295 mm viewfinder extension compatible with ALEXA Studio, ALEXA XT Studio, ALEXA SXT Studio, all ARRIFLEX 435 models and the ARRIFLEX 535B.
150 mm viewfinder extension compatible with OVF-1 (with ARRICAM Eyepiece Adapter AEA-1), ARRICAM Studio Viewfinder, ARRICAM Studio Universal Viewfinder, ARRICAM Lite Viewfinder 2 and ARRICAM Lite Universal Viewfinder.
200 mm viewfinder extension compatible with ALEXA Studio, ALEXA XT Studio, ALEXA SXT Studio, all ARRIFLEX 435 models and the ARRIFLEX 535B.
A module that attaches to the ALEXA Studio/ALEXA XT Studio Optical Universal Viewfinder OVF-1 and accepts ArriCAM style frameglow masks. Frameglow can be set to any color.
Replaces the 2x De-squeeze Module in the OVF-1 with a 1.3x squeeze ratio.
A heated eyecup compatible with the AMIRA MVF-1 (new eyepice) and the ALEXA EVF-1 eyepiece. Designed to reduce fogging or freezing in very humid and/or cold environments. Not compatible with AMIRA MVF-1 (old eyepiece) or film camera eyepieces. Includes heated eyecup cable KC-42 (K2.47771.0).
A robust heated eyecup with 2 power settings that fits all ARRICAM, ARRIFLEX and ALEXA Studio eyepieces. Not compatible with ALEXA Electronic Viewfinder EVF-1 or AMIRA Viewfinder MVF-1 eyepieces. Cable has to be ordered separately.
Sturdy telescoping bracket that attaches the Electronic Viewfinder EVF-1 to all ALEXA cameras (Electronic Viewfinder Adapter EVA-1 additionally required for ALEXA Studio and ALEXA XT Studio). Uses standard 15 mm lightweight rods (at the proper distance from each other and from the optical center) for forward/backwards movement.
The Viewfinder Mounting Bracket VMB-5 offers a longer reach than traditional viewfinder brackets and is the most flexible and comfortable method to attach a viewfinder to a camera. Positioning the viewfinder in a 360° arc is done by loosening a single thumb screw and freely repositioning the viewfinder, which will remain in place thanks to double...
Attaches MVF-1 viewfinder to ALEXA Mini via 15mm LWS rods and viewfinder mount. Requires MAP-2 for 15mm rod support.
A mechanical cover for the ALEXA Studio or ALEXA XT Studio viewfinder interface that includes mounting points for the ALEXA Viewfinder Mounting Bracket VMB-1 - VMB-2 or VMB-3 and an EVF connector for an ALEXA viewfinder cable.
With this adapter the ALEXA Studio Optical Viewfinder OVF-1 can accept the ArriCAM Studio Eyepiece (K2.54003.0) - ArriCAM Studio Medium Extension (K2.54005.0) - ArriCAM Studio Zoom Extension (K2.54004.0) and ArriCAM Studio Anamorphic Extension (K2.54018.0 - which is recommended - sadly but ironically - only for spherical viewing with ALEXA Studio).
Ground glass for ALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio in 4:3 mode with no markings. 800 grit surface.
Ground glass for ALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio in 16:9 mode with spherical lenses. Includes rectangles for 1.78:1 and 2.39:1 (flat) and stubs for 1.33:1 inside of 1.78:1. 1200 grit surface
Ground glass for ALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio in 4:3 mode with spherical lenses. Includes rectangles for 1.78:1 and 2.39:1 (flat) and stubs for 1.33:1 inside of 1.78:1. 1200 grit surface
Ground glass forALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio in 4:3 mode with no markings. 1200 grit surface.
Ground glass for ALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio in 16:9 mode with no markings. 800 grit surface.
Ground glass for ALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio in 16:9 mode with no markings. 1200 grit surface.
EVF Tilt Adapter Swiss warranty. A unique tool to expand the usability of the FUJIFILM GFX 50S's removable electronic viewfinder, the EVF-TL1 EVF Tilt Adapter permits adjusting the angle at which the EVF is attached to the camera body.
Sturdy telescoping bracket that positions the Electronic Viewfinder EVF-1 or MVF-1 at the back of the camera (i.e. for use with geared heads). Includes swing-out arm to rest viewfinder on camera during set up changes. Requires medium (recommended) or long viewfinder cable.
Used on current ARRI cameras, this proven viewfinder bracket offers the best adjustment range and sturdiness for this type of viewfinder from the Sony FS7II/ FX9.
The VFA-4 optimizes handheld operating with on-board monitors by profiting from the adjustability of classic ARRI viewfinder mounts such as ARRI VMB-3, MVB-1 or VMB-5. The VFA-4 is well suited for operating with suspension harness and suits particularly well the ARRI Camera Control Monitor CCM-1.
Connects the Electronic Viewfinder EVF-1 to the EVF socket on ALEXA and ALEXA XT cameras. Longest possible length for use with specialty rigs.
Connects the Electronic Viewfinder EVF-1 to the EVF socket on ALEXA and ALEXA XT cameras. Ideal length for use of EVF-1 on camera right side or when using Viewfinder Extension Bracket VEB-1 or VEB-3.
Connects the Electronic Viewfinder EVF-1 to the EVF socket on ALEXA and ALEXA XT cameras. Ideal length for use of EVF-1 on camera left side in handheld mode.
This viewfinder bracket is designed for the Canon EOS C200 viewfinder kit
FF Heavy OLPF (OLPF-FF3)
An attachment that allows the AMIRA viewfinder to be mounted to two 15 mm lightweight rods above the lens - as can be found on the Universal Adapter Plate UAP-2 (K2.0001221). This bracket is already included in the Universal Adapter Plate UAP-2 Set (K0.0001280).
Viewfinder bracket universal
This viewfinder bracket is designed for the Arri viewfinders
Provides REC, BAT and FULL warning indicators in the bottom of the optical viewfinder frame when a blank ground glass is used on ALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio
Separate top handgrip including top 15mm rails (Fits directly on Blackmagic Cinema Camera)
Viewfinder bracket with rosette
This viewfinder bracket kit is designed for use with any viewfinder with a 1/4" thread on the bottom side
This viewfinder bracket is designed for the Canon EOS C200 viewfinder
The viewfinder bracket for the Canon EVF viewfinders replaces the original bracket from Canon mounted on their viewfinders. The ARRI PCA viewfinder bracket is an improved bracket to fit with our viewfinder mounting bracket MVB-1
FF Light OLPF (OLPF-FF1)
This viewfinder bracket is designed for the Sony PXW-FS7 / FS7 II and is meant to replace the original viewfinder bracket of this camera
Mounting bracket for EVF (V)
This viewfinder bracket kit is designed for viewfinders that are equiped with a rosette with 1/4" threaded hole
This viewfinder bracket is designed for the Arri viewfinders
Viewfinder bracket for Sony PXW-FS7
A cover to protect the ALEXA Studio or ALEXA XT Studio viewfinder port when neither the Optical Universal Viewfinder OVF-1 (K2.72048.0) nor the Electronic Viewfinder Adapter EVA-1 (K2.72063.0) are attached.
Magnify your viewfinder's center image area by 2x with Nikon DG-2 Eyepiece Magnifier, which flips up to quickly view the entire image area when needed.
The Square Accessory Sleeve SAS-1 is required to mount the Viewfinder Mounting Bracket VMB-5 to your camera and has been designed with a rectangular rod to prevent the viewfinder falling when loosening the adjustment clamp.
The SAS-2 is a modernization of the original SAS-1 that can be attached pointing rearward at the front of the handle CCH-5, optimizing space with short lenses set-ups.
Viewfinder Adapter VFA-3
Single sided 15 mm NATO rail long; length: 170 mm
This viewfinder bracket is designed for the Sony PXW-FS7 / FS7 II and is meant to replace the original viewfinder bracket of this camera
Separate 15 mm viewfinder adapter for top handgrip
Viewfinder extender
M/F6 Focusing Screen
U/F6 Focusing Screen
?h? N?k?n ? ???? F??u??ng ??r??n ?? th? ?t?nd?rd f??u??ng ??r??n ?u??l??d f?r ?ll N?k?n ?F ?LR ??m?r??. ?h?? ??rt??ul?r ??r??n ?? t? f?t th? N?k?n D3 D?LR. ?h? ???? ? F??u??ng ??r??n ?? ?n ?nt?r?h?ng??bl? f??u??ng ??r??n th?t ?ff?r? un?b?tru?t?d v??w?ng ?nd ???? f??u??ng ?v?r th? ?nt?r? m?tt? ?urf???. ?h?? ??r??n ?? ?d??l f?r g?n?r?l ?h?t?gr??h?.
L/F6 Focusing Screen
J/F6 Focusing Screen
E/F6 Focusing Screen
An adapter with an Arri viewfinder dovetail on one side and one 3/8 and one 1/4 mounting point on the other side. This adapter can be used to mount the AMIRA or ALEXA viewfinders to Arri Universal Mounting Arms (UMA) or Noga arms.
The ZMU-4 ARRI Rosette can be mounted as a second rosette on the ZMU-4. This second rosette is already premounted on the ZMU-4 when ordering KK.0043770 ZMU-4 Basic Set.
The Nikon DK-17A Anti-Fog Eyepiece is a replacement eyepiece for select Nikon SLR and DSLR cameras. This eyepiece includes a fog-resistant optical element and provides a comfortable surface for the area around your eye while framing a subject through the camera's viewfinder.
Dedicated to the Nikon Z9 and Z8 mirrorless cameras, the DK-33 Rubber Eyecup blocks stray light from causing glare and simultaneously improves viewing comfort.
The Nikon DK-27 Eyepiece Adapter for D5 DSLR is a replacement eyepiece for the Nikon D5 DSLR camera. The eyepiece provides a comfortable frame with which to utilize the camera's viewfinder.
The Nikon DK-17F Fluorine-Coated Finder Eyepiece is a replacement eyepiece for select Nikon DSLR cameras. This eyepiece features fluorine coated glass and soft durable rubber and is safe for eyeglass users.
The Nikon DK-17 Eyepiece is a replacement eyepiece for select Nikon SLR and DSLR cameras. This eyepiece provides a comfortable surface for the area around your eye while framing a subject through the camera's viewfinder.
Use this Rubber Eyecup from Blackmagic Design as a spare or replacement for the URSA Viewfinder eyecup.
KineEVF Eyecushion
DK-30 Rubber Eyecup
Eyepiece shield made from comfortable soft rubber. Minimises the amount of stray light that enters the viewfinder.
The DK-32 Rubber Eyecup is dedicated for the Nikon Zfc mirrorless camera and aids in the comfortable viewing through the camera's viewfinder.
Dedicated to the Nikon Z 7 and Z 6 mirrorless cameras, the DK-29 Rubber Eyecup is a spare or replacement item for the one originally included with the camera. This eyecup blocks stray light from causing glare and simultaneously improves viewing comfort.
The Nikon DK-28 Rubber Eyecup, which improves viewing comfort when the camera is against your face, fits right onto the viewfinder of the Nikon D7500. The eyecup also blocks stray light from entering the viewfinder and creating glare, which prevents you from seeing the image clearly.
The DK-21 Rubber Eyecup attaches to the viewfinder eyepiece of select Nikon DSLRs and helps to minimize the amount of stray light entering the viewfinder for more comfortable viewing.
The Nikon DK-19 Rubber Eyecup allows for more comfortable viewing through the camera's viewfinder, especially for eyeglass wearers. Less stray light enters the viewfinder and a less flared, clearer image with which to compose your shot is provided.
Eye Cup XT
Eye Cup XT
The Nikon DK-9 Rubber Eyecup fits Nikon N80 SLR cameras, easily mounting to the viewfinder; it provides a comfortable surface for the area around your eye, preventing scratches or damage to your eyeglasses.
Round Eyecup for GFX 50S, X-T2, and X-T1
Long Eyecup
The Nikon DK-16 Rubber Eyecup for Select Nikon Cameras is a viewfinder frame for select Nikon DSLR and SLR cameras. This eyecup is intended to prevent stray light, which could make focusing and composing an image difficult, from coming in between a compatible camera's viewfinder and the eye it is held up to.
The Nikon DK-22 Eyepiece Adapter allows the use of eyepiece accessories made for other cameras that feature the round eyepiece.
The Nikon DK-25 Rubber Eyecup is a replacement for the eyecup included with the D5300 DSLR camera. It allows for more comfortable viewing through the camera's viewfinder. It also decreases the amount of stray light that can enter the viewfinder and cause flare.
The DK-26 Eyepiece Cap from Nikon is compatible with the Nikon Df DSLR Camera. It is designed to cover the viewfinder window to keep stray light from entering the viewfinder and causing flare that negatively affects your exposures.
The DK-5 Eyepiece Cap from Nikon protects select camera's viewfinders from dust and moisture when not in use. It is also useful when using the self-timer or remote release functions in conjunction with long exposures, in order to prevent light from entering the viewfinder and affecting auto-exposure results.