Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
Phono (RCA) Plug Adapter with gold-plated contacts. They have a black and red marking ring. The adapters are sold in pairs.
3 pole female receptacle, crimp termination (Standard B-Crimp), black metal housing, silver contacts
3 pole female receptacle, solder contacts, Nickel housing, silver contacts
4 pole male cable connector with Nickel housing and silver contacts
4 pole male receptacle, solder contacts, black metal housing, gold contacts
4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount
3 pole male receptacle, horizontal PCB mount, Nickel housing, silver contacts, M3 mounting holes
5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount
Cable Con. Female 3pole B W/o Boot
3 pole male cable connector with black metal housing and gold contacts
3 pole female receptacle, crimp termination (Standard B-Crimp), Nickel housing, silver contacts
3 pole male receptacle, vertical PCB mount, nickel housing, silver contacts, M3 mounting holes
Phono (RCA) Jack adapter with gold-plated contacts.
3 pole male receptacle, crimp termination (Standard B-Crimp), black metal housing, silver contacts
3 pole male receptacle, solder cups, black metal housing, gold contacts
3 pole male receptacle, solder cups, black metal housing, gold contacts
4 pole TINY xlr female cable connector with screw locking, black metal shell and nut, gold plated contacts
3 pole female receptacle, solder cups, black metal housing, silver contacts
Phono socket in black chrome D-shape housing, green isolation washers, solder version
3 pole female receptacle, solder cups, Nickel housing, silver contacts, M3 mounting holes
3 pole female cable connector with black metal housing and silver contacts
This black speaker cable features a high flexibility, Speakonflex, 2 x 4 mm2, outer diameter 9,2 mm. Price / meter.
3 pole male receptacle, solder cups, Nickel housing, silver contacts, M3 mounting holes
Speaker cable with FRNC jacket, 2 x 4 mm2, outer diameter 9,2 ± 0,4 mm, black, flame-retardant according to IEC 60332-1, wire insulation PE. Price / meter.
3 pole female receptacle
Hook and Loop Cable Tie 700 x 50mm
3 pole female cable connector with Nickel housing and silver contacts
3 pole male cable connector with black metal housing and gold contacts
3 pole male receptacle, solder cups, black metal housing, silver contacts
4 pole male receptacle, solder contacts, Nickel housing, silver contacts
2 pole combination of speakON socket and 1/4" jack receptacle, horizontal PCB mount, same PCB footprint and panel cut out as NL4MD-H
3 pole female cable connector with black metal housing, silver contacts and crimp termination (standard B crimp)
3 pole male receptacle, crimp termination (Standard B-Crimp), Nickel housing, silver contacts
3 pole male cable connector with black metal housing and silver contacts
Speaker Cable, Draka 2 x 2.5 mm2, halogen free, flame-retardant according to IEC 60332-1, wire insulation FRNC. Price / meter.
Cablecon 2pole FXX Speakon Small
3 pole female receptacle, solder cups, Nickel housing, silver contacts
3 pole male receptacle, solder cups, black metal housing, silver contacts
4 pole male receptacle, solder contacts, black metal housing, silver contacts. Smallest available traditional style metal panel mount connector with large solder cups for ease hard wiring.
Loudspeak. Con. Ultra High Current
3 pole female receptacle, solder cups, black metal housing, silver contacts. Universal D-size metal body XLR panel mount series. UL recognized component.
3 pole 3.5 mm audio plug, solder termination, chuck type strain relief, bushing, nickel housing, nickel contacts
Speakercable 2x1.5mm2, Cca s1a-d0-a1
5 pole TINY xlr female cable connector, black metal shell, water resistant due to rubber sealing boot, gold plated contacts
3 pole female receptacle, solder cups, Nickel housing, silver contacts, retention spring instead of latch
3 pole female cable connector with Nickel housing, silver contacts and crimp termination (standard B crimp).
4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, color coding possible
Litt System cable. 8 colour coded wires. Priced per meter. Perfectly fits Litt base connectors
3.5 mm Stereo 3 pole threaded chassis socket, solder-contacts and fastening nut, max. wall thickness 2.7 mm
4 pole chassis connector, black D-size flange, mirrored self tapping screw holes (A-screw), horizontal PCB mount.
2 pole 1/4 inch professional phone plug, gold contacts, black shell
3 pole male receptacle, solder cups, Nickel housing, silver contacts, M3 mounting holes
3 pole male receptacle, solder contacts, Nickel housing, silver contacts
3 pole female receptacle, solder cups, Nickel housing, silver contacts
3 pole male cable connector with black metal housing and silver contacts
4 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, color coding possible
Insert 6pole XLR Male Au
3 pole male receptacle, solder cups, Nickel housing, silver contacts
2 pole Cable connector with chuck and blue bushing, intermates with 4 pole chassis connector and makes contact with +1/-1
Speakon Chassis 2Pole H
3 pole female cable connector with Nickel housing and silver contacts.
Cable Con. Male 3pole B W/o Boot
Grommet, Plug Strain Relief
Délai de livraison habituel 4 semaines
3 pole XLR female receptacle with 1/4 inches switching stereo jack and switching ground contact, horizontal PCB mount
4 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount
3 pole XLR female receptacle with 1/4 inches switching stereo jack, vertical PCB mount. XLR / jack hybrid chassis connector combining 3 pole XLR receptacle and 1/4 inches jack.
3 pole XLR female receptacle with 1/4 inches switching stereo jack, solder cups for wire termination. XLR / jack hybrid chassis connector combining 3 pole XLR receptacle and 1/4 inches jack.
1/4 inches Stereo dual jack, full nose, mounting screw included
3 pole male receptacle, solder contacts, black metal housing, gold contacts
Hook and Loop Cable Tie 500 x 50mm
Kramers A35M series mini audio cables are constructed from high-quality shielded pair style cable terminated with molded male 3.5mm stereo connectors on both ends.
3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, vertical PCB mount, additional ground contacts
3 pole male cable connector with Nickel housing and silver contacts
4 pole chassis connector, black D-size flange, self tapping screw holes (A-screw), horizontal PCB mount.
3 pole male cable connector with black metal housing, silver contacts and crimp termination (standard B crimp).
3 pole XLR female receptacle with 1/4 inches switching stereo jack, horizontal PCB mount. XLR / jack hybrid chassis connector combining 3 pole XLR receptacle and 1/4 inches jack.
4 pole TINY xlr female cable connector, black metal shell, water resistant due to rubber sealing boot, gold plated contacts
1/4 inches professional phone plug, 2 pole, nickel contacts, nickel shell
3 pole XLR female receptacle with 1/4 inches switching stereo jack, vertical PCB mount, retention spring. XLR / jack hybrid chassis connector combining 3 pole XLR receptacle and 1/4 inches jack.
Connector powerCON TRUE1 M 3P, 20A, flat tab terminals F4.8, blue
3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, horizontal PCB mount, additional ground contacts
3 pole male cable connector with Nickel housing, silver contacts and crimp termination (standard B crimp).
5 pole TINY xlr female cable connector, black metal shell, gold plated contacts
3 pole female cable connecto W/O boot
3 pole male receptacle, solder contacts black metal housing, silver contacts
3 pole 1/4 inches cable jack, full metal, max. cable O.D. 6 mm
Multipair audio cable, 2 x 2 x 0.22 mm2, screened and insulated pairs, outer diameter 7,2 mm ± 0,5 mm. Price / meter.
This new adapter connects a 3.5 mm stereo jack to a 3.5 mm stereo jack. In modern technology with iPod & Co. an ideal accessory for longer distances, especially when used with mini-plug cables.
3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, black chrome shell
5 pole DIN cable connector, gold plated shell and contacts
3 pole male cable connector with Nickel housing and silver contacts.
3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, additional ground contacts
3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, additional ground contacts
This connector is fully compliant to the device standard IEC 62368-1, due to its component certification according to IEC 60320-1.
5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount
Swissflex Prem. Instr. Cable PVC 1x0.5mm2
5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount
5 pole TINY xlr male cable connector, black metal shell, gold plated contacts
Chassis connector female 3 pole, horizontal pcb mount
1/4 inches Stereo dual jack, full threaded nose
3 pole male receptacle, solder contacts, Nickel housing, silver contacts
LRX converts a standard 2 or 4 pole SPX speakON into a right angle cable connector, without removing the cable from the insert.
5 pole XLR male contact holder with gold-plated contacts without housing
4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring instead of latch, color coding possible
Appliance inlet connector, 3/16" flat tab terminals, blue, without insulation divider
3 pole TINY xlr female cable connector, black metal shell, water resistant due to rubber sealing boot, gold plated contacts
3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount
2 pole 1/4 inches professional phone plug, nickel contacts, black shell
5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount
4 pole TINY xlr female cable connector, black metal shell, gold plated contacts
Speaker Cable, Speakonflex, 2 x 2.5 mm2, outer diameter 8 mm, high-flexible, black. Price / meter.
4 pole chassis connector, black D-size flange, mirrored self tapping screw holes (A-screw), vertical PCB mount.
Analog Swissflex Premium Microphon cable, 2 x 0.50 mm2 , double spiral shielded, PVC jacket, black, outer diameter 6.8 mm. Price / meter.
Rugged, balanced microphone cable AES / EBU, 1 pair, 2 x 0.22 mm2, with spiral shield, amplified with Kevlar dummy elements, outer diameter 6.5 mm, with Rugged, balanced microphone cable AES / EBU, 1 pair, 2 x 0.22 mm2, with spiral shield, amplified with Kevlar stranded wires, outer diameter 6.5 mm, with DMC Flex PUR jacket, 110 Ohm. Price / meter.
4 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, color coding possible
4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, Retention spring instead of latch, color coding possible
3 pole male cable connector W/O boot
3 pole XLR female receptacle with 1/4 inches stereo jack without switching contact, horizontal PCB mount. XLR / jack hybrid chassis connector combining 3 pole XLR receptacle and 1/4 inches jack.
3 pole female cable connector with Nickel housing and silver contacts, without boot. Boot must be ordered separatly.
4 pole chassis connector, black round G-size flange, countersunk thru holes, 3/16" flat tabs.
3 pole XLR female receptacle with 1/4 inches stereo jack without switching contact, solder cups. XLR / jack hybrid chassis connector combining 3 pole XLR receptacle and 1/4 inches jack.
Gold-plated phono (RCA) chassis mount sockets with a drill hole of 6.5 mm. They're available in pairs.
3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount
3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, horizontal PCB mount, black chrome shell
4 pole TINY xlr male cable connector, black metal shell, gold plated contacts
3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount
Bantam Cable, Swissflex, 2 x 2 x 0.19 mm2, outer diameter 2 x 4 mm, spiral shield, black, halogen free, adjustment: K/HS
3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount
3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount
2 pole chassis connector, black D-size flange, countersunk thru holes, 3/16" flat tabs. Does not intermate with the 4-pole cable connector.
2 pole combination of speakON socket and 1/4" jack receptacle, vertical PCB mount, same PCB footprint and panel cut out as NL4MD-V
3 pole XLR female receptacle with 1/4 inches mono jack without switching contact, horizontal PCB mount. XLR / jack hybrid chassis connector combining 3 pole XLR receptacle and 1/4 inches jack.
3 pole XLR female receptacle with 1/4 inches mono jack without switching contact, solder cups for wire termination. XLR / jack hybrid chassis connector combining 3 pole XLR receptacle and 1/4 inches jack.
speakON panel 4 Pole HI END
The speakON panel mount connectors are the standard chassis connectors for loudspeaker / amplifier interconnections. They feature a unique metal locking system, making contact only once fully locked. The speakON receptacles are robust, versatile and easy to terminate.
3 pole XLR female receptacle with 1/4 inches stereo jack without switching contact, vertical PCB mount. XLR / jack hybrid chassis connector combining 3 pole XLR receptacle and 1/4 inches jack.
3 pole female XLR receptacle. Retention spring.
3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, lateral right PCB mount
2 pole 1/4 inches cable jack, full metal, max. cable O.D. 6 mm
3 pole XLR female receptacle with 1/4 inches mono jack without switching contact, vertical PCB mount
3 pole female XLR receptacle
Phono plug, gold plated shell and contacts
NAM6 is a gooseneck adapter with 3/8'' inside thread, 5/8'' 27 UNS outside thread, material is brass
3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, vertical PCB mount
4 pole chassis connector, black D-size flange, self tapping screw holes (A-screw), vertical PCB mount.
Chass. Con. Male 3P H SW
Black, 2-pair microphone cable with 2 x 2 x 0.19 mm2, PVC jacket, double spiral shield and an outer diameter of 5.4 mm. Due to the 4-stranded assembly, the cable guarantees an interference-free transmission even over longer distances. Price / meter.
Grey 110 ohm AES/EBU multi-pair cable, 1 x 2 x 0.56 mm2, foil screened and with insulated pairs as well as with overall braided shield, for fixed installations and analogue and digital transmissions. With bare copper wire, FRNC-C jacket and an outer diameter of 4.6 mm.Price / meter.
4 pole chassis connector, black D-size flange, countersunk thru holes, vertical PCB mount.
5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount
Phono jack, gold plated contacts, Yellow
Phono jack, gold plated contacts, Green
Phono jack, gold plated contacts, Blue
Phono jack, gold plated contacts, Black
Phono jack, gold plated contacts, Red
2 pole 1/4 inches jack for thick panels, long-threaded bushing with washer and nut, full metal
Phono jack, gold plated contacts, White
2 pole 1/4 inches plug, black plated long diecast handle, gold plated contacts
3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, steel retention lug, vertical PCB mount
3 pole TINY xlr female cable connector, black metal shell, gold plated contacts
Speaker cable with FRNC jacket, 2 x 1.5 mm2, outer diameter 6.2 ± 0.4 mm, flame-retardant according to IEC 60332-1, CPR: Eca, wire insulation PEE. Price / meter.
3 pole TINY xlr male chassis connector, rearmountable, nickel housing, gold plated contacts, max. panel thickness: 3 mm
SPEAKON PANEL 4POLE V
3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, horizontal PCB mount
3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, steel retention lug, horizontal PCB mount
Microphone - Cable, 1 pair, (2x 0.22 mm2), AES/EBU with spiral shield, DMC Flex PVC jacket, black, amplify with Kevlar dummy elements, outer diameter 6,5 mm, adjustment: W, 110 Ohm. Price / meter.
3 pole male cable connector, Nickel housing and silver contacts, without boot. Boot must be ordered separatly.
Black, balanced microphone cable, 2 x 0,22 mm2, with FRNC jacket, compliance: CE, EN 50575:2014+A1:2016, CPR: Dca, with double spiral shield and Visco wires, with an outer diameter of 5.8 mm. Price / meter.
3 pole TINY xlr male cable connector, black metal shell, gold plated contacts
Phono plug, black shell, gold plated contacts, rubber boot for best antikink protection, chuck type strain relief for cable O.D. 3.5 to 6.1 mm, Black.
3 pole 1/4 incheses jack for thick panels, long-threaded bushing with washer and nut, full metal
Phono plug, black shell, gold plated contacts, Red
Phono plug, black shell, gold plated contacts, White
Phono plug, black shell, gold plated contacts, Blue
Phono plug, black shell, gold plated contacts, Green
Phono plug, black shell, gold plated contacts, Yellow
4 pole chassis connector, black D-size flange, self tapping screw holes (A-screw), 3/16" flat tabs.
All metal connecting module, outer thread M 17x1
Phono dual adapter, female - female, hard gold plated
3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, steel retention lug, horizontal PCB mount
3 pole 3.5 mm plug, black metal handle, gold plated contacts
3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, steel retention lug, vertical PCB mount
3.5 mm plug, 3 pole, black metal handle, gold plated contacts, up to 8 mm cable diameter
3 pole 1/4 inches plug, long diecast handle
Module with switching contacts for NYS-SPP-L1. Solution for insert jack of mixing consoles, Split print by-passes the use of a special wired Y-Cable.
4 pole chassis connector, black D-size flange, countersunk thru holes, 3/16" flat tabs.
Bantam Cable, Swissflex, 4 x 0.22 mm2 + spiral shield, outer diameter 4.7 mm. Price / meter.
3 pole XLR female contact holder with gold-plated contacts without housing
7 pole DIN cable connector, gold plated contacts
Bantam Cable, Swissflex, 2 x 2 x 0,19 mm2, outer diameter 2 x 4 mm, spiral shield, black. Price / meter.
Black, dual Siam instrument cable, 2 x 1 x 0.22 mm2, with spiral shield, PVC jacket and an outer diameter of 2 x 4 mm.
Microphone cable with 2 x 0.22 mm2, double spiral shield and Visco wires, PVC jacket and with an outer diameter of 6 mm
1/4 inches stereo jack, switched, with chrome ferrule and offset PCB pins, mounting nut included, Gold plated contacts
The rubber sealing cover protects D-Type chassis connectors from dust and water according to protection class IP65. Suitable for: XLR D Series male
Special Adapter, Phono (RCA) Jack female to BNC male, with gold-plated contacts
3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount
5 pole DIN cable connector, gold plated contacts
3 pole 3.5 mm plug to 3 pole 1/4 inches jack adapter, all metal
3 pole male contact holder with gold-plated contacts but without housing
3 pole 1/4 inches jack for thick panels, special designed head for guitar strap, long-threaded bushing with washer and nut, full metal
3 pole 1/4 inches right angle plug, metal housing, plastic bushing
3 pole 3.5 mm plug, black metal handle
3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, lateral left PCB mount
1/4 inches stereo jack, switched, full threaded nose, straight PCB pins, gold plated contacts, mounting nut included
2 pole 1/4 inches plug to plug adapter, full metal
3 pole 1/4 inches jack to jack adapter
3 pole DIN cable connector, gold plated contacts
3 pole 1/4 inches plug, short metal handle
3 pole 3.5 mm plug, metal handle, gold plated contacts
2 pole 3.5 mm plug, black metal handle, gold plated contacts
Speaker Cable, 2 x 1.5 mm2, outer diameter 6.2 ± 0.2 mm, high-flexible, black. Price / meter.
2 pole 1/4 inches plug, long diecast handle
1/4 inches stereo jack, metal nose, gold plated contacts, efficient chassis ground connection, T+R+S normalling contact
3 pole 3.5 mm cable jack, black metal handle, gold plated contacts, max. cable O.D. 4 mm
Phono plug, nickel plated shell, gold plated contacts
Mono 1/4" right-angle plug with pan head
Gasket for speakON G-size housings for an airtight connection between chassis and frontpanel (also suitable for Amphenol EP cutouts).
Ruber-cap inc string + eye 4 chassis fix
3 pole XLR female receptacle with 1/4 inch stereo jack, horizontal PCB mount. XLR / jack hybrid chassis connector combining 3 pole XLR receptacle and 1/4 inch jack in the smallest available XLR housing.
3 pole XLR female receptacle with 1/4 inch stereo jack, vertical PCB mount. XLR / jack hybrid chassis connector combining 3 pole XLR receptacle and 1/4 inch jack in the smallest available XLR housing.
2 pole 3.5 mm plug, black metal handle with crimp strain relief
3 pole 3.5 mm cable jack, metal handle, max. cable O.D. 6 mm
Black bantam cable (Swissflex) with 2 x 0.22 mm2, spiral shield, PVC jacket and an outer diameter of 4.7 mm. Price / meter.
3 pole male receptacle, plastic
Yellow lettering plate for D-shape-connectors
White lettering plate for D-shape-connectors
Violet lettering plate for D-shape-connectors
Red lettering plate for D-shape-connectors
Orange lettering plate for D-shape-connectors
Green lettering plate for D-shape-connectors
Brown lettering plate for D-shape-connectors
Blue lettering plate for D-shape-connectors
Black lettering plate for D-shape-connectors
Gray lettering plate for D-shape-connectors
3 pole XLR female receptacle with 1/4 inches stereo jack, horizontal PCB mount, retention spring. XLR / jack hybrid chassis connector combining 3 pole XLR receptacle and 1/4 inches jack in the smallest available XLR housing.
3 pole XLR female receptacle with 1/4 inches stereo jack, vertical PCB mount, retention spring. XLR / jack hybrid chassis connector combining 3 pole XLR receptacle and 1/4 inches jack in the smallest available XLR housing.
3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, lateral right PCB mount
1/4 inches stereo jack, switched, with chrome ferrule and standard solder lugs, mounting nut included
The ZNK 2/3 cable is very thin and therefore matches the nanoCON Series best. It is also recommendable for installations with little space in the cable duct or for use in medical technology. The transmission mode is analogue and the cables have balanced signals. Price / meter.
Phono cable jack, gold plated contacts, black plated shell
3 pole open 1/4 inches jack, 3 contacts, with washer and nut, panel thickness 3.5 mm, with 0.205 inches faston tabs
3 pole 1/4 inches plug, plastic handle with flexible strain relief
3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, lateral right PCB mount
3 x switching (normalling) stereo jack (T/TN/R/RN/S/SN). Vertical PCB mount panel jack in A-gauge version with gold plated contacts and unique quick fixing cap for rapid panel mounting. Separation of mechanical latch and electrical contacts offers high retention force combined with low insertion force
Rubber frame to mount between the front plate and the rear verticale print, for airtight vertical XLR A and B Series chassis connectors
2 pole 1/4 inches plug, short metal handle
1/4 inches stereo jack, metal nose with efficient chassis ground connection, T+R+S normalling contact
Thumbscrew to ND-AMX-HAUBE M2.5
Black microphone cable (Swissflex NK2) with 2 x 0.22 mm2, spiral shield, PVC jacket and an outer diameter of 6.5 mm. Price / meter
Balanced, digital single pair microphone cable, with an inner conductor of 2 x 0,22 mm2, according to AES/EBU with spiral shield for mobile applications. The 110 ? (ohm) cable with DMC Flex PVC jacket has an outer diameter of 6.5 mm. price / meter.
Black, unbalanced instrument cables (Swissflex NK1) with 1 x 0.22 mm2, spiral shield, PVC jacket and an outer diameter of 6.2 mm. Price / meter.
Thumbscrew to ND-AMX-HAUBE UNC
Bantam cable (Swissflex) with 2 x 0.22 mm2, spiral shield, PVC jacket and an outer diameter of 4.7 mm.
Chass.Con.Male 3P. V Panelisol.
1/4 inches stereo jack, switched, gold plated contacts, fully threaded nose, sleeve contact/front panel connection
Large bushing with chuck type strain relief for PX-Series. Accommodates cables up to an OD of 8 mm (0.31 inch).
3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount
3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount
3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount
Black, digital AES/EBU 110 ohm switchboard cable with 1 x 2 x 0.22 mm2, an outer diameter of 3.8 mm and PVC jacket. Price / meter.
Phono plug, nickel plated shell and contacts
3 pole XLR male contact holder with gold-plated contacts without housing
2 pole 3.5 mm plug, metal handle with crimp strain relief, gold contacts
3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount
3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount
Switchboard cable, FRNC, 110 Ohm, AES/EBU, halogen-free, 1x 2x 0.22 mm2, foil screened, parallel stranded wire, outer diameter 3.8 mm. Price / meter.
2 x switching (normalling) stereo jack (T/TN/R/RN/S). Vertical PCB mount panel jack in A-gauge version with gold plated contacts and unique quick fixing cap for rapid panel mounting. Separation of mechanical latch and electrical contacts offers high retention force combined with low insertion force.
1/4 inches stereo jack, switched, with chrome ferrule and offset PCB pins, mounting nut included
3 pole female XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount
3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount
1/4 inches stereo jack, switched, with chrome ferrule and straight PCB pins, mounting nut included
2 pole open 1/4 inches jack, 2 contacts, with washer and nut, panel thickness 3.5 mm, with 0.205 inches faston tabs
3 pole vertical 1/4 inches jack with tip and ring normalling contacts, plastic housing, metal washer and nut
Blind Plate for D-size cutouts made of black plastic, same format like DBA-BL. Suitable for your own assemblings. The cutout can be formatted individually.
3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, Retention spring instead of latch
3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring instead of latch
3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, retention spring instead of latch
1/4 inches stereo jack, switched, with a full threaded nose and standard solder lugs, mounting nut included
3 pole 3.5 mm plug, metal handle, large cable outlet of 6 mm
3 pole 3.5 mm plug, metal housing with crimp strain relief
3 pole AC power inlet receptacle with D-Size mounting flange which can be mounted from the front and the rear
3 pole AC power outlet receptacle with D-Size mounting flange which can be mounted from the front and the rear
110 Ohm Draka AES/EBU stranded copper wires with blue PVC DMC-Flex jacket (RAL 5013). This audio cable is convenient for the professional transmission of analogue and digital audio signals. The cable diameter measures 5.0 mm ± 0.2 mm, the inner conductors 1 x 2 x 0.22mm2. Price / meter.
3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, lateral left PCB mount
3 pole female XLR receptacle, grounding: without ground / shell contact, vertical PCB mount
3 pole female XLR receptacle, mating connector shell to pin1 and front panel, vertical PCB mount, retention spring instead of latch
1/4" Jack Stereo AU
2 pole 3.5 mm plug, metal handle with crimp strain relief
Black, single-pair switchboard, 1 x 2 x 0.51 mm2 (AWG ~20), with tin-plated copper wire, foil screen as well as drain wire, PVC jacket and an outer diameter of 3.5 mm. Price / meter.
Large Bushing XX- Series
3 pole female XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, Retention spring instead of latch
7 pole DIN chassis connector, silver plated contacts
2 pole 3.5 mm plug, metal handle with crimp strain relief, large cable outlet
3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount
3 pole female XLR receptacle, grounding: without ground / shell contact, vertical PCB mount, Retention spring instead of latch
The dummyPLUG NDJ for Neutrik 1/4 inch Jacks enables you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.
1/4 inch mono jack, switched, with chrome ferrule and straight PCB pins, mounting nut included
6.35 mm stereo jack socket, not switchable, with fully threaded screw connection and standard solder connections, mounting nut included
2 pole 1/4 inches plug, plastic handle with flexible strain relief
3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount
Non-switching stereo jack (T/R/S). Vertical PCB mount panel jack in A-gauge/B-gauge version with gold plated contacts and unique quick fixing cap for rapid panel mounting. Separation of mechanical latch and electrical contacts offers high retention force combined with low insertion force.
Rubber sealing covers for the XLR D-Series female chassis connectors to protect the connectors against dust and moisture.
Chass.Con.Male 3P. H Panelisol.
5 pole DIN chassis connector, silver plated contacts
3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount
3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount
Rubber sealing cover for the XLR D-Series male chassis connectors and for the speakON chassis connectors (NL2M* and NL4M*) to protect the connectors against dust and moisture.
1/4 inch mono jack, switched, with a full threaded nose and straight PCB pins, mounting nut included
1/4 inches stereo jack, switched, with a full threaded nose and straight PCB pins, mounting nut included
NC Insert Radial
3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring instead of latch
3 pole horizontal 1/4 inches jack, all contacts switched, chrome ferrule nut
White Bushing for NL4FC
Brown Bushing for NL4FC
Red Bushing for NL4FC
Yellow Bushing for NL4FC
Green Bushing for NL4FC
Violet Bushing for NL4FC
Non-switching mono jack (T/S). Vertical PCB mount panel jack in A-gauge version with gold plated contacts and unique quick fixing cap for rapid panel mounting. Separation of mechanical latch and electrical contacts offers high retention force combined with low insertion force.
3 pole female receptacle, grounding: without ground/shell contact, vertical PCB mount
3 pole DIN chassis connector, silver plated contacts
1/4 inches stereo jack, switched, with half threaded nose and straight PCB pins. Please note: Fixing nut and washers must be ordered separately.
3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, retention spring instead of latch
The dummyPLUG NDL8 for all 8 pole male speakON chassis connectors enables you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.
Grey Bushing X-Series
Dummy-plate to cover D-shape cutouts, Black
3 pole horizontal 1/4 inches jack, all contacts switched, plastic housing with nut and washer, solder tap version
The dummy PLUG NDP for Neutrik Phono sockets enables you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.
1/4 inches stereo jack, switched, full threaded nose, sleeve contact/frontpanel connection
Grey Bushing XX- Series
3 pole female XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, retention spring instead of latch
Brown Bushing XX- Series
Black Bushing XX-SERIES
White Bushing XX- Series
1/4 inches stereo jack, switched, half threaded nose
Violet Bushing XX- Series
Blue Bushing XX- Series
Green Bushing XX- Series
Yellow Bushing XX- Series
Red Bushing XX- Series
Orange Bushing XX- Series
BLACK BUSHING XX W/O RING
WHITE BUSHING XX W/O RING
GREY BUSHING XX W/O RING
VIOLET BUSHING XX W/O RING
GREEN BUSHING XX W/O RING
BLUE BUSHING XX W/O RING
YELLOW BUSHING XX W/O RING
ORANGE BUSHING XX W/O RING
RED BUSHING XX W/O RING
BROWN BUSHING XX W/O RING
White Bushing for PX-Series
Orange Bushing for PX-Series
Red Bushing for PX-Series
Brown Bushing for PX-Series
Yellow Bushing for PX-Series
Grey Bushing for PX-Series
Blue Bushing for PX-Series
Green Bushing for PX-Series
Violet Bushing for PX-Series
2 pole horizontal 1/4 inches jack, all contacts switched, chrome ferrule nut
1/4 inch mono jack, switched, fully threaded nose, sleeve contact/frontpanel connection
TINY XLR bushing and chuck for cable diameters 4.0 - 5.0 mm
Green Coding Ring Xx-Serie Neon
White Coding Ring XX Series Neon
Blue Coding Ring XX-Serie Neon
Yellow Coding Ring Xx-Serie Neon
Red Coding Ring Xx-Serie Neon
1/4 inch mono jack, switched, fully threaded nose
The dummyPLUG NDM for male XLR receptacles enables you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.
The dummyPLUG NDF for female XLR receptacles enable you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.
Metallized plastic connection module, outer thread M 17x1
Blue Bushing for NL4FC
The KIMEX 064-1010 Audio cable connects two devices equipped with a 3.5mm jack input (computer, mobile phone) for an audio connection.
3 pole horizontal 1/4 inches jack, all contacts switched, plastic housing with nut and washer
2 pole horizontal 1/4 inches jack, all contacts switched, plastic housing with nut and washer
Violet ring with flat label surface for PX-Series
Orange ring with flat label surface for PX-Series
Red ring with flat label surface for PX-Series
Brown ring with flat label surface for PX-Series
Grey ring with flat label surface for PX-Series
Blue ring with flat label surface for PX-Series
White ring with flat label surface for PX-Series
Green ring with flat label surface for PX-Series
Yellow ring with flat label surface for PX-Series
Yellow coding ring with labeling block for X-Series
Green coding ring with labeling block for X-Series
Brown coding ring with labeling block for X-Series
Grey coding ring with labeling block for X-Series
Orange coding ring with labeling block for X-Series
Red coding ring with labeling block for X-Series
Violet coding ring with labeling block for X-Series
Blue coding ring with labeling block for X-Series
White coding ring with labeling block for X-Series
White Bushing for NP3TT-1
Black coding ring for XX-Series
Blue Bushing for NP3TT-1
Green Bushing for NP3TT-1
Red Bushing for NP3TT-1
Blue Bushing for NP3TT-P
Green Bushing for NP3TT-P
Yellow Bushing for NP3TT-P
Red Bushing for NP3TT-P
Brown coding ring for XX-Series
Transparent coding ring which allows an individual customized labeling, branding, coding etc. Just place an individual coloured and or lettered paper or tape (eg. Brothers) inside the ring.
Green coding ring for XX-Series
Yellow coding ring for XX-Series
Orange coding ring for XX-Series
Red coding ring for XX-Series
Grey coding ring for XX-Series
Violet coding ring for XX-Series
Blue coding ring for XX-Series
White coding ring for XX-Series
BLACK CODING RING > X-SERIES
Replacement crimp contact for the NC3FXX-HA cable connector and the NC3FD-LX-HA receptacle
Faston receptacle for tabs with "positive lock", Tab Fit 4.75 x 0.51 mm (0.187 x 0.02 in), Equivalent to AMP
Replacement crimp contact for the NC3MXX-HA cable connector and the NC3MD-LX-HA receptacle
Orange Bushing for NP3TT-1
Orange Bushing for NP3TT-P
Violet Bushing for NP3TT-P
Gray Bushing for NP3TT-P
White Bushing for NP3TT-P
Black Bushing for NP3TT-1
Brown Bushing for NP3TT-1
Brown Bushing for NP3TT-P
Yellow Bushing for NP3TT-1
Violet Bushing for NP3TT-1
Gray Bushing for NP3TT-1
Cover plate for cable reel type KTGT450.OF with 24x cut-outs for D-series chassis connectors.