OLED Electronic View Finder EVF-V70
1 Stück auf Lager
The Z-Finder for Sony FX6 from Zacuto is an optical viewfinder that uses 2.5x magnification to turn the camera's LCD monitor into a clear, easy-to-focus viewfinder.
4 Stück auf Lager
High quality viewfinder with built in proximity sensor, 4 element glass diopter, built in status information, and a digital focus chart.
1 Stück auf Lager
Glasses model HoodEYE eyecup for Canon 7D, 1D & 1DS MARK III / IV
5 Stück auf Lager
Bright - high contrast optical viewfinder OVF-1 for ALEXA Studio and ALEXA XT Studio for through-the-lens viewing with low distortion - accurate color fidelity and no delay. Rotates to left and right of camera body and telescopes closer/farther from camera body. Automatically keeps an upright image with an optional manual image rotation.
The MVF-2 is a low latency (?1 frame delay) electronic color viewfinder with a high contrast OLED viewfinder display (1920 x 1080) and 4" LCD flip-out monitor (800 x 400). The eyepiece is based on the ARRICAM design and offers high contrast, low distortion, an evenly illuminated viewing area for a clean image and a wide exit pupil for freedom of movement...
MVF-1 Viewfinder for the ALEXA Mini including a 75cm Viewfinder Connection Cable
The viewfinder is included in the AMIRA K0 camera packages and does not need to be ordered separately when ordering a AMIRA K0 camera package
Low latency (?1 frame delay) electronic color viewfinder with 1920 x 1080 high-contrast OLED display. Eyepiece is based on the ARRICAM design and offers high contrast, low distortion, an evenly illuminated viewing area for a clean image and a wide exit pupil for greater freedom of movement for the operator.
Full HD OLED & LCD VF for HDC/HSC/HDW/PDW/F65/PXW/PMW-500
Film-style, low latency (?1 frame delay) electronic color viewfinder with 1280 x 784 F-LCOS micro display (image: 1280 x 720, status bars: 1280 x 32 above and 1280 x 32 below image) and ARRI LED illumination, both temperature controlled. The high-end coated glass optics of the EVF-1 offer high contrast, low distortion and an evenly illuminated viewing area.
Full HD OLED VF for HDC/HSC/HDW/F65/PDW/PXW/PMW-500
7.4'' Colour OLED Viewfinder for HDC/HSC/PDW/HDW
295 mm viewfinder extension compatible with ALEXA Studio, ALEXA XT Studio, ALEXA SXT Studio, all ARRIFLEX 435 models and the ARRIFLEX 535B.
2 16:9 widescreen B/W CRT viewfinder for the HDW Series, HDC1000R series and the New HSC300 HD/SD Cameras. ()Viewable area measured diagonally.
Panasonic AJ-HVF21KG is a 2inch B&W viewfinder compatible with the HPX-3100 camera.
Lieferzeit binnen 6 Wochen
150 mm viewfinder extension compatible with OVF-1 (with ARRICAM Eyepiece Adapter AEA-1), ARRICAM Studio Viewfinder, ARRICAM Studio Universal Viewfinder, ARRICAM Lite Viewfinder 2 and ARRICAM Lite Universal Viewfinder.
200 mm viewfinder extension compatible with ALEXA Studio, ALEXA XT Studio, ALEXA SXT Studio, all ARRIFLEX 435 models and the ARRIFLEX 535B.
A module that attaches to the ALEXA Studio/ALEXA XT Studio Optical Universal Viewfinder OVF-1 and accepts ArriCAM style frameglow masks. Frameglow can be set to any color.
Replaces the 2x De-squeeze Module in the OVF-1 with a 1.3x squeeze ratio.
Colour LCD VF for HDVF compatible camera and camcorders
8x magnification wide angle eyepiece compatible with ALEXA Studio - ALEXA XT Studio - all ArriFLEX 435 models and the ArriFLEX 535B.
10x magnification super wide angle eyepiece compatible with ALEXA Studio, XT Studio, SXT Studio, all ARRIFLEX 435 models and the ARRIFLEX 535B.
3.5Inches Color Lcd Hd Viewfinder Pmw-320/350/400/500
KineEVF2 Pack
KineEVF2 Full-HD OLED Viewfinder
Add the high-resolution URSA Cine EVF to your Blackmagic Design URSA Cine 12K or PYXIS 6K camera for crisp, clear images, making shooting easy in any environment. The EVF features a 1920 x 1080 color OLED display supporting up to 60 fps to view your image with status information, frame guides, and even a built-in focus chart to help you achieve the...
A heated eyecup compatible with the AMIRA MVF-1 (new eyepice) and the ALEXA EVF-1 eyepiece. Designed to reduce fogging or freezing in very humid and/or cold environments. Not compatible with AMIRA MVF-1 (old eyepiece) or film camera eyepieces. Includes heated eyecup cable KC-42 (K2.47771.0).
The Blackmagic URSA Viewfinder is designed specifically for use with the URSA and URSA mini digital film cameras.
he EVF101 Electronic Viewfinder from Z CAM offers a crisp viewing option for your Z CAM or other camera lacking an integrated viewfinder. This viewfinder has an HDMI input that supports up to UHD 4K30 video and an SDI input supporting up to 1080p60 video.
Largely extended range for positioning the eye in avertical and horizontal direction. Includes an improved position for the approach sensor with increased compatibility for "left eye operators" and also for using individual eyecushions. Only for MVF-1 with serail number 2150 and below, MVF-1 with serial number 2151 and higher do include this upgrade already.
A robust heated eyecup with 2 power settings that fits all ARRICAM, ARRIFLEX and ALEXA Studio eyepieces. Not compatible with ALEXA Electronic Viewfinder EVF-1 or AMIRA Viewfinder MVF-1 eyepieces. Cable has to be ordered separately.
The VMB-5 is a medium length viewfinder mounting bracket with fast and comfortable adjustment. The VMB-5 attaches to the Square Accessory Sleeve SAS-1. The SAS-1 attaches to any two M4 attachment points that are 20 mm apart. The ARRI viewfinders EVF-1, EVF-2, MVF-1 or MVF-2 can be attached to the dovetail on the VMB-5.
Sturdy telescoping bracket that attaches the Electronic Viewfinder EVF-1 to all ALEXA cameras (Electronic Viewfinder Adapter EVA-1 additionally required for ALEXA Studio and ALEXA XT Studio). Uses standard 15 mm lightweight rods (at the proper distance from each other and from the optical center) for forward/backwards movement.
Compatible with the Sigma fp series of mirrorless cameras, the EVF-11 Electronic Viewfinder is an auxiliary viewfinder offering bright, high-magnification eye-level monitoring.
Lieferzeit binnen 6 bis 8 Wochen
The Viewfinder Mounting Bracket VMB-5 offers a longer reach than traditional viewfinder brackets and is the most flexible and comfortable method to attach a viewfinder to a camera. Positioning the viewfinder in a 360° arc is done by loosening a single thumb screw and freely repositioning the viewfinder, which will remain in place thanks to double...
Attaches MVF-1 viewfinder to ALEXA Mini via 15mm LWS rods and viewfinder mount. Requires MAP-2 for 15mm rod support.
A mechanical cover for the ALEXA Studio or ALEXA XT Studio viewfinder interface that includes mounting points for the ALEXA Viewfinder Mounting Bracket VMB-1 - VMB-2 or VMB-3 and an EVF connector for an ALEXA viewfinder cable.
Ready to use directors viewfinder kit for any camera with an E mount.
Ground glass for ALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio in 4:3 mode with no markings. 800 grit surface.
Ground glass for ALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio in 4:3 mode with spherical lenses. Includes rectangles for 1.78:1 and 2.39:1 (flat) and stubs for 1.33:1 inside of 1.78:1. 1200 grit surface
Ground glass for ALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio in 16:9 mode with spherical lenses. Includes rectangles for 1.78:1 and 2.39:1 (flat) and stubs for 1.33:1 inside of 1.78:1. 1200 grit surface
Ground glass for ALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio in 16:9 mode with no markings. 800 grit surface.
With this adapter the ALEXA Studio Optical Viewfinder OVF-1 can accept the ArriCAM Studio Eyepiece (K2.54003.0) - ArriCAM Studio Medium Extension (K2.54005.0) - ArriCAM Studio Zoom Extension (K2.54004.0) and ArriCAM Studio Anamorphic Extension (K2.54018.0 - which is recommended - sadly but ironically - only for spherical viewing with ALEXA Studio).
Ground glass for ALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio in 16:9 mode with no markings. 1200 grit surface.
Ground glass forALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio in 4:3 mode with no markings. 1200 grit surface.
EVF Tilt Adapter Swiss warranty. A unique tool to expand the usability of the FUJIFILM GFX 50S's removable electronic viewfinder, the EVF-TL1 EVF Tilt Adapter permits adjusting the angle at which the EVF is attached to the camera body.
Sturdy telescoping bracket that positions the Electronic Viewfinder EVF-1 or MVF-1 at the back of the camera (i.e. for use with geared heads). Includes swing-out arm to rest viewfinder on camera during set up changes. Requires medium (recommended) or long viewfinder cable.
The Canon EVF-V50 OLED Viewfinder for C500 Mark II is a tilting EVF that you can mount on your Canon C500 Mark II camera.
Unbekannte Lieferfrist
LCD View Finder LVF-11 (fp)
Lieferzeit binnen 6 bis 8 Wochen
Used on current ARRI cameras, this proven viewfinder bracket offers the best adjustment range and sturdiness for this type of viewfinder from the Sony FS7II/ FX9.
The VFA-4 optimizes handheld operating with on-board monitors by profiting from the adjustability of classic ARRI viewfinder mounts such as ARRI VMB-3, MVB-1 or VMB-5. The VFA-4 is well suited for operating with suspension harness and suits particularly well the ARRI Camera Control Monitor CCM-1.
Sigma VF-31 External Viewfinder for DP1 Quattro
Lieferzeit binnen 6 bis 8 Wochen
Sigma VF-41 External Viewfinder for DP2 Quattro
Lieferzeit binnen 6 bis 8 Wochen
Sigma VF-51 External Viewfinder for DP0 Quattro
Lieferzeit binnen 6 bis 8 Wochen
Connects the Electronic Viewfinder EVF-1 to the EVF socket on ALEXA and ALEXA XT cameras. Longest possible length for use with specialty rigs.
Connects the Electronic Viewfinder EVF-1 to the EVF socket on ALEXA and ALEXA XT cameras. Ideal length for use of EVF-1 on camera right side or when using Viewfinder Extension Bracket VEB-1 or VEB-3.
Connects the Electronic Viewfinder EVF-1 to the EVF socket on ALEXA and ALEXA XT cameras. Ideal length for use of EVF-1 on camera left side in handheld mode.
This viewfinder bracket is designed for the Canon EOS C200 viewfinder kit
FF Heavy OLPF (OLPF-FF3)
An attachment that allows the AMIRA viewfinder to be mounted to two 15 mm lightweight rods above the lens - as can be found on the Universal Adapter Plate UAP-2 (K2.0001221). This bracket is already included in the Universal Adapter Plate UAP-2 Set (K0.0001280).
Viewfinder bracket universal
This viewfinder bracket is designed for the Arri viewfinders
The DR-5 Screw-In Right Angle Viewfinder from Nikon provides an upright, unreversed image for right-angle viewing, very convenient for waist-level or low-angle photography.
The Nikon DR-6 Rectangular Right Angle Viewfinder provides an upright, unreversed image for right-angle viewing, which is very convenient for waist-level or low-angle photography.
Provides REC, BAT and FULL warning indicators in the bottom of the optical viewfinder frame when a blank ground glass is used on ALEXA Studio, ALEXA XT Studio or ALEXA SXT Studio
View Finder VF11 (DP1/S/X/Merrill)
Lieferzeit binnen 6 bis 8 Wochen
View Finder VF21 (DP2/S/X/Merrill)
Lieferzeit binnen 6 bis 8 Wochen
Separate top handgrip including top 15mm rails (Fits directly on Blackmagic Cinema Camera)
Viewfinder bracket with rosette
This viewfinder bracket kit is designed for use with any viewfinder with a 1/4" thread on the bottom side
This viewfinder bracket is designed for the Canon EOS C200 viewfinder
The viewfinder bracket for the Canon EVF viewfinders replaces the original bracket from Canon mounted on their viewfinders. The ARRI PCA viewfinder bracket is an improved bracket to fit with our viewfinder mounting bracket MVB-1
FF Light OLPF (OLPF-FF1)
This viewfinder bracket is designed for the Sony PXW-FS7 / FS7 II and is meant to replace the original viewfinder bracket of this camera
Mounting bracket for EVF (V)
This viewfinder bracket kit is designed for viewfinders that are equiped with a rosette with 1/4" threaded hole
This viewfinder bracket is designed for the Arri viewfinders
Viewfinder bracket for Sony PXW-FS7
A cover to protect the ALEXA Studio or ALEXA XT Studio viewfinder port when neither the Optical Universal Viewfinder OVF-1 (K2.72048.0) nor the Electronic Viewfinder Adapter EVA-1 (K2.72063.0) are attached.
Magnify your viewfinder's center image area by 2x with Nikon DG-2 Eyepiece Magnifier, which flips up to quickly view the entire image area when needed.
The Square Accessory Sleeve SAS-1 is required to mount the Viewfinder Mounting Bracket VMB-5 to your camera and has been designed with a rectangular rod to prevent the viewfinder falling when loosening the adjustment clamp.
The SAS-2 is a modernization of the original SAS-1 that can be attached pointing rearward at the front of the handle CCH-5, optimizing space with short lenses set-ups.
Viewfinder Adapter VFA-3
Single sided 15 mm NATO rail long; length: 170 mm
This viewfinder bracket is designed for the Sony PXW-FS7 / FS7 II and is meant to replace the original viewfinder bracket of this camera
Viewfinder extender
Separate 15 mm viewfinder adapter for top handgrip
U/F6 Focusing Screen
M/F6 Focusing Screen
L/F6 Focusing Screen
J/F6 Focusing Screen
E/F6 Focusing Screen
?h? N?k?n ? ???? F??u??ng ??r??n ?? th? ?t?nd?rd f??u??ng ??r??n ?u??l??d f?r ?ll N?k?n ?F ?LR ??m?r??. ?h?? ??rt??ul?r ??r??n ?? t? f?t th? N?k?n D3 D?LR. ?h? ???? ? F??u??ng ??r??n ?? ?n ?nt?r?h?ng??bl? f??u??ng ??r??n th?t ?ff?r? un?b?tru?t?d v??w?ng ?nd ???? f??u??ng ?v?r th? ?nt?r? m?tt? ?urf???. ?h?? ??r??n ?? ?d??l f?r g?n?r?l ?h?t?gr??h?.
An adapter with an Arri viewfinder dovetail on one side and one 3/8 and one 1/4 mounting point on the other side. This adapter can be used to mount the AMIRA or ALEXA viewfinders to Arri Universal Mounting Arms (UMA) or Noga arms.
The ZMU-4 ARRI Rosette can be mounted as a second rosette on the ZMU-4. This second rosette is already premounted on the ZMU-4 when ordering KK.0043770 ZMU-4 Basic Set.
The Nikon DK-17A Anti-Fog Eyepiece is a replacement eyepiece for select Nikon SLR and DSLR cameras. This eyepiece includes a fog-resistant optical element and provides a comfortable surface for the area around your eye while framing a subject through the camera's viewfinder.
Dedicated to the Nikon Z9 and Z8 mirrorless cameras, the DK-33 Rubber Eyecup blocks stray light from causing glare and simultaneously improves viewing comfort.
The Nikon DK-17 Eyepiece is a replacement eyepiece for select Nikon SLR and DSLR cameras. This eyepiece provides a comfortable surface for the area around your eye while framing a subject through the camera's viewfinder.
The Nikon DK-17F Fluorine-Coated Finder Eyepiece is a replacement eyepiece for select Nikon DSLR cameras. This eyepiece features fluorine coated glass and soft durable rubber and is safe for eyeglass users.
The Nikon DK-27 Eyepiece Adapter for D5 DSLR is a replacement eyepiece for the Nikon D5 DSLR camera. The eyepiece provides a comfortable frame with which to utilize the camera's viewfinder.
Use this Rubber Eyecup from Blackmagic Design as a spare or replacement for the URSA Viewfinder eyecup.
KineEVF Eyecushion
The Nikon DK-19 Rubber Eyecup allows for more comfortable viewing through the camera's viewfinder, especially for eyeglass wearers. Less stray light enters the viewfinder and a less flared, clearer image with which to compose your shot is provided.
The DK-21 Rubber Eyecup attaches to the viewfinder eyepiece of select Nikon DSLRs and helps to minimize the amount of stray light entering the viewfinder for more comfortable viewing.
The Nikon DK-28 Rubber Eyecup, which improves viewing comfort when the camera is against your face, fits right onto the viewfinder of the Nikon D7500. The eyecup also blocks stray light from entering the viewfinder and creating glare, which prevents you from seeing the image clearly.
Dedicated to the Nikon Z 7 and Z 6 mirrorless cameras, the DK-29 Rubber Eyecup is a spare or replacement item for the one originally included with the camera. This eyecup blocks stray light from causing glare and simultaneously improves viewing comfort.
DK-30 Rubber Eyecup
Eyepiece shield made from comfortable soft rubber. Minimises the amount of stray light that enters the viewfinder.
The DK-32 Rubber Eyecup is dedicated for the Nikon Zfc mirrorless camera and aids in the comfortable viewing through the camera's viewfinder.
Eye Cup XT
Eye Cup XT
The Nikon DK-9 Rubber Eyecup fits Nikon N80 SLR cameras, easily mounting to the viewfinder; it provides a comfortable surface for the area around your eye, preventing scratches or damage to your eyeglasses.
Round Eyecup for GFX 50S, X-T2, and X-T1
Long Eyecup
The Nikon DK-16 Rubber Eyecup for Select Nikon Cameras is a viewfinder frame for select Nikon DSLR and SLR cameras. This eyecup is intended to prevent stray light, which could make focusing and composing an image difficult, from coming in between a compatible camera's viewfinder and the eye it is held up to.
The Nikon DK-22 Eyepiece Adapter allows the use of eyepiece accessories made for other cameras that feature the round eyepiece.
The Nikon DK-25 Rubber Eyecup is a replacement for the eyecup included with the D5300 DSLR camera. It allows for more comfortable viewing through the camera's viewfinder. It also decreases the amount of stray light that can enter the viewfinder and cause flare.
The DK-26 Eyepiece Cap from Nikon is compatible with the Nikon Df DSLR Camera. It is designed to cover the viewfinder window to keep stray light from entering the viewfinder and causing flare that negatively affects your exposures.
The DK-5 Eyepiece Cap from Nikon protects select camera's viewfinders from dust and moisture when not in use. It is also useful when using the self-timer or remote release functions in conjunction with long exposures, in order to prevent light from entering the viewfinder and affecting auto-exposure results.
Full HD (1920x1080) OLED Viewfinder for F5/55 Camera. Lemo connector, Knobs for brightness, Peaking and Contrast