Unified Baseplate (Sony FX9, FS7, FS7mkII, Canon C100mkII, C300mkII, C100, C300, C500)
2 pieces in stock
The Falcon Eyes RC-3T LED Remote Control for RX-TDX, CLL-DR, BL-30TD and SO-TDX Series is suitable for the LED continuous lighting lamps in the RX-TDX, CLL-DR, SO-TDX and LP-TD series.
2 pieces in stock
Fixture Cover for 1x1 Fixtures
5 pieces in stock
The Falcon Eyes Diffusor Dome RX-24OB is an accessory for the Falcon Eyes Flexible LED Panel RX-24TDX.
5 pieces in stock
The Falcon Eyes Diffusor Dome RX-12OB is an accessory for the Falcon Eyes Flexible LED Panel RX-12T.
40 pieces in stock
DYNO 1200C RGBWW Soft Panel Light with Flight case
Auoris Truss Kit, 3 x 3 m (10x10ft), Diffusion/Skirt - Full
Auroris X Diffusion & Skirt - Full, Half, Qtr, 3 x 3 m (10x10ft)
This FreeStyle Air Max RGB LED Light Panel DMX System Universal Travel Kit from Kino Flo is a handy way to store and transport your lighting kit. It features a convenient soft case, a 39.5 x 22 x 2" FreeStyle Air Max fixture, and a compatible 140 LED DMX controller.
Delivery time of 4 to 6 weeks
Auroris X SnapGrid, 60 Degree
DYNO 650C RGBWW Soft Panel Light with Flight case
This FreeStyle Air RGB LED Light Panel DMX System Universal Travel Kit from Kino Flo is a handy way to store and transport your lighting kit. It features a convenient soft case, a 39.5 x 13 x 2" FreeStyle Air fixture, and a compatible 140 LED DMX controller.
Delivery time of 4 to 6 weeks
HS Pole-op Lamphead, incl. head and yoke, no cable, no panels
FreeStyle Air Mini RGB LED Light Panel (DMX System Universal Travel Kit)
Delivery time of 4 to 6 weeks
FABRIC Full Kit (350W Bi-Color) V-Mount with full Kit Case and frame(without dual power & ACAD)
LiteDimmer Spectrum AC600
LiteTile LiteBox 4x8, 6" Depth
Full-Length Led Mirror
28-Pin Header Cable, 30 m (100 ft)
LiteTile LiteBox 2x8, 6" Depth
LiteTile LiteBox 4x4, 6" Depth
The extra large dimensions of the mirrors (0.7 m2) provide a comfortable viewing area. The bicolour LEDs are fully dimmable from 10 to 100 % with a wide colour temperature range of 2700K to 5600K.
The FreeStyle Air Max arrives ready to take its place as a lightweight accessory that integrates seamlessly with existing FreeStyle systems. Compatible with FreeStyle mounts, extension cables and LED-140 & LED-150 Series controllers, this portable thin profile panel offers the advantages of easy deployment and favorable cost of ownership to current...
Delivery time of 4 to 6 weeks
LiteDimmer Plus DC400 DMX, Duo
The large dimensions of the mirror (0.37 m2) provide a comfortable viewing area. The bicolour LEDs are fully dimmable from 10-100 % with a wide colour temperature range of 2700K - 5600K.
This 5 x 4' LS 1200 4-Light Bracket from Aputure allows you to mount up to four LS 1200d Pro LED lights together in a heavy-duty aluminum frame. Designed for filmmakers and lighting technicians who want a single frame for an ultrahigh-powered lighting setup, this bracket combined with four separately available LS 1200d Pro fixtures unleashes up to 4800W...
HS Lamphead and Pole-op Yoke (no cable, no panels)
The large dimensions of the mirror (0.37 m2) provide a comfortable viewing area. The bicolour LEDs are fully dimmable from 10-100 % with a wide colour temperature range of 2700K - 5600K.
The Auroris diffusion and skirt options create soft, even light output and are available in three densities: full, half grid, and quarter grid.
The Auroris diffusion and skirt options create soft, even light output and are available in three densities: full, half grid, and quarter grid.
The Auroris diffusion and skirt options create soft, even light output and are available in three densities: full, half grid, and quarter grid.
LiteTile LiteBox 2x4, 6" Depth
LiteDimmer Plus DC200 DMX, Duo
LiteDimmer Plus AC400 DMX, 400W, AC
LiteDimmer Pocket, Hybrid, 2X8
Parallel Beam Intensifier for DLH400 / DLED9 / DLED10
HS Lamphead only (no yoke, no cable, no panels)
Falcon Eyes RGB LED Panel Desal DS-811 30x30 cm
Usually ships within 2 to 4 weeks
The FreeStyle Air arrives ready to take its place as a lightweight accessory that integrates seamlessly with existing FreeStyle systems. Compatible with FreeStyle mounts, extension cables and LED-140 & LED-150 Series controllers, this portable thin profile panel offers the advantages of easy deployment and favorable cost of ownership to current...
Delivery time of 4 to 6 weeks
Evoke Four-light Frame with Junior Pin
LS Pole-op Lamphead, incl. head and yoke (no cable, no panels)
Set up your SkyPanel S60-RP fixture for green screen applications with this Chroma Green Remote Phosphor Panel from Arri
LiteDimmer Spectrum DC200
Dimmer including Gold Mount Dual Power
Dimmer including V-Mount Dual Power
The make-up mirror can be desk mounted or stand mounted and can be either mains or battery powered.
28-Pin Header Cable, 15 m (50 ft)
LiteDimmer Pro Universal with Wireless
SkyBender for SkyPanel S120
DoPchoice Bracket for 2x S60
Cineo Maverick Lamphead, no yoke, no panels
The FreeStyle Air Mini arrives ready to take its place as a lightweight accessory that integrates seamlessly with existing FreeStyle systems. Compatible with FreeStyle mounts, extension cables and LED-140 & LED-150 Series controllers, this portable thin profile panel offers the advantages of easy deployment and favorable cost of ownership to current...
Delivery time of 4 to 6 weeks
LiteDimmer Plus DC200G, 200W, DC Unit, Gold Mount
LiteDimmer Plus DC200V, 200W, DC Unit, V-Mount
LS Lamphead, no yoke (no cable, no panels)
LiteDimmer Pro Universal
Set up your SkyPanel S30-RP fixture for green screen applications with this Chroma Green Remote Phosphor Panel from Arri.
Dimmer for FABRIC 200W with V-Mount
Dimmer for FABRIC 200W with GoldMount
DoPchoice Snoot for S360-C
Quickly and easily change the color temperature of your SkyPanel S60-RP fixture with this 2700K Remote Phosphor Panel from Arri
Quickly and easily change the color temperature of your SkyPanel S60-RP fixture with this 6500K Remote Phosphor Panel from Arri
Quickly and easily change the color temperature of your SkyPanel S60-RP fixture with this 3200K Remote Phosphor Panel from Arri
Quickly and easily change the color temperature of your SkyPanel S60-RP fixture with this 4300K Remote Phosphor Panel from Arri
Quickly and easily change the color temperature of your SkyPanel S60-RP fixture with this 5600K Remote Phosphor Panel from Arri
LiteDimmer Plus DC100G, 100W, DC Unit, Gold Mount
LiteDimmer Plus DC100V, 100W, DC Unit, V-Mount
Main Dimmer of FBS350BIDIM
Creamsource Mini Daylight Spot LED Engine Upgrade Kit
Usually ships within 3 weeks
Parallel Beam Attachment LED monocolor, 18cm diameter. Fits: DLED12-D, DLED30-D. May be used with DPBA-14HON honeycomb
Parallel beam attachment for DLH1200D and DLH1000T. May be used with DPBA-14HON honeycomb
SkyBender SkyPanel S60
28-Pin Header Cable, 7.5 m (25 ft)
The Falcon Eyes Controller CX-48TDX for RX-48TDX is a separate control unit with V-mount connections which is suitable for the flexible LED panel RX-48TDX.
Usually ships within 2 to 4 weeks
Diffusion Kit S60 (Lite & Heavy Diffusion, Intensifier & Panel Carrying Bag)
LiteDimmer Pro Chroma
The CX-48TDX II from Falcon Eyes is a separate, spare controller that you can use with the flexible, waterproof LED panel RX-48TDX II.
Usually ships within 2 to 4 weeks
Frame Kit for FB2035 include Difuser and Grid
The CX-824 by Falcon Eyes is a separate control unit to control the flexible LED-mat RX-824.
Usually ships within 2 to 4 weeks
The CO-148TDX from Falcon Eyes is a separate control unit to control the Sophiez LED lamp SO-148TDX.
Usually ships within 2 to 4 weeks
4-leaf Barndoor for SkyPanel S120
XS Light Conversion kit (for 2x HS with existing yokes)
Parallel beam attachment for Series 400/402 and DLED9 light heads. Less than 4 degree beam angle in flood position
Two removable wings to be added to both sides of your GMK STUDIO 2
Commonly used with lights hanging overhead on poles or a grid, the Rotolight Pole Yoke for X2 LED Light replaces the standard yoke and allows the control of pan and tilt functions from underneath the X2 with an optional long pole that engages color-coded cups on the yoke. The blue cup controls panning, and the white cup the tilting adjustments.
Usually ships within 2 to 3 weeks
FlexDoor for SkyPanel S120
SkyBender SkyPanel S30
The Pole-Operated Yoke for Titan X1 LED Light from Rotolight enables the fixture to hang from a lighting grid within a studio via the Junior pin attached to the yoke. The light can be positioned precisely by engaging the cups located at the bottom of the assembly with a long pole from below. The blue cup directs the left and right pan, and the white cup...
Usually ships within 2 to 3 weeks
Dimmer for BI-FLEX M3, M7 with Gold Mount
Dimmer for BI-FLEX M3, M7 with V-Mount
The Standard Yoke for Titan X2 LED Light from Rotolight has four mounting points and a stabilizing bar to provide the center of gravity, ensuring balanced support regardless of how the light is positioned. The yoke has a 1 1/8" pin that can be used to mount the X2 on a stand with a matching receiver or hung from a clamp with a Junior receiver.
Usually ships within 2 to 3 weeks
28-Pin Header Cable, 4 m (13 ft). 28-Pin power and data cable for the Auroris and LiteDimmer Spectrum AC600. The 28-pin head cable distributes power and data evenly for up to 12 light engines.
FlexDoor SkyPanel S60
Quickly and easily change the color temperature of your SkyPanel S30-RP fixture with this 2700K Remote Phosphor Panel from Arri
Quickly and easily change the color temperature of your SkyPanel S30-RP fixture with this 4300K Remote Phosphor Panel from Arri.
Quickly and easily change the color temperature of your SkyPanel S30-RP fixture with this 5600K Remote Phosphor Panel from Arri.
Quickly and easily change the color temperature of your SkyPanel S30-RP fixture with this 6500K Remote Phosphor Panel from Arri.
Quickly and easily change the color temperature of your SkyPanel S30-RP fixture with this 3200K Remote Phosphor Panel from Arri.
FlexDoor SkyPanel S30
FreeStyle Air Max Louver, 40 degree
Delivery time of 4 to 6 weeks
Diffusion Kit S30 (Lite & Heavy Diffusion, Intensifier & Panel Carrying Bag)
Falcon Eyes Control Unit CX-36TDX for RX-36TDX
Usually ships within 2 to 4 weeks
FreeStyle Air Max Frame & DFS
Delivery time of 4 to 6 weeks
HS Light Pole-op Conversion Kit (incl. 900.0069 hardware mounting kit)
Double Vertical Yoke for SkyPanel S120
Falcon Eyes Control Unit CO-108TDX for RX-108TDX
Usually ships within 2 to 4 weeks
Snapbag softbox fits only Gemini 1x1
The CX-36TDX II from Falcon Eyes is a separate, spare controller that you can use with the flexible, waterproof LED panel RX-36TDX II.
Usually ships within 2 to 4 weeks
Polarizing filter foils for 5640 and 5652
The CX-818 of Falcon Eyes is a spare controller for the Falcon Eyes RX-818. With the controller the light intensity is infinitely adjustable up to 100%.
Usually ships within 2 to 4 weeks
Featuring fast, snap-on attachment and a 4-leaf design, the Barndoor Set for Titan X2 LED Soft Light from Rotolight allows you to shape its beam spread by swinging one or more leaves into the beam path to allow selective lighting of the subject.
Usually ships within 2 to 3 weeks
Cineo Maverick DMX Adapter
HS Space Light Conversion Kit
SPACE Skirt and Target
Barn Doors, 4 way, fits Gemini 1x1
LiteMat 8 PolySkirt
Falcon Eyes Control Unit CX-718 for RX-718
Usually ships within 2 to 4 weeks
FreeStyle Air Louver, 40 degree
Delivery time of 4 to 6 weeks
Fits common Rectangular 2x1 LED Panels e.g. ARRI SkyPanel S60, CINEO HS and many more
SnapGrid 40 degree eggcrate, fits on front of SnapBag for Gemini 1x1 (fits on SnapBag, not directly on Gemini 1x1 fixture)
Falcon Eyes Control Unit CX-24TDX for RX-24TDX
Usually ships within 2 to 4 weeks
FreeStyle Air Frame & DFS
Delivery time of 4 to 6 weeks
The Barndoor Set for Titan LED Light from Rotolight mounts quickly and has a quick release function that allows removal in seconds. The barndoors have a 4-way design to facilitate shaping the beam of light. Simply swing one or more leaves into the beam's path to light areas you want and keep illumination from other areas,
Usually ships within 2 to 3 weeks
Evoke Two-light Frame with Junior Pin
Dyno 1200C 10M Connector Cable
Honeycomb for (medium) LEDRAMA LED panels. DLRM-BRK required
Delivery time of 4 to 6 weeks
The Double Vertical Yoke allows for mount two SkyPanel S60 fixtures one directly above the other.
Softbox for TruColor LS. Includes baffles, rods, speed ring, and storage bag.
The Arri 4-Leaf Barndoors for LED SkyPanel S60 is a lightweight accessory that helps diminish spill light and control the beam spread of the S60 LED panel
The Standard Yoke for Titan X1 LED Light from Rotolight has a 1 1/8" pin that allows it to be mounted on a stand with a matching receiver or hung with a C-clamp from a truss, pipe, or grid. The yoke is secured with four mounting points and features a stabilization bar to provide the optimal center of gravity for the fixture.
Usually ships within 2 to 3 weeks
Evoke Quick-Release Clamp
Fits Gemini only
Wired Dimmer for ALL-IN Sires with DMX and Built in Lumenradio
MOSAIC Wired Dimmer for MOSAIC series with DMX and built-in Lumenradio
LiteMat 8 Full Diffuser
LiteMat 8 Half Diffuser
LiteMat 8 Quarter Diffuser
The CO-48TDX of Falcon Eyes is a spare controller of the Falcon Eyes SO-48TDX II. With the controller you can adjust the light steplessy up to 100%.
Usually ships within 2 to 4 weeks
Creamsource Barn Door
Usually ships within 3 weeks
Honeycomb for small LEDRAMA LED panels. DLRM-BRK required
Delivery time of 4 to 6 weeks
Parallel Beam Attachment, LED bicolor, 7cm diameter. Fits: DLED4-BI
Frame for FB2035
Fits Gemini only
V Mount with clamp to mount to lighting stands
LS Light Pole-op Conversion Kit (incl. 900.0069 hardware mounting kit)
AC Adapter
Anton/Bauer QRC-LG Gold Mount with Stand Clamp
SkyPanel Center Mount Handling Kit (including Center Mount Yoke and SkyPanel Side Handles)
The Center Mount Yoke is a ball-in-socket yoke that allows for positioning the SkyPanel in almost any orientation including vertically.
Parallel Beam Attachment LED monocolor, 7cm diameter. Fits: DLED4-D, DLED4-T, DLED7-D, DLED7-T
Delivery time of 4 to 6 weeks
The Falcon Eyes Product Photo Set with a Photo tent of 75x75x75 and Lighting 1600W is the perfect solution for photographing many different kinds of products, such as glass, plastic, jewellery, watches, ceramics and electronics.
Usually ships within 2 to 4 weeks
Parallel Beam Attachment LED, 6cm diameter. Fits: DLED2-BI, DLED3-BI, DLED3-D. May be used with DPBA-7HON honeycomb
Falcon Eyes Control Unit CX-29TDX for RX-29TDX
Usually ships within 2 to 4 weeks
SnapGrid 40 degree eggcrate, fits directly on front of Gemini 1x1
SkyPanel Remote
1x1 4-Way Barndoors
Designed to mount directly on the fixture, the 30° Honeycomb Grid for Titan X2 from Rotolight narrows the beam spread, eliminates spill light, and enables selective lighting.
Usually ships within 2 to 3 weeks
Designed to mount directly on the fixture, the 60° Honeycomb Grid for Titan X2 from Rotolight narrows the beam spread, eliminates spill light, and enables selective lighting.
Usually ships within 2 to 3 weeks
FreeStyle Air Mini Louver, 40 degree
Delivery time of 4 to 6 weeks
Falcon Eyes Control Unit CO-68TD for RX-68TD
Usually ships within 2 to 4 weeks
LiteDimmer Micro Hybrid
Extra Diffusion Slot for SkyPanel S120
FreeStyle Air Mini Frame & DFS
Delivery time of 4 to 6 weeks
Parallel beam attachment for Series 200 and DLED4 light heads. Less than 4° beam angle in flood position.
Delivery time of 4 to 6 weeks
Fits directly on all Astra models (no adapter frame needed)
Soft case for 3 Fellonis
The 4-leaf barndoor for the S30 allows for control of light spill and narrowing of the beam angle.
Creamsource Mini Barn Door
Usually ships within 3 weeks
Parallel beam intensifier for Series 200 and DLH4 light heads. Less than 4° beam angle in flood position. (old code: DPBA)
Falcon Eyes Control Unit CX-18TD for RX-18TD
Usually ships within 2 to 4 weeks
HS Snap Grid 90° Soft Louver
Honeycomb 60 degrees, fits Gemini 1x1
The Gemini 2x1 Heavy Diffuser from Litepanels slides directly into the Gemini 2x1 accessory rails and provides a thick layer of diffusion. It creates a wide beam angle and drastically softens the light for a pronounced and dramatic effect.
1x1 Anton/Bauer Gold Mount Battery Adapter Plate
The Gemini 2x1 Medium Diffuser from Litepanels offers a moderate level of diffusion and widens the beam angle of the LED panel. Featuring an easy-to-use design, it slides directly into the Gemini 2x1 accessory rails and softens the light while letting you maintain high output.
The Gemini 2x1 Ultralight Diffuser from Litepanels clips into the Gemini 2x1 accessory rails and provides a very thin layer of diffusion to the LED panel.
The Gemini 2x1 Light Diffuser from Litepanels clips into the Gemini 2x1 accessory rails and provides a thin layer of diffusion to the LED panel.
1x1 V-Mount Battery Adapter Plate
The Gemini 2x1 Super Ultralight Diffuser from Litepanels slides directly into the Gemini 2x1 accessory rails and provides extremely light diffusion while letting you maintain a very high light output.
Full Kit Bag for FBS2035
LS Snap Grid 90º Soft Louver
Cineo Maverick Yoke Assembly
Works with all original 1x1 models and Astra models (in conjunction with 900-3520 Astra Accessory Adapter Frame).
1x1 Honeycomb Grid - 60 Degree
Fits directly on all Astra models (no adapter frame needed)
1x1 Honeycomb Grid - 30 Degree
1x1 Honeycomb Grid - 45 Degree
The CX-18TDX II from Falcon Eyes is a separate, spare controller that you can use with the flexible, waterproof LED panel RX-18TDX II.
Usually ships within 2 to 4 weeks
The 60° Honeycomb Grid for Titan X1 Light from Rotolight is a rigid modifier that narrows the X1's beam spread, eliminates spill light, and allows the directional control necessary for selective lighting.
Usually ships within 2 to 3 weeks
The 30° Honeycomb Grid for Titan X1 Light from Rotolight is a rigid modifier that narrows the X1's beam spread, eliminates spill light, and allows the directional control necessary for selective lighting.
Usually ships within 2 to 3 weeks
The CO-48TDX of Falcon Eyes is a spare controller of the Falcon Eyes SO-48TDX II. With the controller you can adjust the light steplessly up to 100%.
Usually ships within 2 to 4 weeks
LiteMat 4 PolySkirt
LiteMat 3 PolySkirt
Parallel Beam Attachment LED monocolor, 6cm diameter. Fits: DLED2-D. May be used with DPBA-7HON honeycomb
The Aputure Nova P600c Barndoors are a four-leaf light control accessory specially designed for this RGBWW LED soft panel light, allowing users to quickly minimize excess spill light and adjust the fixtures illuminance area.
Fixture cover for Dyno 1200C
Dyno 650C Diffuser C Version
DMX Dimmer Pack, E-Control, 4X4-V3.1
DMX Dimmer Pack, E-Control, 6X6-V2
Cineo Maverick 4-leaf Barn Door set
Fixture cover to protect Gemini from dust and elements
Falcon Eyes Control Unit CX-12TD for RX-12TD
Usually ships within 2 to 4 weeks
LiteMat 2 PolySkirt
LiteMat 2L PolySkirt
T2880LMC Honeycomb Louver
Honeycomb for DPBA-14 attachment
The Barndoors for Dyno 1200C LED Light from NanLux have a 4-way design designed to control the fixture's output to light the areas you want to have illuminated while keeping light from the areas you don't by swinging one or more leaves into the light's beam.
Falcon Eyes Control Unit CO-48TD for RX-48TD
Usually ships within 2 to 4 weeks
Wireless Remote Controller for ALL-IN- Series
Wireless Transmitter / control unit
The Aputure 2-Bay Battery Power Station converts standard 14.4V V-Mount or Gold Mount Batteries to a 48V DC output, allowing users to deliver battery power to any 48V compatible fixture, including the Nova P300c & Amaran COB lights.
Fixture cover for Dyno 650C
Grid for FB2035
Singel soft case for 1 Felloni
Barn Door for Nova P300c
Spreading optical attachment for Ledrama medium incl. set of brackets (DLRM-BRK)
Delivery time of 4 to 6 weeks
SnapBag cloth set, fits Gemini 1x1 Snapbag, includes 1/4, 1/2, full diffusion
LiteTile LiteBox Tube, 96 in. Length
DMX Attachment for BI-FLEX M3, M7
Protection bag for GlassMak Studio.
The CX-12TDX II from Falcon Eyes is a separate, spare controller that you can use with the flexible, waterproof LED panel RX-12TDX II.
Usually ships within 2 to 4 weeks
Dyno 650C 10M Connector Cable
DMX attachment for ALL-IN-Series
Frame 1x1' with Ball Mount and Diffusor
Sitting further away from the LEDs than a standard clip-in diffuser, the Gemini 2x1 Domed Diffuser from Litepanels slides directly into the Gemini 2x1 accessory rails and provides a wide beam angle while softening the light and reducing hot spots.
The S30 Extra Diffusion Slot slides into the primary accessory slot of the SkyPanel and allows for stacking for multiple diffusors.
The Barndoors for Dyno 650C LED Light from NanLux have a 4-way design designed to control the fixture's output to light the areas you want to have illuminated while keeping light from the areas you don't by swinging one or more leaves into the light's beam.
Falcon Eyes Control Unit CX-18T for RX-18T
Usually ships within 2 to 4 weeks
Designed specifically for the Dyno fixture, the 4' Rectangular Softbox for Dyno 650C LED Light from Nanlux softens the output and lowers the contrast of the light's bright LEDs.
The S60 Extra Diffusion Slot slides into the primary accessory slot of the SkyPanel and allows for stacking for multiple diffusors.
LiteMat 4 Parasquare Louver
LiteMat 1 PolySkirt
60 degree Honeycomb.
Diffuser frame turns the Brick Bicolor into a soft broad bicolor light.
Ultra Light diffusion panel, fits Gemini 1x1
Honeycomb for DPBA-7 attachment
Honeycomb for DPBA-1419 intensifier
Honeycomb for DPBA-1821 and DPBA-L1821 intensifier
Bluetooth Dongle, Fits Gemini and Lykos
Cineo Cineo 90 degree Louver
LiteTile LiteBox Side, 96 in. x 6 in., Solid
LiteMat 3 Parasquare Louver
GlassMak holder
Honeycomb Grid for TK-280B/TK-450
The BD-DS811 from Falcon Eyes is a metal valve set for your DS-811. With a valve set you can control the light more.
Usually ships within 2 to 4 weeks
The HC-DS812 by Falcon Eyes is a handy accessory for your DS-812 that lets you control the light. The honeycomb can be used to spread the light less widely.
Usually ships within 2 to 4 weeks
Digital DMX Dimming Module LCD Display for Felloni
Diffusion foil 60 x 760 cm
LiteMat 2L Parasquare Louver
LiteMat 2 Parasquare Louver
Diffuser for FB2035
The CX-12T of Falcon Eyes is a spare controller of the Falcon Eyes RX-12T.
Usually ships within 2 to 4 weeks
LiteTile LiteBox Tube, 48 in. Length
The Fixed Center Mount Yoke is a fixed 28 mm spigot that allows for direct attachment from the back of the SkyPanel to mounting hardware.
The RC-7 by Falcon Eyes is a wireless remote control that allows you to centrally control Falcon Eyes LED lights with scene effect modes
Usually ships within 2 to 4 weeks
Falcon Eyes LED Remote Control RC-5
Usually ships within 2 to 4 weeks
Cineo Maverick Backpack Accessory Bracket
RJ45 to 5-Pin XLR (Male) Conversion Cable
and baby pin (5/8 inches). Extends from 2 ft 5 in to 8 ft 6 in (73 cm to 259 cm).
The Falcon Eyes LED Remote Controller RC-5B II is suitable for flexible LED lamps with DMX connection
Usually ships within 2 to 4 weeks
RP Panel Pouch
FreeStyle Air Max DFS (Full)
Delivery time of 4 to 6 weeks
FreeStyle Air Max DFS (Quarter)
Delivery time of 4 to 6 weeks
FreeStyle Air Max DFS (Half)
Delivery time of 4 to 6 weeks
Dome diffusion panel, fits Gemini 1x1
LiteMat 4 Half Diffuser
LiteMat 4 Quarter Diffuser
LiteMat 4 Full Diffuser
Bi-Flex 100 Grid
Gooseneck Yoke central Mount for TK
For convenient control of one or several NanGuang lights with integrated radio receiver. Operation modes Bi-Color-A and Bi-Color-B allow for wireless control of brightness and color temperature, Single-Color for brightness only
1x1 Power Supply Mounting Bracket
Latching Hanging Bracket for Cineo Power Supplies
The RC-6 from Falcon Eyes is a wireless LED remote control, which allows you to easily control your LED lamps centrally.
Usually ships within 2 to 4 weeks
AC Adapter for BI-FLEX M3, M7
Dyno 650C 5M AC Cable
Cineo Maverick Gel Frame
LiteMat 3 Half Diffuser
LiteMat 3 Full Diffuser
LiteTile LiteBox Side, 48 in. x 6 in., Solid
LiteMat 3 Quarter Diffuser
For mounting the 1x1 Barn Door or a 1x1 Honeycomb
Radio Controler with Receiver
Usually ships within 3 to 6 weeks
7W RGBWW Smart Bulb
The Falcon Eyes Case BGE-12L is suitable for the flexible LED panels of Falcon Eyes. This case offers you enough space to store the flexible LED panels safely.
Usually ships within 2 to 4 weeks
Falcon Eyes LED Remote Control RC-3L for LP-CTR Series
Usually ships within 2 to 4 weeks
Falcon Eyes' RX-24SB+HC III consists of a softbox, diffusion fabric and a honeycomb. This accessory set is designed for the flexible LED panel RX-24TDX III
Usually ships within 2 to 4 weeks
LiteTile LiteBox Tube, 24 in. Length
double handle
Mini V-Mount Plate with white connector Fits MFL357
Honeycomb Grid for TK-140B/TK-200
PowerTap Extension - 7 foot cable with PowerTap Male to PowerTap Female
LiteMat 2 Quarter Diffuser
LiteMat 2L Half Diffuser
LiteMat 2L Full Diffuser
LiteTile LiteBox Side, 24 in. x 6 in., Solid
LiteMat 2 Half Diffuser
LiteMat 2 Full Diffuser
LiteMat 2L Quarter Diffuser
FreeStyle Air DFS (Quarter)
Delivery time of 4 to 6 weeks
FreeStyle Air DFS (Half)
Delivery time of 4 to 6 weeks
FreeStyle Air DFS (Full)
Delivery time of 4 to 6 weeks
Honeycomb
FreeStyle Tube Ball Mount
Delivery time of 4 to 6 weeks
1x1 D-Tap Power Cable for Battery Adapter Plates - 6 in (15 cm)
HS / LS Replacement yoke hardware, no yoke
Digital LCD Display for Felloni
Standard Dimmer - Manual operation (spare part)
The Falcon Eyes Diffuser Dome RX-24OB II for RX-24TDX II is a diffuser dome specially developed for the Falcon Eyes LED Panel RX-24TDX II.
Usually ships within 2 to 4 weeks
FreeStyle Tube Floor Stand
Delivery time of 4 to 6 weeks
Holographic filter X-BRICK 10°
Holographic filter X-BRICK 60° H x 30° V
Holographic filter X-BRICK 60°
Holographic filter X-BRICK 80°
Holographic filter X-BRICK 60° H x 10° V Included in the cardboard box.
Holographic filter X-BRICK 20° Included in the cardboard box.
Holographic filter X-BRICK 40° Included in the cardboard box.
LiteMat 1 Parasquare Louver
HS/LS Pole Op Hardware Mounting Kit
MOSAIC Wired dimmer extension Cable (3m / 9.8ft)
This SP-XC10TA Extension cable from Falcon Eyes is 10 meters long and is made for the LED lamps from the RX-TDX III series.
Usually ships within 2 to 4 weeks
Creamsource Gel-Frame (Empty)
Usually ships within 3 weeks
Wireless Receiver to mount on to Felloni instead of regular dimmer
SkyPanel Adapter Kit for Motorization
Falcon Eyes Diffusor Dome RX-18OB for LED RX-18T
Usually ships within 2 to 4 weeks
The Falcon Eyes Diffuser Dome RX-18OB II for RX-18TDX II is a diffuser dome specially developed for the Falcon Eyes LED Panel RX-18TDX II.
Usually ships within 2 to 4 weeks
Holographic filter BRICK 20°. To be mounted on UN (ULTRANARROW) lens
Holographic filter BRICK 40°. To be mounted on UN (ULTRANARROW) lens
Holographic filter BRICK 60° H x 10° V. To be mounted on UN (ULTRANARROW) lens
Holographic filter BRICK 10°. To be mounted on UN (ULTRANARROW) lens. To be mounted on UN (ULTRANARROW) lens
Holographic filter BRICK 60°. To be mounted on UN (ULTRANARROW) lens
Holographic filter BRICK 60° H x 30° V. To be mounted on UN (ULTRANARROW) lens
Holographic filter BRICK 80°. To be mounted on UN (ULTRANARROW) lens
FreeStyle Air Mini DFS (Half)
Delivery time of 4 to 6 weeks
FreeStyle Air Mini DFS (Quarter)
Delivery time of 4 to 6 weeks
FreeStyle Air Mini DFS (Full)
Delivery time of 4 to 6 weeks
Super Clamp for Dyno
LiteMat 1 Half Diffuser
LiteTile LiteBox Grip Head Mount (includes Two Knobs)
LiteMat 1 Full Diffuser
LiteMat 1 Quarter Diffuser
Falcon Eyes Power Supply SP-AC15
Usually ships within 2 to 4 weeks
The Falcon Eyes Diffuser Dome RX-24OB III for RX-24TDX III is a diffuser dome especially developed for the Falcon Eyes LED panels RX-24TDX III and RX-824-K1.
Usually ships within 2 to 4 weeks
SkyPanel Side Handles (2 pcs.)
TVMP Replacement with T-Handle
Safety cable (10 mm) 1 m, max. load 100 kg
LiteTile LiteBox Tube, 6 in. Length
or rigging and safety, a 30" black safety cable with 5/16" spring hook is included with the Auroris fixture.
Diffuser for Micro Flex M3
Holographic filter MINI BRICK 80°. To be mounted on UN (ULTRANARROW) lens
Holographic filter MINI BRICK 60° H x 30° V. To be mounted on UN (ULTRANARROW) lens
Holographic filter MINI BRICK 60°. To be mounted on UN (ULTRANARROW) lens
Holographic filter MINI BRICK 10°. To be mounted on UN (ULTRANARROW) lens. To be mounted on UN (ULTRANARROW) lens
Holographic filter MINI BRICK 60°Hx10°V. To be mounted on UN (ULTRANARROW) lens
Holographic filter MINI BRICK 40°. To be mounted on UN (ULTRANARROW) lens
Holographic filter MINI BRICK 20°. To be mounted on UN (ULTRANARROW) lens
Standard 6 ft (1.8m) US Power Cord
Standard 8 ft (2.4 m) EU Power Cord (Schuko)
Safety cable (8 mm) 1 m, max. load 64 kg
Safety cable (6 mm) 1 m, max. load 36 kg
Antenna for FBS350BIMADIM and FBS200BIDIM
Remote control
Usually ships within 3 to 6 weeks
RGB Remote control
Usually ships within 3 to 6 weeks
Dimmer hanger for MFL70DIM
Safety cable (5 mm) 1 m, max. load 25 kg
Falcon Eyes Diffuser + Honeycomb Grid F7-DF+HC for PockeLite F7
Usually ships within 2 to 4 weeks
Adjustable Handle 110-47 Right Handle Dyno1200
Adjustable Handle 110-25 Left Handle Dyno 1200
Suitable for NanGuang P100WII LED Studio Light (3670). For mounting the NanGuang Folding Soft Box 3667
Mirror 8 inches dual-side
Usually ships within 3 to 6 weeks
BM1 Bulb Mount Box
Usually ships within 4 to 6 weeks
LiteDimmer Plus Handle Assembly
The Nanlite Multi-Angle Mounts are a pair of mounts compatible with the Nanlite PavoTube II 15X, 30X, and 60X LED tube lights. They allow you to securely hang the lights at different angles. The pair of mounts attach to the 1/4"-20 receivers on the back of the PavoTubes.
Usually ships within 3 to 6 weeks
Safety cable (3 mm) 0,6 m, max. load 5 kg
Mirror 7 inches one-sided
Usually ships within 3 to 6 weeks
Ac Adapter Holder with V-Mount
This article is a spare antenna and is suitable for the Falcon Eyes LED lamps of the Sophiez, the flexible RX panel en LPL series.
Usually ships within 2 to 4 weeks
Eyebolts (2 pieces)
Connect 2 HydraPanels together to form a bigger panel with more punch. Backside 1/4" thread.
100-Degree Soft Frame for FP6 HydraPanel
BM1 Bulb Mount
Usually ships within 4 to 6 weeks
HydraPanel DiffusorSheet 100
HydraPanel GelHolder
Gives a black surface so that it can blend into dark environments
XS Light: Double HS fi xture, incl. double yoke and 2 HS Lampheads, no cable, no panels
Hanging cable
Usually ships within 3 to 6 weeks
Stand adapter knob