Filter
Astera developed a wireless lighting system to make your event setup faster and easier to manage. Spotlights can be used to wash walls, lights can be used indoors and outdoors and work wirelessly as well as when hardwired for bigger or longer events.&
Astera developed a wireless lighting system to make your event setup faster and easier to manage. Spotlights can be used to wash walls, lights can be used indoors and outdoors and work wirelessly as well as when hardwired for bigger or longer events.
Bag consisting of 8 x titan tube,1 x powerbox, 8 x stand, 16 x spigot, 16 x screw rings, 16 x holder + clips
Astera Helios Tube Set. Also for outdoor using: IP65, TLCI: >96, CRI: >96, reflection angle: 180°, Using time: 5-20 Hours, Tube Dimension: 550 x 42,6mm x 42,6 mm
This Set of 4 Hyperion 66.4" LED Tubes with Charging Case from Astera is an impressive setup designed to travel. The set includes four Hyperion LED lights, a hard, shippable charging case, four multi-voltage AC adapters, and a Data Link to translate XLR-DMX, Art-Net, and sACN protocols to DMX.
Astera PixelBrick Set, 15 W, RGBMintAmber
The 8-Light AX3 LightDrop LED Kit with Charging Case from Astera is a self-contained location lighting solution in a durable travel case. The travel-rated case has a fitted foam interior to store and protect eight AX3 LightDrop LED lights during transport and then charge them for use anywhere in the world.
The FP6 HydraPanel LED 4-Light Kit with Charging Case from Astera features the compact 6.5 x 3.3 x 1.7" panel designed for in the studio or on location. It suits film, studio, and stage applications for direct or indirect illumination of people, objects, or scenery. The adjustable color temperature ranges from 3200 to 6500K and it has a high CRI/TLCI of...
Astera has put together this PowerStation Set to provide shooters with all the hardware they'll need to employ eight NYX RGM bulbs on the shoot. The kit includes 8 x PowerStations, 8 x PowerStation Hangers, 8 x TrackPins, 8 x lamp sockets, 8 x Bridge Cables, 1 x PSU, and 1 x DC SplitCable. A travel case is included for storage and transport.
Built for versatility and high performance, the Astera AX2-100 PixelBar is a 40" long wireless linear wash fixture equipped with 16 individually controllable pixels, 21° lenses from Gaggione, and the TITAN LED Engine, rendering it a highly capable LED bar for concerts, tours, corporate events, and more.
CRi> 96, integrated CRMX, RF and Bluetooth receiver, case with 8 NYX bulbs, 1 PowerStation, 8 CupBouncers, 8 USB cable, 1 x power supply 48VDC
Store, transport, protect, and charge up to eight Titan Tube lights at once in this black Astera Charging Case. The case features a top handle and a latch closure.
Astera PixelBrick accessory set
Store, transport, protect, and charge up to eight AX3 fixtures at once in this black Wheeled Helios Charging Case. The case features an interior with foam and divider, a top handle, and a latch closure.
With an omni-directional 180° beam spread, the Astera Hyperion LED Tube is ideal for creating a soft direct light on your subject, for use as an accent light, or as a design element on location or on set. Suitable for cine, theatrical, and event productions, the wireless tube is powered by an integrated LG Chem li-ion battery that will give you two hours...
Astera AX9 charging case
The AX9 utilizes the AX5s successful 3-in-1 concept which allows it to be used as wireless light and elegant uplight as well as a wired PAR light for longer or bigger installations. This makes it an extremely cost-efficient light and keeps your investment to a minimum.
Built for versatility and high performance, the Astera AX2-50 PixelBar is a 20" long wireless linear wash fixture equipped with eight individually controllable pixels, 21° lenses from Gaggione, and the TITAN LED Engine, rendering it a highly capable LED bar for concerts, tours, corporate events, and more.
Store, transport, protect, and charge up to eight AX1 PixelTubes at once in this black Astera AX1 Wheeled Charging Case. The case features an interior divider, two handles, and a latch closure.
Store, transport, and protect your Hyperion light fixtures with this black Hyperion Case from Astera.
RuntimeExtender V-Mount, case with 4 pcs.
Astera AX2 Charging Case 100
AX2 Charging Case 50
The Astera AX5 TriplePAR is an RGBAW LED fixture with 3 x LED emitters and a 13° beam spread. The RGBA fixture supports a color temperature range of 2480 to 7100K when controlled via the app or DMX, and features a CRI rating of up to 92. In addition, the fixture is dimmable from 100 to 0% brightness in any mode.
Astera Titan Tube, 72 W / 16 Pixel Segment, RGBMA. The new Titan Tube was specially developed for film and television lighting. It has been optimized for a very high TLCI and also offers a high CRI and an enormous brightness.
The PowerBox for Titan Tubes charges eight LED tubes simultaneously, although up to ten Titan Tubes can be connected to each PowerBox with a special power+data cable. The maximum cable length is 49'. The PowerBox has a powerCON True1 input and output and a 5-pin XLR input and output, while it also has an RJ45 port for Art-Net and sACN protocols whose...
Astera Helios Tube, 36W/8 Pixel, RGBMA IP65 (Spare Tube)
Astera PixelBrick charging case with PowerBox
Astera AX1 Wireless Pixel Tube, 16 W LED RGBW IP65 (Spare Tube)
Astera PixelBrick PowerBox 2x 86W
The AX1 Charging Box from Astera will power 8 AX1 PixelTube integrated batteries in 5 to 7 hours. It accepts 110 to 240 voltage.
Astera NYX PowerStation empty case
The FP6 HydraPanel LED Light with Case from Astera features the compact 6.5 x 3.3 x 1.7" panel designed for in the studio or on location. It suits film, studio, and stage applications for direct or indirect illumination of people, objects, or scenery. The adjustable color temperature ranges from 3200 to 6500K and it has a high CRI/TLCI of 96 for color...
Store, transport, protect, and charge up to eight AX3 fixtures at once in this black Astera Charging Case. The case features an interior with foam and divider, a top handle, and a latch closure.
Astera PixelBrick, 15 W, RGBMintAmber
The FP6 HydraPanel LED Light from Astera features the compact 6.5 x 3.3 x 1.7" panel designed for in the studio or on location. It suits film, studio, and stage applications for direct or indirect illumination of people, objects, or scenery. The adjustable color temperature ranges from 3200 to 6500K and it has a high CRI/TLCI of 96 for color accuracy.
The ultra-compact, yet powerful Ax3 LightDrop Battery-Powered LED from Astra is a highly advanced wireless LED spotlight for event lighting, with a 15W RGB LED that makes it possible to reproduce millions of colors with a high degree of accuracy, and control brightness seamlessly.
The FP6 HydraPanel LED 4-Light Kit with Charging Case from Astera features the compact 6.5 x 3.3 x 1.7" panel designed for in the studio or on location. It suits film, studio, and stage applications for direct or indirect illumination of people, objects, or scenery. The adjustable color temperature ranges from 3200 to 6500K and it has a high CRI/TLCI of...
AsteraBox - CRMX ART7, with Bluetooth-Connection to operate the Astera Systems via App. AsteraBox CRMX is the interface between lights and controller. It can be used as a wireless DMX transmitter with CRMX technology and also works as interface between app and lights.
Sold in quantities of eight, the Volcano Covers for AX5 TriplePAR LED Light from Astera narrow the light's beam spread while hiding the LEDs from sight and allowing the fixture to blend into light-colored or white sets or stages.
This 49.2' Titan Extension Cable 8-Pack from Astera allows connection of eight Titan tubes to the PowerBox for charging and data connection.
Connection cable 15 m to Titan Tube Powerbox, set of 8 pieces.
Astera NYX Bulb empty case with accessories
The NYX Bulb Transportation Case from Astera is a corrosion-proof hard case used to carry equipment that needs to be protected from the elements. More specifically, the case is designed for eight NYX bulbs, one power supply, eight cup bouncers, and one 48VDC PSU (sold separately).
Store, transport, and protect up to 4 Titan tubes and related accessories with this black Softbag from Astera. The bag features exterior pockets and dual connecting strap handles.
This 32.8' Titan Extension Cable 8-Pack from Astera allows connection of eight Titan tubes to the PowerBox for charging and data connection.
Connection cable 10 m to Titan Tube Powerbox, set of 8 pieces.
Astera Datalink
Astera Runtime Extender REX1-VM is a battery plate to connect standard camera batteries to many Astera lights.
Designed for the NYX LED bulb, the PowerStation with Built-In Battery from Astera acts as a remote display to make settings such as color temperature, effects, and brightness that the bulb will display when connected to a powered lamp socket or PowerStation. The PowerStation will also display DMX addresses and settings that the bulb will then store in its...
Store, transport, and protect up to 4 Helios tubes and related accessories with this black Softbag from Astera. The bag features exterior pockets and a shoulder strap.
This mirror Flex Cover (8-pack) from Astera is designed for the AX9 PowerPAR spotlight. Each cover measures 27 x 8.3" and can be wrapped around the fixture once its bracket has been removed. The bracket attaches via hook-and-loop closure and is used to change the look and color of your AX9.
This white Flex Cover (8-pack) from Astera is designed for the AX9 PowerPAR spotlight. Each cover measures 27 x 8.3" and can be wrapped around the fixture once its bracket has been removed. The bracket attaches via hook-and-loop closure and is used to change the look and color of your AX9.
Astera NYX Bulb, 10 W RGBA + Mint, housing black
Astera NYX Bulb, 10 W RGBA + Mint
Astera AX2 Flybar
Sold only in packs of eight, this Set of 8 Mirrored Flex Covers for AX5 TriplePAR LED Light from Astera are for cosmetic use on one or more fixtures for striking, eye-catching effect on flashy stage or set productions.
Sold only in packs of eight, this Set of 8 White Flex Covers for AX5 TriplePAR LED Light from Astera are for cosmetic use on one or more fixtures to cause them to blend in on a white or light-colored stage or set.
Breakout cable to AX2 Case Powercon True1 to 4 x Powercon True1
NYX Bulb Home Set (1 x FP5-E27 + 1 x CupBouncer)
This 16.4' Titan Extension Cable 8-Pack from Astera allows connection of eight Titan tubes to the PowerBox for charging and data connection.
Connection cable 5 m to Titan Tube Powerbox, set of 8 pieces.
HydraPanel Single Unit Case
BasePlate to support PixelBrick shapes, can be placed on floor or attached to truss tops.
The Individual Charger/PSU for Hyperion Tube from Astera provides power to the Hyperion Tube's Li-Ion battery. The charger takes 3 hours for a full charge.
Astera AX2 JumpCable
Diffuser dome for AX5 (diameter 25cm)
Narrow the beam angle and control light spill on your AX9 PowerPAR with this Eggcrate Grid from Astera. It easily attaches directly to the light and is designed with round holes that perfectly match the LED optics of the fixture.
The AX2-100-BD Barndoor for PixelBar AX2-100 LED Bar from Astera is an accessory barndoor for the LED strip light. Made of lightweight aluminum, this two-leaf barndoor helps control the light spread and direct the output. No tools are required for installation.
The Diffuser Dome for AX5 TriplePar LED Light from Astera transforms the look of the AX5 TriplePar LED Light by spreading its native tight 13-degree beam angle to a room-filling 360-degree flood of soft, diffused light.
Designed as accessories for several bulbs, each CupBouncer for NYX Bulb (8-pack) from Astera fits on top of a bulb using suction. The top of each CupBouncer has a flat "hat" that catches vertically emitted light and fans it out horizontally to expand the bulb's beam angle.
The Astera Helios Handle with Baby Pin is a hand-holding accessory for the Astera Helios Tube (not included). The handle attaches to your light fixture and provides a way to handhold the Helios Tube. In addition, the handle incorporates a Baby pin, which allows you to mount the handle and tube onto a C-stand or other mounting system that has a Baby pin...
The Tube Cross Plate for AX1 and Titan from Astera is an accessory that can hold four Wingplates parallel to it and has a 5/8" baby pin welded on its underside for 5/8" receivers. To support the tubes, separately-purchased AX1-WP wingplates and AX-1H metal holders are required.
Astera PixelBrick BrickConnect (set of 8)
This PowerStation Hanger (8-pack) from Astera is an accessory with a single-stud fitting that connects to the PowerStation's airline track to attach mounting tools.
Astera NYX D-Tap splitter cable for FP5
Astera PixelBrick BrickMount (set of 8)
Astera offers three beam-modifying filters. When inserted into the AX2 they can widen the beam angle to 30 degrew, 60 degree or 120 degree to expand the lights possibilities and to make it useful for a wider range of applications.
Astera offers three beam-modifying filters. When inserted into the AX2 they can widen the beam angle to 30 degrew, 60 degree or 120 degree to expand the lights possibilities and to make it useful for a wider range of applications.
Astera offers three beam-modifying filters. When inserted into the AX2 they can widen the beam angle to 30 degrew, 60 degree or 120 degree to expand the lights possibilities and to make it useful for a wider range of applications.
Use this USB Cable for FP5 LED Bulb (8-pack) from Astera to connect an NYX Bulb to a standard PowerBank.
The AX2-50-BD Barndoor for PixelBar AX2-50 LED Bar from Astera is an accessory barndoor for the LED strip light. Made of lightweight aluminum, this two-leaf barndoor helps control the light spread and direct the output. No tools are required for installation.
Store, transport, and protect your ART7 Asterabox in this black Plastic Case from Astera. The case features interior foam, a top handle, and a latch closure.
Astera power supply for Titan, Helios Tube and PixelBrick
The Foldable Stand for LED Tube Lights supports Astera AX1, FP1, and FP2 tubes in a vertical position, very close to the floor, for low-angle shooting. The three legs nest together into a compact form for space-efficient packing.
Gives your AX2 a black surface to camouflage it in black stages and other dark areas.
Astera PixelBrick BrickTilt
Astera PixelBrick BrickHinge
Astera PixelBrick BrickBracket
The Rotatable Filter from Astera is a diffuser that fits the AX7 and AX10 SpotMax spotlights, spreading and converting their native 13-degree beam angle to a soft-edged 17 x 46-degree oval. The increased beam angle and oval shape allow a single fixture to illuminate a full wall. This rotating filter allows the angle of the oval to be positioned at any...
Astera TrackPin
The Astera AX9-ROTAD Rotatable Wallwash Filter is used to flexibly align an elliptical filter on the AX9 PowerPAR. The beam angle is 17 degee x 46 degree.
The Snoot for AX5 3-in-1 Perfect PAR from Astera attaches to the LED fixture and narrows its beam spread while concealing the light source in theatrical situations.
Flexible stand with foldable legs that can be slid onto HydraPanel. Also features 4 threads for mounting.
The Astera WingPlate for Two AX1 Tube Holders can be used to hang or mount tubes, as well as to create shapes such as squares or triangles. The WingPlate requires two separately purchased AX1-H holders for use.
Extension cable to Helios, Titan, Hyperion Tube
The Rotatable Filter from Astera is a diffuser that fits the AX5 TriplePar LED light, spreading and converting its native 13-degree beam angle to a soft-edged 17 x 46-degree oval. The increased beam angle and oval shape allow a single fixture to illuminate a full wall. This rotating filter allows the angle of the oval to be positioned at any degree of...
This 16.4' AX1 Extension Cable from Astera allows connection of one AX1 tube to the AX1-CHR charger.
Astera offers three beam-modifying filters. When inserted into the AX2 they can widen the beam angle to 30 degree, 60 degree or 120 degree to expand the lights possibilities and to make it useful for a wider range of applications.
Astera offers three beam-modifying filters. When inserted into the AX2 they can widen the beam angle to 30 degree, 60 degree or 120 degree to expand the lights possibilities and to make it useful for a wider range of applications.
Astera offers three beam-modifying filters. When inserted into the AX2 they can widen the beam angle to 30 degree, 60 degree or 120 degree to expand the lights possibilities and to make it useful for a wider range of applications.
Connection cable 0.2 m to Titan PowerBox, set of 8 pieces.
This Metal Holder for Mounting Astera Tubes is used to mount FP1, FP2, and FP3 tubes to walls, truss and other structures. They can can also be secured with spax screws.
The Flood Filter for AX9 from Astera is a diffuser that fits the AX9 PowerPar LED spotlight to convert its beam angle to 32-degrees . It modifies the beam of your light to expand its possibilities.
The Elliptical Wallwash Filter for AX9 from Astera is a diffuser that fits the AX9 PowerPar LED spotlight to convert its beam angle to 17 x 46-degree oval. It modifies the beam of your light to expand its possibilities.
The Astera Adapter Disk for AX3 is used to insert the light into an AX5 dome to create a light ball.
The Wallwash Filter from Astera is a diffuser that fits the AX7 and AX10 SpotMax spotlights, spreading and converting their native 13-degree beam angle to a soft-edged 17 x 46-degree oval. The increased beam angle and oval shape allow a single fixture to illuminate a full wall.
The 32-Degree Flood Filter from Astera can be easily slotted into the AX7 SpotLite or AX10 SpotMax LED spotlights, broadening the 13-degree beam angle spread native to the spotlights up to 32-degrees, providing a wider wash of light.
Astera AX3 charger 5V, 3A with EU connector
Astera NYX E27 Fassung
Gives your AX2 a black surface to camouflage it in black stages and other dark areas.
The 32-Degree Flood Filter for AX5 TriplePar LED Light from Astera can be easily slotted into the AX5 TriplePar, broadening its native 13-degree beam angle up to a 32-degree spread, providing a wider wash of light.
The Wallwash Filter for AX5 TriplePar LED Light from Astera is a diffuser that fits the AX5 LED par, spreading and converting its native 13-degree beam angle to a soft-edged 17 x 46-degree oval. The increased beam angle and oval shape allow a single fixture to illuminate a full wall.
Astera PixelBrick BrickDome
Astera AX2 TrackHanger
Astera NYX extension cable for NYX Bulbs
Connect 2 HydraPanels together to form a bigger panel with more punch. Backside 1/4" thread.
Astera intensifier that creates a more narrow beam with 80 degree. Contains magnet corners to attach EggCrates.
100-Degree Soft Frame for FP6 HydraPanel
Infrared Remote Control
The Astera AX-HCN HexConnect is a special bolt for the RuntimeExtender so that it can be attached to SuperClamps and GripHeads. The hexagonal design ensures a secure hold. HexConnect is attached to the Airline Track of the RuntimeExtender.
The Wallwash Filter from Astera is a diffuser that fits the AX3 DropLite LED Light, spreading and converting its native 13-degree beam angle to a soft-edged 17 x 46-degree oval. The increased beam angle and oval shape allow a single fixture to illuminate a full wall.
The Astera DMX Adapter Cable for Art7 AsteraBox connects your Art7 AsteraBox to a DMX control board, enabling you to wirelessly control your Astera wireless fixtures using DMX. This item is the accessory cable only, and it does not include the Art7 AsteraBox.
HydraPanel GelHolder
Astera Eggcrate Cuts off spill light around the beam and avoids glare. Results in 40 degree beam.
Astera Eggcrate Cuts off spill light around the beam and avoids glare. Results in 60 degree beam.
HydraPanel DiffusorSheet 100
The Diffuser Dome for AX3 LightDrop from Astera transforms the look of the AX3 LightDrop LED Light by spreading its native tight 13-degree beam angle to a room-filling 360-degree flood of soft, diffused light.
The 30-Degree Flood Filter for AX3 LightDrop LED from Astera can be easily slotted into the AX3 LightDrop light, broadening its native 13-degree beam angle up to a 30-degree spread, providing a wider wash of light.
The 120-Degree Diffuser Filter for AX3 LED LightDrop from Astera can be easily slotted into the AX3 LED LightDrop, broadening its native 13-degree beam angle up to an extremely wide and diffused 120-degree spread, providing a broader, softer wash of light.
Gives a black surface so that it can blend into dark environments
Astera PixelBrick FloodFilter
Astera PixelBrick BeamSoftener
16 mm spigot with 3/8" thread
An essential accessory for mounting on Super Clamps or any piece of grip gear with female threads, the BabyPin Double-Ended Spigot from Astera has 1/4"-20 threads at one end and 3/8"-16 threads at the other for mounting onto clamping gear and support lights with a 5/8" receiver.
The Astera AX7 / AX10 Super Bolt is designed to attach these fixtures to the Manfrotto Super Clamp. The thread size is 1.2".
AX3 Lightdrop threaded ring for PE objects
AX3 Lightdrop threaded plate for PE objects
Candy Light threaded ring for PE objects
This pair of M5 Eyebolts for Ax1 Pixel, Helios, Titan and Hyperion Tubes from Astera screw into the tube and allow it to be suspended without a frame. They can also be used for suspending four tubes via safety wire.
Eyebolt M5
AX3 Lightdrop adapter for SLIDE objects and PE objects
Pin for Astera AX1 / Titan Tube metal mounting clip