Au service des professionnels et passionnés
Filtres
Vocas Systems specializes in designing and developing camera accessories for all video and film camera operators.
Vocas Systems specializes in designing and developing camera accessories for all video and film camera operators.
Base plate for Sony PMW-F5 & F55.
1 pièce (s) en stock
Vocas Handgrip kit, including a 15mm rail bracket
1 pièce (s) en stock
Side flag kit assy MB-250/300/310/315/320/325, DVMB-WA MKII (3 pcs.)
1 pièce (s) en stock
Universal harddisc recorder bracket.
1 pièce (s) en stock
Side flag kit MB4XX. Consisting of two retractable side doors.
1 pièce (s) en stock
Vocas Side flag kit MB-350. (2 pcs.)
1 pièce (s) en stock
15 mm General lens support including 4 adapters
2 pièce (s) en stock
Shoulder support compact for 15 mm rails
7 pièce (s) en stock
19mm Adaptor for Swing Away MKII
1 pièce (s) en stock
Aluminum filter holder 4x5,65
1 pièce (s) en stock
Filter frame 121 mm wide 4x5,65 for MB-4XX, as spare. 1pc.Included in MB-450
1 pièce (s) en stock
Filter frame 150 mm wide 5x5 for MB-4XX.
2 pièce (s) en stock
Aluminum filter holder 4x5
1 pièce (s) en stock
Long Separate Noga Magic Arm facilitates versatile mounting of just about any camera accessories you can imagine.
2 pièce (s) en stock
19mm to 15mm Adapter.
3 pièce (s) en stock
Adapter Plate for 15mm rails.
1 pièce (s) en stock
This palm support for the MFC-3 and MFC-3F makes it possible to focus the lens and support the camera at the same time
1 pièce (s) en stock
Drive gear M0,5/60 for the follow focus MFC-1.
1 pièce (s) en stock
3 Pieces: Flexible gear ring, with 2 movable stops. For use with cilindrical lenses with a focus barrel diameter between 40mm and 110mm.
3 pièce (s) en stock
Base plate Low for high camera (Eos 1D model).
1 pièce (s) en stock
Drive gear for Canon XL/H1 standard lens for the follow focus MFC-1. (No gear ring required.)
2 pièce (s) en stock
This Level marker attaches to any 1/4" threaded hole. Allowing the user to check for a proper alignment with the camera and the horizon.
4 pièce (s) en stock
Spare scale Follow focus MFC-1
9 pièce (s) en stock
1 pc. Length 210mm
2 pièce (s) en stock
1 pc. Length 250mm
1 pièce (s) en stock
Rubber donut set for flexible adapter ring MB-4XX consisting of 5 different rings hole diameters are: 80mm 90mm 100mm 110mm 120mm
1 pièce (s) en stock
Camera screw 1/4" long
47 pièce (s) en stock
Camera screw 3/8" long
64 pièce (s) en stock
Vocas 3/8, inches Camera Screw can be used as a replacement screw for any Vocas rig component like a Vocas camera plate that requires such a screw.
73 pièce (s) en stock
Vocas 1/4" Camera Screw can be used as a replacement screw for any Vocas rig component like a Vocas camera plate that requires such a screw
51 pièce (s) en stock
For use with up to 5 filters (3 fully rotatable). Made to fit the new filter standard 5,65X5,65 or smaller.
Shoulder rig Pro for Blackmagic Cinema camera
Handheld kit Pro For DV style camera.
This kit includes a VCT-compatible 15mm LWS baseplate, a left-side wooden handgrip with an extension, a magnetic, rubber shoulder pad, a NATO rail viewfinder bracket, and a pair of 8.3" 15mm rods.
MB-455: 5 stage 2pcs 5.65"x5.65", 2 pcs. 4"x5,65"
MB-436 matte box kit for any camera with 15 mm rail
The 5-Axis Diopter Holder Kit from Vocas pairs the 15mm LWS rod-compatible diopter holder with a 19mm studio rod adapter. Use this versatile rig to create focal plane effects with a single 138mm round diopter.
Handheld kit Pro Underneath for DV style cameras.
Handheld kit Pro Type L Underneath.
This kit includes a VCT-compatible 15mm LWS baseplate, a left-side wooden handgrip with an extension, a magnetic rubber shoulder pad, a NATO rail viewfinder bracket, and a pair of 8.3" 15mm rods.
The 5-Axis Diopter Holder from Vocas is a single 138mm round filter holder compatible with 15mm LWS rod systems.
Deluxe MFC-2 Follow Focus kit for CINE style lenses, with a gear ratio of 1:1.75.
Deluxe MFC-2 Follow Focus kit for DSLR and ENG style lenses, with a gear ratio of 1:1.
This kit includes a VCT-compatible 15mm LWS baseplate, a left-side wooden handgrip with an extension, a magnetic rubber shoulder pad, a top cheese plate, a NATO rail viewfinder bracket, and a pair of 8.3" 15mm rods.
Packed with features that protect your camera and enhance creativity, the MB-436 matte box is designed as a 4"x5.65" matte box with all the unique Vocas features but at an economical price and is perfectly compatible with big lenses and the latest large sensor and 3D cameras
Basic MFC-2 Follow Focus kit for cine style lenses, with a gear ratio of 1:1,75.
Basic MFC-2 Follow Focus kit for DSLR and ENG style lenses, with a gear ratio of 1:1.
FCR-15 Basic kit consisting of the flexible camera rig FCR-15 (0350-3000) and the leather handgrip kit short (0390-0003).
The BP-19 MKII is a 19 mm, height adjustable balance plate with a unique quick release balancing system to find optimal balance and stability with all kind of different camera/lens combinations.
This kit includes a shoulder pad, a compact 15mm LWS baseplate, a pair of 9.2" rods, a left handgrip with an extension, and an extension and cable for your original Canon handgrip.
reate a directors viewfinder with your PL mount lens using this Director's Viewfinder Deluxe Kit from Vocas. The kit includes the L-mount to PL-mount lens adapter, a lens adapter support with a rosette, a right-hand wooden handgrip with a rosette mount, and a rosette extension arm.
The durable adapter is made from lightweight aluminum and comes pre-shimmed with an adjustable lens lock. It is compatible with full-frame PL-mount lenses and full-frame and Super 35 cameras.
The FX6 Flexible Rig with Adjustable Grip Kit from Vocas pairs the versatile FCR-15 Flexible Camera Rig with an adjustable handgrip extension, a handgrip extension cable, and a Sony to ARRI-standard rosette adapter.
The BP-19 MKII is a 19 mm, height adjustable balance plate with a unique quick release balancing system to find optimal balance and stability with all kind of different camera/lens combinations. This kit comes without dove tail plate.
BP-19 MKII
USBP-19/15D, 19mm & 15mm Universal Shoulder Base Plate with balance dove tail
MB-256 matte box kit for any camera with 15 mm LW support
The USBP-15 MKII Baseplate Kit with Shoulder Pad for C200/C500 Mark II from Vocas combines a height-adjustable baseplate, a dovetail adapter plate, a magnetic shoulder pad, and a pair of 8.3" 15mm rods.
The USBP-15 MKII Baseplate with Soft Shoulder Pad from Vocas combines a baseplate with height-adjustable front LWS rod bracket with a universal camera adapter plate, a magnetic shoulder pad, and a pair of 8.3" 15mm rods.
The USBP-15 MKII Baseplate with Shoulder Pad for Sony PXW-FS7/FS7 II/FX9 from Vocas combines a height-adjustable baseplate, a dovetail adapter plate, a magnetic shoulder pad, and a pair of 8.3" 15mm rods.
Kit DSLR compact for low model cameras (such as the Canon EOS 5D/7D). Consisting of: Rail support for DSLR (#0350-0300), Vocas Handgrip kit, including 19mm and 15mm combi bracket and two handgrips (#0390-0002).
Flexible camera rig, FCR-15
This new base plate features everything you need to convert your camera into a shoulder camera, and is compatible with the Arri Alexa Mini camera
This new base plate features everything you need to convert your camera into a shoulder camera, and is compatible with the Canon EOS C200 camera
The USBP-15 MKII Baseplate with Shoulder Pad for RED Cameras from Vocas combines a baseplate with an adjustable high LWS rod bracket, a universal camera adapter plate, a magnetic shoulder pad, and a pair of 8.3" 15mm rods
This shoulder-mount system combines a baseplate with an adjustable-height 15mm LWS rod bracket, a KOMODO adapter plate, a magnetic shoulder pad, and a pair of 8.3" 15mm rods.
Kit for Blackmagic Cinema camera compact with 2 leather handgrips.
BP-18 Flat Balance plate 19mm BP19-01
Create a directors viewfinder with your PL mount lens using this Director's Viewfinder Kit from Vocas.
This Top Handle kit combines our Top Plate for the Arri Alexa 35 with the Universal sliding Top Handle system.
Ready to use directors viewfinder kit for any camera with an E mount.
The durable adapter is made from lightweight aluminum and comes pre-shimmed with an adjustable lens lock. An LPL-mount lens cap is included to protect your camera when a lens isn't mounted.
The durable adapter is made from lightweight aluminum and comes pre-shimmed with an adjustable lens lock. An LPL-mount lens cap is included to protect your camera when a lens isn't mounted.
USBP-15D, 15mm Universal Shoulder Base Plate with balance dove tail
Wooden handgrip with double Lanc switch (right hand)
USBP-15 MKII
Canon R-mount to PL adapter MKII including 15 mm rail support.
Use PL-mount lenses on a Leica L-mount camera with this Leica L-Mount to PL-Mount Adapter from Vocas. The durable adapter is made from lightweight aluminum and comes pre-shimmed with an adjustable lens lock.
Base plate for new Sony PXW-FS7, flat base short plate, dovetail plate, two pairs of rails
The Vocas MB-256 has been specifically designed for use with Zeiss CP.2 lenses. Therefore this matte box is compatible with lenses that have a front side diameter of up to 114 mm
Base plate MKII for Sony PXW-FS7 / FS7 II, flat base short plate, dovetail plate, pair of rails
MB-250 mattebox kit for any camera with 15mm LW support. Inc. MB-250 mattebox (#0200-0250), Flexible adapter ring kit (#0320-0010), Height adjustable barsadapter
Canon R-Mount to LPL Adapter Kit Including Support for RED KOMODO (Requires Side Cage Kit)
Top handgrip kit for Aja Cion including cheese plate, top rails & viewfinder adapter
The Swing away bracket features a unique design that allows the user to move the mattebox forward and swing it away from the lens, by rotating one single knob.
Micro Four Third (MFT) to PL adapter including 15mm support.
USBP-15F, 15mm Universal Shoulder Base Plate with flat base
MB-216 matte box kit for any camera with 15 mm LW support
The kit includes an H-shaped top cheese plate, two 15mm rods, a 15mm rod clamp, a handgrip extender, and a rosette adapter.
The top handgrip Pro is completely closed which gives you more safety and security even when wearing gloves. The mounting foot of 82 mm can carry a weight of 40 kg
When the optional Sony eyepiece is used on the Sony FX6 LCD monitor, this bracket offers additional stability and an adjustable friction needed to support the extra weight of the eyepiece.
The aluminum adapter allows you to use a PL-mount lens on your RF-mount KOMODO camera, and the included adapter support secures the adapter onto separately available side plates.
Expand your Sony FX6 lens choices to include cine-style PL-mount lenses with the help of the E-Mount to PL Adapter Kit from Vocas.
Consists of a Canon R-mount to PL adapter MKII (0900-0060) and Vocas PL adapter support for RED KOMODO (0900-0030). This kit requires a Vocas side cage kit for RED KOMODO (0600-0100) to be mounted on a RED KOMODO.
Consists of a Canon R-mount to PL adapter (0900-0060) and Vocas PL adapter support for Canon EOS C70 (0900-0032).
Base plate for Aja Cion, with V-lock and flat base plate short, two pairs of rails
The 20mm LPL-Mount Close Focus Adapter from Vocas adds a macro function to an LPL-mount lens used with an LPL-mount camera. This aluminum adapter extends the flange focal distance by 20mm.
Vocas 0390-0115 Wooden handgrip (right hand) With switch
The durable adapter is made from lightweight aluminum and comes pre-shimmed with an adjustable lens lock. An LPL-mount lens cap is included to protect your camera when a lens isn't mounted.
The durable adapter is made from lightweight aluminum and comes pre-shimmed with an adjustable lens lock. An LPL-mount lens cap is included to protect your camera when a lens isn't mounted.
The lens adapter comes pre-shimmed and with an adjustable lens lock. Included with the adapter is an LPL-mount lens cap to protect your camera when a lens is not mounted.
Run and Gun Shoulder Kit for Sony PXW-FX9
The Vocas MB-255 (item #0200-0255) has been specifically designed for use with Zeiss CP.2 lenses. Therefore this mattebox is compatible with lenses that have a front side diameter of up to 114mm.
The unique feature of the new follow focus system MFC-3F is that the focus knob and drive gear consist of only one part, there is no transmission in the new MFC-3F
The kit consists of a top handle, a cheese plate, and a 15mm rod port adapter. The entire assembly is constructed from durable aluminum and mounts on top of the C500 Mark II camera.
Wide-angle mattebox Wide-Angle Mattebox with 2 stages of filtertrayholder (one fixed and one rotating) including 2 pcs. 4x4 filtertray (0310-0001), Eye-brows and a Top-flag (0330-0001).
Top handgrip kit for Sony PXW-FS7 including cheese plate MKII, top rails & viewfinder adapter
Canon R-mount to PL adapter, excluding 15 mm rail support.
The durable adapter is made from lightweight aluminum and comes pre-shimmed with an adjustable lens lock. A PL-mount lens cap is included to protect your camera when a lens isn't mounted.
MFC-2 Gear unit 1:1 ratio
MFC-2 Gear unit 1:1.75 ratio
Use PL-mount lenses on a Sony E-mount camera with this Sony E-Mount to PL-Mount Lens Adapter MK-II from Vocas. The durable adapter is made from lightweight aluminum and comes pre-shimmed with an adjustable lens lock.
MFC-2 Knob wood with stops
Dovetail base plate adapter for Panasonic Varicam
E-mount to PL adapter (Excl. 15mm support!)
C-cage for BMD Pocket 4K kit consisting of the C-cage for BMD Pocket 4K (0600-1000), the Top handgrip Mini (0600-1010) and the SSD holder (0600-1020). The Vocas C-cage kit is designed to give you maximum protection of the camera while at the same time adding minimal weight to your gear. The C-cage with an angled HDMI connector, a Top handgrip Mini and a...
Panasonic VariCam dovetail adapter plate for USBP MKII
Together with a dedicated Top Plate this Top Handle is adjustable in length direction for optimal balance adjustment. The Top Handle can also be used pointing in a forward direction.
The durable adapter is made from lightweight aluminum and weighs only 8.3 oz. A PL-mount lens cap is included to protect your camera when a lens isn't mounted.
The kit consists of the 15mm Pro Rail Support Type R, a Compact Shoulder Support for Rod Support Type R, and a V-lock adapter plate, providing comfort and ease of operation in a compact design.
Top Plate for Arri Alexa 35 (including 15 mm rail holder)
PL-mount adapter for cameras with MFT Mount e.g. Panasonic AG-AF101.
Leather handgrip kit, including a handgrip combi rail bracket (0390-0006) and two short leather handgrips (0390-0004). The handgrip combi rail bracket (0390-0006) can be mounted to any 15 mm LWS, 15 mm studio and 19 mm rail supports.
The kit includes a tilting battery adapter plate and a V-mount battery plate.
Protect and prep your RED KOMODO camera for accessories using this Full Cage Kit from Vocas. Constructed of aluminum, the kit consists of two top and bottom plates and two side plates.
The Vocas dedicated Canon EOS C200 cage system gives the camera extra steadiness and stability especially when using heavy set-ups
Handgrip kit, including 19mm and 15mm combi bracket (#0390-0006) and two handgrips (#0390-0005)
The kit includes the LCD support bracket and the Sony 8T to 15mm viewfinder extension bracket.
Wooden handgrip (left hand).
Right handed ergonomically shaped wooden handgrip.Equipped with Arri style rosette.
The Vocas MB-216 features a Quick-Lock mounting system that attaches directly to the front lens barrel of 114 mm lenses
This is a separate focus knob for the MFC-2 / 6 follow focus
Including double 15 mm rail holder at the front for alternative viewfinder attachment or lens motors. Allows the original Sony handgrip and viewfinder bracket to be used.
MFC-2 Knob wood
MBS-100 Type I, Mattebox support 15 mm. For Panasonic AGHPX300
This viewfinder bracket is designed for the Canon EOS C200 viewfinder kit
MB-600 Double rotatable filter stage
The top handgrip Pro is completely closed which gives you more safety and security even when wearing gloves. The mounting foot of 82 mm can carry a weight of 40 kg
With integrated level marker and many industry standard 3/8" and 1/4" threaded holes.
The bracket connects between the camera's original, detachable LCD monitor and your camera to provide additional stability.
Viewfinder bracket universal
Rail support for Blackmagic Pocket Cinema Camera
Shoulder support for 15mm rails
This viewfinder bracket is designed for the Arri viewfinders
Spare dovetail plate 295 mm V2
Camera adapter plate that attaches directly under the Arri Alexa 35 allowing our widely available USBP sliding system to be used with this camera.
This 15mm Pro Rail Support Type R from Vocas can accommodate medium to large-sized cameras thanks to its durable aluminum camera plate and 15mm rods.
The kit includes the Top Handgrip Mini and a top cheese-style plate for the C70. The plate mounts on top of the C70 using a 1/4"-20 screw, and it features a shoe mount, 15mm rod ports, and 1/4"-20 and 3/8"-16 accessory threads.
Equiped for optional double 15 mm rail holder (0350-2010) at the front for alternative viewfinder attachment or lens motors. Allows the original Sony handgrip and viewfinder bracket to be used.
19 mm lens support for all lenses. Incl. 4 adapters
The durable aluminum support bracket mounts onto the side of the camera LCD with a clamping design, using the display's side rod port to secure it.
MB-600 Single rotatable filter stage
MBS-100 inchType G4 inch 15 mm rail support, with integrated shoulder bracket.
MBS-100, 15 mm lightweight support for larger cameras. Required for DSR-250/300/500 and JVC GYDV550/700 and JVC GY-HD2XX.These supports comes with 2 pair of 15 mm rails.
MBS-100 type N mattebox support
The Pro rail support 15 mm type P is a compact support which provides compact and medium cameras with front and even rear bars at the same time
The Pro Rod Support 15mm Type Q from Vocas provides 15mm LWS support for select DSLR and mirrorless cameras. This versatile baseplate system is height adjustable and includes a pair of 9.2" 15mm rods.
RED epic 15mm LW support / BP-18 adapterBP-18 adapter
This kit includes an adjustable handgrip extender and a body rosette adapter for the FX6, and they are designed to position your original FX6 handgrip at a more comfortable distance for handheld operation.
The plate is designed to mount onto standard 15mm LWS rods with the rod block, and it powers a camera or accessory with a 4-pin XLR power port.
Leather handgrip kit for Sony Alpha A7 with 1 handgrip
The Vocas 15mm LW Swing Away Bracket attaches directly to the rear of the MB-430 Matte Box and allows the user to mount the matte box onto 15mm lightweight rods.
Separate top handgrip including top 15mm rails (Fits directly on Blackmagic Cinema Camera)
Separate tophandle grip low
Dovetail shoulder support
Viewfinder bracket with rosette
MFC-2 Knob standard
Aluminum tilting filter 4" x 5.65" horizontal unit for MB-450 (fits in the MB-450 hood)
This adapter clamps onto a bar or tube like a pan handle or tripod leg ranging from 0.6 to 1.2" in diameter.
Left cage side for the Canon EOS C200 cage kit (0600-0050). The left cage side provides a standard rosette for mounting a handgrip (0390-0104) and also provides additional mounting points for ¼ and 3/8accessories
The kit includes a mini compact top handle, two "dogbone"-style 15mm brackets, and a 15mm rod that measures 6.7" in length.
. This Top Handle provides 1/4"-20 and 3/8"-16 accessory threads, two cold shoes, and a single 15mm rod clamp for attaching a separate viewfinder adapter.
Use the Adjustable Handgrip Extender for Sony FX6 from Vocas to position your original FX6 handgrip at a more comfortable distance for handheld operating
Use the four 1/4" bolts that come in the package to attach your Canon RF mount to your optional LPL or PL adapters.
This viewfinder bracket is designed for the Canon EOS C200 viewfinder
The kit consists of a top bracket and top handle that mount using included screws onto the top of the separately available side plate kit.
This viewfinder bracket kit is designed for use with any viewfinder with a 1/4" thread on the bottom side
Support a heavy lens while using an LPL lens adapter using this 15mm Rod Clamp for LPL Adapters from Vocas. The aluminum rod clamp fits around your Vocas LPL lens adapter and the standard 15mm rod clamp attaches to separately available top-mounted rods.
MFC-6 19 mm adapter
Remote switch for 19mm or 20mm tubes (excl. cable!)
This extender places the focus knob further from the lens. This can help solve problems when another accessory is in the way of the follow focus knob
H-cheese plate for top bars Sony PXW-FS7 / FS7 II
The Vocas Side Flag Kit for MB-350 offers protection from undesired lens flare effects, especially in bright artificial lighting and sun and is ideally suited for the MB-350 mattebox.
Our USBP sliding systems allows quick balancing of the camera while at the same time allowing a rapid changes between gimbel-, 15 mm- and 19mm setups.
C-cage for the Blackmagic Design Pocket 4K /6K camera, consisting of a bottom, side and top part. An angled HDMI connector and an HDMI protector is included.
The bracket connects between the monitor and your camera after removing the detachable LCD monitor, and the bracket angle can be adjusted using the two locking levers.
This separate top handgrip provides the camera with a comfortable lower top handgrip
This separate top handgrip provides the camera with a comfortable top handgrip
Shoulder support to BP-19 adapter. By attaching this adapter, the Vocas shoulder support (0370-0001) can be attached to any standard dovetail plate.
The Dual 138mm Adapter Ring from Vocas is compatible with the modular Vocas 5-Axis Diopter Holder. Made from industrial plastic, this ring screws into the holder to retain two Dual 138mm diopter (close-up) filters.
The plate provides an option for mounting a separately available battery plate such as a Gold mount or V-mount onto your camera rig's 15mm LWS rod system.
Arri Amira flat base plate
Bracket that can be attached to a NATO rail, allowing a 15 mm tube to be used. Including a 60 mm long 15 mm tube.
Director's monitor cage sunshade
Sony VENICE dovetail adapter plate for USBP MKII
Accessory Holder with Sony Accessory Mount
This viewfinder bracket is designed for the Sony PXW-FS7 / FS7 II and is meant to replace the original viewfinder bracket of this camera
Separate cheese plate for top bars Canon EOS C200
Adjustable handgrip extender equiped with standard rosettes
Add a support to your PL adapter and add an optional handgrip to create a directors viewfinder with this Director's Viewfinder Bracket from Vocas. T
Universal clamper for ZiF-50/100 and Z-10 lens controllers
MFC-2S 15 mm bracket
The 138mm Adapter Ring from Vocas is compatible with the modular Vocas 5-Axis Diopter Holder. Made from industrial plastic, this ring screws into the holder to retain one 138mm diopter (close-up) filter.
H-cheese plate for Panasonic AU-EVA1
This viewfinder bracket kit is designed for viewfinders that are equiped with a rosette with 1/4" threaded hole
Monitor support for 15mm bars. A monitor support that attaches directly to standard 15mm rails and allows the use of any monitor can be mounted on a 1/4 screw.
This viewfinder bracket is designed for the Arri viewfinders
The aluminum rod clamp fits around your Vocas LPL lens adapter and the standard 15mm rod clamp attaches to separately available bottom-mounted rods. The clamp is height adjustable to fit a variety of camera setups.
The 4.5" Adapter Ring from Vocas is compatible with the modular Vocas 5-Axis Diopter Holder. Made from industrial plastic, this ring screws into the holder to retain one 4.5" diopter (close-up) filter.
Sony HDC-4800 to BP-18 adapter plate
Add accessories such as a top handle, extension arms, a monitor, or an EVF mount to your Canon C70 camera with this Top Cheese Plate from Vocas.
Vocas Monitor Support Short for 15mm Bars attaches directly to standard 15mm rails and allows the use of any monitor that can be mounted on a 1/4 inches screw.
Quick release dovetail plate
The cheese plate mounts on top of your C500 Mark II and facilitates the mounting of a top handle or relocating the original C500 handgrip.
This V-mount battery plate features a 10A fuse and mounts onto a separately available mounting plate. It can be used to power a camera, light, or accessory using its 13.8" long 4-pin XLR connector.
15 mm Lens mount adapter support
Viewfinder bracket for Sony PXW-FS7
143mm Flexible Donut ring. Max lens diameter 132mm
Canon EOS C100/200/300/500 extender cable
Remote cable for the Vocas wooden handgrip (right) with switch
MFC-2S Palm support wood
15mm offset High bracket for shoulder support.
The Vocas Flexible Adaptor Ring Kit (144 mm), which includes an adaptor ring and holder for an additional 138 mm round filter, is compatible with the MB-450 mattebox. It also includes exchangeable flexible soft rubber rings (donuts).
This H-cheeseplate is specifically designed for the Sony PXW-FS7 / FS7 II / FX9 and can be used in combination with the original handgrip of the Sony PXW-FS7 / FS7 mk II / FX9 cameras.
The left-hand Wooden Handgrip from Vocas provides a comfortable, contoured grip for your camera rig. This aluminum and wood grip mounts on any standard ARRI-style rosette.
Ergonomic designed wooden handgrip with a comfortable grip. Compatible with standard rosette
Handgrip rosette adapter for Panasonic AU-EVA1
The Vocas 15mm Bar Adapter acts as a link between a camera matte box and a rail support. This adapter can be used to mount Vocas MB-4xx series matte box on a rail support.
Handgrip bayonet rosette adapter for Panasonic AU-EVA1
Flexible cable for MFC-1, 500mm. long.
15 mm Clamping block high for USBP-15 MKII
15 mm Lens support including lens strap
This 1 kg stainless steel counter weight can be mounted directly on to any standard 15 mm rails
The cheese-style top handle attaches to a camera cage or rig using two 1/4"-20 screws that mount up to 1.24" apart in a sliding slot.
Add accessories to the right and left sides of your RED KOMODO cinema camera with this Left- & Right-Side Cage Bracket Kit from Vocas. The durable aluminum plates weigh only 1.4 oz each and mount on the right and left sides of the camera.
This cheese plate is specifically designed for the Sony FX6 and can be used in combination with or without the original handgrip of the Sony FX6.
Vocas 15mm Support is designed to be used with PL adapters like the Micro Four Third to PL adapter and the Sony E-mount to PL adapter.
Short balance dovetail plate MKII
4th filterholder for MB-450
The Vocas 4th Tilted 4x5.65 Filter Holder for MB-455 installs into the hood of the Vocas MB-455 Matte Box and provides additional flair reduction.
Separate cheese plate Aja Cion
Add mounting for a 15mm rod to your NATO rail accessory with this NATO Rail to 15mm Viewfinder Bracket from Vocas. It features spring-loaded locking levers, so you can tighten or loosen the clamp without having to rotate the lever fully.
Use the Dovetail Adapter Plate for RED KOMODO & BMPCC 4K/6K from Vocas to slide your KOMODO or Blackmagic Pocket Cinema Camera 4K or 6K camera onto a Vocas USBP-15 Mk II or Quick Release Dovetail Plate.
Remote cable for Lanc 2,5 mm
Remote cable for Arri Alexa Required when using the Vocas handgrip with switch (#0390-0115) on a Arri Alexa camera.
Remote cable for Sony F3 / F5 / F55 Required when using the Vocas handgrip with switch (#0390-0115) on a Sony PMW-F3 / F5 / F55 camera.
Remote cable for Canon EOS C100 / C300 / C500 Required when using the Vocas handgrip with switch (#0390-0115) on a Canon EOS C100 / C300 / C500 camera.
Sony PXW-FS7 / FS7 II dovetail adapter plate for USBP MKII
Canon EOS C200 dovetail adapter plate for USBP MKII
Arri Alexa Mini dovetail adapter plate for USBP MKII
This 15mm LWS rod system can be used to mount a battery plate, counterweight, or other camera accessory.
Separate handgrip (left hand)
Support your lens adapter when using a long or heavy lens on your RED KOMODO camera to protect your camera with the RF-to-LPL Lens Adapter Support from V
Separate cheese plate Arri Alexi Mini
Flag Kit for MB-480 from Vocas includes the left and right side flags and the medium wide top flag.
The Vocas 15mm Studio Adapter is used to mount one MK II Swing Away Bracket onto 15mm support rails.
Height adjustable Barsadapter for MB455
MB-600 Filter frame 6,6" x 6,6"
MB-600 Filter frame 5,65" x 5,65" / 4"x 5,65"
MB-600 Filter frame 4" x 5,65" / 4" x 4"
Soft shoulder pad for the USBP-15 MKII. The standard shoulder pad has an integrated magnetic system, which allows you to easily connect the pad underneath the USBP-15 MK II, without using any tools.
The durable support mounts onto the front of the camera at four points around the adapter. The support secures around the RF-to-PL lens adapter using the included spring-loaded locking thumbscrew.
Separate Remote switch assy (no cable!)
Separate cheese plate for Canon C300 MKII
15 mm Lens support for Sony 28 -135
Separate Noga magic arm (10,5" long)
The Flexible Adapter Ring for MB-430 from Vocas features a soft fabric cuff, which can be stretched around any lens with a diameter of 134mm or less.
The adapter allows you to relocate your handgrip elsewhere or add a rosette accessory with an M6 thread.
Handgrip combi rail bracket, for use on both 19mm and 15mm rails, for single or double sided use.
Double sided NATO rail with rosette (170 mm)
Central bracket for Sony Alpha 7
This microphone holder is made for medium to lightweight microphones with a diameter of 19 - 25 mm.
This support requires the separately available Vocas side plates for the RED KOMODO to mount it using four captive screws.
Secure your Canon EF-EOS R 0.71X lens adapter onto your RED KOMODO camera rig using this Support for Canon EF-EOS R 0.71X Lens Adapter from Vocas.
Filter frame 121 mm wide for 4x5,65 filters, this frame fits in the fixed horizontal filter slot in the MB-450 Item #0410-0001.
Camera adapter plate
Separate cheese plate Sony PXW-FS7 MKII
Filter frame 150mm 5.65x5.65 and 4x5.65 vertical 2 for MB-430.
Filter frame 150 mm 4 inchesx4 inches / 4 inchesx5.65 inches combo for MB-430.
Handgrip, with soft comfortable leather handle. Can be used on both sides of the rail bracket.
Filter frame 150 mm wide 4x4 for MB-4XX.
Filter frame 150 mm wide combo 5,65x5,65 / 4x5,65 Vertical. 1pc.Included in MB-450.
Filter frame 150 mm wide combo 4x4 / 4x5,65 horizontal. 1pc. Included in MB-450.
Aluminum filter holder 4x6
Aluminum filter holder 4,5x4,5
Separate cheese plate
Aluminium filter holder 4X5,65 fixed. Filter frame for the horizontal filterslot of the MB-350.
This lightweight Compact Mini Top Handle with 15mm Rod Mount from Vocas quickly mounts onto your camera, cage, or rig with a 15mm top or side rod using its single 15mm rod clamp.
The support requires the Vocas top cheese plate for the FX6 to mount it using the two captive 1/4"-20 screws.
Leather handgrip short with soft comfortable grip (left hand)
Side plate for Sony VENICE 2. With many industry standard 3/8" and 1/4" threaded holes. Attaches to the side of the camera and allows the mounting of accessoires to the side of the camera.
Add this Top or Bottom Bracket from Vocas to the top or bottom of your RED KOMODO camera to mount optional tripod plates, top handles, extension arms, or 15mm rod mounts.
This PL support can be mounted on the H-cheese plate for the Sony PXW-FS7 0350-1365 & 0350-1367 and supports the E-mount to PL adapter 0900-0016
Vocas Separate 15 mm balance plate
Single sided NATO rail with rosette (200 mm)
Double sided NATO rail with single 15 mm (170 mm)
Right cage side for the Canon EOS C200 cage kit (0600-0050). The right cage side provides additional mounting points for ¼ accessories
This bracket can be mounted on any Arri style 3/8 hole, offering a connection to a 19 mm rail.
Can be used on the front, top, side or rear of our Sliding Top Handle. Attaches directly to any 3/8" industry standard hole.
Can be used on the front, top, side or rear of our Sliding Top Handle. Attaches directly to any 3/8" industry standard hole.
Can be used on the front, top, side or rear of our sliding Top Handle. Attaches directly to any 3/8" industry standard hole.
Rear VCT-14 clamping block
Sony 8T to 15 mm viewfinder bracket
Long Separate Noga Magic Arm facilitates versatile mounting of just about any camera accessories you can imagine.
Single sided NATO rail with rosette (170 mm)
Single sided NATO rail with double 15 mm (60 mm)
Single sided NATO rail with single 15 mm (200 mm)
Top flag for MB-450. Item #0430-0002. This item is included in the MB-450 mattebox set (Item #0400-0451.)
Separate Pro support Base plate
Vocas Separate Pro Support Type L Base Plate.
Base plate High for low camera (EOS 5 model).
The 6-piece Shim Set for Sony E to LPL Adapter from Vocas enables you to precisely adjust the flange focal distance of your lens mount to obtain accurate back focus.
Vocas 0390-0004 Vocas Handgrip short, with soft comfortable leather handle. Can be used on both sides of the rail bracket.
19mm adapter for MB-430 swing away bracket.
15mm studio adapter for MB-430 Swing away bracket.
Shoulder pad standard for base plate Sony PXW-FS7 MKII
French flag for MB-210, including hinge. In some extreme situations this flag is necessary to prevent lens flare. This flag can be mounted on the top or bottom of the MB-210.
Hinged top flag MB-3XX (48cm wide) MKII
2,5 mm LANC extender coil cable
This NATO rail fits on the 8 teeth connector of the original Sony PXW-FS5 or Panasonic EU-EVA1 top handgrip
This PL support can be mounted on the H-Cheese plate for the Sony PXW-FS5 0350-1375 and supports the E-mount to PL adapter 0900-0016
Offset Handgrip Extender Long (150mm).
Single sided NATO rail with single 15 mm (170 mm)
Single sided NATO rail with rosette (140 mm)
Single sided 15 mm NATO rail long; length: 170 mm
Seperate Blackmagic Cinema camera baseplate
Single sided NATO rail with single 15 mm (100 mm)
Separate 15 mm viewfinder adapter for Canon EOS C200 top handgrip
15mm clamping block
The Wooden Handgrip for RED V-RAPTOR and KOMODO Side Brackets from Vocas is a handgrip designed specifically for the RED V-RAPTOR and KOMODO cameras
This is a set of two Vocas Cage Rosette adapters for the Vocas USBP-19, USBP-15D, and BP-18 baseplates. These baseplates feature designated places for them.
15 mm universal lens support.
Vocas Systems 15mm LW Rods Adapter attaches directly to the MB-430 Matte Box and allows the matte box to be supported by any standard 15mm light-weight-spaced rods.
Single sided NATO rail with single 15 mm (140 mm)
Shoulder pad standard
Vocas Separate Pro Support Type K Base Plate.
Pro Support Base Plate for 15mm Pro Rail Supports
This viewfinder bracket is designed for the Sony PXW-FS7 / FS7 II and is meant to replace the original viewfinder bracket of this camera
This bracket fits on the side of the RED KOMODO, either at the left or right side. With Arri style rosette, two 1/4" and two 3/8" threaded holes.
Using the included screws, this accessory attaches to a 3/8"-16 ARRI-style, anti-twist accessory mount, ensuring a solid, twist-free connection.
Straight handgrip 15mm rail bracket
Equiped with RED style rosette on once side and a double sided ARRI rosette on the other side.
114mm Flexible Donut ring. Max lens diameter 107mm.
Cable protector / Side Cheese plate for Sony PMW-F5/F55
1pc. Carbon 19mm Bar, Length: 8600
Support bridge for cheese plate Sony PMW-F5/55 using AXS-R7 recorder
114 mm to M72 Threaded step down ring
114 mm to M77 Threaded step down ring
114 mm to M82 Threaded step down ring
114 mm to M95 Threaded step down ring
For extra attachment points this plate can be attached to our cheese plate for Sony FX6 (0350-1376). With two cold shoes and several Arri style 1/4" threaded holes.
Base plate adapter for JVC
Base plate adapter for Sony PMW-F3. Allows the use of the Vocas Base plate for Sony F5/55 (#0350-1000) on the Sony PMW-F3 camera.
Base plate adapter for Panasonic Varicam for F55 shoulder base plate
Double sided Handgrip Extender Medium (110mm).
Shim ring set for MFT to PL adapter.
15 mm single rod holder
Viewfinder extender
Separate 15 mm viewfinder adapter for top handgrip
This smaller rubber pad mounts on the Type R rod support using the included screws. It provides a softer, cushioned rest on your shoulder so you can support your camera rig more comfortably during long shoots.
Body rosette adapter for Sony PXW-FS7 / FS7 II
This 138mm to 136mm Adapter Ring for MB-430 from Vocas has an inside diameter of 136mm and an outside diameter of 138mm. The ring fits into the rear clamp of the MB-430 matte box, allowing users to mount the matte box onto lenses with an outside diameter of 136mm.
This 138mm to 114mm Adapter Ring for MB-430 from Vocas has an inside diameter of 114mm and an outside diameter of 138mm. The ring fits into the rear clamp of the MB-430 matte box, allowing users to mount the matte box onto lenses with an outside diameter of 114mm.
Director's monitor cage accessory bracket
Compact holder for small devices such as SSDs, video converters etc etc. Iincluding rubber straps to mount to a 1/4" thread hole.
Starknob for the Vocas follow focus. The Vocas starknob is also compatible with different third party follow focus brands.
Stainless steel rosette spacer 13 mm
NATO clamp horizontal rosette
NATO clamp cold shoe
NATO clamp 1/4" and 3/8"
Grow your rig with a variety of accessories using the Dogbone-Style Bracket with 3/8"-16 ARRI-Style Mount & 15mm Rod Clamp from Vocas.
105mm to M37 Adapter Ring
1pc. Carbon 19mm Bar, Length: 500mm
15mm Bracket for Monitor support. (only the bracket NO! magic arm!)
Step-down Adaptor Ring (105mm - M72)
Double sided Handgrip Extender Short (66mm). Equipped with Arri style rosettes.
143mm Flexible Cuff ring. Max lens diameter 137mm
V-lock base plate
Can be mounted onto any 1/4" industry standard hole.
Cold shoe to 15 mm adapter
The lightweight aluminum holder features a 15mm rod port that secures with a locking lever.
Blackmagic Studio camera adapter plate
114 to 87mm step down ring
114 to 98mm step down ring
Vocas 105 mm to 95 mm Step down ring for MB-3XX for Fujinon wide angle lenses
Vocas 105 mm to 95 mm Step down ring for MB-3XX for Canon wide angle lenses
114 to 95mm WA step down ring for MB-430
105 mm to 86 mm Step down ring for MB-3XX
Vocas 105 mm to 85 mm Step down ring for MB-3XX
114 mm to 88 mm Step down ring for MB-215 / MB-255 / MB-216 and MB-256
Step Down Adaptor Ring (105-100mm)
Step-down Adaptor Ring (105-90mm)
Step-down Adaptor Ring (105-80mm)
82 mm Foot for the top handgrip Pro
114 to 85mm step down ring
114 to 104mm step down ring
114 to 95mm step down ring
114 mm to 100 mm Step down ring for MB-215 / MB-255 / MB-216 and MB-256
114 to 98.5mm step down ring
114mm to 110mm Adapter Ring for MB-255 from Vocas features an inside diameter of 110mm and an outside diameter of 114mm.
This 114mm to 105mm Adapter Ring for MB-255 from Vocas.
The Vocas 0320-0003 Adaptor Ring is a 105 to 95 mm step-down adaptor ring used to attach the broadcast MB-3XX series mattebox, when the mattebox is used as a clip-on (directly attached to the lens front).
NATO rail (100 mm)
143 to 138 mm to fit 138 mm stepdown series
143 to 114 mm used to fit 114 lenses or the 114 mm stepdown series
1/4" quick release for Noga arm
Carbon filter holder 3x3
NATO rail (80 mm)
1pc. Carbon 19mm Bar, Length: 400mm
105mm to M72 Threaded XL Step-Down Ring
Vocas Backfocus / white card 420 x 594 mm A2. Printed on 3 mm thick foam board.
This adapter enables you to relocate the original Sony FX6 handgrip when using an extension arm or to add a rosette-based accessory to the FX6's rosette mount.
Mic holder 15mm
NATO rail (60 mm)
Separate right hand rosette for Sony Alpha 7 bracket
Wedge plate ENG, incl. 1/4 and 3/8 screw. 1 pc.
Drive gear M0,8/36 for the follow focus MFC-1.
MFC-2 Drive gear M0,8/36 T x 18 mm wide
MFC-2 Drive gear M0,8/54 T
MFC-2 Drive gear M0,8/46 T
MFC-2 Drive gear M0,8/40 T
MFC-2 Drive gear M0,5/60 T
MFC-2 Drive gear M0,8/36 T
MFC-2 Drive gear M0,6/48 T
Drive gear M0,8/40 for the Vocas follow focus MFC-1.
Vocas Drive Gear M0.5/75 for the Vocas follow focus MFC-1.
Gear extender for the follow focus MFC-1. This attachment moves the drive gear further away from the follow focus gear box
Drive gear M0,6/48 for the follow focus MFC-1.
105mm to M77 step-down adapter ring, for inside M77 threaded lens fronts. Suitable for Clip-on Wide Angle Mattebox 0200-0250 to Sony PMW-EX1.
Carbon fibre filter holder 4x4
Separate Dovetail plate for F55 shoulder base plate
Separate Flat plate for F55 shoulder base plate
Separate Flat base plate Short for F55 shoulder base plate
Flat base plate for USBP-15F
Flat base plate for USBP-15
1pc. Carbon 15mm Bar, Length: 8500
1pc. Carbon 19mm Bar, Length: 300mm
This is a separate scale for the MFC-2 / 6 follow focus studio knob
Wedge plate DV, incl. 1/4 screw. 1pc.
Made of durable aluminum, this Arca-Swiss type plate sports non-slip cork pads on top and includes both 1/4"-20 and 3/8"-16 screws for mounting on your camera.
Weight attachment plate for Sony NEX-EA50.
1pc. Carbon 15mm Bar, Length: 350mm
15 mm Rubber chest brace
1pc. Carbon 19mm Bar, Length: 200mm
This part fits onto the top of the separately available Noga AD4200 or AD4300 quick release that sits on the end of any Noga magic arm, providing a quick release mount.
French flag. Top flag for MB-450. Item #0430-0001.
Can be mounted onto any 1/4" industry standard hole.
15mm Bar, 1 pc. Length 250mm
Top flag MB-4XX medium
Vocas Top flag (compact) for MB-430 / 450 Matte Box. 38cm wide.
Top flag wide (42cm wide) for MB-3xx
Weight attachement plate for shoulder support.
Top flag standard (31cm wide). MKII
15mm Bar set lenngth 500mm.
Aluminum Rod (60cm).
Spare Mask for the MB4XX, 16:9.
MFC-2 Spare scale
Light mount 1/4" adapter for cold shoe accessories. This light mount attaches to any 1/4'' thread hole and offers a attachment for any cold shoe accessory, like audio receivers or camera lights.
Stap Pins set (2 pc.) 2 Strap Pins with 1/4 inches thread. Allows the user to attach a Carrying strap to the camera.
1 pc. Length 400mm
1pc. 15mm Bar, Length: 450mm
Separate rubber donut set for flexible donut adapter ring MB 435 / MB-436 & MB-455
The LPL Mount Cap from Vocas can be used to cover the Vocas Sony E to LPL adapter. When attached, this replacement ARRI LPL-mount cap protects your camera's sensor from dust and dirt.
Seperate PL mount cap.
Flexible gear ring, with 2 movable stops. For use with cilindrical lenses with a focus barrel diameter between 40mm and 110mm.
Separate rubber donut set for flexible donut adapter ring 114 mm
15mm Bar, 1 pc. Length 750mm
This is a perfect flat head screwdriver for 1/4"-20 and 3/8"-16 camera screws.
1 pc. Length 35mm
1 pc. Length 60mm
1 pc. Length 105mm
1 pc. Length 143mm
1 pc. Length 183mm
1 pc. Length 350mm
1 pc. Length 235mm
1 pc. Length 170mm
1 pc. Length 300mm
1 pc. Length 160mm
MFC-2 wooden center cap
Backfocus / whitecard 210 x 148,5 mm A5
This 19mm rod replaces the short rod that comes with the FCR-15 top handle. It extends the handle out to avoid blocking the fold-out LCD screen on your camera.
Backfocus / whitecard 297 x 210 mm A4
This Vocas Flat Head Screwdriver with a 0.16 x 0.03 head features a comfortable handgrip and a hardened tip to reduce wear. This item is included with the Vocas Flexible Gear Ring (0500-0295).
Steel hex key, size 1,27 mm.
Steel hex key, size 1,50 mm.
Steel hex key, size 2,00 mm.
Steel hex key, size 2,50 mm.
Steel hex key, size 3,00 mm.
Steel hex key, size 4,00 mm.
Steel hex key, size 5,00 mm.
Steel hex key, size 3/16".