et 12 semaines
Adjust and swivel your Sony BURANO EVF with this Universal EVF Accessory Rail Swivel Clamp from Wooden Camera.
Délai habituel entre 8 et 12 semaines
Compatible with all three side brackets for the Sony BURANO
Polystyrene plate supports
Sony FX6 Side Handle Adaptor to ARRI Rosette
Allows the viewfinder MVF-1 to be rotated 90° on ist optical axis, in order to frame footage shot vertically.
Bowl 100 mm
The plate mounts onto the camera using the Wooden Camera Top Plate, Ultra Handle System, or Side Rails, and it provides four adjustable accessory rails to mount and adjust the position of the viewfinder.
Délai habituel entre 8 et 12 semaines
This adapter mounts most SmallHD monitors to 19mm rods, such as the rod for Director's Monitor Support DMS-1
This adapter mounts most Transvideo monitors to a 19mm rods such as the rod for Director's Monitor Support DMS-1
Attaches with velcro to the shoulder arch at the bottom of the ALEXA - ALEXA Plus - ALEXA Plus 4:3 - ALEXA Studio - ALEXA XT - ALEXA XT M Body - ALEXA XT Plus or ALEXA XT Studio.
An extension that attaches between the camera body and the handgrip to move the handgrip further away from the camera body. (measurement from end to end: 10 mm)
SONY FS7M2 REMOTE EXTENTION HANDLE
The fixed Kinefinity KineMOUNT attaches to the camera body by means of 4 screws. It lets you connect to a numerous amount of lens mounts including PL, EF and E mounts.
Complete Mitchell Threaded & Castle Nut
6" Suction Cup With Swivel Couler for 2" Tube
15mm x 3.5in Cube Bar
Telescopic support arm
Create a handle that best suits your Sony VENICE series camera rig using this 5" Ultra Handle Extension from Wooden Camera thanks to its modular design.
Délai habituel entre 8 et 12 semaines
These durable aluminum plates feature 3/8"-16 and 1/4"-20 anti-twist accessory mounting threads for mounting accessories such as rods, extensions, or lens accessories.
Délai habituel entre 8 et 12 semaines
WC Pro Gold Mount (3x D-Tap)
Délai habituel entre 8 et 12 semaines
The Short Pass-Through Top Plate for RED DSMC2 from Wooden Camera attaches to the top of the camera and provides 1/4"-20 threaded holes with RED spacing.
Délai habituel entre 8 et 12 semaines
UVF Knuckle Assembly
Délai habituel entre 8 et 12 semaines
15mm Rod Indexable Left Side Wooden Handle
15mm Rod Indexable Right Side Wooden Handle
Sony FX9 push-button view finder mount
Canon C500 Mark II top plate
60 tooth rosette for using Sachtler Pan bar with OConnor head
Rosette Handle Pair (Rubber)
Délai habituel entre 8 et 12 semaines
The 15mm Dual Mount Bolt-On Accessory Rod Kit with 3/8"-16 threads from Wooden Camera includes 1.5, 3, and 5" 15mm bolt-on rods. Each rod sports two 3/8"-16 anti-twist mounts for positioning either on the face or side of your rig.
Délai habituel entre 8 et 12 semaines
Top Plate (Sony FX6)
Délai habituel entre 8 et 12 semaines
Mini Vertical Camera Bracket
Délai habituel entre 8 et 12 semaines
Rosette Handle Pair (Brown Leather)
Délai habituel entre 8 et 12 semaines
Universal ARRI Rosette Rod Bracket (15mm LW/Studio, 19mm)
Délai habituel entre 8 et 12 semaines
Wooden Camera Handgrip (Left) is an ergonomic wooden handgrip, carved from a solid piece of Sapele wood which is similar to Mahogany. Attaches by ARRI standard rosette and M6 threaded thumbscrew.
Délai habituel entre 8 et 12 semaines
Wooden Camera Handgrip (Right) is an ergonomic wooden handgrip, carved from a solid piece of Sapele wood which is similar to Mahogany. Attaches by ARRI standard rosette and M6 threaded thumbscrew.
Délai habituel entre 8 et 12 semaines
Top Plate (Canon C300mkII)
Délai habituel entre 8 et 12 semaines
UVF Mount (Rod/NATO Rail)
Délai habituel entre 8 et 12 semaines
Wooden Camera Handgrip Trigger Box attaches to the Wooden Handgrip (Right) and (Left) to add start/stop functionality for LANC and ARRI 3 pin Fischer compatible cameras.
Délai habituel entre 8 et 12 semaines
The sliding adapter enables the CCH-4 to slide back and forth for finding the perfect balancing point on the camera. It can be mounted in different positions on various ARRI top plates (not compatible with the top plate for RED, C300 MkII, Sony A7 and the MAP-1 and 2 from the ALEXA Mini)
Shoulder support to BP-19 adapter. By attaching this adapter, the Vocas shoulder support (0370-0001) can be attached to any standard dovetail plate.
Mitchell Adapter
Attaches to the side of the AMIRA camera and provides 3/8" and 1/4" threads, as well as M4 threads for ARRI accessories such as the Rod Mounting Bracket RMB-3
Offsets ARRI rosette - based handgrip system by 50mm. The Extension Spacer does not required a tool
Metal plate specific for URSA , 2 DTAP outputs
only for mechanical use - without RS cable
The plate provides an option for mounting a separately available battery plate such as a Gold mount or V-mount onto your camera rig's 15mm LWS rod system.
Arri Amira flat base plate
Eyepiece Leveling Bracket
Délai de livraison de 4 à 6 semaines
The durable aluminum plates feature 3/8"-16 and two 1/4"-20 anti-twist accessory mounting threads for mounting accessories such as rods, extensions, or lens accessories.
Délai habituel entre 8 et 12 semaines
Wooden Camera - Rosette Bracket
Délai habituel entre 8 et 12 semaines
Separate cheese plate for top bars Canon EOS C200
Sony VENICE dovetail adapter plate for USBP MKII
Director's monitor cage sunshade
Accessory Holder with Sony Accessory Mount
Bracket that can be attached to a NATO rail, allowing a 15 mm tube to be used. Including a 60 mm long 15 mm tube.
Add a support to your PL adapter and add an optional handgrip to create a directors viewfinder with this Director's Viewfinder Bracket from Vocas. T
Quick Release Sleeper Box (5 pieces)
Triangle Brackets
Poly Hangers Pack of 4 pieces
Preston Micro Force to ARRI Rosette
Délai habituel entre 8 et 12 semaines
One pair diameter 15 mm - stainless steel.
One pair diameter 19 mm - stainless steel.
The LBS-3 offers a single rosette connection for one handgrip. In comparison to the still existing LBS-2 it is more than 50% lighter (100g).
Basic Set 15mm Reduction Insert. The 15 mm reduction insert can be fitted to any 19 mm rod mount to allow compatibility with 15 mm rods. Includes: K2.66255.0 5x 15mm Reduction Insert
The TransMount SmartSling handle lets you control your Zhiyun Crane 3S gimbal.
Conveniently control the focus or zoom of your compatible camera with the help of the Zhiyun Zoom and Focus Motor Kit 3S.
H-cheese plate for Panasonic AU-EVA1
Camera URSA - Handgrip
150mm Mitchell to Bowl Adapter
Double Ended Elemack/euro Adapter
Double Ended Elemack/euro(M12)
Euro Mount Adapter (Female)
Wooden Camera - Safety Dovetail (8 inches)
Délai habituel entre 8 et 12 semaines
The Wooden Camera WC-152400 Side Handle attaches to your camera or camera cage via two 1/4"-20 mounting screws, providing a secure grip to carry your camera by.
Délai habituel entre 8 et 12 semaines
The Wooden Camera WC-152500 Side Handle attaches to your camera or camera cage via two 1/4"-20 mounting screws, providing a secure grip to carry your camera by.
Délai habituel entre 8 et 12 semaines
The Wooden Camera WC-152600 Side Handle attaches to your camera or camera cage via two 1/4"-20 mounting screws, providing a secure grip to carry your camera by.
Délai habituel entre 8 et 12 semaines
Nucleus-M Handle Bridge (15/19mm)
Délai de livraison de 4 à 6 semaines
10 inches lightweight dovetail plate - Black version
Délai de livraison de 4 à 6 semaines
10 inches lightweight dovetail plate - Silver version
Délai de livraison de 4 à 6 semaines
Preston MDR3 / MDR4 Ultra Arm Mounting Kit (3/8-16 ARRI Accessory Mount)
Délai habituel entre 8 et 12 semaines
Heavy Duty Quick Release Mounting Set
Adaptor 15mm to Bridgeplate with diameter 15mm rods (for use with e.g. StudioRig)
Rod clamp with knob for camera start/stop signal with 2,5mm jack for LANC (TM) connection (div. cameras) - compatible to leather handles 403-30, rods with diameter 15 mm etc.
Wooden Camera - LW 15mm Adapter (15mm Studio)
Délai habituel entre 8 et 12 semaines
Wooden Camera - LW 15mm Adapter (19mm)
Délai habituel entre 8 et 12 semaines
The SHAPE Delta Marbel Quick Release Kit includes: V-Lock Quick Release Plate; V-Lock Quick Release Delta Adapter with 1/4"-20 Screw and Alignment Screw; Spare 1/4"-20 Screw and Alignment Screw; Camera Mid-Plate with Removable Stoppers; Set of Hex Keys.
Top Plate Kit (RED Komodo, ARCA Swiss)
Délai habituel entre 8 et 12 semaines
Lens Belt-Nylon belt with 4-inch & 7-inch Lens Cups, Black
Délai habituel entre 8 à 10 semaines
The SHAPE Adjustable Composite Shoulder Pad is a core component of SHAPE's Composite series of camera supports.
URSA Cine EVF Extension
All purpose 26mm dovetail shoe. Can be attached to 3/8 thread mounting points having standard Arri diameter15,5mm counterbore. For use with 26mm dovetail inserts.
Compatible with Operator Control Unit OCU-1 (K2.0020002) with a dovetail mounting interface for CLM-5/cforce mini Clamp Console 19/15mm (K2.0006176) and two screws for flexible mounting positions.
Sunrise Adapter
DJI Ronin 2 Multi-function Mount
CPK - Half-Moon Ball Joint (collars not supplied)
Unified DSLR 15mm Baseplate (Core Only)
Délai habituel entre 8 et 12 semaines
400mm interaxis Dolly plate for camera or Risers
Délai habituel 6 semaines
Multipurpose PTZ mount plate
Délai habituel 6 semaines
Adaptor 15mm to Bridgeplate with diameter 19mm rods (for use with e.g. StudioRig / Projector)
Universal Rod Clamp for ? 15 and 19mm Rods due to integrated slider, with captive clamp lever
Add accessories such as a top handle, extension arms, a monitor, or an EVF mount to your Canon C70 camera with this Top Cheese Plate from Vocas.
Universal Clamp with a 3/8in screw to mount accessories or the CCP Live (KK.0047755) at the back of the Rear Accessory Bracket RAB-1 (K2.0013937)
Quick-release Motor Extension Rod Clamp
Délai habituel entre 2 et 6 semaines
Universal bridge plate Arri standard
Set of Steel Rods ?19mm, length 440mm for Bridge Plate
Rigging Top Plate for RED KOMODO-X
Délai habituel entre 8 et 12 semaines
The Shape Composite Shoulder Pad is for the Shape F3 Composite Support Rig and intended for use with larger-sized cameras such as the F3, EX1, and P2hd.
Small, compact and lightweight adapter plate for easy setup on gimbals and mini rigs, providing centered 1/4-20" and 3/8-16" accessory mounting points and interfaces to mount RMB-3, MSB-1 and the CCH-2 handle. MAP-1 can be mounted on top or on bottom of the camera body.
Quick Release Baseplate for Sony FX6
Délai de livraison de 4 à 6 semaines
The cheese plate mounts on top of your C500 Mark II and facilitates the mounting of a top handle or relocating the original C500 handgrip.
The Side Bracket Right offers plenty of interfaces (1/4 inch-20; 3/8 inch-16 with anti-twist pin holes; RMB-3; RA-6, Wooden Handgrip WHG-1 and for the base plate to be used for vertical shooting)
The Side Bracket Right offers plenty of interfaces (1/4 inch-20; 3/8 inch-16 with anti-twist pin holes; RMB-3; RA-6, Wooden Handgrip WHG-1, Cable Clamp and for the base plate to be used for vertical shooting)
The Wooden Shell is made of walnut wood and part of ARRI´s Handle Extension Family. It improves the haptic and can be attached directly to the HEX-5 or HEX-4 but also to combined shorter HEX through the slotted hole design.
The BGA-1 adapter offer the possibility to securely attach common bicycle grips with a standard inner diameter of 22 mm/ 0.87" and a length of up to 136 mm. This allows you to choose the material and ergometry of the handle according to your own requirements. A counter screw at the rear end prevents the bicycle handle from accidentally slipping off. Note:...
The Rosette Adapters allow to attach rosettes on different positions. They are compatible with the following side brackets: Sony Venice Extension Unit, Sony FX9, Canon C500 MKII. They will be attached by two screws and are rock solid.
A short aluminum rod that attaches between camera body and handgrip to move the handgrip further away (left or right) from the camera body.
19mm studio rod support for bottom plates designed to offer support to long rods and avoid flex with heavy lenses. This support bracket is designed for Compact Bridge Plates CBP-1 19mm Studio (ALEXA Mini / ALEXA Mini LF). And CBP-3 19mm Studio (AMIRA). For support with classic Bridge plates BP-8 19mm Studio, please see RSB-19 K2.0000467.
15mm studio rod support for bottom plates, designed to offer support to long rods and avoid flex with heavy lenses. This support bracket is designed for Compact Bridge Plates CBP-2 15mm Studio (ALEXA Mini / ALEXA Mini LF). And CBP-4 15mm Studio (AMIRA). For support with classic Bridge plates BP-9 15mm Studio, please see RSB-15 K2.0000437
The Bridge Plate Adapter BPA-5 allows quick transfer from shoulder camera to cine style bridge plates such as BP-8 and BP-9. It is compatible with the upper part of the Plate for Sony Venice (K2.0017137)
The monitor bracket allows the camera monitor to be repositioned on top-mounted 15 mm LWS rods.
Interface to traditional Cine style pridge plates like BP-8 and BP-9. Requires MAP-2 mounted to the camera.
Sony FS5 Viewfinder Solution For Top Handle
Easy Riser (RED DSMC2)
Délai habituel entre 8 et 12 semaines
This bracket mounts onto the separately available Wooden Camera Front Top Plate assembly for ALEXA 35, and it allows you to mount your CCH-5 handle onto the camera using 15mm rod clamps.
Délai habituel entre 8 et 12 semaines
19mm rod attachment on NATO rails. Compatible with all three side brackets for the Sony BURANO
Shape 15 mm lw to 19 mm Studio Snap-on Adapter
Shape 15mm lw to 15mm Studio Snap-on Adapter
The SHAPE Off-Set Bracket will fit on the SHAPE Blackmagic Cage and Shoulder Mount.
The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig.
RED Komodo Top Plate
Tripod Head Pan Bar to ARRI Rosette
Délai habituel entre 8 et 12 semaines
Round Pipes Pack of 5 pieces
The Camera Side Bracket CSB-1R Extension is an extension to the Camera Side Bracket CSB-1R, providing additional attachment points. It features multiple 1/4-20, 3/8-16 and M4 mounting holes.
The Universal Adapter Plate UAP-3 is a small and flat staging platform for the ALEXA 35 top accessories, including the Lightweight Camera Handle LCH-1 and Center Camera Handle CCH-2. For more mounting options, the UAP-3 can be extended to the back with the TEB-1. The UAP-3 can also be attached to the base of the camera when an ultra-slim mounting plate is...
The Rosette Adapter RA-5 adapts a 3/8-16 anti twist interface to a 90° rotated rosette. Both pins can be unscrewed if necessary and stored in a parking position on the side of the bracket. The RA-5 can be mounted without tools by using the wing nut.
Rod Mounting Bracket RMB-8 Set. Includes K2.0034309 1x Rod Mounting Bracket RMB-8; K2.66255.0 1x 15mm Reduction Insert
Light Sleeper 56
The adjustable RSB-15 bracket support the rods of long zoom lenses for extra stability.
Rectangular adapters for clamp with 16mm tip
Kit to combine two slopes (two parts).
Délai habituel 6 semaines
Allows the DTS1830B and DTS1831 to be attached to a pan bar up to diameter 35mm
The ARRI Adapter Plate for Canon C200 is an intermediate plate in between the C200 camera body and either the Cine Plate for C300 MkII or the Broadcast Plate for C300 MkII
One pair diameter 19 mm - stainless steel - lightweight
The adjustable RSB-19 bracket support the rods of long zoom lenses for extra stability.
Theviewfinder adapter VFA-1 allows the mounting of Sony viewfinders to all Arri 3/8-16 interfaces.
Canon C200 Top Plate
Panasonic Au-Eva1 Top Plate
Nitze Lens Support 15mm LWS Rod (Designed for Periprobe only)
Mitchell Threaded Collar With Castle Nut
2" Coupler W/ Quick Release Mounting Plate Holder
Ergonomic designed wooden handgrip with a comfortable grip. Compatible with standard rosette
This H-cheeseplate is specifically designed for the Sony PXW-FS7 / FS7 II / FX9 and can be used in combination with the original handgrip of the Sony PXW-FS7 / FS7 mk II / FX9 cameras.
The left-hand Wooden Handgrip from Vocas provides a comfortable, contoured grip for your camera rig. This aluminum and wood grip mounts on any standard ARRI-style rosette.
Mount your DSLR or mirrorless camera to the SmallRig Advanced V-Mount Battery Mounting System and attach a power supply of your choice to your tripod-mounted or handheld rig.
Délai habituel entre 4 et 5 semaines
Round Mitchell Plate W/ Three Countersunk Holes
Round Mitchell Plate W/ Four Countersunk Holes
Rosette Arm (Short)
Délai habituel entre 8 et 12 semaines
Rosette Side Plate (URSA Mini, URSA Mini Pro / 12K)
Délai habituel entre 8 et 12 semaines
Telescopic Rosette Arm
Délai habituel entre 8 et 12 semaines
The Left-Side NATO Safety Bracket for Canon C70 from Wooden Camera offers protection, a detachable cable clamp, and multiple accessory mounts for your camera. This cage component mounts on the separately available Top Plate for C70.
Délai habituel entre 8 et 12 semaines
The kit includes a 15mm LWS rod bracket and an accessory block that provides 3/8"-16 anti-twist threads on three sides. The components mount together on top of the PDM-1.
Délai habituel entre 8 et 12 semaines
Handgrip rosette adapter for Panasonic AU-EVA1
SMALL HD Cheese Plate for Mounting Anton Bauer / V-Mount Brackets and other Accessories
Délai habituel entre 4 et 9 semaines
MultiPad Mini, small shoulder pad sliding on dia. 15mm rods with Rod Clamp 401-36
Hot Shoe Camera Handle
Délai habituel entre 8 et 12 semaines
Offset Mount and V-Lock Kit for Bolt 4K LT TX is a comprehensive kit that features a versatile mounting bracket for the Teradek Bolt 4K LT TX and a quick-release mounting dock for mounting directly to your camera.
Délai habituel entre 8 et 12 semaines
Shoulder Pad Kit
Délai habituel entre 4 et 5 semaines
15 mm Clamping block high for USBP-15 MKII
This 1 kg stainless steel counter weight can be mounted directly on to any standard 15 mm rails
Handgrip bayonet rosette adapter for Panasonic AU-EVA1
The cheese-style top handle attaches to a camera cage or rig using two 1/4"-20 screws that mount up to 1.24" apart in a sliding slot.
Stand plate BPL-11 (fp)
Délai habituel entre 6 et 8 semaines
Shoulder hand-held extension arm including cable for TILTA Sony FS5 Cage ES-T14
Délai de livraison de 4 à 6 semaines
Shoulder hand-held extension arm including cable for TILTA Cage ES-T26
Délai de livraison de 4 à 6 semaines
Add accessories to the right and left sides of your RED KOMODO cinema camera with this Left- & Right-Side Cage Bracket Kit from Vocas. The durable aluminum plates weigh only 1.4 oz each and mount on the right and left sides of the camera.
Tiltaing Advanced Right Side Wooden Handle Type IX - Black
Délai de livraison de 4 à 6 semaines
Tiltaing Advanced Left Side Wooden Handle Type IX - Black
Délai de livraison de 4 à 6 semaines
Tiltaing Advanced Right Side Wooden Handle Type XI - Black
Délai de livraison de 4 à 6 semaines
Tiltaing Advanced Right Side Wooden Handle Type VIII - Black
Délai de livraison de 4 à 6 semaines
Tiltaing Advanced Left Side Wooden Handle Type VIII - Black
Délai de livraison de 4 à 6 semaines
15mm LWS Baseplate for RED Komodo - Tilta Gray
Délai de livraison de 4 à 6 semaines
Tiltaing Advanced Left Side Wooden Handle Type XI - Black
Délai de livraison de 4 à 6 semaines
Tiltaing Advanced Right Side Wooden Handle Type X - Black
Délai de livraison de 4 à 6 semaines
Tiltaing Advanced Left Side Wooden Handle Type X - Black
Délai de livraison de 4 à 6 semaines
Add rod compatibility in order to mount matte boxes or follow focuses on your RED V-RAPTOR with the Tilta 15mm LWS Baseplate, which is custom-designed for the Tilta camera cage kit and installs via a quick release connection. The 1/4"-20 and 3/8"-16 mounting threads allow for compatibility with third-party quick release systems.
Délai de livraison de 4 à 6 semaines
15mm LWS Baseplate for RED Komodo - Black
Délai de livraison de 4 à 6 semaines
15mm LWS Baseplate for RED Komodo - Tactical Gray
Délai de livraison de 4 à 6 semaines
Sharing the exact same shape as its predecessor, the Visco Shoulder Pad offers the same clearance to studio support rods and bring substantial added comfort when filming long days on the shoulder.
The LWS-6 holds two 15 mm lightweight support rods. It is designed as an option to add lightweight rods to the Lightweight Camera Handle LCH-1 or to the Universal Adapter Plate UAP-3. When attached, rods are optically centered based on the lightweight rod standard and allow mounting further accessories like the Mini Viewfinder Bracket MVB-1, lens motors...
Base Plate for Light Weight Support Sony Universal (without rods and clamping)
Handgrip Extension
Rod clamp with knob for camera start/stop signal SONY F55 - compatible to leather handles 403-30, rods with diameter 15 mm etc.
Base Plate for Light Weight Support Sony Universal (without rods and clamping)
LW 15mm Bracket (RED DSMC2)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Rosette Handle (Rubber)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Rosette Handle (Brown Leather)
Délai habituel entre 8 et 12 semaines
Short balance dovetail plate MKII
Super Knuckle W/ Dia. 28mm Ball Head & 1/4"-20 Detachable Arri Locating Pin
A 3/8"-16 screw on one end of the extension can attach it to separately available connectors or other extension pieces. Multiple anti-twist 3/8"-16 and 1/4"-20 threads allow you to integrate articulating arms and on-camera monitors of your choice.
Délai habituel entre 8 et 12 semaines
Extension Grip GR-1
Light Sleeper 34
This compact and lightweight Stabilizer System Bracket can be mounted at the top of the ring of the TRINITY 2. The SSB-4 can be also mounted at the front and back of all SAM plates.
The SHAPE ROD BLOC + MAGIC ARM 11" hosts all standard 15mm rods and features CNC machined parts.
Separate cheese plate Aja Cion
This anodized aluminum rail measures 7mm thick and mounts to the bottom of your monitor from SmallHD. It adds several mounting points that you can use to mount various 3/8" & 1/4" accessories to your Cine 13 monitor.
Délai habituel entre 4 et 9 semaines
D-Box Sony Rialto Power Strip Replacement Y
Délai habituel entre 8 et 12 semaines
D-Box Sony Rialto Power Strip Replacement Y C
Délai habituel entre 8 et 12 semaines
Top Mount Only (RED Komodo, ARCA Swiss)
Délai habituel entre 8 et 12 semaines
UVF Extension XL (Rail Only)
Délai habituel entre 8 et 12 semaines
Add mounting for a 15mm rod to your NATO rail accessory with this NATO Rail to 15mm Viewfinder Bracket from Vocas. It features spring-loaded locking levers, so you can tighten or loosen the clamp without having to rotate the lever fully.
Use the Dovetail Adapter Plate for RED KOMODO & BMPCC 4K/6K from Vocas to slide your KOMODO or Blackmagic Pocket Cinema Camera 4K or 6K camera onto a Vocas USBP-15 Mk II or Quick Release Dovetail Plate.
Super Convi Clamp W/ Quick Release Mounting Plate Holder
Suction Cup With Swiveling Adapter Ks-103
Remote cable for Lanc 2,5 mm
CF carbon rods (set of 2) - diameter 19 mm - length 500 mm De Luxe version: diameter ground to 2/100 mm precision Weight: 123 g (pair).
CF carbon rods (set of 2) for lightweight support - diameter 15mm - length 500mm De Luxe version: Ground to 2/100 mm precision - with thread for extensions - weight 105 g (pair).
LWS Camera Platform Sony HXR-NX5 for combination with LWS Base 401-400 (new plate like 401-400A is included for replacement)
Rods - clamping and height adjustment for Light Weight Support for Sony
Rods - clamping and height adjustment (LWS) to be mounted on dovetail plate at stabilizing systems
Single Leather Handle - retrectable - swiveling and rotatable handles with HIRTH rosettes connection.
Bar (clamp onto diameter 15mm rods) with rosettes (Hirth) for use with handles
Rod clamp with knob for camera start/stop signal, Fischer 3pin RS connector for ARRI (diverse) + Moviecam SL+ Sony F35 + Pro35 Adapter + SI-2K - compatible to leather handles 403-30, rods with diameter 15 mm etc.
Handle for Chrosziel Cage Systems (e.g. 700-GH5), with 3/8"+1/4" threads, easily mounts on top or on the side of the Cage Frame. Optional use on dia. 15mm rods
The Plastic Shell is part of ARRI´s Handle Extension Family. It improves the haptic and can be attached directly to the HEX-5 or HEX-4 but also to combined shorter HEX through the slotted hole design.
Light Sleeper 33
Anodized Aluminium European Coupling
One pair diameter 15 mm - stainless steel - lightweight
The Cable Clamp works as a strain-relief for the cable which connects the ExtensionUnit to the Venice camera body and recording unit. It is compatible with the Side Bracket Right.
One pair diameter 19 mm - stainless steel - lightweight
Compatible with BroadcastPlate for Sony F5/F55 (K2.66261.0) and Universal Lightweight Support(ULB-4 - K2.47651.0)
15mm LWS Baseplate
Délai de livraison de 4 à 6 semaines
15mm LWS Baseplate - Tilta Grey
Délai de livraison de 4 à 6 semaines
OFFSET BRACKET FOR ENG BASEPLATE
Top Handle For Audio Configuration
Pumping Suction Cup With 51mm, Tube (34.5cm)
Sony PXW-FS7 / FS7 II dovetail adapter plate for USBP MKII
Canon EOS C200 dovetail adapter plate for USBP MKII
Separate handgrip (left hand)
This 15mm LWS rod system can be used to mount a battery plate, counterweight, or other camera accessory.
Michell Thread Collar and Castle Nut With Universal Gimbal Mount Adapter
Gimbal to Male Mitchell Tie Down Knob
LCD Monitor Loupe Support for Sony FX6
The HEX-5 is the longest part of ARRI´s Handle Extension Family. It follows the design of the Camera Center Handle CCH-4 and offers a number of 3/8-16 and RMB-3 interfaces. The different HEX can be connected in multiple ways in order to extend a top handle but also to build your own handle design. The Wooden and the Plastic Shell for HEX can be attached...
Light Sleeper 24
19mm carbon rods. Length: 430mm, 16.9in. TRINITY 2, ARTEMIS 2
Quick-release Motor Rod Clamp
Délai habituel entre 2 et 6 semaines
This clamp mounts onto the Front Plate of the Wooden Camera Top Plate System using the two included 3/8"-16 thumbscrews and it provides a dual 15mm rod clamp with standard LWS spacing.
Délai habituel entre 8 et 12 semaines
Add optional 15mm rods to the top of your Sony BURANO rig to mount a matte box, monitor, EVF, or follow focus using this Front 15mm LWS Dual-Rod Clamp from Wooden Camera.
Délai habituel entre 8 et 12 semaines
Accessory NATO Safety Rail (18")
Délai habituel entre 8 et 12 semaines
The bracket mounts on top of the PDM-1, allowing you to mount the module onto separately available 15mm rods. The rod bracket can also be mounted along with the optional Wooden Camera Accessory Block for PDM-1.
Délai habituel entre 8 et 12 semaines
The Rosette Standoff from Wooden Camera is a Sony-standard rosette that attaches to the right side of the Sony BURANO rosette via a male screw mount.
Délai habituel entre 8 et 12 semaines
This Front 15mm Dual Rod Clamp from Wooden Camera is designed to attach to the front of the quick release top plate for your Sony VENICE/VENICE 2/Rialto/Rialto 2 and provide upper 15mm rod clamps for accessory integration.
Délai habituel entre 8 et 12 semaines
Unified Baseplate Camera Dovetail (Canon C700)
Délai habituel entre 8 et 12 semaines
Unified Baseplate Camera Dovetail (Sony Venice, Rialto, F55, F5, URSA Mini)
Délai habituel entre 8 et 12 semaines
Unified Baseplate Camera Dovetail (Sony FX9, FS7, FS7mkII, Canon C100mkII, C300mkII, C100, C300, C500)
Délai habituel entre 8 et 12 semaines
Gold Mount (Dual D-Tap)
Délai habituel entre 8 et 12 semaines
Mounting Atomos monitor to you camera, cage or rig via the 3/8" with the included AtomX hex spanner
Soft shoulder pad for the USBP-15 MKII. The standard shoulder pad has an integrated magnetic system, which allows you to easily connect the pad underneath the USBP-15 MK II, without using any tools.
The durable support mounts onto the front of the camera at four points around the adapter. The support secures around the RF-to-PL lens adapter using the included spring-loaded locking thumbscrew.
Lighter and thinner version of sleepers. Two red anodized aluminium tightening wheels included.
The Rod Mounting Bracket RMB-8 is a compact designed 19mm rod mount with 3/8-16 two pin interface (15mm rod via existing reduction insert K2.66255.0). The RMB-8 is equipped with a captive ARRI Multi HEX screw that allows the use of 3,4, 5, and 5/32 HEX keys.
Arm Connector
RMB-3 provides support for a single 19mm rod or viewfinder mount (cross pipe). RMB-3 is designed to be mounted to MAP-1, MAP-2 or directly on the ALEXA Mini body. Compatible with 15mm rods by using the 15mm reduction insert (K2.66255.0)
Three 46 mm tall feet that allow the use of the LMS-3 with ALEXA Studio or ALEXA XT Studio with the Optical Universal Viewfinder OVF-1 attached.
15mm counterweight
Délai de livraison de 4 à 6 semaines
F970 Battery Baseplate - Tilta Grey
Délai de livraison de 4 à 6 semaines
Full Camera Cage
Délai de livraison de 4 à 6 semaines
Full Camera Cage - Tilta Grey
Délai de livraison de 4 à 6 semaines
Tiltaing EVF Extension Bracket - Black
Délai de livraison de 4 à 6 semaines
The adapter allows you to relocate your handgrip elsewhere or add a rosette accessory with an M6 thread.
1-1/8" (28mm) Junior Pin to Elemack/euro Adapter(M12)
1-1/8" (28mm) Junior Pin to Elemack Adapter
The Shape Counter Weight is a professional video accessory that augments stability of a camera support by balancing or counterweighing the camera at the rear.
The Shape Double Sliding Rod Block allows you to add a 2nd level of 15mm rods for setting up additional accessories such as follow focus mechanisms, 35mm lens adaptors, and matte boxes.
The SHAPE Quick Release V-Lock Adapter attaches to the camera platform of your tripod, monopod, or support rig, providing a standard V-lock mounting interface.
Light Sleeper 14
Handgrip combi rail bracket, for use on both 19mm and 15mm rails, for single or double sided use.
Central bracket for Sony Alpha 7
This kit includes one 4 x 1.5" plate with a 3/8"-16 screw, one 2 x 2" plate with a 3/8"-16 screw, and one 2 x 2" plate with a 1/4"-20 screw.
Délai habituel entre 8 et 12 semaines
Front Docking Fork Dai. 45mm Opening
Pumping Suction Cup With 51mm, Tube(25cm)
This microphone holder is made for medium to lightweight microphones with a diameter of 19 - 25 mm.
This support requires the separately available Vocas side plates for the RED KOMODO to mount it using four captive screws.
Secure your Canon EF-EOS R 0.71X lens adapter onto your RED KOMODO camera rig using this Support for Canon EF-EOS R 0.71X Lens Adapter from Vocas.
Handle Bar plus proVideo (w. 220mm) for use with LWS. With clamping lever for rods with diameter 15mm (tool-free adjustable). For light weight video cameras and HDSLR cameras in conjunction with Shoulder Pad proVideo (3035 or 3034).
Mounting device (pair) for use of handles with Hirth rosettes at LWS base 401-45x
MultiPad 15 Padding - pad only - for use with diameter 15 mm rods
TOP HANDLE HOT SHOE DSLR
Handgrip, with soft comfortable leather handle. Can be used on both sides of the rail bracket.
Separate cheese plate Sony PXW-FS7 MKII
SmallRig Dual Handgrip for ZHIYUN CRANE 3S Handheld Stabilizer 2857 is designed to reduce arm fatigue, especially during long shooting sessions and provide some extra accessory mounts when shooting with your CRANE 3S. The dual handgrip locks onto the 3S via a 3/8 inches-16 screw and two locating pins to prevent twisting.
Délai habituel entre 4 et 5 semaines
The 19mm Bolt-On Accessory Rod Kit with 3/8"-16 threads, from Wooden Camera, combines 1.5, 3, and 5" 19mm bolt-on rods. Use the rods in this kit to customize your camera rig for mounting accessories like lens motors, handgrips, and other rod-mounted components.
Délai habituel entre 8 et 12 semaines
The 15mm Bolt-On Accessory Rod Kit with 3/8"-16 threads from Wooden Camera includes 1.5, 3, and 5" 15mm bolt-on rods. Each rod features secure anti-twist locating pin mounting.
Délai habituel entre 8 et 12 semaines
The HEX-4 is part of ARRI´s Handle Extension Family. It follows the design of the Camera Center Handle CCH-4 and offers a number of 3/8-16 and RMB-3 interfaces. The different HEX can be connected in multiple ways in order to extend a top handle but also to build your own handle design. The Wooden and the Plastic Shell for HEX can be attached directly to...
The 15mm Bolt-On Accessory Rod Kit with 1/4"-20 threads from Wooden Camera includes refurbished 1.5, 3, and 5" 15mm bolt-on rods.
Délai habituel entre 8 et 12 semaines
The Back Plate can be mounted either at the top or at the bottom of the back and it is also compatible with the Repeater Unit (an extension cable) for either horizontal or vertical attachment. It offers plenty of interfaces (1/4-20; 3/8-16 with anti-twist pin holes).
The Rod Mounting Bracket RMB-6 expands camera set-ups opportunities by offering strong support to rod-mounted camera accessories such as lens motors, image transmitters or ultrasonic distance devices.
Tiltaing Advanced Right Side Wooden Handle - Black
Délai de livraison de 4 à 6 semaines
Tiltaing Advanced Left Side Wooden Handle - Black
Délai de livraison de 4 à 6 semaines
Adjustable Top Handle for Sony FX6 - Tactical Gray
Délai de livraison de 4 à 6 semaines
Nucleus-Nano Motor Kit 2
Délai de livraison de 4 à 6 semaines
Adjustable Top Handle for Sony FX6
Délai de livraison de 4 à 6 semaines
Tiltaing Left Side Advanced Power Handle with Run/Stop (F570 Battery) - Black
Délai de livraison de 4 à 6 semaines
Tiltaing Right Side Advanced Power Handle with Run/Stop (F570 Battery) - Black
Délai de livraison de 4 à 6 semaines
Nucleus-Nano Hand Wheel Controller
Délai de livraison de 4 à 6 semaines
Tiltaing Left Side Advanced Power Handle with Run/Stop (F570 Battery) - Tilta Gray
Délai de livraison de 4 à 6 semaines
Leather handgrip short with soft comfortable grip (left hand)
Vocas Separate 15 mm balance plate
Side plate for Sony VENICE 2. With many industry standard 3/8" and 1/4" threaded holes. Attaches to the side of the camera and allows the mounting of accessoires to the side of the camera.
Add this Top or Bottom Bracket from Vocas to the top or bottom of your RED KOMODO camera to mount optional tripod plates, top handles, extension arms, or 15mm rod mounts.
This lightweight Compact Mini Top Handle with 15mm Rod Mount from Vocas quickly mounts onto your camera, cage, or rig with a 15mm top or side rod using its single 15mm rod clamp.
The support requires the Vocas top cheese plate for the FX6 to mount it using the two captive 1/4"-20 screws.
150mm Bowl Tie-down
HDMI Lock System and Top Plate Kit for ATOMOS NINJA V 5'' Monitor Recorder
Offset V-Lock Kit (Screw Slot and ARRI Mount 3/8-16)
Délai habituel entre 8 et 12 semaines
Create a handle that best suits your Sony VENICE series camera rig using this Front Ultra Handle Connector from Wooden Camera thanks to its modular design. Attach this connector to the front of your Sony VENICE top plate using the two mounting screws at the base.
Délai habituel entre 8 et 12 semaines
Create a handle that best suits your handheld camera rig using this Universal Front Ultra Handle Connector from Wooden Camera thanks to its modular design.
Délai habituel entre 8 et 12 semaines
The HEX-90 is part of ARRI´s Handle Extension Family. It can be used to extend the handle system behind the camera or battery downwards to build a so-called "Hollywood Handle". This allows to operate the camera from the back without touching the on-board battery.
Bracket to attach a on-camera microphone to the camera handle. Includes 3/8' and 1/4' knurled fasteners.
The LAS-1 is an optional solution that offers sturdy support to an extensive range of third party lens adapters with pillar support e.g., PL or EF. Some optical adapters such as the Metabones Speedbooster are also supported.
Add a compact, lightweight, and modular V-mount battery plate to your rig SmallRig's updated Compact V-Mount Battery Mounting System and attach it to your tripod-mounted or handheld rig.
Délai habituel entre 4 et 5 semaines
Right cage side for the Canon EOS C200 cage kit (0600-0050). The right cage side provides additional mounting points for ¼ accessories
Mini Electric Vacuum Pump for 10" Suction Cup
Can be used on the front, top, side or rear of our sliding Top Handle. Attaches directly to any 3/8" industry standard hole.
Can be used on the front, top, side or rear of our Sliding Top Handle. Attaches directly to any 3/8" industry standard hole.
Can be used on the front, top, side or rear of our Sliding Top Handle. Attaches directly to any 3/8" industry standard hole.
This bracket can be mounted on any Arri style 3/8 hole, offering a connection to a 19 mm rail.
QuickLock FixingClamp for LWS 401-C300MKIIA for ? 15 mm rods. Provides additional rear rod stability of the LWS 401-C300MKIIA when used with QuickLock Plate (401-130)
Round Cheese Plate for 10" Suctioncup
RED Komodo Hinge Mount
Délai habituel entre 4 et 9 semaines
Rear VCT-14 clamping block
Vision Lock W/ Arri Style 3/8"-16 Spacer
48.3mm x 10mm Multi-starter
Sony FX6 top plate
Suction Cup With Swivel Baby Pin
Suction Cup With Swiveling 16mm Baby Socket
Pumping Suction Cup With 51mm, Tube(8cm)
Junior Pin With Universal Gimbal Mount Adapter
One pair diameter 15 mm - stainless steel - lightweight
The RA-4 rosette adapter allows accessories fitting to ARRI rosette to mount to diameter19mm rods, with an extension of 60mm
One pair diameter 19 mm, stainless steel, lightweight
The Rod Mounting Bracket RMB-7 provides support for a single 19 mm support rod (or 15 mm with reduction insert K2.66255.0). Often used with lens motors, the RMB-7 is optimized for ARRI TRINITY and TRINITY 2. The RMB-7 mounts to M4 threads spaced 20 mm apart.
The Top Extension Bracket TEB-1 extends the Low Mode Support LMS-4 or Universal Adapter Plate UAP-3, so more accessories, including the Rear Accessory Bracket RAB-2 and Articulated Mounting Plate AMP-1, can be mounted to the camera's top and back. Its design ensures that the camera's top ventilation output remains unobstructed.
The Adjustable Top Plate for M?VI connects any top accessory plate with two 3/8-16 or two 1/4-20 attachment points quickly to a M?VI Pro or M15 rig.
19mm carbon rods. Length: 305mm, 12in. TRINITY 2, ARTEMIS 2
The classic handle extension collection from our PCA range now include an elegant piece optimized for the ALEXA 35 Production Set CCH-5 handle.
Top Plate
1/4-20 Screw Mounting Slot to Arri Standard Rosette Adapters (pair)
Délai de livraison de 4 à 6 semaines
Sony 8T to 15 mm viewfinder bracket
SHAPE's CP33 Multi-Purpose Mounting Cheese Plate will let you add various accessories and devices to your camera rig.
Wooden Camera - Rod Clamp (15mm LW)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Rod Clamp (15mm)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Rod Clamp (19mm)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Safety NATO Rail (70mm)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Safety NATO Rail (150mm)
Délai habituel entre 8 et 12 semaines
NATO Rosette (ARRI)
Délai habituel entre 8 et 12 semaines
Wooden Camera - NATO Clamp
Délai habituel entre 8 et 12 semaines
NATO ARRI 70mm Rail (1.67" Screw Channel)
Délai habituel entre 8 et 12 semaines
Canon Accessory Rod Bracket 15mm LW
Délai habituel entre 8 et 12 semaines
The Back Plate 2 can be used as a single part or as an adapter to attach the Back Plate to it. When used in combination with the Back Plate, the rear body of the Extension Unit 2 is at the same level as the Back Plate. This allows more flexibility when attaching accessories.
Add this Cheese-Style Expansion Plate to your Wooden Camera Quick Release Top Plate to increase the amount of mounting threads on your Sony VENICE 2 camera.
Délai habituel entre 8 et 12 semaines
This 15mm Dual Rod Clamp from Wooden Camera is designed to attach to the top of the quick release top plate for your Sony VENICE/VENICE 2 and provide upper 15mm rod clamps for accessory integration.
Délai habituel entre 8 et 12 semaines
Integrate 15mm rods into your Wooden Camera Faceplate Cage System using this 15mm Dual Rod Clamp.
Délai habituel entre 8 et 12 semaines
This bracket mounts on top of the separately available Ultra Handle and provides two cable extensions for the original Wi-Fi antennas to mount on top of the handle, improving your reception and freeing up mounting space on the back of the camera.
Délai habituel entre 8 et 12 semaines