Lightweight Plate For Sony Fs7. Designed To Marry The Sony Fs7 Shoulder Pad.
1 pieces in stock
Gimbal Handle Bar Bracket (V-Mount)
1 pieces in stock
Bottom Dove-Tail Plate 300mm 12"
2 pieces in stock
Vocas Handgrip kit, including a 15mm rail bracket
1 pieces in stock
Tiltaing Advanced Side Wooden Handle Type VIII - Black (One Pair)
2 pieces in stock
Wooden Camera - Dovetail Clamp
1 pieces in stock
The Battery Slide Pro V-Mount for Sony FX9 from Wooden Camera attaches to the rear of the camera and supports a V-mount battery while leaving access to the camera's standard battery compartment.
4 pieces in stock
WC Pro V-Mount (3x D-Tap)
1 pieces in stock
Nucleus-M Handle Bridge (15/15mm)
2 pieces in stock
Battery extender and hand grip for Blackmagic Pocket Cinema Camera 6K Pro lets you shoot continuously for over 3 hours!
1 pieces in stock
Top Handle V2 (2" Slotted Screw Channel).
3 pieces in stock
SmallRig Shoulder Rig Handle Kit 2002 attaches 15mm rods for shoulder-mount shooting. The shoulder rig handle kit comes with independent anti-slip handles utilizing SmallRig rosettes.
1 pieces in stock
Canon C-Series Handgrip Extension Cable
2 pieces in stock
Wooden Camera - 15mm Tube Clamp
4 pieces in stock
Touch and Go Plate Only (120mm Oconnor Euro, Sacthler 35, Ronford Baker RBQ Compatible)
1 pieces in stock
URSA V-Mount Plate
1 pieces in stock
Universal Shoulder Pad
1 pieces in stock
Wooden Camera - Easy Plate XL
2 pieces in stock
Wooden Camera - Easy Stick
5 pieces in stock
Top Handle for Camera URSA Mini
2 pieces in stock
Snap-on Quick Lock NATO Side Handle
4 pieces in stock
Director's Monitor Cage v2 Rubber Grip Set of Two (3/8-16 Thread)
10 pieces in stock
WC Super Clamp
20 pieces in stock
Aluminium bracket with additional Cold Shoe Mount. Including: 1x Aluminium Bracket with 1/4 screw; 1x Aluminium Cold Shoe Mount with 4 screws; 1x Allen key for assembly; 1x Slot screwdriver with bottle opener
1 pieces in stock
Ultra Arm Ball (Male Hot Shoe)
6 pieces in stock
The compact Hunter Folding Screwdriver Kit from SmallRig incorporates a variety of fold-out tools useful for videographers. Constructed with stainless steel tools and an aluminum casing, the screwdriver features a rectangular form with a folding, anti-twist design.
8 pieces in stock
Aluminium bracket with integrated Belt Clip Mount, 1x Aluminium Bracket with fastening screw, 1x integrated Belt Clip Mount, 1x 1/4 inch screw for mounting, 1x Slot Screwdriver with bottle opener
4 pieces in stock
Base connection
2 pieces in stock
SmallRig Rosette Arm (11") 3959, made of aircraft-grade aluminum and stainless steel, features 1/4"-20 screws and stretchable pins at both ends for securely attaching such accessories, particularly with anti-twist holes, as monitors, LED lights, microphones, mobile phones, iPads, action cameras, etc.
14 pieces in stock
C-Clamp for table or tubes 80 x 20 x 40 mm
2 pieces in stock
This Level marker attaches to any 1/4" threaded hole. Allowing the user to check for a proper alignment with the camera and the horizon.
4 pieces in stock
Stainless steel rod 19x400mm
1 pieces in stock
Slim and lightweight aluminium bracket with a 1/4 screw. 1x Aluminium Bracket with 1/4 screw; 1x Slot Screwdriver with bottle opener
7 pieces in stock
Add this Arca-Type Quick Release Plate with 15mm Rod Clamp from SmallRig to your camera rig to facilitate using a follow focus without requiring a camera cage.
4 pieces in stock
Universal Clamp for General Rigging Use (1/4 inches-20 & 10-32 holes, 5/8 inches socket) - mounts to Bars or Flat surface
2 pieces in stock
Multi-purpose clamp, M6 thread, 21 mm
1 pieces in stock
Multi-tool (Metric, Imperial, Screwdriver) (3/16 inch, 2.5mm, 3mm, 4mm, T10, T20, #1 Phillips, Flat Head)
26 pieces in stock
Single Handle with 1/4" thread (SH-02)
3 pieces in stock
Sеt соnѕіѕtіng оf thrее ѕmаll соuntеrwеіghtѕ wіth 25 tо 100 grаmѕ аnd а mаtсhіng сlір thаt саn bе аttасhеd tо а DЈ І Rоnіn Ѕ gіmbаl.
4 pieces in stock
Wooden Camera - 1/4-20 Hot Shoe
14 pieces in stock
Hand Wheel Adapter for Zhiyun Crane
1 pieces in stock
Made by CNC machine Fit for 15mm rod 1/4" screw
2 pieces in stock
Magic arm 7 inches
1 pieces in stock
SmallRig Screw Set for Camera Accessories AAK2326 is designed for camera cages, handles, plates and other camera-related accessories.
93 pieces in stock
Expan Chain Stretcher
5 pieces in stock
8-in-1 Universal Snap Ring Pliers Set
4 pieces in stock
Lens Adapter Support for Sigma fp - Black
1 pieces in stock
Aluminium thread stem, extruded plastic body. ? 30 mm (1.2 in.). B 1/4", A 3/8". Pack of two
19 pieces in stock
Full Circle Curved Track Diameter 1020 cm / 33' 12 Pieces
Full Circle Curved Track Diameter 896 cm / 29' 12 Pieces
Full Circle Curved Track Diameter 772 cm / 25' 12 Pieces
Full Circle Curved Track Diameter 648 cm / 21' 12 Pieces
Full Circle Curved Track Diameter 524 cm / 17' 6 Pieces
Full Circle Curved Track Diameter 400 cm / 13' 6 Pieces
Full Circle Curved Track Diameter 276 cm / 9' 6 Pieces
Set includes: K2.0019580 1x, K2.0014630 1x, K2.0006186 1x, K2.0014960 1x, K2.0014961 1x, K2.0014088 1x, K2.0013007 1x, K2.0015896 1x, K2.66255.0 1x, K2.0001016 1x, K2.0001221 1x, K2.0001297 1x, K2.72007.0 1x, K2.0001222 1x, K2.0016648 2x, K2.0024245 1x
Starter Vario motorized column. 1350mm stroke
Usually ships within 6 weeks
A motorized column is a telescopic actuator that uses an electric motor to drive a threaded rod, causing the column to extend or retract. They are commonly used in adjustable desks, sit-stand workstations, ergonomic furniture and other applications requiring height adjustment.
Usually ships within 6 weeks
Starter Simplo motorized column. 675mm stroke
Usually ships within 6 weeks
This FreeStyle Air Max RGB LED Light Panel DMX System Universal Kit from Kino Flo features the 39.5 x 22 x 2" FreeStyle Air Max panel and a compatible 140 LED DMX controller.
Delivery time of 4 to 6 weeks
This support set includes a broadcast-style, VCT-compatible baseplate with shoulder pad and handgrip rosettes, a 15mm LWS bridge plate and adapter, a top cheese plate, a top handle, side plates, a NATO rail clamp, and a 9.4" pair of lightweight 15mm rods.
Canon C500 Mark II baseplate, cage, top handle long VF, 4x5.6 matte box, follow focus pro
Heavy duty handgrip set. The handles offset is adjustable. Can be attached via short extensions and rosette offset brackets directly to the camera native rosette mounts. Triggers run functionality on cameras fitted with 3-pin RS run signals, such as ALEXA Mini, ALEXA, AMIRA and many third party cameras. Includes: 1x K2.0001021; 2x K2.47136.0; 2x K2.47648.0.
The set offers essential support accessories for traditional cine rigging, such as the Compact Bridge Plate 19mm CBP-3 and low mode plate UAP-2. Includes: K2.0019580 1x, K2.0014088 1x, K2.0015896 1x, K2.0001221 1x, K2.0001297 1x, K2.72007.0 1x, K2.0001222 1x
Car Rig Shot Kit
This lightweight set includes a 15mm LWS bridge plate, a BPA-5 adapter plate, a cage, a CCH-4 top handle, a NATO rail clamp, a rod console, an RMB-3 bracket, and a 15mm reducer. Use the included 9.4" pair of 15mm rods to mount a lens support bracket and 15mm rod-based accessories.
Extremely durable and ergonomically formed articulating handgrip for right camera side that attachesto the rosette of any Arri camera. Includes REC button and short built-in cable to RS connector (Fischer 3 pin) and for left camera side without connector. Includes: K4.54521.0 - Articulating Handgrip Right K4.54523.0 - Articulating Handgrip Left
Includes shoulder cushion - left and right grips with run/stop switch via Arri standard RS 3-pin connector.
Includes left and right grips with run/stops witch via Arri standard RS 3-pin connector.
RED DSMC2 Accessory Kit (Pro, 19mm).
Usually ships within 8 to 12 weeks
RED DSMC2 Accessory Kit (Pro, 15mm Studio).
Usually ships within 8 to 12 weeks
Canon C500 Mark II baseplate with handle, cage, follow focus pro
Vacumm Suction Cup W/ Heavy Duty Camera Bracket
Engine
The system includes the Upright Ultra Handle, which is the core of the top handle system and includes one 1" Extension module, one 4" Extension module, two 3" Extension modules, one right-angle Extension module, a 1/4"-20 Support Bracket, a Support Bracket for the KOMODO-X with the RMI extension, and a Color Ring Pack of 24 color rings to insert between...
Usually ships within 8 to 12 weeks
This support set includes a broadcast-style, VCT-compatible baseplate with shoulder pad and handgrip rosettes, a 15mm LWS bridge plate and adapter, a top cheese plate, and a 9.4" pair of lightweight 15mm rods.
SONY FS7M2 BASE PLATE TOP PLATE FOLLOW FOCUS PRO
Camera Car Mount
Wooden Camera 264600 - RED DSMC2 Accessory Kit (Advanced).
Usually ships within 8 to 12 weeks
Telescopic SHAPE Black Handle Arri Rosette Cuffs Kit
Euro to Mitchell 3-way Leveler
Lightweight and durable handgrip set based on ARRI rosettes. Can be attached to 15mm LWS rods.Triggers run functionality on cameras fitted with 3-pin RS run signals, such as ALEXA, AMIRA and many third party cameras. Includes: 1x K2.47861.0; 1x K2.47862.0; 2x K2.47863.0; 1x K2.66275.0; For ALEXA Mini Set up additionally required: 1x K2.0006170
Mitchell 4 Way Leveling Camera Mount With 3/8" Slot-blk
Tilta Float Handheld Gimbal Support System - V Mount
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
With adjustable clamping mechanism. Compatible with Sony V-Lock cameras.
UBS-3 Handgrip Set on/off RS-3pin. Can be attached to 15mm LWS rods as well as 15mm and 19mm studio rod systems. Triggers run functionality on cameras fitted with 3-pin RS run signals, such as ALEXA, AMIRA and many third party cameras. Lightweight and durable handgrip set based on ARRI rosettes. Includes: 1x K2.47861.0; 1x K2.47862.0; 2x K2.47863.0; 1x...
The CBP-5 is a compact and lightweight baseplate that combines the functionalities of a sliding studio bridge plate with a comfortable Visco shoulder pad. The top of the CBP-5 slides into the bottom of the Balance Utility Dovetail BUD-1 and allows for significant balance adjustment.
The CBP-6 is a compact and lightweight baseplate that combines the functionalities of a sliding studio bridge plate with a comfortable Visco shoulder pad. The top of the CBP-6 slides into the bottom of the Balance Utility Dovetail BUD-1 and allows for significant balance adjustment.
This lightweight set includes a two-piece top cheese plate, a 15mm LWS rod console, a 15mm LWS bridge plate, an adapter plate, and a pair of 9.4" lightweight 15mm rods.
The brand-new MonoTrack allows precise and solid assembly thanks to extremely accurate manufacturing techniques. MonoTrack, sleepers and clamping system can be self assembled without any tool, allowing faster set-up time. 3 times stronger than the previous version and manufactured using strong, lightweight and rigid anodized aluminium.
Bracket with 26 mm dovetail (insert side) interface on 15 mm rod - attaches to ArriHEAD rosette - can be pivoted on rosette or slid along rod. For use with 26 mm shoe-mounted accessories such as UMC-3 with - K2.52080.0 Quick Change Adapter 3/8 Set for UMC-3 and other accessories - - K2.52083.0 Dovetail Shoe - 3/8 thread or Wired Handgrip Attachments...
This set contains the support components in the ALEXA 35 Lightweight Set (K0.0041722) that attach to the camera's top, including the Viewfinder Cross Pipe for viewfinder mounting. Includes: 1x K2.0034179; 1x K2.0024062; 1x K2.0024066; 1x K2.0034554; 1x K2.0023948; 1x K2.0006186; 1x K2.0013302.
4 Way Leveling Camera Mount With 3/8" Slot-blk
The brand-new MonoTrack allows precise and solid assembly thanks to extremely accurate manufacturing techniques. MonoTrack, sleepers and clamping system can be self assembled without any tool, allowing faster set-up time. 3 times stronger than the previous version and manufactured using strong, lightweight and rigid anodized aluminium.
The brand-new MonoTrack allows precise and solid assembly thanks to extremely accurate manufacturing techniques. MonoTrack, sleepers and clamping system can be self assembled without any tool, allowing faster set-up time. 3 times stronger than the previous version and manufactured using strong, lightweight and rigid anodized aluminium.
The brand-new MonoTrack allows precise and solid assembly thanks to extremely accurate manufacturing techniques. MonoTrack, sleepers and clamping system can be self assembled without any tool, allowing faster set-up time. 3 times stronger than the previous version and manufactured using strong, lightweight and rigid anodized aluminium.
The CBP-1 is a baseplate compatible with the ALEXA Mini. The CBP-1 features an integrated shoulder pad. It offers the advantage of a sliding studio bridge plate without the added weight.
The CBP-2 is a baseplate compatible with the ALEXA Mini/ Mini LF. The CBP-2 offers the advantage of a sliding studio bridge plate without the added weight. The quick- release system allows the camera to be attached directly to the balance plate without having to slide the assembly out. For 19mm Studio, see CBP-1
Lightweight and durable ergonomic handgrip based on ARRI rosettes. Can be attached to rod bridge supports such as UBS-2 and LBS-2 or directly to the camera native rosette mounts. Triggers run functionality on cameras fitted with 3-pin RS run signals, such as ALEXA Mini, ALEXA, AMIRA and many third party cameras.
Hostess Tray Kit
The brand-new MonoTrack allows precise and solid assembly thanks to extremely accurate manufacturing techniques. MonoTrack, sleepers and clamping system can be self assembled without any tool, allowing faster set-up time. 3 times stronger than the previous version and manufactured using strong, lightweight and rigid anodized aluminium.
The CBP-3 is a 19mm all-in-one baseplate well-matched to handheld work as well as tripod operation.
The CBP-4 is a 15mm all-in-one baseplate well-matched to handheld work as well as tripod operation.
CRANE 3 LAB boasts a versatile and ergonomic structure that even revolutionizes the entire appearance. By holding the handle of the gimbal in a handy underslung position, youll find CRANE 3 LAB extremely effort-saving and flexible.
This handgrip configuration can be used with any camera, fitting to 15 mm lightweight support rods. Includes: K2.47861.0 2x Handgrip without on/off switch; K2.47863.0 2x Handgrip Extension, long; K2.66275.0 1x Lightweight Bridge Support LBS-2.
The brand-new MonoTrack allows precise and solid assembly thanks to extremely accurate manufacturing techniques. MonoTrack, sleepers and clamping system can be self assembled without any tool, allowing faster set-up time. 3 times stronger than the previous version and manufactured using strong, lightweight and rigid anodized aluminium.
Arri Camera Stop & Start Grip Telescopic Arri Rosette
Red Camera Stop & Start Grip Telescopic Arri Rosette
The Plate for C300 MkIII/ C500 MkII can be used either shoulder mounted compatible with a VCT-14 style plate such as the QRP-1 or by using the Bridge PlateAdapter BPA-5 to mount the cine-style BP-8, BP-9 or BPS-2. Both versions can be changed easily to the front and the back by sliding and exchanging one against the other without the need to detach any...
This handgrip configuration can be used with any camera, fitting to 15, 19 mm studio rods or 15 mm lightweight support rods. Includes:; K2.47861.0 2x Handgrip without on/off switch; K2.47863.0 2x Handgrip Extension, long; K2.0013320 1x Universal Bridge Support UBS-3
The brand-new MonoTrack allows precise and solid assembly thanks to extremely accurate manufacturing techniques. MonoTrack, sleepers and clamping system can be self assembled without any tool, allowing faster set-up time. 3 times stronger than the previous version and manufactured using strong, lightweight and rigid anodized aluminium.
Canon C500 Mark II camera cage, baseplate with handle
Adapterplate set: UAP-2 Adapter plate w/ 15mm rod mount (K2.0001221) - ALEXA center handle CCH-1 (K2.72007.0) - Viewfinder Attachement Bracket VAB-1 (incl. 15mm Rods) (K2.0001297) Note: availability may be pending at initial product launch. Includes: K2.0001221 - Universal Adapter Plate UAP-2 K2.72007.0 - Center Camera Handle (CCH-1) K2.0001297 -...
The DUB-2 finds its place at the back of a film cart for prep or on a fluid head for an extra shot. The DUB-2 is ideal for a camera rigged with a Tiffen or GPI PRO-style stabilizer camera plate, such a Steadicam M1/M2 or ARRI Artemis 1.
Arm
Rotatable Euro Adapter (M12)
Compatible with VCT- style plates such as the ARRI QRP-1. Offers a wide range of shoulder adjustments without affecting the placement of accessories fitted to the integrated 15mm LWS rod system.
SONY FS7M2 RIG BASEPLATE AND TOP PLATE
The ARRI Plate for Canon C700 is an hybrid support that is well-suited to common rental setups using studio bridge plates such as the BP-8 or BP-9, as well as documentary setups using VCT-style base plates like the ARRI QRP-1
The kit includes a formfitting cage, a mini top handle, a 15mm LWS baseplate, an 8" safety dovetail, and two 15mm rods that measure 9" in length.
Usually ships within 8 to 12 weeks
The ARRI Broadcast Plate for RED DSMC2 is a documentary-style baseplate compatible with VCT-style plates such as the ARRI QRP-1.
The ARRI plate for Panasonic AU-EVA1 is a hybrid support with 15mm LWS Base Plate and comfortable shoulder pad. The plate works perfectly with BP-8 or BP-9 and also with VCT-style tripod adapters such as the QRP-1
The DUB-3 is the compact version of the Dovetail Utility Base DUB-1. As with the DUB-1, the tool-free clamping mechanism of the DUB-3 TRINITY 2 allows the mounting of all available SAM dovetail plates, such as SAM Zero, SAM 1, SAM 2, etc. TRINITY 2 and as Upgrade to TRINITY Gen.1 with QL.
RED DSMC2 Accessory Kit (Base).
Usually ships within 8 to 12 weeks
This set contains the support components in the ALEXA 35 Lightweight Set (K0.0041722) that attach to the camera's bottom. Includes: 1x K2.0024745; 1x K2.0024161.
Stabilizing plate for AW-UE150. (Tuning floor version).
Usually ships within 6 weeks
Stabilizing plate for AW-UE150. (Tuning ceiling version).
Usually ships within 6 weeks
Mitchell Wedge Lock Set
For use with digital cameras - additional adapter cable required: K2.47649.0 - Digital Camera Handgrip Adapter Cable
This Ultra Handle System from Wooden Camera combines modular components to create a custom-configurable handle for your camera rig. Included in the complete system are two 5" extensions, one 3" extension, one 1" extension, a front connector, a rear connector, and a pack of multicolored rings.
Usually ships within 8 to 12 weeks
This baseplate and top plate set is compatible with Sony FX9. The baseplate features a shoulder mount, Arri rosette and 15mm rod system. This set also includes a left handle with Push-button technology. SHAPE is well known for its Push-button handle, now used by so many professionals in the industry. It gives users quick and easy adjustment.
The BP-19 MKII is a 19 mm, height adjustable balance plate with a unique quick release balancing system to find optimal balance and stability with all kind of different camera/lens combinations.
19mm Studio Sliding Baseplate For Sony Venice
Bottom Plate Set 600mm/24in incl. RSB-15. Includes: K2.0015952 1x Bottom Dovetail Plate 600mm/24in; K2.0000437 1x Rod Support Bracket, RSB-15
Bottom Plate Set 600mm/24in incl. RSB-19. Includes: K2.0015952 1x Bottom Dovetail Plate 600mm/24in; K2.0000440 1x Rod Support Bracket, RSB-19
The ARRI Top Plate for RED DSMC2 is designed for low-mode applications and features industry-standard threads. It connects to the cameras electronic interface and offers a LEMO connector compatible with the RED LEMO adapter B.
4 Way Leveling Mitchell Camera Riser
Canon C500 Mark II Top Plate, baseplate with handle
15mm Studio Sliding Baseplate For Sony Venice
The kit includes a formfitting cage, a mini top handle, a 15mm LWS baseplate, and two 15mm rods that measure 9" in length.
Usually ships within 8 to 12 weeks
Tiltaing CFast to M2 Side Storage Handle
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
A low mode plate with numerous 3/8-16 mounting points - two tape hooks and optional feet. Compatible with ALEXA - ALEXA Plus - ALEXA Plus 4:3 - ALEXA Studio (EVF-1 only) - ALEXA XT - ALEXA XT Plus or ALEXA XT Studio (EVF-1 only). For use with ALEXA Studio and OVF-1 the ALEXA Studio LMS Feet (K2.72093.0) are required.
EVF Bracket Set for Canon monitor unit. Includes: K2.0006140 1x Mini Viewfinder Bracket MVB-1; K2.0008955 1x EVF Bracket for Canon Monitor Unit.
Kit for Panasonic AU-EVA1 with Light Weight Support and Handgrip Extender: 401-EVA1 LWS with extendable Shoulder Pad, 2 Hirth Rosettes, V-Lock Plate, 401-FS7-5-03 Tripod Adapter Plate, 2 rods ? 15mm, length 205mm. 403-EVA1 Handgrip Extender with bayonet lock,incl. extension cable with jack connector, length 300mm, Hirth-Rosette with screws
Kit consisting of Base Plate, Top Plate Kit and remote handle for Sony FS5 Cameras.
Add a full modular top handle system to your RED KOMODO-X cinema camera with this Ultra Handle System from Wooden Camera.
Usually ships within 8 to 12 weeks
ENG style camera base mount with highly ergonomic shoulder pad and wedge plate adapter.
The system includes an Arca Baseplate with 15mm support, an Arca Riser to keep the rig at the proper lens height, a Top Cheese Plate to add accessories and optional rig components, and the 3" Ultra Handle attachment with a 3/8"-16 mount to get your modular top handle system started.
Usually ships within 8 to 12 weeks
EVF Bracket Set for Zacuto Gratical. Includes: K2.0006140 1x Mini Viewfinder Bracket MVB-1; K2.0008624 1x EVF Bracket for Zacuto Gratical.
EVF bracket set for Sony Viewfinder DVF-EL 200 includes: K2.0021525 1x EVF Bracket for Sony DVF-EL200 (Venice); K2.0006140 1x Mini Viewfinder Bracket MVB-1
EVF Bracket Set for Panasonic VariCam. Includes: K2.0006140 1x Mini Viewfinder Bracket MVB-1; K2.0010580 1x EVF Bracket for Panasonic VariCam.
EVF Bracket Set for RED DSMC2 viewfinder. DSMC2 RED EVF Mounting Plate is needed for mounting. Includes: K2.0006140 1x Mini Viewfinder Bracket MVB-1; K2.0012522 1x EVF Bracket for RED DSMC2 viewfinder.
A camera base mount compatible to accessories like BP-8/BP-9 for 19/15mm rods etc.
The Handle Extensions follow the design of the Camera Center Handle CCH-4.Includes: K2.0019791; K2.0019792; K2.0019797; K2.0019798; K2.0036917; K2.0019810; K2.0037131; K2.0037132
More than a grip, the CFexpress Type A to M.2 Side Storage Handle from Tilta has 512GB internal storage and a very fast write speed of 700 ms. Compatible with Sony a1, a7S III, a7 IV, and FX3 cameras, the handle has an anti-slip cushion, recording indicator, and a wrist strap holder. Constructed from aluminum, stainless steel, and rubber, the handle...
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
The Plate for Sony FS7II/FX9 with integrated 15mm lightweight support and a comfortable shoulder pad can be adjusted for perfect balancing. The plate is compatible with VCT-style tripod adapters such as the QRP-1 from ARRI or BP-8, BP9 and BPS-2.
Bridge Plate Sled BPS-2 Set. Includes: K2.66260.0 1x Bridge Plate Sled, BPS-2; K2.0015896 1x Bottom Dovetail Plate 300mm/12in.
Bridge Plate with diameter 19mm rods - L= 650mm - for Sony F23 - F35 - F65 and with LWS as adaptor for Red Epic / Scarlet - Canon C300 - C100 - C500 and with LWS 401-444HD
Arri Camera Stop & Start Grip Arri Rosette
Red Camera Stop & Start Grip Arri Rosette
MonoTrack 400
Matthews patent-pending Dovetail Cross Plate offers camera professionals greater versatility for camera orientation when mounting on a fluid or gear head.
Usually ships within 4 to 6 weeks
The 600mm/24 inch Bottom Dovetail Plate is the perfect solution when working with large and heavy zoom lenses where maximum balancing is required.
Easy Rig Anodized Plate
The NATO Matte Flag from Wooden Camera will mount onto the Cage Extension for the Fujinon Duvo HZK 25-1000mm box lens using a NATO clamp to provide protection from glare and flaring into the lens.
Usually ships within 8 to 12 weeks
Revolt VCT Universal Baseplate
The BP-9 helps optimize camera rig balance when combined with the range of ARRI bottom plates. It brings compatibility with studio 15 mm rod systems to an increasing number of ARRI and third party cameras.
V-Lock Quick Release Baseplate For Sony Fs7.
8000 V-Lock Quick Release Baseplate (Without Handles)
Add a tilting mount and a sun hood kit to your Atomos Neon 24" monitor with this Swivel Mount with Sun Hood & Top Handle from SHAPE. The durable aluminum mount is made up of two side plates, a top plate, a top handle, a swivel yoke mount, and a sun hood. The plates are installed via the included screw set, and the yoke mount attaches to the side plates.
The BP-8 helps to optimize camera rig balance when combined with the range of ARRI bottom plates. It brings compatibility with studio 19 mm rod systems to an increasing number of ARRI and third party cameras.
The BPA-6 combines a small shoulder pad with optically centered 15 mm lightweight rod clamps for small and lightweight camera builds. Interfacing directly with the wide dovetail interface on the BUD-1, the BPA-6 allows for rapid removal and significant balance adjustment. An integrated Touch and Go 35 snap-plate can be removed to allow mounting of the...
This set contains the support components in the ALEXA 35 Lightweight Set (K0.0041722) that attach to the camera's side. Includes: 1x K2.0033571; 1x K2.0033573; 1x K2.0034189; 1x K2.0023907.
Compatible with AMIRA - counterplate for the WPA-1 - to be mounted on the tripod head
Car Mount Kit for Action Camera
The BP-19 MKII is a 19 mm, height adjustable balance plate with a unique quick release balancing system to find optimal balance and stability with all kind of different camera/lens combinations. This kit comes without dove tail plate.
USBP-19/15D, 19mm & 15mm Universal Shoulder Base Plate with balance dove tail
The Vertical Adapter set for ALEXA Mini LF allows 9/16 portrait filming, addressing todays demands in new fields seen in commercials and special effects. Configurations can be built to allow quick reconfiguration between classic landscape and portrait image capture.
Monotrack 300
Lightweight and durable ergonomic handgrip without electronic components. It perfectly complements the K2.0009493 Master Grip Right Rocker MRR-1
Lightweight and durable ergonomic handgrip without electronic components. It perfectly complements the K2.0009363 Master Grip Left Wheel MLW-1
Bridge Plate with diameter 19mm rods - L= 440mm - for Sony F23 - F35 - F55 - F65 - Phantom Flex and with LWS as adaptor for Red Epic / Scarlet - Canon C300 - C100 - C500 and with LWS 401-450HD
Mount for Leica M (35mm still photography)
Bridge Plate with diameter 19mm carbon rods - L= 500mm - for Sony F23 - F35 - F65 and with LWS as adaptor for Red Epic / Scarlet - Canon C300 - C100 - C500 and wth LWS 401-444HD for all cameras wth an optical axis height between 45 and 66 mm.
Adaptor for Kollimator and Projector to lenses with Nikon F-Bajonett (35mm still photography)
The system includes a variety of durable aluminum plates that provide different size plates, 1/4"-20 and 3/8"-16 threads, 15mm rod mounts, mini rails, and mini rail clamps.
Usually ships within 8 to 12 weeks
24" dovetail plate
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Customize the top plate of your Sony VENICE or VENICE 2 camera in a configuration that best suits your mounting needs with this Quick Release Top Plate System from Wooden Camera. The main component of the system is the top plate which slides onto the camera's preexisting top dovetail mount.
Usually ships within 8 to 12 weeks
Platform
The plate is compatible with VCT-style quick-lock plates such as the QRP-1 from ARRI. With its ergonomic shoulder pad, it converts the Plate for Sony Venice 1/2 (K2.0043726) into a shoulder camera set-up.
Bridge Plate incl. diameter 19mm Carbon Rods - l. 500mm (for combination with 401-130 Quick-lock Tripod Plate)
Bridge Plate incl. diameter 19mm Rods - l. 440mm - exclusive for Sony HDC 1500 camera. (For combination with 401-130 QuickLock Tripod Plate. Attention: Please unscrew lever enforcement at the lock-lever end)
C-Box (Converter, Gold Mount)
Usually ships within 8 to 12 weeks
Canon C500 Mark II shoulder mount
Panasonic LT Quick release baseplate
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Panasonic 35 camera Quick release baseplate
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Single Telescopic Shape Handle Arri Rosette
Shoulder Mount for Sony FS5
PWS-SL-39V/425W-100/240VAC
Delivery time of 4 to 6 weeks
CSP-1 clamps on 15mm LWS rods forward or backwards of the baseplate to suit best balance on the shoulder. The camera rig can rest on the CSP-1 on a flat surface.
QuickLock Tripod Plate for cameras with V-mount, 3/8" + 1/4" threads. Ultra-lightweight made of aircraft-grade aluminium, low-noise locking mechanism, play-free fixing of the camera by push and pull (replaces 401-130)
BP-18 Flat Balance plate 19mm BP19-01
The 450mm/18 inch Bottom Dovetail Plate fits perfectly with smaller and medium zoom lenses where a bit more balancing is required.
MonoTrack 200
This Top Handle kit combines our Top Plate for the Arri Alexa 35 with the Universal sliding Top Handle system.
Lightweight Plate And Top Plate For Sony Fs7. Includes: ARRI rosettes on each side to fit our HAND12 & Sony FS7's right handle; a pair of 15mm 8 inch rods; Ratchet key knob to secure the rods; a bottom door to access the attaching screws; a delta plate to attach on PANASONIC quick release plate SHAN TM-700, SONY VCT14; Top Plate; Remote Extension Handle
26mm dovetail insert. Both sides attach to 3/8-16 UNC thread mounting points having standard Arri diameter 15,5mm counterbore for attaching and quickly removing accessories from a camera (compatible with UMC-3A). Includes: K2.52082.0 - Dovetail Insert - 3/8 Thread - K2.52083.0 - Dovetail Shoe - 3/8 thread
Bridge Plate 19mm Studio Arri Standard And 12" Dovetail Plate
USBP-15D, 15mm Universal Shoulder Base Plate with balance dove tail
Euro to Euro Riser W/pipe Adapter for 1-1/2" Sch. 40(48.3mm)
Stop And Start Wood Handle For Arri Camera
Stop And Start Wood Handle For Red Camera
Surface
Mini 4 Way Leveling Camera Mount With 3/8" Slot-blk
Bridge Plate 15mm Studio Arri Standard And 12" Dovetail Plate
Allows camera operators to adjust camera settings while framing. Handgrip Extension Bracket HGA-1 includes acable fitted with the Canon proprietary connector
With adjustable rod centering for all common digital cameras.
Universal Adapter Plate UAP-2 with 15mm rod mounting receptacles. Attachable to the dove tail on top and bottom of AMIRA. Can be used for regular or low mode Steadicam use.
Easy Top (RED DSMC2)
Usually ships within 8 to 12 weeks
The accessory plate system includes a variety of durable aluminum plates that provide different size plates, 1/4"-20 and 3/8"-16 threads, 15mm rod mounts, mini rails, and mini rail clamps.
Usually ships within 8 to 12 weeks
Top Handgrip And Top Plate For Sony Venice With 15Mm Lw Front Rod Clamp
Sony FX9 V-lock quick release baseplate
Facilitates the loading of your equipment on tracks.
Bent handle assembly for GPI Pro gimbals. Due to the fact that the GPI Pro gimbal handle is too short for the TRINITY application, it needs to be replaced by this bent handle.
Quick Release Baseplate for Sony FX9
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
MonoTrack 100
With adjustable rod centering for all common digital cameras.
Wooden handgrip with double Lanc switch (right hand)
Base plate for new Sony PXW-FS7, flat base short plate, dovetail plate, two pairs of rails
Mitchell to Mitchell Riser With Pipe Clamp Adapter
Light Weight Support for Canon EOS C700 (FF) with integrated shoulder pad, 2 rosettes, V-Lock for quick-release plate, rear rod clamp, Tripod Adapter Plate, 2 rods ? 15mm, length 205mm
Light Weight Support for Sony PXW-FS5, with extensible Shoulder Pad, 2 Hirth Rosettes, V-Lock Plate, 401-FS7-5-03 Tripod Adapter Plate, 2 rods ? 15mm, length 205mm, (Optional: 401-FS7-5R-01 Rear Rod Clamp)
Light Weight Support for Panasonic AU-EVA1, with extensible Shoulder Pad, 2 Hirth Rosettes, V-Lock Plate, 401-EVA1-03 Tripod Adapter Plate, 2 rods ? 15mm, length 205mm, (Optional: 401-EVA1-R-01 Rear Rod Clamp)
The Broadcast plate fits toquick release tripod adapters and offers support for 15 mm LWS rods
Does not include Support Rod Holder or bottom dovetail plate.
Euro Paddle Mount
The SHAPE Nucleus Double Quick Trigger Grips consist of left and right rosette-mount handgrip frames with SHAPE's famed push-button technology, and two relocators for attaching two Tilta Nucleus-M handgrips.
Tilta PL Mount to LPL Mount Adapter
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
The Arri Lens Support LS-9 is an adjustable and lockable bridgethat clips to 19 mm rods. The lens issecured via a 3/8-16 thumbscrew.
The Arri Lens Support LS-10 is an adjustable and lockable bridge that clips to 15 mm rods. Thelensis secured viaa 3/8-16 thumbscrew.
Case
The ARRI Cine Plate for RED DSMC2 fits over classic studio bridge plates such as the ARRI BP-8 and BP-9, and offers a pair of sturdy rosettes.
The system includes a variety of durable aluminum plates that provide 1/4"-20 and 3/8"-16 threads, 15mm rod mounts, mini rails, and mini rail clamps.
Usually ships within 8 to 12 weeks
The system is made up of an EVF plate, a universal EVF swivel arm, a universal accessory rail swivel clamp, a bolt-on rail clamp, and a universal 15mm rod clamp.
Usually ships within 8 to 12 weeks
150mm Half Ball With Euro Adapter
Camera Wedge Plate
Canon C500 Mark II V-lock quick release baseplate
Universal Camera Ball Leveling Head
Articulated accessory holder arm for attaching accessories with 3/8-16 UNC mounting points to cameras with 3/8-16 mounting points. 240mm/9.4 long - with two swivel ball joints and one elbow joint. Has combination fastener system for use with plain 3/8-16 UNC threaded holes orArri 3/8-16 mounting points with locating pins.
MonoTrack 50
All purpose 26mm dovetail insert. Can beattached to 3/8 thread mounting points having standard Arri diameter 15,5mm counterbore. For use with 26 mm dovetail shoes.
Crane 3 LAB Master Accessory Kit
ENG STYLE CAMCORDER SHOULDER MOUNT
This adapter plate is designed specifically for Sony F5 and F55 cameras - making them compatible with lightweight support standards - including a built-in Sachtler Touch and Go plate. With this - the camera can be mountedto a head or anything else with a standard quick release plate - allowing it to be quickly and safely secured - for example in between...
MonoTrack 30
Light Weight Support for Sony PXW-FS5, with extensible Shoulder Pad, 2 Hirth Rosettes, V-Lock Plate, 401-FS7-5-03 Tripod Adapter Plate (Optional: 401-FS7-5R-01 Rear Rod Clamp)
18" dovetail plate
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
SONY FS7M2 V-LOCK QUICK RELEASE BASEPLATE
The Vertical Format Baseplate allows shooting with the ALEXA 35 on its side for portrait shooting (9:16) and attaches to the ALEXA 35's right side and interfaces with Compact Bridge Plates, Bridge Plate Adapters, Shoulder Pads and the Stabilizer Adapter Mounts.
Unified Baseplate (Sony Venice, Rialto, F55, F5, URSA Mini)
Usually ships within 8 to 12 weeks
Unified Baseplate (Sony FS5, Panasonic EVA1, VariCam LT, VariCam 35)
Usually ships within 8 to 12 weeks
Unified Bridgeplate (19mm)
Usually ships within 8 to 12 weeks
Unified Bridgeplate (15mm Studio)
Usually ships within 8 to 12 weeks
Unified Baseplate (Canon C300mkIII, C500mkII, C200, C200B, C700)
Usually ships within 8 to 12 weeks
Solid Baseplate (Sony Venice, F55, F5) is a fixed baseplate that provides pass-through lightweight 15mm rod support at the correct lens height along with ARRI standard rosettes on each side
Usually ships within 8 to 12 weeks
LW 15mm Baseplate (RED Komodo)
Usually ships within 8 to 12 weeks
LW 15mm Baseplate (Canon C70)
Usually ships within 8 to 12 weeks
OConnor Easy Load ARRI Dovetail (2575, 2065, 120EX, 12")
Usually ships within 8 to 12 weeks
Compatible with Sony Venice 1/2. The Plate comes with two integrated 15mm lightweight supports (at the front and the back) and is compatible with the BPA-5 (K2.0017138) and the BSA-1 (K2.0043749). This plate offers a pair of M4 threads on each side to attach the side brackets left and right.
Wooden Camera - Universal Baseplate
Usually ships within 8 to 12 weeks
USBP-15F, 15mm Universal Shoulder Base Plate with flat base
Unified VCT Wedge Plate
Usually ships within 8 to 12 weeks
1,000mm extension piece for the tuning slope. Including 2x connection plate kit.
Usually ships within 6 weeks
Euro Female Clamp to Pipe Clamp
Shape Tripod Pan Handle Telescopic Push-Button for Sachtler
Tripod Pan Handle Telescopic Push-Button for Cartoni
Tripod Pan Handle Telescopic Push-Button for
SHAPE VCT UNIVERSAL BASEPLATE ARRI ROSETTE
Articulated accessory holder arm for attaching accessories with 3/8-16 UNC mounting points to cameras with 3/8-16 mounting points. 120mm/4.7 long - with two swivel ball joints and one elbow joint. Has combination fastener system for use with plain 3/8-16 UNC threaded holes orArri 3/8-16 mounting points with locating pins.
Offers front and rear 15mm LWS integrated rod consoles, a pair of ARRI rosettes and direct compatibility to studio bridge plates such as BP-8 and BP-9.
This cheese plate features a detachable center that can be removed to accommodate a Sony BURANO, Sony FX9 (includes height adjustment), or ARRI CCH-4 top handle.
Led Controller w/Timo & Antenna
Delivery time of 4 to 6 weeks
Create smooth vehicle-based video footage using your handheld gimbal, small mirrorless camera, or DSLR with this SC-15K 4-Arm Suction Cup Camera Mount Kit from SmallRig.
Usually ships within 4 to 5 weeks
Vacumm Suction Cup With Compact Compact Camera Bracket
Base plate for Aja Cion, with V-lock and flat base plate short, two pairs of rails
AIR EVF Extension Arm (Sony Venice, DVF-EL200 EVF) is an ultra-lightweight extension for the AIR EVF Mount (Sony Venice, DVF-EL200 EVF) and also the Sony viewfinder mount that is included with the EVF
Usually ships within 8 to 12 weeks
70mm High Leveling Base
The 300mm/12 inch Bottom Dovetail Plate is the standard for all prime lenses where minimal balancing is required.
Quick Release Plate
Usually ships within 6 weeks
Battery Plate for Sony FX9 - V-Mount
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Battery Plate for Sony FX9 - Gold Mount
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
with RS 3-Pin connector - cables with otherconnectors available
Add a versatile Top Plate System from Wooden Camera to your Sony BURANO cinema camera. The system is made up of a cheese-style top plate, a front dual 15mm LWS rod clamp, and a 15mm LWS upper rod clamp.
Usually ships within 8 to 12 weeks
150mm Half Ball Adapter
The BUD-3 opens the ALEXA Mini LF to modern and sturdy accessory set-ups developed for ALEXA 35. The BUD-3 accepts ALEXA Mini side brackets as well as the Rear Accessory Brackets RAB-1 and RAB-3.
This Ultra Handle Standard Kit from Wooden Camera combines modular components to create a custom-configurable handle for your camera rig. Included in the standard kit are one 5" and one 1" extension, a front connector, and a rear connector.
Usually ships within 8 to 12 weeks
Sony Venice Top Handle
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
The kit consists of a top handle, a cheese plate, and a 15mm rod port adapter. The entire assembly is constructed from durable aluminum and mounts on top of the C500 Mark II camera.
Top dovetail bridge plate with 19mm steel rods
Only Top Bridge of Bridge Plate F235 incl. diameter 19 mm steel rods - L=440mm
Only Top Bridge of Bridge Plate F235 incl. diameter 19 mm carbon Rods - L=500 mm
Camera Riser 12" ( Mitchell to Mitchell)
Eyepiece Leveler Bracket Base for OConnor Pan and Tilt Heads
Usually ships within 8 to 12 weeks
The Battery Slide Pro Gold Mount for Sony FX9 from Wooden Camera attaches to the rear of the camera and supports a Gold mount battery while leaving access to the camera's standard battery compartment.
Usually ships within 8 to 12 weeks
Mount your Sony BURANO cinema camera onto a sturdy but lightweight Baseplate System from Wooden Camera. The low-profile system is made up of a 15mm LWS Arca-type baseplate and an Arca-type riser plate.
Usually ships within 8 to 12 weeks
Pivotable clamp arm to attach Master Grips to fluid head pan handles with up to 32mm tube diameter
The Centre Camera Handle CCH-5 is a full-size production top handle for the ALEXA 35 that can be quickly attached and removed from the LMS-4 without tools. Featuring a wider, more comfortable grip than previous top handles the CCH-5 has been designed to allow common gimbal top plates to remain mounted to the camera, under the handle.
Canon C500 Mark II camera cage
Sony FS5 camera Quick release baseplate
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Canon C200 Quick release baseplate
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Panasonic EVA1 Quick release baseplate
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
BMD Quick release baseplate
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Lightweight Plate And Top Plate For Sony Fs7.
Top Plate incl. diameter 19mm carbon Rods - l. 440mm
The Base Plate fo the Venice Extension Unit is compatible with the BPA-5 and the ENG-style shoulder bottom part from the plate for Sony Venice. Like with the Sony Venice both can be easily attached by sliding them on and off from front or back. The release button is accessible from both sides. 15mm lightweight rod support standard is integrated.
The new Top Plate allows the use of the original Sony handle. The middle part of the plate can be removed. Both plates can be used separately if required, e.g. to save weight. The Top Plate is equipped with a variety of 3/8" and RMB-3 interfaces.
This Stabilizer Plate helps balance ALEXA Mini/Mini LF cameras on stabilizer systems with heavier prime lenses or shorter zooms that require support. A Balance Utility Dovetail BUD-2 is required if not provided in the camera set. To support smaller zoom, the Compact lens Support CLS-1 is available.
The ARRI Plate for VariCam LT is an hybrid support that is well-suited to common rental setups using studio bridge plates such as the BP-8 or BP-9, as well as documentary setups using VCT-style base plates like the ARRI QRP-1.
Light Weight Support for Canon EOS C300MKII with sliding, detachable Shoulder Pad. For use also with BridgePlate 401-F235 or Quick-Lock Plates. Incl. V-lock Plate, 401-C300MKII-01A Tripod adapter plate with 3/8" + 1/4" threads, 2 rods dia. 15mm, 310mm length. Also compatible for EOS C100, C300, C500
500mm Extension piece of Tecnopoint riser
Usually ships within 6 weeks
Add this Ultra Handle 4" Kit from Wooden Camera to your RED DSMC3 cinema camera, such as the KOMODO, KOMODO-X, or V-RAPTOR, to add handheld support, trigger control, and additional accessories.
Usually ships within 8 to 12 weeks
Pivotable clamp arm to attach Master Grips to fluid head pan handles with 18mm tube diameter
The ARRI Top Plate for Canon C700 is a low-mode support, featuring numerous accessory threads and a built-in console for 15 mm LWS rods
The Lightweight Camera Handle LCH-1 is a lightweight carbon-fiber top handle for carrying the ALEXA 35 and for mounting accessories. It can be quickly attached to or removed from the camera's top or the Universal Adapter Plate UAP-3 without tools, and the handle post can be slid forward and backwards to balance the camera in your hand.
UPS Baseplate
Camera Riser 6" ( Mitchell to Mitchell)
UVF Mount (LCD, No Clamp)
Usually ships within 8 to 12 weeks
Pivotable clamp arm to attach Master Grips to fluid head pan handles with 20mm tube diameter
Low-mode plate fitted with an integrated 15mm LWS rod console that provides room for handle and accessories.
The MAP-2A is the evolution of the Mini Adapter Plate MAP-2, featuring an improved rod clamping mechanism
Light Weight Support for Canon EOS C300MKII without rods, with sliding, detachable Shoulder Pad. For use also with BridgePlate 401-F235 or Quick-Lock Plates. Incl. V-lock Plate, tripod adapter plate Also compatible for EOS C100, C300, C500
Sony FX6 remote extension handle and cable
Bridge Plate 15mm Studio Arri Standard
Bridge plate 19mm studio Arri standard
This Faceplate Cage System from Wooden Camera provides you with both a front plate cage and a dual 15mm rod clamp for your Sony VENICE series camera. Multiple mounting points on the main cage allow for easy integration of cine lens motors and accessories. Lens-centered mounting points for the dual 15mm rod clamp make integrating follow focus motors and...
Usually ships within 8 to 12 weeks
Flat Base Tripod Adapter (150/100mm) W/ Euro Adapter
Handgrip Extender with bayonet lock for Panasonic AU-EVA1, extendable from 175 to 250mm, incl. 403-EVA1-01 cable with 2,5mm jack connector and socket, length 300mm, Hirth-Rosette with screws. For use with Chrosziel LWS 401-EVA1 or directly on the camera with included HirthRosette
Handgrip Extender with bayonet lock for Sony PXW-FS5, extendable from 175 to 250mm, incl. cable with 2,5mm jack connector and socket, length 300mm, Hirth-Rosette with screws. For use with Chrosziel LWS 401-FS5 or directly on the camera with included Hirth-Rosette
Panasonic Au-EVA1 Camera Bayonet Mount Remote Extension With Cable
Panasonic Au-Eva1 Remote Extension With Cable
Fitting to 15 mm lightweight support rods - this modular shoulderpad makes operating smaller video cameras - DLRs and equipped with film-style accessories and ALEXA M head and ALEXA XT M head much easier. Shipped with both straight and curved foam pads tosuit all operator's needs. Includes: K2.66168.0 - Universal Mounting Bracket (UMB-1) for Lightweight...
The Top Plate for C300 MkIII/ C500 MkII offers a variety of 1/4-20"; 3/8-16" and M4 threads for additional accessory support such as the RMB-3, CCH-4 (CCH-4 Sliding Adapter option) or CCH-2. An integrated optically centered 15mm lightweight support interface allows to mount 15mm rods or the Mini Viewfinder Bracket MVB-1 (K2.0006140).
Welded Aluminium Frames (122 x 200 cm) Pack of 5 pieces
Compatible with Sony Venice 1/2. Low-mode support, featuring numerous threads (3/8-16; 1/4-20; M4) for additional accessories and an optical centered built-in 15mm lightweight console with the possibility to use either the original Sony Venice Viewfinder and bracket or ARRI´s Mini Viewfinder Mounting Bracket MVB-1 in combination with the EVF bracket for...
Quick Release Baseplate for Canon C500 Mk II/C300 Mk III
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
*10" Vacuum Suction Cup With Cheese Plate & 1-1/2" Starter
Single Pipe Trolley With Universal Gimbal Adapter
250mm extension piece for the tuning slope. Including 2x connection plate kit.
Usually ships within 6 weeks
Dovetail base plate adapter for Panasonic Varicam
Wooden Camera - MFT to PL Adapter (Pocket)
Usually ships within 8 to 12 weeks
Recorder Slide
Usually ships within 8 to 12 weeks
Outfit your FUJIFILM X-H2S camera with this Full Camera Cage from Wooden Camera to protect the camera body while expanding its mounting capabilities. Its wraparound custom-fit design offers increased stability to your X-H2S without blocking ports and controls, as well as multiple 1/4"-20 and 3/8"-16 threads with ARRI-standard locating pins.
Usually ships within 8 to 12 weeks
This two-piece cage mounts directly onto the rear of the KOMODO-X and provides multiple 3/8"-16 and 1/4"-20 anti-twist threads to add a variety of accessories.
Usually ships within 8 to 12 weeks
Tilt and Swing Arm for UMB-1 Universal Mattebox
Usually ships within 8 to 12 weeks
Wooden Camera - Safety Dovetail (18")
Usually ships within 8 to 12 weeks
14" dovetail plate
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Harden the whole unit and keep the correct space of gauge. Two red anodized aluminium tightening wheels included.
200mm Extension piece of Tecnopoint riser
Usually ships within 6 weeks
Universal Handgrip Extender with Hirth rosette for Canon EOS C700 and other cameras, extendable between 180 and 250mm
The battery plate allows industry standard battery mounts such as V-mount and Gold Mount to fit to 15mm LWS rods. The battery plate can be offset in order to clear rear card slots or optimize balance. Note: Battery adapters will be available separately and are not part of BAP-1.
The Vertical format Adapter set is required to use the ALEXA Mini with the sensor orientated portrait ("vertically").
C-cage for BMD Pocket 4K kit consisting of the C-cage for BMD Pocket 4K (0600-1000), the Top handgrip Mini (0600-1010) and the SSD holder (0600-1020). The Vocas C-cage kit is designed to give you maximum protection of the camera while at the same time adding minimal weight to your gear. The C-cage with an angled HDMI connector, a Top handgrip Mini and a...
Panasonic VariCam dovetail adapter plate for USBP MKII
Together with a dedicated Top Plate this Top Handle is adjustable in length direction for optimal balance adjustment. The Top Handle can also be used pointing in a forward direction.
100mm Extension piece of Tecnopoint riser
Usually ships within 6 weeks
150mm extension piece for the tuning slope. Including 2x connection plate kit.
Usually ships within 6 weeks
Camera Riser 3" ( Mitchell to Mitchell)
The ARRI Top Plate for Canon C200 is a low-mode support, featuring numerous accessory threads and a built-in console for 15 mm LWS with the possibility to use either the original C200 or the ARRI CCH-2 top handle
The Articulated Mounting Plate AMP-1 is a hinged plate that allows accessories to be mounted in locations that would have previously prevented access to various camera ports. The AMP-1 allows further adjustment up/down in relation to its attachment bracket.
The Rear Accessory Bracket RAB-2 allows accessories to be mounted behind the ALEXA 35. This can be done for organizational reasons or to better balance the camera. It requires the Top Extension Bracket TEB-1 to be attached to the top of the camera, and the Balance Utility Dovetail BUD-1 to be attached to the bottom of the camera.
Canon C500 Mark II Remote Extension Handle with Cable
400mm Extension piece of Tecnopoint riser
Usually ships within 6 weeks
Welded Aluminium Frames (122 x 122 cm) Pack of 5 pieces
60mm extension piece for the tuning incline.
Usually ships within 6 weeks
For ENG and documentary-style shooting, the Shoulder-Mount Kit designed for the Blackmagic URSA Mini provides a shoulder mount for you to comfortably rest the camera on your shoulder for long shooting sessions.
Alexa Mini Gold Mount Cheese Plate
Alexa Mini V-Mount Cheese Plate
300mm Extension piece of Tecnopoint riser
Usually ships within 6 weeks
Top Plate for Arri Alexa 35 (including 15 mm rail holder)
MasterEye Visual Controller VC100
100mm Hi-hat With Cheese Plate
Light Weight Support for Chrosziel Camera Cage Systems, with two dia. 15mm rods, L. 205mm, sliding through, mounts on tripod adapter plate and on Chrosziel 700-A7II and 700-GH5
QuickAdaptor - 15mm holder clamping to rods with diameter 19mm - quick-lock device
Base plate (l. 290mm - 11 inch) for bridge plate unit
Top plate of bridge plate unit 401-121 (without rods)
Only Top Bridge of Bridge Plate for F23/F35 WITHOUT diameter 19mm Rods
Hand-held Camera Accessory Kit - for all LWS with diameter 15mm rods in front of and behind the camera - consisting of handles 403-20L and shoulder support 3050 MultiPad
The baseplate features an Arca-type dovetail designed to work with the Wooden Camera Baseplate System for the Sony BURANO.
Usually ships within 8 to 12 weeks
Leather handgrip kit, including a handgrip combi rail bracket (0390-0006) and two short leather handgrips (0390-0004). The handgrip combi rail bracket (0390-0006) can be mounted to any 15 mm LWS, 15 mm studio and 19 mm rail supports.
Canon C200 Remote Extension Handle With Cable
Attaches to the Side Camera Handle (SCH-1) instead of the Adjustable Center Grip Medium (ACG-1). Provides enough space for third PARty on-board recorders of different heights.
The SAB-1 allows users to position accessories towards the rear of the ALEXA Mini in order to optimize balance and bulk. Includes: K2.0012692 1x Side Accessory Bracket SAB-1; K2.0006186 1x Rod mounting bracket RMB-3; K2.66255.0 1x 15 mm Reduction Insert
Top plate required for use of ALEXA Mini LF and Vertical adapter. Features interfaces for CCH-2 handle, MVB-1 and VMB-3 viewfinder brackets and tape hooks. Included in KK.0024136 Vertical Adapter Set for ALEXA Mini LF
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips. Includes: K2.0012917 1x Handgrip Extension 240mm; K2.0012921 2x Cable Clip 15mm.
12" dovetail plate
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
The Manfrotto 320PX Plexiglass Panel is a white translucent plexiglass that mounts with touch fastener tape, and may be tilted/bent upward and locked into place, to any angle up to 90°, for totally seamless backgrounds. It is designed to fit the Manfrotto 320 shooting table frame, but may be suitable for your own shooting table frame
Usually ships within 4 to 8 weeks
Eyepiece Leveler Telescoping Arm
Usually ships within 8 to 12 weeks
Integrate 15mm rod support systems at the correct lens height for your FUJIFILM GFX 100S or X-H2S camera using this LW 15mm Baseplate from Wooden Camera. The quick release baseplate has dual 15mm rod ports that have two locking thumbscrews to tighten or release the system.
Usually ships within 8 to 12 weeks
Trigger Handle (RED DSMC2)
Usually ships within 8 to 12 weeks
Revolva Pass Through Top Plate (DSMC2)
Usually ships within 8 to 12 weeks
Unified Baseplate Core Unit (No Dovetails)
Usually ships within 8 to 12 weeks
The Adapter is allows quick transition between Tripod / Shoulder and DJi Ronin 2 stabilizer for ALEXA Mini and ALEXA, Mini LF with Compact Bridge Plates CBP-1 (19mm studio) and CBP-2 (15mm studio). The CBP Adapter fits to the Ronin 2 "camera base plate"
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips. Includes: K2.0012911 1x Handgrip Extension 160mm; K2.0012921 1x Cable Clip 15mm.
The top plate for Sony F5 and F55 cameras is designed to offer multiple mounting interfaces for accessories. An Arri handle can be attached at three different positions to optimize balance - although the original Sony handle remains compatible. With its multiple centered interfaces - the top platecan also be used as a low mode plate for Steadicam shots.
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips
Arri's Lightweight Bridge support LBS-2 comes with hard-mounted rosettes - offering support for handheld set.
Compatible with MBP-3 - MBP-1 Pro BP - Adapter Plate for Canon C100/300/500 - Adapter Plate for SonyF5/F55 - Adapter Plate for Canon 1DX-1DC - Adapter Plate for RED Epic/Scarlett
Vacumm Suction Cup With Cheese Plate
Canon C500 Mark II Push-Button Viewfinder mMount
Handgrip kit, including 19mm and 15mm combi bracket (#0390-0006) and two handgrips (#0390-0005)
Elemack Anodized Aluminium Plate Base + European Coupling
The kit includes the LCD support bracket and the Sony 8T to 15mm viewfinder extension bracket.
Clamping base 20sz, Opening 80mm, 150 x 82 x 60 mm, on request
Ships within 4 weeks
For using handgrips with rosettes on: K2.66173.0 1x Adapter Plate for Canon EOS C100 /300/500 and/or the Cage System
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips
ARRIs Universal Bridge Support UBS-3 offers compatibility with 19 mm studio, 15 mm studio and 15 mm lightweight rods and comes with hard-mounted rosettes with a total weight of only 240g
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips. Includes: K2.0012913 1x Handgrip Extension 80mm; K2.0012921 1x Cable Clip 15mm.
Pro Set 15mm Reduction Insert. The 15 mm reduction insert can be fitted to any 19 mm rod mount to allow compatibility with 15 mm rods. Includes: K2.66255.0 10x 15mm Reduction Insert
Red V-Mount Cheese Plate
Red Gold Mount Cheese Plate
Including double 15 mm rail holder at the front for alternative viewfinder attachment or lens motors. Allows the original Sony handgrip and viewfinder bracket to be used.
Universal Head 7-12 Feet (210-350 Cm)
Cheese Plate Mitchell Hi-hat
Universal Bridge Plate Arri And 12" Dovetail Plate Arri Standard
Bended Aluminium Frames (122 x 200 cm)
UVF Mount (Sony FX9, FS7, FS7mkII, Panasonic EVA1, No Clamp)
Usually ships within 8 to 12 weeks
Universal Head 5-10 Feet (15-300 Cm)
For attaching at the Cage System
Attaches to ALEXA M Bridge Plate Adapters (AMB-1/2)
Welded Aluminium Frames (90 x 90 cm) Pack of 5 pieces
Touch and Go Receiver Only (120mm Oconnor Euro, Sacthler 35, Ronford Baker RBQ Compatible)
Usually ships within 8 to 12 weeks
Tilta Float System Post
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
LWS - Light Weight Support 15 HD Allround - w. diameter 15 mm rods L. 310 mm - double rod guidance and clamp - adjustable for any camera with optical height betw. 26.5 a. 72.5mm (distance betw. lens center and camera bottom). Spacers (pairs) of 1 - 2 - 4 - 8 - 2 x 16 mm - set of screws - table with camera heights and Allen wrench are included.
LWS Light Weight Support for Panasonic DVX-200
LWS - Light Weight Support 15 HD HPX-250 - assembled for use with Panasonic HPX-250 - with diameter 15 mm rods - L. 310mm - double rod guidance and clamp.
LWS - Light Weight Support 15 HD for DSLR camera with anti-twist block - w. diameter 15 mm rods L. 310 mm - double rod guidance and clamps. Adjustable for larger camera bodies by removing spacers. Shorter M5 x 45 mm screws and Allen wrench are included. (Compatible for Canon EOS 5D - Nikon D800 - Nikon D90 - Panasonic DMC-GH3 - Black Magic Pocket Camera)
LWS - Light Weight Support 15 HD for Sony F3 camera - w. diameter 15 mm rods L. 310 mm - double rod guidance and clamps. Also for combination with Bridgeplate Cine with diameter 19mm rods (e.g. 401-F235 - BP-8).
LWS - LightWeightSupport 15 HD for Nikon D800 camera with anti-twist block - assembled - with diameter 15 mm rods - L. 310 mm - w. thread for extensions - dual rod guide and clamps.
LWS LightWeightSupport 15 HD for Canon EOS C100 - 300,500 camera with diameter 15 mm rods L. 310 mm - w. thread for extensions - dual rod guide and clamps
The Stabilizer Adapter Mount SAM-Zero is the standard camera plate for most ARRI Camera Stabilizer systems products. The 254mm (10) plate will allow most camera featuring 3/8 threads on the base to be safely mounted to ARRI Trinity, ARRI MAXIMA, ARRI SHR-3 and SRH-360. Includes: 2x 3/8" Screws
The handle adapter allows to attach the Panasonic AU-EVA1 handgrip at a handgrip extension. This allows to extend the distance between camera and handle. Using the HGA-3 requires a longer, separately sold LANC cable
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips
The shortest of our Bottom Dovetail Plates fits very well on camera carts, car mounts, Steadicam or with any applications when balancing is not necessary, but the interface is welcome to work with an SBP-1 or BP-8/-9.
The CSP-2 is a very light, flat shoulder pad with a long Visco pad for the ALEXA 35. Its four feet allow the camera to be safely seated on a flat surface when not on the operator's shoulder.
Multi Monitor Mounting Bracket W/ Quick Release Mounting Set
Sony FX6 Push-Button view finder mount
Stirrup 5-10 Feet (150-300 Cm)
Universal Head 4-8 Feet (120-240 Cm)
The Clamp 2 for RAB-1 offers a strong and reliable connection to the Rear Accessory Bracket RAB-1. The Clamp 2 features a safety lock to prevent the battery plate dismounting unintentionally
The Rear Accessory Bracket RAB-1 offers lightweight and flexible attachment options for power solutions. Fits ALEXA Mini / Mini LF
This baseplate fits to ALEXA Mini/Mini LF and is the common interface to the Compact Bridge Plate CBP-1/CBP-2 and Stabilizer Adapter Mount SAM-2. The BUD-2 is available separately to complement Stabilizer plates for CBP 225mm/9in, 355mm/14in and 450mm/18in.
Allows the Compact Bridge Plate to convert into a Stabilizer Adapter Mount for ALEXA Mini (SAM-2). The Stabilizer Plate for Compact Bridge Plate is also compatible with third party stabilizer systems fitted with a standard 60mm dovetail.
With integrated level marker and many industry standard 3/8" and 1/4" threaded holes.
Bended Aluminium Frames (122 x 122 cm)
LW 15mm Baseplate (Blackmagic Pocket Cinema Camera 6K Pro) is a quick release baseplate that provides lightweight 15mm rod support at the correct lens height.
Usually ships within 8 to 12 weeks
UVF LCD Sled
Usually ships within 8 to 12 weeks
Top Plate (Sony Venice) is a top cheeseplate for the Sony Venice that contours to the shape of the camera body and leaves the USB port area open
Usually ships within 8 to 12 weeks
Top Plate (Canon C300mkIII, C500mkII)
Usually ships within 8 to 12 weeks
Top Plate (Sony FX9)
Usually ships within 8 to 12 weeks
Top Plate (Canon C70)
Usually ships within 8 to 12 weeks
Universal Head 3-6 Feet (90-180 Cm)
Paddle Mount: Euro Apapter for 2" Copupler Tube(M12)
Euro Adapter
Paddle Mount: Euro Apapter for 2" Copupler Tube
The Shape Telescopic Support Arm + Rod Block includes a Manfrotto 233B Camera Mount Bracket with a 4" cup that provides a large surface contact area, and a Shape Rod Block.
Top Plate For Sony Venice With 15mm Lw Front Rod Clamp
The SHAPE Nucleus Trigger Grips Rod Bloc allows you to attach two Tilta Nucleus-M handgrips and adjust them on the fly with SHAPE's famed push-button technology
Top Plate (URSA Mini, URSA Mini Pro / 12K)
Usually ships within 8 to 12 weeks
Unified VCT-14 Tripod Plate
Usually ships within 8 to 12 weeks
The ARRI Top Plate for Panasonic AU-EVA1 is a lightweight support featuring numerous accessory threads and a built-in console for 15 mm LWS rods
This lightweight rod adapter offers 15mm LWS standards to the Compact Bridge plates CBP-1 (19mm) and CBP-2 (15mm) baseplates for ALEXA Mini/ Mini LF.
Vertical Camera Bracket
Usually ships within 8 to 12 weeks
The LLS-1 is a multifunctional solution for lenses with a diameter between 39 mm and 153 mm. It offers a 3/8" and a 1/4" interface for lenses with an included lens support pin. Lenses without a pin, such as an Alura Lightweight Zoom, Prime lenses, or still photo lenses can be supported by using the bracket with plastic support rollers.
The Top Plate is attached to the Extension unit with four screws. It offers plenty of interfaces (3/8-16 and 1/4-20 with anti-twist pin holes; RMB-3; CTH-1; CCH-2 and CCH-4; 15mm LWS Rod Console at the back). It includes an optically centered 15mm lightweight rod support with individual rod clamps. An interface at the back offers the usage of ARRI´s 15mm...
The Rosette Adapter RA-3 adapts the existing handgrip K4.72172.0 and the HEB interface to the Arri rosette style.
ENG STYLE CAMCORDER BASEPLATE
Canon C200 Grip Relocator
Part 1 Riser Set (female)
Usually ships within 6 weeks
50mm Extension piece of Tecnopoint riser
Usually ships within 6 weeks
Rickshaw hardened steel European Coupling
The bracket connects between the camera's original, detachable LCD monitor and your camera to provide additional stability.
Stirrup 4-8 Feet (120-240 Cm)
Mitchell to Elemack Adapter With Castlenut
Mitchell to Elemack/euro Adapter With Castlenut(M12)
Shoulder support for 15mm rails
Spare dovetail plate 295 mm V2
Camera adapter plate that attaches directly under the Arri Alexa 35 allowing our widely available USBP sliding system to be used with this camera.
Handgrip Extension - long
The ARRI Handle for RED DSMC2 features an integrated 15 mm LWS rod console for the mounting of accessories. A handy monitor bracket allows the camera monitor to be repositioned on top-mounted 15 mm LWS rods.
NATO Lock Ultra Arm (8")
Usually ships within 8 to 12 weeks
Canon C200 15Mm Base
Panasonic Au-Eva1 15Mm Base
Stirrup 3-6 Feet (90-180 Cm)
Canon C500 Mark II 15mm Lightweight Baseplate
The kit includes the Top Handgrip Mini and a top cheese-style plate for the C70. The plate mounts on top of the C70 using a 1/4"-20 screw, and it features a shoe mount, 15mm rod ports, and 1/4"-20 and 3/8"-16 accessory threads.
This 15mm Pro Rail Support Type R from Vocas can accommodate medium to large-sized cameras thanks to its durable aluminum camera plate and 15mm rods.
Equiped for optional double 15 mm rail holder (0350-2010) at the front for alternative viewfinder attachment or lens motors. Allows the original Sony handgrip and viewfinder bracket to be used.
Elemack/euro Female Adapter
150mm Bowl Adapter
The Mini Side Bracket MSB-2 offers support for lens motor in configurations that require lightweight baseplates with no rod support, such as lightweight stabilizer systems or drones.
LWS - Light Weight Support 15 HD Sony F5/ F55 w. ? 15 mm rods L. 310 mm, double rod guidance and clamping
19 mm lens support for all lenses. Incl. 4 adapters
LWS Light weight support for DSLR cameras Canon EOS 5D MKII - 7D - 550D & Nikon D90 - D60 - D7000 and others : cpl. with twist stopper + adjustable rods dia 15mm l. 205mm (401-400+401-421P)
Universal 15 + 19mm Lens Support Bracket with 3 support stands - intercombinable - lenght 14 - 27 and 35 mm - for all lenses with 1/4 inches and 3/8 inches threads. With QuickFit device for diameter 15 LWS + 19 mm rods.
Universal 15/19mm Lens Support Bracket with 3 support stands - intercombinable - lenght 14 - 27 and 35 mm (1/4 inches und 3/8 inches threads) - for lenses with knurled terminal screw M5 like Canon HJ40x10 and HJ40x14 (thread M5). With QuickFit device for diameter 15 LWS + 19 mm rods.
DSW 500 Adaptor - Direct Swing-Away System - swing radius 100mm - adaptor for all MB with 15mm rod supports - e.g. MB 456 - MB 450R2 and 450W
Light Weight Support for JVC GY-HM700/750 complete with 2 rods dia. 15mm - length 160mm (compatible to QuickLock tripod plate)
Light Weight Support BTS LDK 100/120/ 6000/7000 incl. 2 allen wrench (for mounting on Quick-lock Plate) - complete with 2 rods dia. 15mm length 205mm
MultiPad 15 Adjustable ShoulderPad complete with MultiPad 15 Straight and Side Lock for use with diameter 15 mm rods. Pad mounts under the camera - behind or sidewards for cameras with viewfinder in the body.
Set Leather Handles - retrectable - swiveling and rotatable handles with HIRTH rosettes connection.