WP-789R is a high-performance, long-reach HDBaseT wall-plate receiver for 4K@60Hz (4:2:0) HDMI and HDCP 2.2 signals over twisted pair.
USB type-C cable retractor for data, video, and charging
High-Speed HDMI 4K cable retractor with PT-3H2 signal extender
Round Table Connection Bus for Power Socket , USB Charging and Cable PassThroughs
Round Table Connection Bus - Sand-blasted Anodized Aluminum Top - Black
Round Table Connection Bus - Sand-blasted Anodized Aluminum Top - Silver
CAT 6 cable retractor with RJ-45 connector
USB 3.0 cable retractor with USB type-A connector
VGA cable retractor with VGA connector
Audio cable retractor with 3.5mm mini jack connector
DisplayPort cable retractor with DisplayPort connector
High-speed HDMI with Ethernet cable retractor with HDMI connector
The Sonifex CM-TC1 is a Commentator Unit Transport Case which can be used with the AVN-CU4-Dante. It can also be used with the CM-CU1 and CM-CU21 commentator units.
Podium Table Bus with Decora Wall-Plate and Inserts
TBUS-1-KWC adaptor for smart phones Wireless charger
TBUS-1-KWC adaptor for smart phones Wireless charger
The CM-TC2 is a Transport Case which can be used with anything you wish. The foam has push out blocks to make the cut out shape you require.
Round Table Mount 4 Cable Pass-Through - Black, Sand-blasted Anodized Aluminum Top
Round Table Mount 4 Cable Pass-Through - Silver, Sand-blasted Anodized Aluminum Top
TBUS Dual socket module with 1 Universal AC power socket and 2 USB charging ports
Two 5V DC USB Power Outlets - Provide up to 20W/4A of total power (shared between the two connectors) for charging mobile devices such as smartphones and tablets.
Two 5V DC USB Power Outlets - Provide up to 20W/4A of total power (shared between the two connectors) for charging mobile devices such as smartphones and tablets.
2 USB Charging in a power bracket module
Inner Frame for TBUS20XL (WAVES)
HDMI, 3.5mm Audio & USB-B Passive Wall Plate (White)
Computer Graphics Video, HDMI & Stereo Audio Passive Wall Plate. WXA-H-D model supplied with DECORA design frame.
Frame - Plastic for Wall Plate Inserts - 1 Gang
Frame - Plastic for Wall Plate Inserts - 1 Gang
Frame - Plastic for Wall Plate Inserts - 1 Gang black
The AMS-HR6 is a mounting panel that allows you to mount up to 6 AMS-series accessories in a standard equipment rack. These accessories include switches, controls, indicators, and jacks.
FLF1 black, with push switch, illuminated, Off / AC, 10A, 230VAC
Mounting Panel for Four AMS Accessories
The Kramer OWB-3G 3 Gang On-Wall Box is a white plastic box that is used for installing a single 3 gang US wall plate (such as the WP-500). The box is mounted on the wall for applications where in-wall installation is not possible in US and non-US installations.
Dual Gang On Wall Box
3.5mm Audio Passive Wall Plate (White)
The On-Wall Box (Decora) is a white plastic box for installing a single 1 or 2 gang Decora wall plate. The box is mounted on the wall for applications where in-wall installation is not possible.
The On-Wall Box (EU) is a white plastic box for installing a single 1 or 2 gang European wall plate. The box is mounted on the wall for applications where in-wall installation is not possible.
Frame for Wall Plate Inserts - 2 Gang
Frame For Wall Plate Inserts - 2 Gang
The black DB-MJPT Mini-Jack Pass-Through Plate from RDL is a Decora style wall plate with a mini-jack input or output connector. It allows for quick installations of audio signals (such as computer or portable media player) via a mini-jack connection. The panel is suitable for mounting on a wall or in an RDL DC-1 Decora style countertop chassis.
A bracket for installing two inserts in a power socket opening.
TBUS Bracket to Install Four Inserts in a Dual Power Socket Opening
Bracket for 1Gang Decora
Panel for installing RC-8IR in TBUS-1A inner frame
Wall Plate Insert - HDMI
Wall Plate Insert - HDMI
Stereo Audio Wall Plate Insert
Wall Plate Insert - HDMI
Dual Ethernet Wall Plate Insert
Stereo Audio Wall Plate Insert
Dual Ethernet Wall Plate Insert
Stereo Audio Wall Plate Insert
Dual Ethernet Wall Plate Insert
Wall Plate Insert - RJ-45
G4K AC/DC Power Adapter
The On-Wall Box (Decora) is a white plastic box for installing a single 1 or 2 gang Decora wall plate. The box is mounted on the wall for applications where in-wall installation is not possible.
The On-Wall Box (EU) is a white plastic box for installing a single 1 or 2 gang European wall plate. The box is mounted on the wall for applications where in-wall installation is not possible.
Single Gang On Wall Box
KRT-4-M1 is a bracket for mounting KRT-4 cable retractor on the underside of a table.
Wall Plate Insert - DisplayPort
Wall Plate Insert - DisplayPort
Wall Plate Insert - DisplayPort
Wall Plate Insert - 3.5mm Stereo Audio & RJ-45
Wall Plate Insert - 3.5mm Stereo Audio & RJ-45
Wall Plate Insert - XLR (F)
Wall Plate Insert - DVI
Wall Plate Insert - XLR (F)
Wall Plate Insert - XLR (F)
Frame for Wall Plate Inserts - 1 Gang
Frame for Wall Plate Inserts - 1 Gang
Black Frame and Faceplate Set for Wall Plate
Black Frame and Faceplate Set for WP-789R Wall Plate
Wall Plate Insert - Two-Sized Cable Pass-Through
Mounting Plate-Set EDIZIOdue, plastic with connector plate; black, 88 x 88 mm
AMS is an accessory mounting system for jacks, indicators, switches and controls.
LF mounting plate black, with metal clamps, cutout for 1x D-Series versions, without plug. This mounting plate is supplied with screws and lock nuts.
Wall Plate Insert - Cable Pass-Through
Two-Sized Cable Pass-Through Wall Plate Insert
Wall Plate Insert - Cable Pass-Through
Dual Cable Pass-Through Wall Plate Insert.
Einsatz für Wandanschlussfeld - Doppelte Kabeldurchführung
Wall Plate Insert - Dual Cable Pass-Through - Gray
Wall Plate Insert - Dual Cable Pass-Through - White
Wall Plate Insert -Cable Pass-Through
Wall Plate Insert - Dual Cable Pass-Through - White
Mounting Plate-Set EDIZIOdue, plastic with connector plate; white, 88 x 88 mm
The AMS-PJ1 Power Jack Assembly is an accessory port for solder blocks; it allows 24VDC power supplies equipped with jacks to be included in your system. The port is specially designed to fit RDL's AMS-UF1 Universal Frame, an accessory mounting system for RACK-UP mounting bays.
The AMS-1RC Single Phono Jack is an accessory port for solder blocks. The jack is specially designed allow unbalanced audio or video jacks to fit into RDL's AMS-UF1 Universal Frame, an accessory mounting system for RACK-UP mounting bays.
TBUS-1A Blank for IF/1XPS/1&3XTOOL(P/N:80-005299&80-005199)
The AMS-LEDY Yellow LED Indicator is suitable for use with AMS mounts.
The AMS-LEDR Red LED Indicator is suitable for use with AMS mounts.
The AMS-LEDG Green LED Indicator is suitable for use with AMS mounts.
The AMS-LEDB Blue LED Indicator is suitable for use with AMS mounts.
For use with RDL SMB-3 and DC-3 for mounting RDL remote controls and jack panels.
For use with RDL SMB-2, DC-2 and WB2U for mounting RDL remote controls and jack panels.
For use with RDL SMB-2, DC-2 and WB2U for mounting RDL remote controls and jack panels.
For use with RDL SMB-2, DC-2 and WB2U for mounting RDL remote controls and jack panels.
The AV-AC2 Cable Kit is a pair of dual 1/8" phono-to-stereo mini-plugs. The kit includes two adapter cables, and is ideal for replacing the AV-AC2 included with RDL's AV-PAK audio isolation module.
For use with RDL SMB-1, DC-1 and WB-1U for mounting RDL remote controls and jack panels.
For use with RDL SMB-1, DC-1 and WB-1U for mounting RDL remote controls and jack panels.
FLF single socket white, Type 13, 10A, 250VAC, with screw clamps
FLF single socket black, Type 13, 10A, 250VAC, with screw clamps
The AMS-BNC Video Jack Assembly is an accessory port for solder terminals. The sturdy port allows video connections to fit into RDL's AMS-UF1 Universal Frame, an accessory mounting system for RACK-UP mounting bays.
Keystone insert for FLF. Black USB A female / A female receptacle 3.0.
white FLF mounting plate with plastic clips, cut out for 2 x Keystone inserts, including Labeling strips, unequipped
The D-Blank D-Style Plate Without Jack or Cut-Out is D-style connector plate that has no jack or pre-cut hole. Use this unit for custom installation work that requires a blank connector plate to meet your exact needs. The plate can be mounted in WB-1U and WB-2U Universal Wall Boxes.
Black FLF mounting plate with plastic clips, cut out for 2 x Keystone inserts, including Labeling strips, unequipped
Wall Plate Insert - Double Blank Slot Cover Plate
TBUS AC Power Cord Dual Outputs - Right-Angle Europe 6ft 220V AC
The AMS-FP1 Filler Plate is an accessory port for RDL's AMS-UF1 Universal frame, a RACK-UP mounting system. The filler plate simply and safely covers ports that will not be used within the frame.
FLF dummy plate black with metal clamps
Keystone insert for 1x RJ45 Cat.6 female/female receptacle, screened
Wall Plate Insert Slot
Wall Plate Insert Slot
Wall Plate Insert Slot
TBUS AC Power Cord - Right-Angle Europe 6ft 220V AC
FLF dummy plate white with metal clamps
Grey FLF wall box made of plastic (dimensions: 47 x 36 x 58 mm). This part is used as rear cover for FLF mounting plates e.g. mounted in our FLF panels.
Keystone 1x dummy cover, white
Keystone 1x dummy cover, black