Eizo DuraVision FDS1901 - 19 inch LCD Black



The Eizo DuraVision FDS1901 is a 19" monitor for security and surveillance. It features...
Lire la suite
Prix constructeur :
871,87 CHF HT

Prix Visuals :

828,28 CHF


Délai habituel entre 1 et 2 semaines

- +

En savoir plus  

Specialized solutions with a guaranteed delivery date and professional technical support

All EIZO monitors are designed, manufactured and tested at the factory in Japan. This provides tailor solutions to the specific needs of consumers, particularly for specialized applications. Additionally, the company Eizo guarantees its customers timely delivery and technical support.

PC and AV inputs

The monitor has an analog D-Sub for PC connection and entry Composite (BNC) video signals that supports NTSC, PAL and SECAM, for connecting eg .: CCTV cameras. In order to reduce interference composite input has a 3-dimensional separation circuit Y / C signal for NTSC, which separates brightness information (Y) from the color information (C).

Display Underscan and Normal mode

The image can be displayed in two modes - Underscan and Normal. Underscan mode is 100% visible image, it is suitable for displaying video. In Normal mode you can see about 95% of the image, thus eliminating irrelevant data contained in the TV signal, which sometimes appear at the edges of the screen.

The possibility of any panel settings

The screen can be set in any position by adjusting the height in the range of 100 mm, rotating in a vertical plane about 30 ° and 70 ° the horizontal. You can also work in portrait position. Compliance with VESA standards means that after removing the panel from the footer, it can be placed on the shoulder or mounted on the wall.

Vivid colors, even when the monitor is above the line of sight

When we look at the monitor at an angle, color saturation changes - the larger the angle, the worse the quality of colors. In places where the monitors are placed over the positions of members, function Up View minimize the loss of color saturation.

Three predefined operating modes

The user can select one of three modes, the most suitable for data lighting conditions. Modes Light and Dark are ideal corresponding to bright or dark rooms. In contrast Dynamic contrast raises within the dark tone, so even small details are clearly visible in low-lit areas.

Remote control

Supplied with the monitor is a remote control. By using it, you can turn on / off, move around the OSD menu, adjust the volume and switch between display modes.


Housing color

Black, Grey




19 "/ 48 cm (481 mm diagonal)

Native resolution

1280 x 1024 (5: 4)

Image size (H x W)

376 x 301 mm

Pixel size

0.294 x 0.294 mm

The number of shades of gray

256 shades (from a palette of 1021)

Number of colors

16.77 million from a palette of 1.06 billion

Viewing angles (vertical / horizontal)

170 °, 170 °


400 cd / m²


1000: 1

Response time (typical)

5 ms (black-white-black)

Video Signal


Signal inputs

PC mini D-Sub 15 pin x 1 AV: BNC (Composite) x 1

Analog refresh rate

24.8 - 74.8 kHz, 56.2 - 75.1 Hz




0.3 W + 0.3 W


3.5 RCA x 1



Power Supply

AC 100 - 120 V / 200 - 240 V, 50/60 Hz

The maximum power consumption


In energy saving mode

Less than 8W

Additional features



PC: color settings (brightness, contrast, sharpness, temperature), backlight, DPMS, the OSD menu settings, gamma table, scanning the source, analog RGB calibration, the calibration reset, apekt video, language, reset to factory settings, the test board. 
AV: color settings (brightness, contrast, sharpness, temperature, tint), backlight, DPMS, the OSD menu settings, gamma table, scanning the source, apekt video, language, reset to factory settings, the test board.

Physical Specification


Size (L x W x D)

405 x 406.5 - 506.5 x 205 mm

Size without foot (L x W x D)

405 x 334 x 61.5 mm


7.2 kg

Weight without foot

5.2 kg

Height adjustment

100 mm


30 ° Up, 0 ° Down


35 ° right, 35 ° left



Environmental requirements



0 - 35 ° C


20 - 80%

Certifications and Standards

C-Tick, CE, CB, cTUVus, FCC-A Canadian ICES-003-A, TUV / S, VCCI-A, RoHS, WEEE, CCC, GOST-R


    Besoin d'aide,
    Besoin d'un financement,
    Appellez-nous !

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11