Nano-Shield 19/21 Lyre 68-Shore (Pair)
5 Stück auf Lager
Table base
6 Stück auf Lager
Shock mount for the microphones U 67 and U 87.
The SG 110 nx swivel mount can be inserted between KK 1... capsules and the KM D output stage. The capsule can then be swiveled and orientated through ± 110°
Table stand, cable 3m
The auditorium hanger consists of a cable suspension and a rotating 1/2" threaded stud, to connect to e. g. swivel mounts
The auditorium hanger consists of a cable suspension and a rotating 1/2" threaded stud, to connect to e. g. swivel mounts
Genelec 8020 to Vesa Adapter compatible up to Version C
Elegant table stand with acrylic base.
The MNV 100 auditorium hanger is used to suspend a detached miniature microphone capsule freely from ist interconnecting cable. The assembly can be rotated and tilted to any desired angle. Suitable for cables with 3 - 3.5 mm diameter
InVision Stereo Pair Kit
Lieferzeit binnen 4 bis 5 Wochen
Table base
On the microphone side it has a 3/8" male thread, on the stand side a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands
The Z 26 rubber shock mount is inserted between the stand and the swivel mount to avoid the transmission of structure-borne noise. It has a 3/8" threaded stud and a 5/8"-27 female thread to attach to tripods. Included is a thread adapter for 1/2" and 3/8" studs
The Microphone Bracket Holder provides offset support for any standard microphone bracket fitted with a 3/8 thread.The Microphone Bracket Holder can be attached to any Arri 3/8 accessory interface - such as handles - cage arms and top plates.
Softie Lyre Mount with MHR
Lieferzeit binnen 4 bis 5 Wochen
Table Mount: For mounting mic arm desktop where thickness does not allow use of other options
Table through mount: Alternative to Bushing, Requires smaller hole in desktop
InVision INV-7 Pop Filter Kit
Lieferzeit binnen 4 bis 5 Wochen
Bushing: For mounting mic arm through a desktop, Best option for furniture integration, Elegant stainless steel, Good for standby mounting points
Pair of Duo-Lyre 72 (19/34) (with modular adaptor & screws)
Lieferzeit binnen 4 bis 5 Wochen
Pair of Duo-Lyre 68 (19/34) (with modular adaptor & screws)
Lieferzeit binnen 4 bis 5 Wochen
Pair of Duo-Lyre 68 (19/34) (with stereo risers)
Lieferzeit binnen 4 bis 5 Wochen
The Neumann MNV 21 MT is designed to hang Neumann miniature or KMR81 microphones over stages, theaters, halls, board rooms, houses-of worship, etc. The mount features a cable strain relief with a lock and uses the tension on the microphone cable to create the desired mounting angle
Pair of Duo-Lyre 72 (19/34) (with stereo risers)
Lieferzeit binnen 4 bis 5 Wochen
InVision INV-6 Heavy
Lieferzeit binnen 4 bis 5 Wochen
Classic Adaptor for PCS-Boom w/ XLR holder - (fits Modular Windshield Kits). The Classic Adapter for PCS-Boom from Rycote is an adapter that provides a neat, lightweight, and simple way to integrate the PCS-Boom (sold separately) into existing Rycote windshield kits.
Lieferzeit binnen 4 bis 5 Wochen
Table Clamp: For mounting mic arm clamped to a desktop, Easy to hand tighten/release, Sturdy construction
Cyclone Adaptor for PCS-Boom w/ XLR holder - (Fits Cyclone Windshield Kits). The Cyclone Adapter for PCS-Boom from Rycote is an adapter that provides a neat, lightweight, and simple way to integrate the PCS-Boom (sold separately) into existing Rycote windshield kits.
Lieferzeit binnen 4 bis 5 Wochen
MHR Adaptor
Lieferzeit binnen 4 bis 5 Wochen
3/8" Boom Adaptor Swivel
Lieferzeit binnen 4 bis 5 Wochen
Boom Adaptor with Lever & XLR Holder MkIII
Lieferzeit binnen 4 bis 5 Wochen
The Professional Connection System ('PCS') is the ingenious new quick attachment/quick release connection system from Rycote.
Lieferzeit binnen 4 bis 5 Wochen
Single Duo-Lyre 72 (19/34) (with stereo risers)
Lieferzeit binnen 4 bis 5 Wochen
Single Duo-Lyre 68 (19/34) (with stereo risers)
Lieferzeit binnen 4 bis 5 Wochen
The pair of 3/8"-16 Tips for PCS-Boom Adapter from Rycote are quick release tips that allow PCS connectivity with any 3/8"-16 female threaded shockmount or windshield kit (sold separately).
Lieferzeit binnen 4 bis 5 Wochen
The 11.8" Rycote Microphone Protector Case is a water-resistant cylindrical case designed to provide multi-layered protection of several small-diaphragm microphones for boom operators and production sound recordists in ENG, EFP, television production, and film shoots.
Lieferzeit binnen 4 bis 5 Wochen
Nano-Shield 19/21 Lyre 55-Shore (Pair)
Lieferzeit binnen 4 bis 5 Wochen
Nano-Shield 22/25 Lyre 72-Shore (Pair)
Lieferzeit binnen 4 bis 5 Wochen
Nano-Shield 19/21 Lyre 62-Shore (Pair)
Lieferzeit binnen 4 bis 5 Wochen
Nano-Shield 22/25 Lyre 68-Shore (Pair)
Lieferzeit binnen 4 bis 5 Wochen
Nano-Shield 22/25 Lyre 62-Shore (Pair)
Lieferzeit binnen 4 bis 5 Wochen
Cable Clamp for Monitor Arm and Microphone Arm (10 cps)
The 7.9" Rycote Microphone Protector Case is a water-resistant cylindrical case designed to provide multi-layered protection of several small-diaphragm microphones for boom operators and production sound recordists in ENG, EFP, television production, and film shoots.
Lieferzeit binnen 4 bis 5 Wochen
3/8"F to 1/4" ThreAD / Hot Shoe Adaptor
Lieferzeit binnen 4 bis 5 Wochen
InVision Table Stand
Lieferzeit binnen 4 bis 5 Wochen
Table-mounted socket for MZH goosenecks, 5 pole XLR-F, black
20 cm Hot Shoe Extension
Lieferzeit binnen 4 bis 5 Wochen
The DPA STC4099 Saxophone Mounting Clip is designed to mount the DPA 4099 onto saxophones, trumpets, clarinets, etc.
The UC4099 Universal Clip from DPA Microphones is a spare or replacement mounting system for a DPA 4099U universal clip microphone, it's identical to the original clip that comes with the mic system.
The DPA Microphones SM4000-C Suspension Mount is designed for compact, reference standard microphones with an MMP-C pre-amplifier. This mount allows the microphone to hang from its cable and then be oriented in any direction desired by bending the holder.
The PC4099 Magnet Mount from DPA Microphones is a spare or replacement magnetic mount for DPA 4099P stereo microphone system. It is identical to the magnetic mounts that come with the original package, and can be used with various instruments with magnetic surfaces.
The DPA VC4099 Violin Mounting Clip is designed to mount the DPA 4099 onto violins, mandolins, banjos, etc.
Cable Clamp for Monitor Arm Polybag, Pack of 10
The DC4099 Mounting Clip from DPA Microphones is a spare or replacement clip that allows you to attach a DPA Microphones 4099D clip microphone to drums or various percussion instruments.
The DPA CM4099 clamp mount lets you easily clip your d:vote 4099 microphone on saxophones, brass instruments, and a variety of other instruments.
The DPA Microphones Mounting Clip is designed to fit a DPA 4099C Clip Microphone for Cello. It is interchangeable with other DPA 4099 series instrument microphones. The clip holds the mic to the instrument.
Instrument Mic Mounting Clip for Double Bass
Accordian Clip for d:vote 4099 Microphone
Clip for Guitar
Microphone drum clamp for attaching the e 908 or the e 608 to a drum. Clamp is an included accessory of the e 908 D.
Microphone horn clamp for attaching the e 908 or the e 608 to the bell of a brass instrument. Clamp is an included accessory of the e 908 B.
Camera Clamp Adaptor only
Lieferzeit binnen 4 bis 5 Wochen
Pair of Single Lyre 82 (30) (with modular adaptor & screws)
Lieferzeit binnen 4 bis 5 Wochen
Pair of Single Lyre 62 (19/25) (with premodular adaptor & screws)
Lieferzeit binnen 4 bis 5 Wochen
Pair of Single Lyre 62 (19/25) (with modular adaptor & screws)
Lieferzeit binnen 4 bis 5 Wochen
Cable Clamp for MMS System Pole Polybag. Pack of 6
Yellow Spacer. Pack of 10
Replacement Filler Strip 40mm
Lieferzeit binnen 4 bis 5 Wochen
Replacement Filler Strip 120mm
Lieferzeit binnen 4 bis 5 Wochen
Replacement Filler Strip 180mm
Lieferzeit binnen 4 bis 5 Wochen
Replacement Filler Strip 240mm
Lieferzeit binnen 4 bis 5 Wochen
Replacement Filler Strip 105mm
Lieferzeit binnen 4 bis 5 Wochen
Replacement Lyres, 416 Windshield Kit
Lieferzeit binnen 4 bis 5 Wochen
Replacement XX Small Modular Bar
Lieferzeit binnen 4 bis 5 Wochen
The MZT 30 is a flush mount with XLR-3 socket which can be used in combination with the XLR-3 goosenecks MZH 3015, MZH 3040 and MZH 3042.
Boom Adaptor with Lever
Lieferzeit binnen 4 bis 5 Wochen
3/8"F to 1/4"M ThreAD Adaptor
Lieferzeit binnen 4 bis 5 Wochen
1/4" InVision Video Adaptor
Lieferzeit binnen 4 bis 5 Wochen
The R?DE Pivot Adaptor is a durable machined-aluminium, brass and high-grade polymer adaptor for mounting on boom stands and boompoles, allowing for up to 210 degrees of pivot. A 5/8" to 3/8" adaptor is included.
Litt Mounting Flange - Mounts riser to a desktop
Litt Mounting Flange - Mounts riser to a desktop
Plastic Sleeve for Mika. Pack of 10
Back-to-Back Clips
Lieferzeit binnen 4 bis 5 Wochen
Camera Clamp / Shoe Adaptor
Lieferzeit binnen 4 bis 5 Wochen
Brass Shoe Adaptor with 1/4-inch male thread
Lieferzeit binnen 4 bis 5 Wochen
Pop Filter Spare Foam (pack of 5)
Lieferzeit binnen 4 bis 5 Wochen
The set of three Rycote Microphone Twist Tubes offers protection and simplified transport of multiple small-diaphragm microphones for boom operators and production sound recordists in ENG, EFP, television production, and film shoots.
Lieferzeit binnen 4 bis 5 Wochen
This Rode Universal Blimp Mount Adapter is a lightweight mounting adapter for the Rode Blimp windshield shock mounting system. The adapter allows for quick and easy mounting onto boompoles, stands, handgrips and other 3/8" thread mounting devices. The Universal Blimp Mount is a lightweight, easily interchangeable alternative to grip handles.
Ratchet Lever
Lieferzeit binnen 4 bis 5 Wochen
3/8 inches Male to 5/8 inches Female Screw Adaptor
Lieferzeit binnen 4 bis 5 Wochen
INV-Lite Upgrade Pack
Lieferzeit binnen 4 bis 5 Wochen
Replacement Bands for Microphone Shock Mount (Set of 4).
Lieferzeit binnen 8 bis 12 Wochen
Yellow Spacer
Cable Clamp for Monitor/Mic Arm
Plastic Sleeve for Mika