Au service des professionnels et passionnés
Filtres
incl. intercom & tally
All purpose 26mm dovetail insert. Can beattached to 3/8 thread mounting points having standard Arri diameter 15,5mm counterbore. For use with 26 mm dovetail shoes.
to flip focus direction of FF when using Nikon lensesfor FF-5 and FF-4 (with FF-4 only with 2x - K2.47002.0)
A carbon fiber flag, with two extensions,which can be mounted at the top or the bottom of the LMB 4x5 - compatible with LMB-5, LMB-15, and LMB-25
FlexDoor SkyPanel S30
Speed ring circular (9225) (255 mm) fits Quartz/Daylite Lightbanks
Designed by Mike Johnson in the US, the Top Point Kit adds stability to all stabilizer rigs requiring good resistance to vibrations and flex. The kit is not limited to ARRI CSS but fits particularly well the remote head SRH-360.
AMIRA camera case (Peli 1510 carry on case - cabin size - foam fitted for AMIRA & MVF - Arri AMIRA branded)
Diffusion Kit S30 (Lite & Heavy Diffusion, Intensifier & Panel Carrying Bag)
The Stabilizer Adapter Mount SAM-6 450 mm/18 in. is a long, low-profile sliding dove tail plate that connects the ALEXA 35 to ARRI CSS products such as SRH-3/360 and supports long camera builds.
SMPTE 311 Lemo connector for DTS 1820-12G FCA Fibre Camera Adaptor 12G, K2.0013648
The medium 40° SnapGrid° by DoPchoice attaches directly to the front of medium DoPchoice SnapBags, incl. the SnapBag M for Orbiter. The SnapGrid provides directional light control and easily folds away for storage.
Smart Focus Ring Left Hander Set Meter (10x)
Smart Focus Ring Set Meter (10x)
Smart Focus Ring Set Feet (10x)
Smart Focus Ring Left Hander Set Feet (10x)
This adapter plate is designed specifically for Sony F5 and F55 cameras - making them compatible with lightweight support standards - including a built-in Sachtler Touch and Go plate. With this - the camera can be mountedto a head or anything else with a standard quick release plate - allowing it to be quickly and safely secured - for example in between...
Smart Focus Ring Reverse Set Feet (10x)
Set of 10 metric reverse smart focus rings. Right-hander rings with reversed scale. Plug-and-play with the Hi-5 hand unit.
Still Lens Clamp-On Set Pro for still photo lenses threads. Includes: K2.66140.0 1x Still Lens Clamp-On Ring 52; K2.66143.0 1x Still Lens Clamp-On Ring 58; K2.66138.0 1x Still Lens Clamp-On Ring 62; K2.66126.0 1x Still Lens Clamp-On Ring 67; K2.66137.0 1x Still Lens Clamp-On Ring 72; K2.66136.0 1x Still Lens Clamp-On Ring 77; K2.66139.0 1x Still Lens...
Attaches to the back of the AMIRA camera and accepts V-lock on-board batteries. Batteries can be hot-swapped.
Attaches to the back of the AMIRA camera and accepts Gold mount on-board batteries. Batteries can be hot-swapped.
DoPchoice SnapGrid 40x60° for SkyPanel S120
The SnapBag for the S60 by DoP Choice attaches directly to the front of the SkyPanel and creates a largeraperture with beautiful soft light.
Lamp DIS 4000 W/SE G38 HR UV (Koto) for M40, True Blue D40 & Compact 4000 Theater
Case for 3 lampheads (81 x 36 x 34 cm), with wheels
Super Post main cable for ARTEMIS 2 and TRINITY 2. High capacity 12V/24V, 2 x 12G Video, LBUS, Can Bus, Tally. Lemo 3B 16pin to Lemo 3B 16pin. ARTEMIS 2 and TRINITY 2 only!
Empty SKB case 3i-2317-14BE for the use of the foam insert which comes with the TRINITY head. Inner dimensions: 58.42cm x 43.18cm x 35.56cm / 23in x 17in x 14in Outer dimensions: 65.09cm x 49.53cm x 39.69cm / 25.63in x 19.50in x 15.63in, Weight: 9.25kg / 20.40lb
Control Panel for Orbiter
This upgrade replaces the old radio of ALEXA cameras with the new ARRI EMIP300 white radio. The EMIP300 radio allows the highest possible radio output power within the legal limits determined by the local region. All new cameras and new ECS equipment will be delivered with the EMIP300 radio
The Vertical Format Baseplate allows shooting with the ALEXA 35 on its side for portrait shooting (9:16) and attaches to the ALEXA 35's right side and interfaces with Compact Bridge Plates, Bridge Plate Adapters, Shoulder Pads and the Stabilizer Adapter Mounts.
1820-060-207-A FCA Gold Mount (Camera)
Set of 10 imperial smart focus rings. Plug-andplay with the Hi-5 hand unit. Includes: x K2.0040121; 1x K2.0040122; 1x K2.0040123; 1x K2.0040280; 1x K2.0040124; 1x K2.0040125; 1x K2.0040126; 1x K2.0040127; ;1x K2.0040120 1x K2.0040128
Compatible with Sony Venice 1/2. The Plate comes with two integrated 15mm lightweight supports (at the front and the back) and is compatible with the BPA-5 (K2.0017138) and the BSA-1 (K2.0043749). This plate offers a pair of M4 threads on each side to attach the side brackets left and right.
Case for 4 lampheads (100 x 40 x 34 cm), with wheels
ARRI 650 Plus MAN blue/silver 90 - 250 V. Bare Ends
ARRI 650 Plus MAN blue/silver 90 - 250 V. Schuko
ARRI 650 Plus MAN black 90 - 250 V. Bare Ends
ARRI 650 Plus MAN black 90 - 250 V. Schuko
Articulated accessory holder arm for attaching accessories with 3/8-16 UNC mounting points to cameras with 3/8-16 mounting points. 120mm/4.7 long - with two swivel ball joints and one elbow joint. Has combination fastener system for use with plain 3/8-16 UNC threaded holes orArri 3/8-16 mounting points with locating pins.
Offers front and rear 15mm LWS integrated rod consoles, a pair of ARRI rosettes and direct compatibility to studio bridge plates such as BP-8 and BP-9.
This cheese plate features a detachable center that can be removed to accommodate a Sony BURANO, Sony FX9 (includes height adjustment), or ARRI CCH-4 top handle.
Super Post main cable for artemis and TRINITY Gen1. High capacity 12V/24V, 2x 4G Video, Tally. Lemo 3B 10pin to Lemo 3B 10pin. For artemis Cine and TRINITY Gen.1 only!
Pod to control intercom functions, XLR version
4-leaf barndoor (510 mm/20.1inches)
Double Vertical Yoke for SkyPanel S120
Combo Steel Stand (A1035CS)
Combo Alu Stand (A1035B)
Flexible standard main cable to connect the outer ring of the TRINITY 2 to the inner ring. High capacity 12V/24V, Data, 1 x 12G Video, LBUS, Can Bus, Tally, 0,56m/22in. TRINITY 2 only
The SAM-6 355mm is well-suited to medium sized camera set-ups such as ALEXA 35 and a 24-75mm Signature Zoom. Lenses can be supported by the compact lens support CLS-1 and the plate is compatible to ARRI MAXIMA, TRINITY 1 & 2, Artemis 2 and SRH-3/360.
The 300mm/12 inch Bottom Dovetail Plate is the standard for all prime lenses where minimal balancing is required.
With com PARtments for one WCU-4 - 10 marking rings - 3 batteries - one charger - three CLM motors - one Universal Motor Controller - one ZMU-3A with pan handle - various gear rings - cables and mounting accessories.
Used on current ARRI cameras, this proven viewfinder bracket offers the best adjustment range and sturdiness for this type of viewfinder from the Sony FS7II/ FX9.
This blue/silver Power Supply Unit for SkyPanel S30 LED Light from Arri provides 90-250VAC mains power to the fixture.
This black Power Supply Unit for SkyPanel S30 LED Light from Arri provides 90-250VAC mains power to the fixture.
To connect the SRH-3 Remote Control Panel to the SRH Remote Head or to the External Radio Modules K2.0033757 ERM-2400 (2.4GHz) and K2.0033758 ERM-900 (900 MHz). FS CAN Bus & 12V, Length: 25m/82ft, For SRH-3, SRH-360, ERM SRH, ERM LCS
The handgrip with integrated cable for triggering the Sony F5/F55 using the 4-pin HiRose connector could be used on Arri standard rosette interfaces.
Snaps on rods from above - for diameter 15 mm support rods (Adapter Bridges for FF-3 and FF-4 (not forLFF-1or FF5))
For mounting FF-5 HD orFF-5 Cine on 19 mm studio suppor trods. Can be removed/mounted by user in the field.
For mounting FF5-HD orCine on 15 mm studio support rods. Can be removed/mounted by user in the field.
Snaps on rods from above - for diameter 19 mm support rods (Adapter Bridges for FF-3 and FF-4 (not forLFF-1or FF5))
with RS 3-Pin connector - cables with otherconnectors available
Light Protection Ring Set Pro. Includes: K2.66156.0 1x Connection Ring flexible 52; K2.66157.0 1x Connection Ring flexible 58; K2.66154.0 1x Connection Ring flexible 62; K2.66152.0 1x Connection Ring flexible 67; K2.66153.0 1x Connection Ring Flexible 72; K2.66151.0 1x Connection Ring flexible 77; K2.66155.0 1x Connection Ring flexible 82; K2.66161.0 1x...
Head-to-Ballast cable 2500/4000 W 15 m International connector (VEAM)
ARRI 300 Plus MAN blue/silver 90 - 250 V. Bare Ends
ARRI 300 Plus MAN blue/silver 90 - 250 . Schuko
ARRI 300 Plus MAN black 90 - 250 V. Bare Ends
ARRI 300 Plus MAN black 90 - 250 V. Schuko
ArriLITE 750 Plus MAN blue 100 - 240 V Schuko-Plug
ArriLITE 750 Plus MAN blue 100 - 240 V bare ends
The BUD-3 opens the ALEXA Mini LF to modern and sturdy accessory set-ups developed for ALEXA 35. The BUD-3 accepts ALEXA Mini side brackets as well as the Rear Accessory Brackets RAB-1 and RAB-3.
The two-axis MAC-1 monitor arm allows for rapid positioning of the CCM-1 without affecting the horizon relative to the camera. The MAC-1 features an adjustable friction system for one-handed repositioning and inserts for different mounting standards (1/4" ARRI Pin Lock and SmallHD Pins).
Standard Clamp Console for CLM-3 - With integrated dovetail slide includes magnetic inserts for use with 15mm support rods. Also fits to CLM-4 motor unit.
Special clamp console for use with film cameras and short lenses in the area of the camera mirror shutter. With integrated dovetail slide includes magnetic inserts for use with 15mm support rods. Also fits to CLM-4 motor unit.
Longer SRH Mitchell Mount Collar for the SRH stabilized remote head. Very useful for special cranes. Length: 45mm / 1.77in. Note: Metric thread. For SRH-3 and SRH-360
Spare SRH Mitchell Mount Collar for the SRH stabilized remote head. Length: 40mm / 1.57in Note: Metric thread, For SRH-3 and SRH-360
An adapter that allows mounting an XR Capture Drive in the ALEXA SXT/SXR. Note: The ALEXA XT/XR can use XR Capture Drives without XR Adapter. The XR Adapter is not compatible with SXR Capture Drives.
Spare ERM Power Cable for ERM-2400 & ERM-900, Length: 30 cm/11.8 in
Operating pole 6.5 m (427B-6,5) 4 sections, 3 rises, tube diameters: 28, 24, 20, 16 mm, min.: 199 cm, max.: 650 cm
Optional connector module for Universal Motor Controller UMC-4. Interfaces directly to Fujifilm focus and zoom demands (Hirose 12 pin). Replaces standard Serial connector plate on UMC-4 LDS (K2.0002008)
Viewfinder Cross Pipe RMB-3 Set. Includes: K2.0013302 1x Viewfinder Cross Pipe; K2.0006186 1x Rod Mounting Bracket RMB-3.
An adapter that allows mounting an SXR Capture Drive in the ALEXA SXT/SXR. Note: The SXR Adapter is not compatible with ALEXA XT/XR cameras or XR Capture Drives.
ARRI 150 with line dimmer blue/silver 90 - 250 V. Schuko
Optional connector module for Universal Motor Controller UMC-4. Interfaces directly to - Fujifilm focus and zoom demands (Hirose 12 pin). Replaces standard Serial connectorplate on UMC-4 LDS (K2.0002008)
The VFA-4 optimizes handheld operating with on-board monitors by profiting from the adjustability of classic ARRI viewfinder mounts such as ARRI VMB-3, MVB-1 or VMB-5. The VFA-4 is well suited for operating with suspension harness and suits particularly well the ARRI Camera Control Monitor CCM-1.
The Centre Camera Handle CCH-5 is a full-size production top handle for the ALEXA 35 that can be quickly attached and removed from the LMS-4 without tools. Featuring a wider, more comfortable grip than previous top handles the CCH-5 has been designed to allow common gimbal top plates to remain mounted to the camera, under the handle.
Pivotable clamp arm to attach Master Grips to fluid head pan handles with up to 32mm tube diameter
R1 6 Filter Ring diameter 144,4 mm - For Cooke 20-100.
A low-profile battery adapter that attaches to the back of the ALEXA 35 and accepts any B-Mount battery. The B-Mount Battery Adapter can also be attached to the Power Distribution Module PDM-1 or the Audio Expansion Module AEM-1 when mounted to the camera.
Standard serial connector module (7 pin) for Universal Motor Controller UMC-4. Interfaces to peripheral equipment like UDM-1 and Cinetape distance measurers. Included in Universal Motor Controller UMC-4 LDS (K2.0002008).
Clamp bracket to lock the pan axis of the MAXIMA. For MAXIMA only
ARRI 150 with line dimmer blue/silver 90 - 250 V. Bare Ends
The set contains a 4-pin XLR power cable and a Gold Mount battery holder that can be mounted on the rods of the DRW-1 base plate. K2.0024168 1x SRH Battery Mount for Remote Control Panel, Gold-Mount, K2.0021422 1x 12V Battery Power Cable, D-Tab, 4pin XLR, 1,5m/5ft. For SRH-3 and SRH-360
The Stabilizer System Bracket SSB-2 19mm studio is a adjustable rod console for CSS plates aimed at cameras rigged with long lenses and traditional studio lens supports e.g. LS-9, LS-10 as well as matte boxes, rain deflectors, ring lights and other accessories that require centering on studio rod supports.
The Stabilizer System Bracket SSB-2 15mm studio is a adjustable rod console for CSS plates aimed at cameras rigged with long lenses and traditional studio lens supports e.g. LS-9, LS-10 as well as matte boxes, rain deflectors, ring lights and other accessories that require centering on studio rod supports.
The set contains a 4-pin XLR power cable and a V-Mount battery holder that can be mounted on the rods of the DRW-1 base plate. K2.0024167 1x SRH Battery Mount for Remote Control Panel, V-Mount, K2.0021422 1x 12V Battery Power Cable, D-Tab, 4pin XLR, 1,5m/5ft. For SRH-3 and SRH-360
R1 138 mm Filter Ring diameter 87 mm (no reduction rings) - For ZEISS Vario Sonnar T2/10-100II - and T2.2/11-110.
This Stabilizer Plate helps balance ALEXA Mini/Mini LF cameras on stabilizer systems with heavier prime lenses or shorter zooms that require support. A Balance Utility Dovetail BUD-2 is required if not provided in the camera set. To support smaller zoom, the Compact lens Support CLS-1 is available.
The Base Plate fo the Venice Extension Unit is compatible with the BPA-5 and the ENG-style shoulder bottom part from the plate for Sony Venice. Like with the Sony Venice both can be easily attached by sliding them on and off from front or back. The release button is accessible from both sides. 15mm lightweight rod support standard is integrated.
The ARRI Plate for VariCam LT is an hybrid support that is well-suited to common rental setups using studio bridge plates such as the BP-8 or BP-9, as well as documentary setups using VCT-style base plates like the ARRI QRP-1.
Extends the Ethernet Remote Cable KC 157 (K2.72040.0) or Ethernet Remote Cable KC 158 (K2.72041.0). Three KC 159-S (15m) plus one Remote Cable can be combined for a maximum total length of 47 m (154 feet) or 46 m (151 feet)
The new Top Plate allows the use of the original Sony handle. The middle part of the plate can be removed. Both plates can be used separately if required, e.g. to save weight. The Top Plate is equipped with a variety of 3/8" and RMB-3 interfaces.
Head-to-Ballast cable 575/800/1200/1800 W, 15 m, International connector (VEAM)
Cable set including all of the cables required to allow ALEXA Mini/Mini LF cameras to be connected to the K2.0013648 1820-12G FCA Fiber Camera Adaptor and accessories.
Case for Vibration Isolator SRH Gen. 2 including foam insert. Explorer Case 4820. Dimensions: 520mm x 435mm x 230mm. 20,47 x 19.92 x 9.05 inch
Chimera Lightbank Video Pro Plus "XS", incl. 3 front screens (8115)
Set of 4 scrims (740 mm/29.1inches)
The side-to-side fine adjustment upgrade for TRINITY Gen. 1 can only be performed in conjunction with the DUB-3 (K2.0040347).
modified for soft stops with fingers. Includes: K2.32701.0 - Marking Disk - Flat
The Lightweight Camera Handle LCH-1 is a lightweight carbon-fiber top handle for carrying the ALEXA 35 and for mounting accessories. It can be quickly attached to or removed from the camera's top or the Universal Adapter Plate UAP-3 without tools, and the handle post can be slid forward and backwards to balance the camera in your hand.
The ARRI Top Plate for Canon C700 is a low-mode support, featuring numerous accessory threads and a built-in console for 15 mm LWS rods
Pivotable clamp arm to attach Master Grips to fluid head pan handles with 18mm tube diameter
Power cable to power the SRH-3 and SRH-360 stabilized remote head with 12V and 24V power from high capacity battery providing 12V and 24V power 12V 4pin XLR and 24V 3pin XLR , 0,5m/1.64ft For SRH-3 and SRH-360
Attaches to the back of the ALEXA - ALEXA Plus - ALEXA Plus 4:3 - ALEXA M body - ALEXA Studio - ALEXA HD - ALEXA HD Plus - ALEXA XT - ALEXA XT M body - ALEXA XT Plus or ALEXA XT Studio and accepts V-lock on-board batteries. Batteries can be hot-swapped.
This "Reel Power - Camera Fitting ALEXA attaches to the back of the ALEXA, ALEXA Plus, ALEXA Plus 4:3, ALEXA M body, ALEXA Studio, ALEXA HD, ALEXA HD Plus, ALEXA XT, ALEXA XT M body, ALEXA XT Plus, ALEXA XT Studio, ALEXA SXT EV, ALEXA SXT Plus, ALEXA SXT Studio, ALEXA SXT W or ALEXA LF and accepts Hawk-Woods 26V Reel Power on-board batteries. RP-CFA1 has...
Low-mode plate fitted with an integrated 15mm LWS rod console that provides room for handle and accessories.
Pivotable clamp arm to attach Master Grips to fluid head pan handles with 20mm tube diameter
The MAP-2A is the evolution of the Mini Adapter Plate MAP-2, featuring an improved rod clamping mechanism
Small sides feet, which can be attached laterally to the rosettes of the SRH remote control panel. For SRH-3 and SRH-360
Add a third-party accessory such as a projection, Fresnel, or cyc optic to your Orbiter light with this black Orbiter Docking Ring from ARRI. While ARRI brand Orbiter accessories don't require a docking mount, this docking ring allows you to mount other third-party extensions onto the light using a quick and easy mounting process.
The Low Mode Support LMS-4 is a fully featured top plate for the ALEXA 35. A new quick release mechanism allows the CCH-5 top handle to be easily removed, without tools, while retaining superior rigidity while mounted. Dual rod clamps for optically centered 15 mm rods allow for top mounted motors or traditional viewfinder mounting brackets (using the MVB-1).
The SnapGrid for the SnapBag by DoP Choice attaches to the front of the S60 SnapBag and provides directional light control.
Lamp HMI 1800 W/SE G38 UV (Osram)
Open Face Optic 15 degree Single for Orbiter / Carton Box
Compatible with Sony Venice 1/2. Low-mode support, featuring numerous threads (3/8-16; 1/4-20; M4) for additional accessories and an optical centered built-in 15mm lightweight console with the possibility to use either the original Sony Venice Viewfinder and bracket or ARRI´s Mini Viewfinder Mounting Bracket MVB-1 in combination with the EVF bracket for...
The Top Plate for C300 MkIII/ C500 MkII offers a variety of 1/4-20"; 3/8-16" and M4 threads for additional accessory support such as the RMB-3, CCH-4 (CCH-4 Sliding Adapter option) or CCH-2. An integrated optically centered 15mm lightweight support interface allows to mount 15mm rods or the Mini Viewfinder Bracket MVB-1 (K2.0006140).
Attaches to the back of the Wireless Video Receiver WVR-1 and accepts up to two Sony L-series batteries
Fitting to 15 mm lightweight support rods - this modular shoulderpad makes operating smaller video cameras - DLRs and equipped with film-style accessories and ALEXA M head and ALEXA XT M head much easier. Shipped with both straight and curved foam pads tosuit all operator's needs. Includes: K2.66168.0 - Universal Mounting Bracket (UMB-1) for Lightweight...
TRINITY Joystick Main Cable including the BNC-SMB Cable. 8 pin Lemo 1B to 7 pin Lemo 0B
The newly developed 19 mm hinge allows even more precise positioning of the batteries thanks to the finer ARRI rosette. And as soon as the hinge is locked, the batteries are held securely and without any play or vibrations. It is also possible to use two hinges on the ARTEMIS 2 and TRINTY 2. This allows the batteries to be positioned even more freely and...
ARRI 150 with line switch blue/silver 90 - 250 V. Schuko
F2 Filter Frame round - For round filter diameter 138mm.
Arri branded Peli 1510 Carry On case for accessories - cabin size with flexible dividers
The diopter frame allows 138 mm diopters of up to +2 to be used in a lightweight matte box such as the ARRI LMB-25. The frame has the width of two 4 x 5.65 filter frames and fits into a 2- or 3-filter stage. A safety mechanism prevents the diopter from falling out of the frame during exchange, while two ? threads permit the frame to be attached to an...
Extends focus knob out to clear large studio matte boxes.
Attaches to the top of the ALEXA - ALEXA Plus - ALEXA Plus 4:3 - ALEXA M body - ALEXA HD - ALEXA HD Plus - ALEXA XT - ALEXA XT M body or ALEXA XT Plus and accepts V-lock on-board batteries. Batteries can be hot-swapped.
Attaches to the top of the ALEXA - ALEXA Plus - ALEXA Plus 4:3 - ALEXA M body - ALEXA Studio - ALEXA HD - ALEXA HD Plus - ALEXA XT - ALEXA XT M body - ALEXA XT Plus or ALEXA XT Studio and accepts Gold mount on-board batteries. Batteries can be hot-swapped.
The strong hinge locks via a rosette and mounts through a standard 3/8-16 interface with removable anti-rotation pins. The Arri Rosette Based Hinge is not limited to the Recorder and Battery Bracket - and can be used for other purposes.
Connects Universal Motor Controller CAM connector to the EXT connector on the ALEXA family of cameras. Provides camera RUN/STOP function, tally and camera status information on WCU-4. Enables WCU-4 ALEXA Remote License for ALEXA cameras without the Plus module.
Conversion Kit from TRUE BLUE ST1 and T2 to theatre version: theatre cassette with barndoor insert
With no frame or mounting hardware required, the Chimera POP Bank is easy to assemble and transport. This professional grade soft box will increase the light aperture of the SkyPanel and comes with a full and half diffusion. This soft bank is the perfect accessory for creating an even softer beam field.
Mini joystick control which can be mounted at the frame of the MAXIMA right above the rubber handle. For Tilt and Pan. Note: Roll have to be done with the wireless remote control K2.0010337. For MAXIMA
Analog joystick cable to connect the analog TRINITY Gen.1 Joystick with TRINITY 2. Lemo 1B 8pin to Lemo 0B 7pin, no video. TRINITY 2 only
Arri 150 with line switch blue/silver 90 - 250 V bare ends
ALEXA LPL LF FSND 0.9
Arri AMIRA branded soft carry bag. For AMIRA camerawith MVF-1 - camera adapter and zoom lens.
ALEXA LPL LF FSND 2.4
ALEXA LPL LF FSND 1.8
ALEXA LPL LF FSND 1.5
ALEXA LPL LF FSND 1.2
ALEXA LPL LF FSND 2.1
ALEXA LPL LF FSND 0.6
Longer and more flexible main cable to connect the outer ring of the TRINITY 2 to the inner ring. Data, 1 x 12G Video, LBUS, Can Bus, 0,65m/26in. TRINITY 2 only
The Vertical format Adapter set is required to use the ALEXA Mini with the sensor orientated portrait ("vertically").
Main Cable with Lemo 3B / High Cap 12V & 24V / 2 x HD SDI / 1x SD Video / Tally
The battery plate allows industry standard battery mounts such as V-mount and Gold Mount to fit to 15mm LWS rods. The battery plate can be offset in order to clear rear card slots or optimize balance. Note: Battery adapters will be available separately and are not part of BAP-1.
An optional non-rotatable third filter stage for the LMB 4x5. Can be used as a stand-alone filter stage with all LMB 4x5 clamp adapters. The LMB 4x5 sunshade can be mounted directly to the front of the filter stage
ALEXA LPL LF FSND 0.3
DC Cable 10 m (4-Pin 30A) S360-C
To connect the SRH-3 Remote Control Panel to the SRH Remote Head or to the External Radio Modules K2.0033757 ERM-2400 (2.4GHz) and K2.0033758 ERM-900 (900 MHz). FS CAN Bus & 12V, Length: 10m/32.8ft, For SRH-3, SRH-360, ERM SRH, ERM LCS
The ARRI Top Plate for Canon C200 is a low-mode support, featuring numerous accessory threads and a built-in console for 15 mm LWS with the possibility to use either the original C200 or the ARRI CCH-2 top handle
The Articulated Mounting Plate AMP-1 is a hinged plate that allows accessories to be mounted in locations that would have previously prevented access to various camera ports. The AMP-1 allows further adjustment up/down in relation to its attachment bracket.
The Rear Accessory Bracket RAB-2 allows accessories to be mounted behind the ALEXA 35. This can be done for organizational reasons or to better balance the camera. It requires the Top Extension Bracket TEB-1 to be attached to the top of the camera, and the Balance Utility Dovetail BUD-1 to be attached to the bottom of the camera.
The set includes the counterweight consisting of two half shells and two Delrin adapters for the 1.8in and the 1.5in center post.The Delrin adapters make it possible to mount the counterweight on both the outer 1.8in post and the 1.5in telescoping inner post. The Counterweight is made of stainless steel.
With compartments for one SXU-1, 5 marking rings, 2batteries, one charger, one CLM motor, one Mini Motor Controller (e.g. SMC-1), various gears, cables and mounting accessories.
Case for 2 lampheads (70 x 39 x 37 cm)
Set of 4 scrims (571 mm/22.5")
Case for 3 lampheads (81 x 36 x 34 cm)
The SnapBag for the S30 by DoP Choice attaches directly to the front of the SkyPanel and creates a larger aperture with beautiful soft light.
16-Chamber Eggcrate for SkyPanel S120
The triple filter frames accommodate two or three filters in a single filter frame taking two regular matte box slots and prevent unwanted reflections between glass filter surfaces. Although compatible with some legacy ARRI matte boxes, the triple filter frame achieves maximum benefits when used in combination with the tilting matte box SMB-1. Fits in a...
Universal wrench for the SRH Castle Nut / Mitchell Mount
Includes eyepiece leveler rod and 1/4-20 thread adapter.
Extension cable to connect the SRH remote control panel and the SRH remote head.
Allows one or two glass filters to be stacked and angled, providing a quick and elegant solution for reducing unwanted reflections. Fits in a 2-stage slot of a filter stage
A coiled cable that connects the Heated Eyecups HE-3, HE-4, HE-5, HE-6 and HE-7 to the RS connector on ARRI cameras.
Monitor bracket for Hi-5 Nato-rail. For tool-less mounting of monitors with 1/4" thread, with or without anti-twist locating pins. Includes 160° tiltmechanism and ARRI 3/8"-16 thread.
The ARRI Viewfinder Cross Pipe can be used in combination with the Viewfinder Mounting Bracket MVB-1 to attach ARRI or third party viewfinders in combination with the EVF brackets from ARRI PCA
The Double Vertical Yoke allows for mount two SkyPanel S60 fixtures one directly above the other.
Lightweight Lens Support LLS-1 Set
Unlocks remote control of frame rate, shutter angle, ISO, white balance, ND filters, playback and camera user buttons. Supported features depend on camera model and camera settings.
Weighting in at less than half traditional top plates, The MAP-4 for ALEXA Mini LF is a minimal adapter to the range of lightweight accessories for ALEXA 35, such as the Lightweight Camera Handle LCH-1.
Connects the Electronic Viewfinder EVF-1 to the EVF socket on ALEXA and ALEXA XT cameras. Longest possible length for use with specialty rigs.
Unlocks synchronized control of iris motor and the cmotion Cinefade VariND filter for gradual transition between deep and shallow depth of field at constant exposure.
The Stabilizer Adapter Mount SAM-8 is a low-profile sliding dove tail plate that connects the ALEXA 35 to Tiffen Steadicam products, such as M1 and M2.
Main cable for ARTEMIS 2 and TRINITY 2. High capacity 12V/24V, Data, 2 x 12G Video, LBUS, Can Bus, Tally. Lemo 3B 16pin to Lemo 3B 16pin. ARTEMIS 2 and TRINITY 2 only!
Unlocks bi-directional communication between Hi-5 hand unit with Radio Interface Adapter RIA-1 and the Cine RT Ultrasonic Rangefinder System. Enables Cine RT setup from the Hi-5 hand unit and real-time distance marks on the Hi-5 lens data display.
Top plate required for use of ALEXA Mini LF and Vertical adapter. Features interfaces for CCH-2 handle, MVB-1 and VMB-3 viewfinder brackets and tape hooks. Included in KK.0024136 Vertical Adapter Set for ALEXA Mini LF
The SAB-1 allows users to position accessories towards the rear of the ALEXA Mini in order to optimize balance and bulk. Includes: K2.0012692 1x Side Accessory Bracket SAB-1; K2.0006186 1x Rod mounting bracket RMB-3; K2.66255.0 1x 15 mm Reduction Insert
Attaches to the Side Camera Handle (SCH-1) instead of the Adjustable Center Grip Medium (ACG-1). Provides enough space for third PARty on-board recorders of different heights.
R12 Clamp-OnRing 156-150 mm - for use with Cooke 18-100 mm + 25 -250 mm Cinetal + Arri VPs
Head-to-Ballast cable 2500/4000 W 7 m International connector (VEAM)
Attaches to the top of the ALEXA, ALEXA Plus, ALEXA Plus 4:3, ALEXA M body, ALEXA Studio, ALEXA XT, ALEXA XT M body, ALEXA XT Plus or ALEXA XT Studio camera and provides numerous 3/8"-16 UNC threaded mounting points for accessories. Can be used when the BATG adapter is attached to the top of the camera, but not with the BAT-V adapter or when any on-board...
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips. Includes: K2.0012917 1x Handgrip Extension 240mm; K2.0012921 2x Cable Clip 15mm.
Operating pole 4 m (427B-4,0) 4 sections, 3 rises, tube diameters: 28, 24, 20, 16 mm, min.: 140 cm, max.: 400 cm
Lens case for 5 lenses empty (36 x 21 x 41 cm)
Lamp DIS 1800 W/SE G38 (Koto)
Conversion Kit from M40 to AS 40: PAR Reflector, three brackets and one top latch
The Arri 4-Leaf Barndoors for LED SkyPanel S60 is a lightweight accessory that helps diminish spill light and control the beam spread of the S60 LED panel
Wheel set with brakes 160 mm/M10 mount with brakes (374)
The SnapGrid for the S60 by DoP Choice attaches directly to the front of the SkyPanel and provides for directional light control.
Enables the Wireless Compact Unit WCU-4 to change settings on ALEXA cameras.
1800 2071A Tally Box
Connects the Electronic Viewfinder EVF-1 to the EVF socket on ALEXA and ALEXA XT cameras. Ideal length for use of EVF-1 on camera right side or when using Viewfinder Extension Bracket VEB-1 or VEB-3.
New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery body is established via the so-called pogo pins. A special coding of the pogo pins makes it possible to identify the battery type and, if present, to communicate digitally with the...
New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery body is established via the so-called pogo pins. A special coding of the pogo pins makes it possible to identify the battery type and, if present, to communicate digitally with the...
New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery body is established via the so-called pogo pins. A special coding of the pogo pins makes it possible to identify the battery type and, if present, to communicate digitally with the...
Reinforced dovetail plate for SRH-3, SRH-360, TRINITY, MAXIMA. Length: 31,5cm, 12,4in, Weight: 250gr / 6.7oz
2- PARt bellow ring (R1)designed to follow the tilt movement of the SMB-1. Compatible with all R8 screw-on rings (and R4 screw-on rings via K2.66095.0)
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips. Includes: K2.0012911 1x Handgrip Extension 160mm; K2.0012921 1x Cable Clip 15mm.
The Adapter is allows quick transition between Tripod / Shoulder and DJi Ronin 2 stabilizer for ALEXA Mini and ALEXA, Mini LF with Compact Bridge Plates CBP-1 (19mm studio) and CBP-2 (15mm studio). The CBP Adapter fits to the Ronin 2 "camera base plate"
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips
Arri's Lightweight Bridge support LBS-2 comes with hard-mounted rosettes - offering support for handheld set.
Compatible with MBP-3 - MBP-1 Pro BP - Adapter Plate for Canon C100/300/500 - Adapter Plate for SonyF5/F55 - Adapter Plate for Canon 1DX-1DC - Adapter Plate for RED Epic/Scarlett
The top plate for Sony F5 and F55 cameras is designed to offer multiple mounting interfaces for accessories. An Arri handle can be attached at three different positions to optimize balance - although the original Sony handle remains compatible. With its multiple centered interfaces - the top platecan also be used as a low mode plate for Steadicam shots.
R1 138 mm Filter Ring diameter 80 mm - For ZEISS Standard Primes with rubber sleeve and connection ring. When using physically short Lenses such as ZEISS Standards - K2.34131.0 - R1 Intermediate Ring is required in addition.
Compact case for up to 4x Wireless Video Receivers WVR-1, 1x Wireless Video Transmitter WVT-1, cables and accessories
The B-Mount Battery Adapter for SkyPanel allows for the attachment of one B-Mount style battery to the SkyPanel. With a short cable, the battery adapter makes the SkyPanel truly mobile. Only one battery is required to supply the correct voltage to the lamphead.
The V-Mount Battery Adapter for SkyPanel allows for the attachment of two V-Mount style batteries to the SkyPanel.
The Battery Adapter Plate for Anton/Bauer allows for the attachment of two Gold Mount style batteries to the SkyPanel.
Head-to-Ballast cable 575/800/1200/1800 W, 7 m, International connector (VEAM)
Redesigned and improved post clamp that clamps onto the 1.5" inner post and directly onto the 1.8" outer post with an insert. The use of now two bolts holding the Rossette block ensures maximum rigidity. NOTE: Sachtler rosette
Redesigned and improved post clamp that clamps onto the 1.5" inner post and directly onto the 1.8" outer post with an insert. The use of now two bolts holding the Rossette block ensures maximum rigidity. NOTE: ARRI Rossette
Newly developed Rain Cover for SRH-3 and SRH-360. Due to the flexible materials, the rain cover adapts perfectly to the shape of the remote head. The padded outside of the Rain Cover offers extra protection. NOTE: The set includes two different pan axis covers for the SRH-3 and SRH-360.
FSND 0.6
Connects the Electronic Viewfinder EVF-1 to the EVF socket on ALEXA and ALEXA XT cameras. Ideal length for use of EVF-1 on camera left side in handheld mode.
The camRade wetSuit ARRI ALEXA Mini is a rain cover that protects your ARRI ALEXA Mini camera against the elements. It is made of water-resistant fabric with a soft lining and minimalizes unwanted sound effects during operation.
FSND 0.3
Professional grade 256 GB CFast 2.0 memory card by SanDisk. Recording capacity approx. 24min 2.8K ARRIRAW, 15min 3.4K OG ARRIRAW, or 67min 2K 16:9 ProRes 4444 XQ at 24 fps.
FSND 1.5
FSND 0.9
FSND 1.2
To connect the SRH-3 Remote Control Panel to the SRH Remote Head or to the External Radio Modules K2.0033757 ERM-2400 (2.4GHz) and K2.0033758 ERM-900 (900 MHz). FS CAN Bus & 12V, Length: 1m / 3.2ft, For SRH-3, SRH-360, ERM SRH, ERM LCS
FSND 1.8
FSND 2.1
FSND 2.4
To speed up the assembly of the stabilized remote head to the BLACK ARM by Flowcine, a second SRH Castle Nut should already be permanently placed in the mount of the BLACK ARM. To do so, a second SRH Castle Nut is needed. Having a spare castle nut is always advisable, in case the original SRH-3 castle nut goes missing. Note: Imperial thread. For SRH-3 and...
Pro Set 15mm Reduction Insert. The 15 mm reduction insert can be fitted to any 19 mm rod mount to allow compatibility with 15 mm rods. Includes: K2.66255.0 10x 15mm Reduction Insert
Zip Gear Basic Set. Includes: K2.66131.0 2x Zip Gear
Connects ARRI cforce RF motor/cmotion cPRO motor and camin to Sony F5/55 cameras and D-Tap power source. Provides camera RUN/STOP function and tally. Length: 0.6m/2ft
Connects ARRI cforce RF motor/cmotion cPRO motor and camin to LANC connectors (e.g. Canon C300 / C500) and D-Tap power source. Provides camera RUN/STOP function and tally on ARRI and cmotion cPRO hand units
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips. Includes: K2.0012913 1x Handgrip Extension 80mm; K2.0012921 1x Cable Clip 15mm.
ARRIs Universal Bridge Support UBS-3 offers compatibility with 19 mm studio, 15 mm studio and 15 mm lightweight rods and comes with hard-mounted rosettes with a total weight of only 240g
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips
For using handgrips with rosettes on: K2.66173.0 1x Adapter Plate for Canon EOS C100 /300/500 and/or the Cage System
R1 6 Filter Ring diameter 114 mm - With rubber sleeve for Master Prime Lenses - UP14 mm - UP180mm - LDS-UP 14 mm and LDSUP 180 mm. Takes reduction rings size R4
R1 138mm Filter Ring diameter 95 mm - For Ultra Primes 16-135mm with rubber sleeve and connection ring. Not for use with wide angle video zooms.
R1 138mm Filter Ring diameter 114 mm - With rubber sleeve for Master Prime Lenses - UP14mm - UP180mm - LDS-UP 14 mm and LDSUP 180 mm. Takes reduction rings size R4
R1 6 Universal Filter Ring diameter 150mm - For VP1 - VP2 - VP3 - Cooke18-100 and Cinetal 25-250. - Takes reduction rings size R8
R1 Reflex Prevention Ring diameter 156mm - For UP 10 mm - UP 12mm and LDS-UP 12 mm.
Hand Grip Set for MMB-2 (pair)
Connects LCUBE CUB-2 to the 12 pin Hirose lens connector on the AMIRA/ALEXA Mini PL LDS Lens Mount, the B4 Lens Mount, and third party cameras. Enables camera auto-iris function while using Master Grips for focus and zoom. Supports analog iris control signals from ENG/EFP cameras. Length: 0.3m/1ft.
The DoPchoice SnapGrid S 40 from ARRI attaches directly to the front of small DoPchoice Snapbag, including the Snapbag S for Orbiter. In addition it fits the Chimera Lightbank for S30 and the Chimera POP Bank for S60.
The SnapGrid for the SnapBag by DoP Choice attaches to the front of the S30 SnapBag and provides directional light control.
The Double Vertical Yoke allows for mount two SkyPanel S30 fixtures one directly above the other.
Lamp HMI 2500 W/SE XS G38 (Osram)
Cable set includes: 1x Genlock, 1x SDI return video, 2x SDI out, 1x Monitour out, 1x Time code
For attaching at the Cage System
Attaches to ALEXA M Bridge Plate Adapters (AMB-1/2)
The CSP-2 is a very light, flat shoulder pad with a long Visco pad for the ALEXA 35. Its four feet allow the camera to be safely seated on a flat surface when not on the operator's shoulder.
The camRade wetSuit for ALEXA Mini/ Mini LF is a rain cover that protects your camera against the elements.
AMIRA Raincover - proven camRade raincover to protect AMIRA against heavy rain and more
The Compact Lens Support CLS-1 fits directly to the front groove of the Stabilizer Plate for CBP 450mm/18in and 355mm/14in to supports heavier prime lenses and smaller zooms such as the Signature Zoom 16-32mm. With lenses with support height reach under the level of the stabilizer mount, The Stabilizer Systems Bracket SSB-2 19mm or 15mm is advised.
Reinforced dovetail plate for SRH-3, SRH-360, TRINITY, MAXIMA. Length: 200mm, 7,87in, Weight: 190gr / 6.70oz
The Stabilizer Adapter Mount SAM-Zero is the standard camera plate for most ARRI Camera Stabilizer systems products. The 254mm (10) plate will allow most camera featuring 3/8 threads on the base to be safely mounted to ARRI Trinity, ARRI MAXIMA, ARRI SHR-3 and SRH-360. Includes: 2x 3/8" Screws
To speed up the assembly of the SRH stabilized remote head to the BLACK ARM by Flowcine, a second SRH Castle Nut should already be permanently placed in the mount of the BLACK ARM.
The shortest of our Bottom Dovetail Plates fits very well on camera carts, car mounts, Steadicam or with any applications when balancing is not necessary, but the interface is welcome to work with an SBP-1 or BP-8/-9.
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips
Allows one or two glass filters to be stacked and angled, providing a quick and elegant solution for reducing unwanted reflections. Fits in a 2-stage slot of a filter stage and is compatible with LMB-25, LMB-15 and LMB-5
2-part bellow ring (R2) designed to follow the tiltmovement of the SMB-2. Compatible with all R4 screw-on rings.
With rubber sleeve for UP 14 mm - UP 180mm - LDS-UP 14 mm and LDS-UP 180mm. Not compatible with Master Prime Lenses 14 mm and 16 mm. Takes reduction rings size R4
Filter orients vertically when inserted from above.
The handle adapter allows to attach the Panasonic AU-EVA1 handgrip at a handgrip extension. This allows to extend the distance between camera and handle. Using the HGA-3 requires a longer, separately sold LANC cable
Allows the Compact Bridge Plate to convert into a Stabilizer Adapter Mount for ALEXA Mini (SAM-2). The Stabilizer Plate for Compact Bridge Plate is also compatible with third party stabilizer systems fitted with a standard 60mm dovetail.
The foam insert for LMB 6x6 fits perfectly into any kind of the Peli Case 1637. It is included in all LMB 6x6 sets (LMB 6x6 Clamp On 3-Stage Set, LMB 6x6 15mm Studio 3-Stage Set, LMB 6x6 19mm Studio 3-Stage Set, LMB 6x6 Pro 15mm Studio Set and LMB 6x6 Pro 19mm Studio Set)
This baseplate fits to ALEXA Mini/Mini LF and is the common interface to the Compact Bridge Plate CBP-1/CBP-2 and Stabilizer Adapter Mount SAM-2. The BUD-2 is available separately to complement Stabilizer plates for CBP 225mm/9in, 355mm/14in and 450mm/18in.
The Clamp 2 for RAB-1 offers a strong and reliable connection to the Rear Accessory Bracket RAB-1. The Clamp 2 features a safety lock to prevent the battery plate dismounting unintentionally
The Rear Accessory Bracket RAB-1 offers lightweight and flexible attachment options for power solutions. Fits ALEXA Mini / Mini LF
R2 138 mm Filter Ring diameter 114 mm - Compatible with Master Prime Lenses - UP 14mm - UP 180 mm - LDS-UP 14 mm and LDS-UP 180 mm. Takes reduction rings size R4
The triple filter frames accommodate two or three filters in a single filter frame taking two regular matte box slots and prevent unwanted reflections between glass filter surfaces. Although compatible with some legacy ARRI matte boxes, the triple filter frame achieves maximum benefits when used in combination with the tilting matte box SMB-2. Fits in a...
R8 Screw-In Reduction Ring 150-125 mm
R7 Clamp-On Ring 130-85 mm - JVC HD-100
F2 Filter Frame 4x4 - geared
Adjustable monitor bracket compatible with monitors with screen sizes up to 9". The AMM-1 secures monitors via top and bottom standard 1/4"threads. The AMM-1 mounts to 19mm rod, such as the rod for Director's Monitor Support DMS-1
The ARRI Unit Bag Large II offers the maximum space for your accessories. The Bag comes with a detachable zipped document bag that provides additional space for documents or a tablet. It fits to the top of the lid with the aid of fabric hook-and-loop strips
Panel Carrying Bag for SkyPanel S120 (for max. 4 panels or honeycombs)
Snoot for SkyPanel S120
Coupler to extend SRH FS CAN Bus Cables like: K2.0033762 SRH FS CAN Bus Cable, 1m/3.2ft, K2.0019302 SRH FS CAN Bus Cable, 10m/32.8ft, K2.0019301 SRH FS CAN Bus Cable, 25m/82 ft, FS CAN Bus & 12V, Length: 0.2m/0.65ft, For SRH-3 and SRH-360
Includes arm posts diameter 15.8 mm (5/8'') - length 76 mm (3'') and 300 mm (12''). Works all spring arms and gimbals which are compatible to diameter 5/8'' (15.8 mm) arm posts
Stabilizer System Bracket 6 (Basic Set)
Additional cheese plate which can be mounted to the right side at the top of the MAXIMA. The mounting plate many offers 3/8'' threads. Length: 12,7 cm Width: 9,2 cm / Length: 5'' Width: 3.62''. For MAXIMA only
Connects SMC-1 and EMC-1 motor controllers to LANC connectors and Arri PSC power cables. Provides camera RUN/STOP function. Additional Power Supply Connector (PSC) cable required.
Flexible Shaft Short (300mm)
ALEXA LPL LF IFM Optical Clear
The ARRI Look Library is a comprehensive set of predefined looks for ARRI cameras with advanced look management. It provides a set of high quality looks and offers a basic repertoire of color responses like film stocks and filters did for film cameras
An attachment that allows the AMIRA viewfinder to be mounted to two 15 mm lightweight rods above the lens - as can be found on the Universal Adapter Plate UAP-2 (K2.0001221). This bracket is already included in the Universal Adapter Plate UAP-2 Set (K0.0001280).
Includes arm posts diameter 15.8 mm (5/8'') - length 76 mm (3'') - 254 mm (10''). Works all spring arms and gimbals which are compatible to diameter 5/8'' (15.8 mm) arm posts
Cheese plate like accessory mounting bracket which allows to add additional accessories, like transmitters to the right side of the SRH stabilized remote head. For SRH-3 and SRH-360
The SAM-1 offers optical-centered mounting of ALEXA Classic, XT, SXT and LF cameras (not ALEXA Studio, ALEXA M or ALEXA 65) on the ARRI Trinity and MAXIMA system. The SAM-1 is also compatible with third-party stabilizer systems fitted with a standard 60 mm dovetail
Attaches the eyepiece leveler EL-3 to Sachtler fluid heads
The Top Plate is attached to the Extension unit with four screws. It offers plenty of interfaces (3/8-16 and 1/4-20 with anti-twist pin holes; RMB-3; CTH-1; CCH-2 and CCH-4; 15mm LWS Rod Console at the back). It includes an optically centered 15mm lightweight rod support with individual rod clamps. An interface at the back offers the usage of ARRI´s 15mm...
The LLS-1 is a multifunctional solution for lenses with a diameter between 39 mm and 153 mm. It offers a 3/8" and a 1/4" interface for lenses with an included lens support pin. Lenses without a pin, such as an Alura Lightweight Zoom, Prime lenses, or still photo lenses can be supported by using the bracket with plastic support rollers.
This lightweight rod adapter offers 15mm LWS standards to the Compact Bridge plates CBP-1 (19mm) and CBP-2 (15mm) baseplates for ALEXA Mini/ Mini LF.
The ARRI Top Plate for Panasonic AU-EVA1 is a lightweight support featuring numerous accessory threads and a built-in console for 15 mm LWS rods
The Rosette Adapter RA-3 adapts the existing handgrip K4.72172.0 and the HEB interface to the Arri rosette style.
R1 138 mm Filter Ring diameter 161 mm
Mattes for MMB-2 (5 pieces)
LBUS-Y-cable for additional power source (1x Fi m3p coupler, 2x Le m4p) Length: 0.4m/16in
Connects Universal Motor Controller CAM connector to LANC connectors (e.g. Canon C300/500). Provides camera RUN/STOP function and tally. Length: 0.5m/1.6ft. Separate UMC-4 RS IN cable for power supply required.
SkyPanel Center Mount Handling Kit (including Center Mount Yoke and SkyPanel Side Handles)
The 60? Honeycomb for the S60 controls the light by reducing the beam angle to approx. 60?.
The 30? Honeycomb for the S60 controls the light by reducing the beam angle to approx. 30?.
The Center Mount Yoke is a ball-in-socket yoke that allows for positioning the SkyPanel in almost any orientation including vertically.
Frameglow mask for ALEXA Studio or ALEXA XT Studio in 4:3 or 16:9 mode with spherical lenses. Includes rectangles for 1.78:1 and 2.39:1 (flat) and stubs for 1.33:1 inside of 1.78:1.
his ARRI RA-8 Rosette Adapter attaches an OCU-1 Operator Control Unit to your ZMU-4 Zoom Control Unit.
Handgrip Extension - long
Frameglow mask for ALEXA Studio or ALEXA XT Studio in 4:3 mode with 2x anamorphic lenses. Includes one rectangle for 2.39:1 (Scope 2x) and stubs for 1.78:1.
Compact case for 1x Set Master Grips (left/right), 2x handgrip extensions, 1x extension tube, 3x motors, 2x LCUBE incl. bracket, cables
The ARRI Handle for RED DSMC2 features an integrated 15 mm LWS rod console for the mounting of accessories. A handy monitor bracket allows the camera monitor to be repositioned on top-mounted 15 mm LWS rods.
For ZEISS Vario Sonnar. Takes reduction rings size R6
Filter Frame for LMB 6x6 and LMB-6.
For UP 16 mm-135 mm - 16 mm zooms and medium-focal-length video zooms. Notfor use with wide-angle video zooms.
Internal focus lenses only - Compatible with Master Prime Lenses - LWZ Alura - UP 14 mm - UP - 180 mm - LDS-UP 14 mm and LDS-UP 180 mm - also compatible with wide-angle video lenses. Not compatible with external focus lenses. - For use with MMB-1 top load.
R1 Reflex Prevention Ring diameter 134mm - For Arri/FUJINON Alura Zooms.
R1 Reflex Prevention Ring diameter 136mm - for Canon FK 14.5-60 - FK 30-300
F5 Filter Frame Combo 4x5.65/5x5 - Accepts 4x5.65 filter horizontally (4x5.65filter orients horizontally when inserted from above) or vertically or 5x5 filter (5x5 filter orients vertically when inserted from above).
R1 Reflex Prevention Ring diameter 150mm - For VP1 - VP2 - VP3 - Cooke18-100 and Cinetal 25-250.
Lamp DIS 2500 W/SE G38 UV-B (Koto)
The set consists of two different counterweights. The larger counterweight weighs 300 gr / 0.66 lb, the two smaller counterweights weigh 150 gr / 0.33 lb each. The larger counterweight is equivalent to the weight of a cforce mini motor. Thus, the counterwight are perfect for getting difficult camera setups into perfect balance.
This Light Intensifier Panel for SkyPanel S60 LED Light from Arri increases output by up to 50%
SkyPanel Remote
The Stabilizer Adapter Mount SAM-7 is a low-profile sliding dove tail that connects the ALEXA 35 to ARRI Artemis and GPi PRO Stabilizers.
The ARRI Unit Bag Medium II comes with a detachable zipped document bag that provides additional storage space for documents or a tablet. It fits to the top of the lid with the aid of fabric hook-and-loop strips
Easy detachable magnetic rear filter holder- fits all ARRI Signature Primes and Signature Zooms. One magnetic rear filter holder is included with each ARRI Signature Prime and Signature Zoom.
The thin and lightweight Balance Utility Dovetail BUD-1 attaches to the underside of the ALEXA 35's, where its dovetail allows the camera to be securely and quickly attached to all other ALEXA 35 bottom accessories. The dovetail also allows significant balancing adjustment of the camera on all other shoulder pad, bridgeplate and SAM plates.
Provides REC, BAT and FULL warning indicators in the bottom of the optical viewfinder frame when a blank ground glass is used on ALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio
The Stabilizer Adapter Mount SAM-6 is a low-profile sliding dove tail plate that connects the ALEXA 35 to ARRI CSS products, such as ARRI TRINITY and SRH-3/360
The Stabilizer Adapter Mount SAM-9 is a low-profile sliding dove tail that connects the ALEXA 35 to DJI Ronin 2.
F4 Filter Frame Combo 4x5,65/4x4 - For use with MB-29
Compatible with ARRI's CLM-5, cforce mini, cforce mini RF, Operater Control Unit OCU-1 and cmotion's cPro motor. Includes: K2.0038503 1x cforce mini Clamp Insert 2 19/15mm
Connects ARRI cforce RF motor/cmotion cPRO motor and camin to RED CTRL connector on RED Epic DSMC-2 and RED Weapon cameras and D-Tap power source. Provides camera RUN/STOP function, tally and control of EF lenses
Flexible Sunshade Side Flag Holders Set. Includes: K2.0033772 1x Flexible Sunshade LMB 4x5; K2.0036441 1x LMB Side Flag Holders.
The Mini Side Bracket MSB-2 offers support for lens motor in configurations that require lightweight baseplates with no rod support, such as lightweight stabilizer systems or drones.
F2 Filter Frame 4x4 - non-geared
Filter orients horizontally when inserted from above.
Cable CAM (7p) - Sony Remote (8p)/D-Tap (0.8m/2.6ft)
Connects Universal Motor Controller UMC-4 to RED Weapon. Provides camera RUN/STOP function and tally. Length: 2x 0.5m/1.6ft. Note: Do not use with RED DSMC2 BASE EXPANDER and RED EPIC
DROP-IN lens super flood frosted honeycomb silver (3 mm/11.8inches)
Short Yoke for SkyPanel S360-C (incl. Pin)
Snoot (413 mm/16.3inches) with variable aperture
DROP-IN lens super flood honeycomb red (3 mm/11.8inches)
DROP-IN lens flood large rectangle green (3 mm/11.8inches)
DROP-IN lens narrow flood small rectangle black (3 mm/11.8inches)
DROP-IN lens spot blue (3 mm/11.8inches)
8-leaf barndoor TRUE BLUE (344 mm/13.5inches)
Extra Diffusion Slot for SkyPanel S120
The RAB-3 is a rear accessory bracket for ALEXA Mini LF optimized for the new utility base BUD-3. Note a classic RAB-1 for ALEXA Mini LF can be turned in to a RAB-3 by removing the lower end of the RAB-1 in order to connect direct to the RAB-1.
Cable to connect the Hi-5 hand unit to a cmotion cdistance. LBUS (angled) - .LBUS (angled 270° rotated). Length: 0.2m/8in.
A follow focus gear with the 0.8 module used with cine lenses, optimized with 43 teeth for zoom lenses, extra width of 45mm for zoom lenses with large barrels or lenses with extending element when pulling focus.
25mm wide gear for moving lens barrels
Connects LBUS devices (e.g. Master Grips). Includes two angled LBUS connectors. Length: 0.6m/2ft
Connects LBUS devices (e.g. cforce motors). Includes two angled LBUS connectors. Length: 0.2m/8ft
64 tooth - 0.8Metric Module Gear - When used with FF5-HD - approximates drive ratio of FF-4.
Connects LBUS devices (e.g. Master Grips). Includes two angled LBUS connectors. Length: 0.8m/2.6ft
The Camera Side Bracket CSB-1L allows mounting of accessories to the left side of the ALEXA 35 without obstructing the user buttons. It features an ARRI rosette for hand grips and multiple 1/4-20, 3/8-16 and M4 mounting holes.
The Camera Side Bracket CSB-1R allows mounting of accessories to the right side of the ALEXA 35 without obstructing the user buttons. It features an ARRI rosette for hand grips and multiple 1/4-20, 3/8-16 and M4 mounting holes. It can be extended with the Camera Side Bracket CSB-1R Extension (K2.0034189).
The Vertical Top Plate attaches to the ALEXA 35's left side and acts as a top plate to support the Lightweight Camera Handle LCH-1.
A tool-less, screw-in 15 mm studio support adapter that fits on either the LMB 4x5 15 mm lightweight console or the LMB 4x5 swing-away tilt module
Connects the Ethernet socket of the ALEXA, ALEXA XT, ALEXA SXT and ALEXA LF family of cameras (Lemo 10 pin) to the Ethernet socket on the RCU-4 (Lemo 10 pin). This is a good length cable when the RCU-4 is used close to the camera. Can be extended with ALEXA Ethernet Extension Cable (K2.72043.0)
A tool-less screw in 19 mm studio support adapter which fits on either the LMB 4x5 15 mm lightweight console or to the LMB 4x5 swing away tilt module
F1 Filter Frame 4 inch x 5.65 inch for 6.6 inch x 6.6 inch, non geared for 6.6 inchx6.6 inch Matte Boxe
Connects the Ethernet socket of the ALEXA, ALEXA XT, ALEXA SXT and ALEXA LF family of cameras (Lemo 10 pin) to the Ethernet socket on the RCU-4 (Lemo 10 pin). This is a good length cable when the RCU-4 is mounted on the camera. Can be extended with ALEXA Ethernet Extension Cable (K2.72043.0)
Orbiter P.O. Yoke with Spigot
8-leaf barndoor (413 mm/16.3inches)
The 4-leaf barndoor for the S30 allows for control of light spill and narrowing of the beam angle.
Redesigned Cordura soft bag for all artemis spring arms. The new design allows to place the vest around the spring arm soft bag. In this way, an extremely compact transport arm and vest can be achieved. For all artemis spring arms
An IFM filter frame with an optical clear - to be used when no ND attenuation is desired (shim must be present).
12V High Capacity extension cable to connect a block battery with the SRH High Capacity Battery Power Cable, 12V/24V, 0.5m/1.64ft (K2.0019306) 12V High Capacity, 4pin XLR, Length: 20m/66ft For SRH-3 and SRH-360
24V High Capacity extension cable to connect a block battery with the SRH High Capacity Battery Power Cable, 12V/24V, 0.5m/1.64ft (K2.0019306) 24V High Capacity, 3pin XLR, Length: 20m/66ft For SRH-3 and SRH-360
Connects Universal Motor Controller CAM connector to Sony F65. Provides camera RUN/STOP function. Length: 0.5m/1.6ft. Separate UMC-4 RS IN cable for power supply required.
Smart Iris Ring Set (5x)
Connects ARRI cforce RF motor/cmotion cPRO motor and camin to the EXT connector of an ALEXA EV camera. Provides camera RUN/STOP function, tally and camera status information on ARRI and cmotion hand units. Length: 0,8m/2.6ft
Connects LBUS devices (e.g. Master Grips and cforce motors). Includes one angled LBUS connector. Length: 1m/3.3ft
A follow focus gear with the 0.8 module used with cine lenses, optimized with 35 teeth for prime lenses, extra width of 45mm for zoom lenses with large barrels or lenses with extending element when pulling focus.
Connects ARRI cforce RF motor/cmotion cPRO motor and camin to 12 pin Hirose lens connectors. Requires separate power source. Length: 0.3m/1ft
For use of Flexible Shaft orFocus Lever without Focus Knob. With FF-3 - can be mounted right side - with FF-4 or FF5-HD - can be mounted leftor right side.
LBUS cable (Le 4p, Le 4p). Length: 15m/49ft.
Still Lens Clamp-On Set Basic for still photo lens threads. Includes: K2.66137.0 1x Still Lens Clamp-On Ring 72; K2.66136.0 1x Still Lens Clamp-On Ring 77; K2.66139.0 1x Still Lens Clamp-On Ring 82.
The ARS-3 Cube Set combine: K2.0033852 1x Accessory Rail Cube ARC-1; K2.0034278 1x Accessory Rail Small ARS-3
Connects Cine Tape Measure to ALEXA EXT connector. Length: 1,50 m/5 ft.
Connects LCUBE CUB-1 SERIAL connector to LANC connectors (e.g. Canon C300/500). Length: 0.4 m/1.3ft
CLM-4 gear assembly with 48 pitch - 75 teeth - For Panavision zoom.
Light Protection Ring Set Basic. Includes: K2.66153.0 1x Connection Ring Flexible 72; K2.66151.0 1x Connection Ring flexible 77; K2.66155.0 1x Connection Ring flexible 82; K2.66161.0 1x Flexible Light Protection.
The bracket for Zacuto Gratical EVF electronic viewfinder provides a design-specific interface to the traditional ARRI viewfinder support.
Connects Universal Motor Controllers to AMIRA EXT connector.
Could be mounted on front and back of Adapter Plate for Epic/Scarlet or can beused for the Cage System. This rod console also can beused for several adapterplates.
The SnapGrid for the S30 by DoP Choice attaches directly to the front of the SkyPanel and provides for directional light control.
Set of Rosetts for Broadcast Sony/ULB-4. Includes: K2.47639.0 2x Rosette for Broadcast Plate ULB-4
Speed ring circular (9190)
Speed ring circular (9192)
CLM-4 Rod-to-Rod Adapter Bridge 15mm - 15mm rod-to-rod adapter that attaches to CLM-4 motor.
35 tooth - 0.8Metric Module Gear for external Focus Lenses - 25mm face.
64 tooth - 6mm face - 0.6 Metric Module Gear for Fujinon ENG Lenses - 6mm face.
Connects RS connector on camera side to RS IN connector on UMC-4. Provides power supply and camera RUN/STOP function.
Connects LBUS devices (e.g. Master Grips and cforce motors). Includes one angled LBUS connector. Length: 0.80m/2.6ft
Connects AMIRA and ALEXA Mini EXT to LBUS devices (e.g. Master Grips). Includes one angled LBUS connector. Length: 0.8m/2.6ft
Connects LBUS devices (e.g. Master Grips) with LCS devices (e.g. ALEXA Plus/Studio cameras). Length: 0.80m/2.6ft
Connects LBUS devices (e.g. Master Grips and cforce motors). Includes one angled LBUS connector. Length: 0.35m/1.1ft
This ARRI Side Bracket is for the left side of your Sony BURANO.
This ARRI RA-7 Rosette Adapter attaches to your ZMU-4 Zoom Control Unit to mount handgrip accessories.
Additional counterweight for the TRINITY Gen.1. The bracket is mounted at the bottom of the outer ring of the TRINITY Gen.1 and allows 25, 50, 75 grams of extra weight to be attached. This additional counterweight gives the TRINITY Gen. 1 a much better "drop down" behavior when the TRINITY is in the horizontal plane.
Compatible with the Top Plate for Sony Venice 1/2 and Plate for Sony Venice 1/2. Not compatible with Top Plate for Sony Venice and Plate for Sony Venice. The side bracket has been adapted in order to fit the geometry and controls of the camera. It offers 3/8"-16, 1/4-20, and M4 interfaces to fit with RMB-3, RMB-8, and RA-6.
Tooth - 0.5 Metric Module Gear - Wide Face - for Canon & Angenieux ENG Lenses requiring wider focus gear - for Follow Focus MFF-1 & FF5-HD - 10mm face - for Lenses requiring wider focus gear.
This ARRI Side Bracket is for the right side of your Sony BURANO.
A set of 5 hard mattes with different anamorphic openings that can be clicked into the sunshade of the LMB 6x6 to prevent image quality loss caused by stray light.
The BGA-2 adapter comes with a ARRI Rosette and offers the possibility to securelyattach common bicycle grips with a standard inner diameter of 22 mm/ 0.87" and alength of up to 136 mm. This allows you to choose the material and ergometry of the handle according to your own requirements. A counter screw at the rear end prevents the bicycle handle from...
Filter orients horizontally when inserted from above.
F4 Filter Frame Combo 4x5,65/5x5 - For use with MB-29
F5 Filter Frame Combo 5.65x5.65/ 5x6 H - Accepts 5.65x5.65 filter or 5x6 filter horizontally (5x5.6 filter orients horizontally when inserted from above).
The Tilt and Flex Adapter is a flexible rubber donut compatible with lens diameters from above 80mm to less than 156mm.
A set of 5 hard mattes with different spherical openings that can be clicked into the sunshade of the LMB 6x6 to prevent image quality loss caused by stray light.
Compatible with Sony Venice 1/2. The Plate comes with two integrated 15mm lightweight supports (at the front and the back) and is compatible with the BPA-5 (K2.0017138) and the BSA-1 (K2.0043749). This plate offers a pair of M4 threads on each side to attach the side brackets left and right.
Attaches to the ALEXA Center Camera Handle(CCH-1) or any 3/8-16 UNC threaded mounting point. When attached to the front of the Center Camera Handle (CCH-1) - the tape hook is excatly in the sensor plane. Includes 3x 3/8-16 UNC threaded mounting points.
Single rod bracket for 19mm rods (15mm rods with supplied insert) mounting to AMIRA body (top/right). Optimized for camera stabilizer systems and lens motors. Compatible with original AMIRA handle and viewfinder bracket. Includes: K2.0013007 1x Rod Mounting Bracket RMB-4; K2.66255.0 1x 15 mm Reduction Insert
The CCH-4 is a completely closed top handle and is compatible to most of the ARRI PCA top plates. Numerous of interfaces (1/4-20; 3/8-16; M4) for additional accessories (e.g. RMB-3) are integrated
The Rod Mounting Bracket RMB-6 expands camera set-ups opportunities by offering strong support to rod-mounted camera accessories such as lens motors, image transmitters or ultrasonic distance devices.
Weight-optimized side bracket to increases stability and protects the camera.
The side bracket has been adapted to the geometry and controls of the camera. It offers additional stability, additional 3/8" interfaces and a RA-6 interface.
Universal Steel Stand LS.5 (126A)
Conversion Kit from AS40 to M40: MAX Reflector, three brackets and one top latch
Lamp HMI 800 W/SEL G22 HR UV (Osram)
ARRI´s Unit Bag Small II can be used as hand luggage in airplanes. You can put any extra bits and pieces in the three differently size exterior pockets, or in the included three removable accessory pouches
This foldable sunhood for the Camera Control Monitor CCM-1 can be mounted to the CCM-1 without any tools, the side flaps and the top flap hold together magnetically. The outside material is strong and durable, the inside microfiber material protects the display and prevents reflections. The sunhood protects the display of the CCM-1 even when folded.
The Bracket attaches the AU-EVA1 Monitor via 15mm LWS rods and a monitor mount
Connects ARRI cforce RF motor/cmotion cPRO motor and camin to D-Tap power source. Length: 0.5m/1.6ft
LBUS power cable to D-Tap (Le 4p, Anton Bauer 2p). Length: 1.2m/4ft.
LBUS power cable to XLR 4 pin (Le 4p, XLR 4p). Length: 0.8m/2.5ft.
LBUS power cable to D-Tap (Le 4p, Anton Bauer 2p). Length: 1.2m/4ft.
LBUS cable (Le 4p, Le 4p). Length: 6m/20ft.
Connects Universal Motor Controllers to Cooke S4i lenses. Length: 0,7m/2.3ft
64 tooth - 0.6Metric Module Gear - Wide Face - for Fujinon ENG Lenses - 10mm face - for Lenses requiring wider focus gear.
Tooth - 0.5 Metric Module Gear for Canon & Angenieux ENG Lenses - 6mm face for Follow Focus MFF-1 & FF5-HD - 6mm face
The Side Bracket Left has been adapted to the geometry and controls of the camera. It offers additional stability and interfaces such as 3/8 inch, 1/4 inch and RMB-3. It is compatible with the rosette adapters RA-6.
The Side Bracket Right has been adapted to the geometry and controls of the camera. It offers additional stability and interfaces such as 3/8 inch, 1/4 inch, RMB-3 and for the Canon Microphone bracket. It is compatible with the rosette adapters RA-6.
To mount the Smart APU power Supply from top-mounted 15mm LWS rods, with a slight angle.
Viewfinder Bracket for Sony Viewfinder DVF-EL200 (Venice). It is compatible with ARRI's viewfinder mounting bracket MVB-1.
The view?nder bracket for DSMC2 RED EVF (OLED) allows the view?nder to be attached to a camera via a classic ARRI viewfinder mount, such as the Mini Viewfinder Bracket MVB-1
For use in MB-19 rear stage. Filter orients vertically when inserted from above.
The view?nder bracket for BOMB EVF (LCOS) allows the view?nder to be attached to a camera via a classic ARRI viewfinder mount, such as the Mini Viewfinder Bracket MVB-1
This bracket is designed to optimise handheld camera operating when using a compact baseplate such as the ALEXA Mini Adapter Plate MAP-2. For use with bridge plate adapter BPA-4 and most standard 15 mm LWS aseplates for third party cameras, the original CSP-1 rod bracket is required.
Connects the EXT socket (Fischer 16 pin) on the ALEXA or ALEXA XT family of cameras to the EXT socket on another ALEXA and ALEXA XT camera in order to synchronize sensor readout and HD output clocks for 3D and other applications where precise synchronization of two cameras is needed.
Connects Universal Motor Controller UMC-4 to RED Epic. Provides camera RUN/STOP function and tally. Length: 0.5m/1.6ft. Separate UMC-4 RS IN cable for power supply required.
Connects the BAT AMIRA power input to a battery power output with an XLR 3 pin connector.
Filter orients vertically when inserted from above.
Pro Cine Set for Canon C300 MkII. Includes: K2.0006864 1x Cine Plate for C300 MkII; K2.66252.0 1x Support Rods 340mm/9.4in, diameter15mm; K2.0006807 1x Shoulder Pad CSP-1; K2.0006859 1x Top Plate C300 MkIIK2.73002.0 1x Center Camera Handle CCH-2; K2.54077.0 1x 3/8in Accessory Adapter, 18, 65mm square.
Traditional film-style 4x5.65 filter frame withlight shielding all around filter (filter orients horizontally when inserted from above).
F5 Filter Frame 4x6 V - Filter orients vertically when inserted from above.
R7 Clamp-On Ring 130-98 mm
Attaches to the ALEXA M and ALEXA XT Mhead or Top Adapter Plate for Sony F-5/F-55 and provides numerous 3/8-16 UNC threaded mounting points for accessory mounting.
Attaches via 3/8 UNC thread with two locating pins for stability. For use with Arri 18,65mm shoe-mounted accessories.With 435 - attaches to camera carrying handle - the handle must have locating pin holes. Not for 16SR3 or 535.
The Viewfinder Bracket for VariCam is attached to the camera viewfinder in place of the original quick release mechanism. This allows compatibility between the VariCam electronic viewfinder and classic ARRI mounts such as the Mini Viewfinder Bracket MVB-1. Compatible with VariCam LT & VariCam 35/HS
This bracket connects the Canon Monitor Unit to thetraditional ARRI viewfinder mount, in order to benefit from the same ease of repositioning as a traditional electronic viewfinder.
Offers protection and the possibility to attach accessories
Set of 4 scrims (495 mm/19.5inches)
8-leaf barndoor TRUE BLUE (245 mm/9.7inches)
Single rod bracket for 19mm rods (15mm rods with optional insert) mounting to AMIRA body (top/right). Optimized for camera stabilizer systems and lens motors. Compatible with original AMIRA handle and viewfinder bracket
The monitor bracket for the Canon C200 LCD replaces the original bracket from Canon. The ARRI PCA monitor bracket is an improved bracket to fit with viewfinder mounting bracket MVB-1
The Vertical Format Adapters allow the ALEXA Mini/Mini LF to be used with the sensor vertical, 9/16 format. All ARRI baseplates for ALEXA Mini/ Mini LF can be used in that configuration, including the Compact Bridge Plate CBP-1 and CBP-2.
The MSB-3 is a side bracket designed around the on-board recorder of the ALEXA Mini LF and the new viewfinder connector (Camera left).
The BAP-2A is a side mounted battery plate offering compatibility to the Compact Bridge Plates CBP-1 and CBP-2. The BAP-2A features mounting interfaces to common battery plates, including ARRI Power Splitting Box and Bebob AMICRO and VMICRO
35 tooth - 32 pitch Module Gear for Panavision Lenses - 10mm face.
Connects SMC-1 and EMC-1 motor controllers to Arri RS connector. Provides camera RUN/STOP and tally function. Works with ALEXA and AMIRA cameras.
Cable LCS to LCS (3,5m/11ft) - Connects hand unit and motor controller for wired operation.
Cable LCS to LCS (spiral) - Connects hand unit and motor controller for wired operation.
Power and data cable to connect the RCP-3 remote control to the TRINITY2 system. Fischer 4pin to Fischer 4pin, 25cm/10in. TRINITY 2, RCP-3
Connects SMC-1 and EMC-1 motor controllers to Sony F5/55 camera. Provides camera RUN/STOP function.
CLM-4 Gear Set with modules 0.8 - 0.6 - 0.5 - 0.4 - Set of gear rings including one metal gear flange.
CLM-5/cforce mini Gear 48p, 60t for Panavision zoom.
LBUS power cable to Fischer 3 pin (Le f4p, Fi m3p). Length: 0.8m/2.5ft.
Marking Disk, Flat, Set 10x for Standard or 2-speed Focus Knobs, Wireless Compact Unit WCU-3. Includes: K2.32701.0 10x Marking Disk, Flat
Connects CAM connector of Radio Interface Adapter RIA-1, cforce mini RF, cmotion cPRO motor and cmotion camin to LCS connector of ARRI ALEXA Plus type cameras. Provides camera REC start/stop, tally, camera setting and status information via Hi-5 hand unit and cmotion cPRO hand unit (license required). Length: 0.8m/2.6ft.
Connects Universal Motor Controller CAM connector to Sony F5/F55/Venice and Panasonic Varicam 35 cameras. Provides camera RUN/STOP function and tally. Length: 0.5m/1.6ft Separate UMC-4 RS IN cable for power supply required.
Power cable for the Transvideo Starlite monitor used with the TRINITY 2 pin Lemo 0B straight plug. TRINITY Backup Cable
Cage side bracked for accessory interfaces featuring sturdy Arri rosettes and 1/4-20" and 3/8-16" mounting points. Requires MAP-1 or MAP-2 mounted on top and on bottom of the camera body.
24V high capacity camera power cable. Lemo 2B 7pin to Fischer 2pin, 0.7m/2.3ft. For ARTEMIS 2 and TRINITY 2 only!
The Side Accessory Bracket fits to the Mini Adapter plates MAP-1 and MAP-2, as well as the Broadcast Plate for ALEXA Mini and Compact Bridge Plate CBP-1. The SAB-1 provides standard ARRI 3/8 and ? accessories interfaces, as well as attachment points for the Rod Mounting Bracket RMB-3 and Mini Side Brackets MSB-1
For LMB 6x6 and LMB-6, 160 gr, 200x200x10 mm
Attaches to the Center Camera Handle (CCH-1) or any 3/8-16 UNC threaded mounting point. When attached to the front of the Center Camera Handle (CCH-1) - the tape hook is excatly in the sensor plane. Includes 3x 3/8-16 UNC threaded mounting points.
For LMB 6x6 and LMB-6, 183 gr, 200x200x10 mm
ARS-2 Cube Set combines: K2.0033852 1x Accessory Rail Cube ARC-1; K2.0034009 1x Accessory Rail Small ARS-2
Connects EMC-1 to 20 pin connector on Fujinon ZK lenses. Additional power cable required. Length: 0.5m/1.6ft.
1,5m (59 inch) cable to connect ALEXA Mini to CCP-1. This cable has an ALEXA Mini EVF connector on both ends and does not work with AMIRA.
Connects Universal Motor Controller UMC-4 (from SUP1.2) to cforce lens motors. Length: 0.8m/2.6ft. Note: Requires motor power supply through the unused cforce motor LBUS connector (e.g. with K2.0006758 Cable LBUS to D-Tap).
for all 6.6x6.6 frames - fits horiz. or vert.into 6.6x6.6 frames frames and reduces down to be used with 4x5.65 filters
F5 Filter Frame 4x5.65 for 16x9 Wide-Angle - For MB-20 16x9 Wide only
Screws into R1 or R2 138mm round filter rings and reduces to 4.5 round. Includes threaded retaining ring for 4.5 round. Not for use with 6 filter rings.
For LMB 6x6 and LMB-6, 196 gr, 200x200x10 mm
For LMB 6x6 and LMB-6, 188 gr, 200x200x10 mm
For LMB 6x6 and LMB-6, 180 gr, 200x200x10 mm
With the UAP-1 the camera can be quickly moved froma traditional Arri cine-style bridge plate (including BP-3 - 5 - 8 or 9) to a Steadicam dove tail plate. It attaches to the front and back foot of ALEXA - ALEXA Plus - ALEXA Plus 4:3 - ALEXA M body - ALEXA XT - ALEXA XT M body or ALEXA XT Plus with a tight and secure fit.
For LMB 6x6 and LMB-6, 170 gr, 200x200x10 mm
For LMB 6x6 and LMB-6, 162 gr, 200x200x10 mm
For LMB 6x6 and LMB-6. Fits all R12 clamp-on reduction rings (please see ring section)
For LMB 6x6 and LMB-6. The Adapter is available for the Angenieux Optimo 24-290 and 28-340.
The diopter adapter is compatible with LMB 6x6 Diopter Stage and Diopter Frame 6 inch and allows the use of 138 mm close-up diopters.
Works with ARRI standard R2 rings when either the LMB 15mm or 19mm Studio Rod Adapter is attached at the bottom of the LMB 6x6 Clamp Adapter 143 mm. Compatible with LMB 6x6 and LMB-6.
Works with ARRI standard R1 rings when either the LMB 15mm or 19mm Studio Rod Adapter is attached at the bottom of the LMB 6x6 Clamp Adapter 165mm. Compatible with LMB 6x6 and LMB-6.
The Cage Top Handle CTH-1 is designed to fit onany single 3/8-16 interface found on the Arri Cage System. Like the ALEXA handle - the CTH-1 offers numerous mounting points in the industry standard 3/8-16 and 1/4-20 thread sizes. The Handle is seamlessly compatible with all three sizes of Arri Handle Extension Brackets HEB-1 - HEB-2and HEB-3.
Attaches to the Center Camera Handle (CCH-1) or any 3/8-16 UNC threaded mounting point. When attached to the front of the Center Camera Handle (CCH-1) - the tape hook is excatly in the sensor plane. Includes 3x 3/8-16 UNC threaded mounting points.
The viewfinder bracket for the Canon EVF viewfinders replaces the original bracket from Canon mounted on their viewfinders. The ARRI PCA viewfinder bracket is an improved bracket to fit with our viewfinder mounting bracket MVB-1