For professionals and enthusiasts alike.
Sony DWR-S03D/H - DWX Series Gen3 Slot-in Receiver
The DWR-S03D is the newest addition to Sony's DWX Generation 3 series offering a compact receiver perfect for all ENG/EFP applications.
Now compatible with UniSlot, this 2-channel portable receiver can be mounted onto a selection of camcorders using the new DWA-SLAS1 or DWA-SLAU1 interface adaptor.
Operating on a bandwidth of up to 148 MHz, and with automatic channel scan and sync, the DWR-S03D has the ability to find clear and unoccupied frequencies quickly and in the busiest of areas.
DWX Series Gen3 Slot-In Receiver 566.025MHz to 714.000 MHz.
Features
Superb quality wireless transmission and reception
Sony’s years of experience in engineering audio products give us great features such as a dynamic range of more than 106db. Along with a frequency response of 20-22kHz and excellent transient response we can happily say that this is the best sounding digital system going.
Flexible interface
A selection of adapters are available allowing for use with Sony and other manufacturers.
DWA-SLAS1: for Sony camcorders, DWA-01D and DWA-F01D
DWA-SLAU1: for the products with UniSlot
Wide bandwidth
Up to 148 MHz bandwidth (depending on region) enables flexible operation with wide channel selection.
Automatic channel scan and sync function
By simply holding down the Menu select and set button, the DWR-S03D will go into channel scan and sync function. This will automatically scan for clear channels, and then allocate best two to both channels on the receiver, this can then be pushed to both transmitters via Cross Remote.
Stable RF transmissions
The Sony DWX range uses something called Sony X-Dimension Diversity. Combining the diversity Sony’s advanced digital technology, the diversity of multiple dimensions and lastly algorithms of high calculation accuracy gives you incredibly stable transmission stability.
Innovative Monitor/Control Function, Cross Remote
The DWR-S03D can remotely control transmitter features such as Input attenuation, Audio Low-pass cut-off frequency, RF frequency selection, RF power output, RF frequency selection and Sleep Mode.
Advanced integration with XDCAM shoulder camcorder
The following functions are available when combining the DWR-S03D with the XDCAM Corder.
- Synchronised video and audio latency
- The Camcorders LCD or Viewfinder can monitor wireless audio status
- Via Cross Remote™ certain transmitter parameters can be controlled remotely.
- Transmitters power save can be remotely controlled by the Camcorders assignable switch.
- The Camcorders main power switch can be used to switch the transmitters power save more between active or sleep automatically.
- Applicable Camcorder: PXW-Z450 Ver.3.0～/PXW-X400 Ver.3.2～/PXW-X500 Ver.5.2～/PXW-Z750
Four codec modes designed for wide variety of applications
As per the 2 channel Rack receivers, the DWR-S03D utilises Sony’s excellent codec development, with 4 options to suit a wide range of scenarios.
MODE1: Audio codec mode that is compatible with first-generation DWX-series devices.
MODE2: Audio codec mode that prioritizes short delay times while maintaining transmission stability and high audio quality.
MODE3: Audio codec mode that uses additional signal processing to suppress noise caused by unexpected pulse interference
MODE4: Audio codec mode that prioritizes audio quality for faithful reproduction while maintaining transmission stability and low delay time
Low audio latency and high quality sound
An audio latency of only 1.2msec combines with high quality 96 kHz audio (CODEC MODE2, with DWT-B03R or DWT-B30).
Encrypted transmissions
To minimise the risk of interception the DWR-S03D transmits and receivers digitally encrypted and modulated data. This ensures secure reception and transition with AES 256-bit encryption.
Compact, lightweight, and rugged design
Made of magnesium die-cast and aliuminium this unit is rugged yet light weight for even the harshest of environments.
|
Specifications |
|
Type of Receiver |
Slot-in (2 channels) |
|
Transmission Method |
WiDIF-HP (x2) |
|
Circuit system |
Double superheterodyne |
|
Oscillator type |
Crystal-controlled PLL synthesizer |
|
Reception Type |
True diversity method |
|
RF input terminal |
SMA-R, 50 ohms |
|
Antenna Type |
Detachable |
|
Sensitivity |
20 dBμ or less (at ambient temperature 25 °C (77 °F), bit error rate = 1 x 10 -5, no decline in S/N ratio) |
|
Carrier Frequencies |
UC7 : 470.125 MHz to 607.875 MHz, 614.125 MHz to 615.875 MHz (UHF-TV channels 14 to 36, 38) L/CE7 : 470.025 MHz to 614.000 MHz (UHF-TV channels 21 to 38) H/CE7 : 566.025 MHz to 714.000 MHz (UHF-TV channels 33 to 51) G/J : 1240.150 MHz to 1251.825 MHz, 1253.175 MHz to 1259.850 MHz |
|
Reference output level |
Analog: –40 dBu Digital: –36 dBFS/–20 dBFS (switchable) |
|
Dynamic range |
106 dB or more (A-weighted) |
|
Distortion (T.H.D) |
MODE1, MODE2, MODE4: 0.03% or less MODE3: 0.3% or less |
|
Audio delay |
Analog output in combination with the DWA-01D/F01D; MODE1: 2.1 msec, MODE2: 1.7 msec, MODE3: 3.0 msec, MODE4: 1.7 msec ABS/EBU output in combination with the DWA-01D/F01D; MODE1: 1.9 msec, MODE2: 1.5 msec, MODE3: 2.8 msec, MODE4: 1.5 msec Through a digital connection with a camcorder; MODE1: 1.9 msec, MODE2: 1.3 msec, MODE3: 2.7 msec, MODE4: 1.4 msec |
|
Audio output connector |
D-sub 15 pin (male) (x1) with optional adaptor DWA-SLAS1 D-sub 25 pin (male) (x1) with optional adaptor DWA-SLAU1 |
|
Display |
OLED |
|
Operating voltage |
DC 6 V to 18 V |
|
Consumption current |
3.5 W or less with optional adaptor DWA-SLAS1 4.0 W or less with optional adaptor DWA-SLAU1 |
|
Operating Temperature |
0 °C to 50 °C (32 °F to 122 °F) |
|
Storage Temperature |
–20 °C to +60 °C (–4 °F to +140 °F) |
|
Wireless remote control |
2.4- GHz IEEE802.15.4 compliant |
|
Dimensions |
Approx. 88 x 119 x 32 mm (3 1/2 x 4 3/4 x 1 5/16 in) (W / H / D) (excluding antennas) with optional adaptor DWA-SLAS1 Approx. 74 x 119 x 31 mm (3 x 4 3/4 x 1 1/4 in) (W / H / D) (excluding antennas) with optional adaptor DWA-SLAU1 |
|
Mass |
Approx. 193g with optional adaptor DWA-SLAS1 (including antennas) Approx. 196g with optional adaptor DWA-SLAU1 (including antennas) |
-
Need help,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Need financing,
Call us!
