Max 4G Replacement Microphone Cover
7 Stück auf Lager
UltraLITE Replacement Ear Pad x2
46 Stück auf Lager
2 Port AC Adapter
10 Stück auf Lager
Comstar Headset Lithium Battery
4 Stück auf Lager
TeamConnect Ceiling 2, ceiling microphone, beamforming technology, with two Dante output and one analog output, PoE power supply
TeamConnect Ceiling 2, ceiling microphone, beamforming technology, with two Dante outputs and one analog output, PoE powered, black
The Sennheiser SL MCR 2 DW is a 2-channel wireless receiver compatible with SpeechLine Digital Wireless Series.
The presenter mixer system allows on-air presenters to adjust the audio levels fed to their radio or wired IEM systems, whilst also allowing Sound Control Room operators to adjust the levels remotely.
Two-channel SpeechLine Digital Wireless receiver. Analog outputs and (2) Dante interfaces and PoE power supply
Power Supply for 60pcs Belt Pack (Universal/110-220v)
C-MOD Two Channel Base Station
Omnidirectional antenna (360°H x 25°V) Out
Table stand including gooseneck
200' Extension Cable for HUB with 3.5mm Male TRRS to Female TRRS
EVADE C-MOD Interface for PortaCom
EVADE C-MOD Interface for RTS
C-MOD Interface for Blackmagic
EVADE C-MOD Interface for Telex
This device will act as the main control unit for all the devices connected to the cue light channel. Cue light systems tipically consist of an emitor and one or several receivers that will display a few light indications (usually red/green) activated from the main control unit.
Intercom System, Power Supply
1- UltraPAK, 1-Max 4G Double & 1-Battery
Interface for HUB - ClearCom
Interface for HUB - RTS
Interface for HUB - Telex
1- UltraPAK, 1-Max 4G Single & 1-Battery
The Altair ER-200 is the new Cue Light system's new light indicator receiver. It is suitable for applications that require precise coordination between different professionals. This independent Cue Light receiver connects to the EC-200 master panel, receiving power for operation through the signal cable itself.
100' Extension Cable for HUB with 3.5mm Male TRRS to Female TRRS
1- UltraPAK, 1-Monarch & 1- Battery
Directional antenna 85°H x 65°V (-3dB)
Intercom Flasher
Belt pack is made of sturdy aluminum alloy housing making it much durable in touring.
1- UltraPAK, 1-Cyber & 1- Battery
Intercom System, Headsets (Double Muff)
1- UltraPAK, 1-Edge Headset & 1-Battery
Intercom System, Headsets (Single Muff)
50' Extension Cable for HUB with 3.5mm Male TRRS to Female TRRS
This Floor Cable for EasyCom from Eartec is a 100' floor cable designed for use with an EasyCom intercom system. It has a 3-pin XLR male connector on one end, and a 3-pin XLR female connector on the other.
Extend ITC-300 cables to 200 meters. The standard Ethernet cables between ITC-300 and ITC-300SL (beltpack) can reach up to 100 meters. VP-300R extends that distance to 200 meters whilst being a passive device
Lieferzeit binnen 3 bis 4 Wochen
Antenna cable splitter
The TCSSP3 Splitter Cable from Eartec is a high-quality splitter cable intended for use with a TCS intercom system. It features a female XLR connector on one end, and two male XLR connectors on the other.
Soft case for beltpack series 210
9-Port Multi-Charger with European Plug Adapter
A DC Power Supply for AVN Range, 4 pin XLR socket, 60W for use with AVN-CU2-DANTE and AVN-CU4-DANTE Commentator Units.
DC Power Supply for AVN Range, 60W
Wall mounting bracket for SpeechLine Digital Wireless multichannel receiver
Soft case for beltpack series 200
Antenna support for 1 or 2 antennas
Optional Mounting kit to install 1 or 2 x ES-203CL / ES-201 in a 2 RU space
The Eartec FC50 is a high-quality interconnect cable designed to go from a TCX hybrid intercom to a BP-101 beltpack. It has male and female four-pin XLR connectors.
32 Ohm, right angle mono plug
Lieferzeit binnen 4 Wochen
This Floor Cable for EasyCom from Eartec is a 25' floor cable designed for use with an EasyCom intercom system. It has a 3-pin XLR male connector on one end, and a 3-pin XLR female connector on the other.
Presenter Controller Mic Mount Bracket
HUB 3.5mm TRRS Cable
AVN-TB6 Talkback Intercom 19" Rack Plates
Convert your pair of NTH-100 headphones into a headset with the NTH-Mic Detachable Boom Microphone from Rode and get clear, intelligible, broadcast-ready voice quality for media, content creation, streaming, and gaming. The mic plugs directly into the 3.5mm jack on the earcup and features a 4.8" boom to precisely situate the omnidirectional...
One Set of Custom Button CAPS Printed
Sonifex Desk Mount Bracket is designed for AVN-MPPR Presenter Controller.
Wireless intercom base station antenna
The PS-200 power supply can be mounted with an optional blank ear panels OR-1-200 set for rack installation. They are installed w ith the same PS-200 top cover screws.
Rechargeable 3.7 Volt Lithium Polymer Battery
HUB Interlink Cable
1U Pannel to seize 4 Interfaces/Beltpacks
Tool for Replacing Button Caps
All of the Passive Packs, along with the CM-TBU and CM-TLL, can be mounted to the underside of a desk using the CM-MNT1 desk mount plate.
Speaker 32 Ohm
Lieferzeit binnen 4 Wochen
Speaker 125 Ohm
Lieferzeit binnen 4 Wochen
Cyber Replacement Microphone Cover
ComStar Replacement Microphone Cover
UltraLite Cloth Replacement Ear Pad (Bag of 2)
SST Replacement Clear Ear Tubes
12 Volt vehicle adapter for 8 Port Multi Charging Base
12 Volt vehicle adapter for Mini HUB & 2 Port Multi Charging Base
10 Port AC Adapter
C-MOD Interlink Cable
This Power Adapter for EVADE 9-Bay Charger with a European-power plug is made specifically to work in Europe.
USB Charging Cable for HUB Mini Base & 2-Port
UltraLite Foam Replacement Ear Pad (Bag of 2)
8 Port AC Adapter
HUB AC Adapter
Ultra Replacement "Left" Ear Pad
Ultra Replacement "Right" Ear Pad
ComStar Oval Replacement Ear Pad (Bag of 2)
Xtreme Replacement Ear Pad (Left Ear)
Xtreme Replacement Ear Pad (Right Ear)
UltraLite Replacement Headband Pad
UltraLite Off-Ear Neoprene Pad
Monarch Replacement Ear Pads (Pack of 10)
HUB Replacement Belt Clip
Lanyard for UltraLITE Headset 28" Long