Shure KSM9HS - Microphone, Black

1023670

Neu

Multi-Pattern Dual-Diaphragm Handheld Vocal Microphone

Visuals Preis :

556,00 CHF


 

Lieferzeit unter 3 Wochen

- +

1023670
GARANTIE 12 MOIS
Mehr Infos  

Shure Microphone, Black


Fashioned in a sleek black finish, the KSM9HS Multi-Pattern Dual-Diaphragm Handheld Vocal Microphone from Shure is designed to function both in live and studio environments. It features a polar pattern switchable between subcardioid and hypercardioid, with the former providing a wider coverage than the latter, though neither pattern strays into the realm of the omnidirectional. Its dual-diaphragm construction is intended to mitigate the proximity effect; with the KSM9HS, you should hear minimal differences in frequency response whether you're up close or far away from its capsule.


The microphone necessitates phantom power, but can operate with phantom supplies as low as 11 VDC. Its inherent SPL and output clipping level render it suitable for loud sound sources, while its integrated three-layer mesh pop filter diminishes breath and wind noises. A carrying case and microphone clip are included with the KSM9HS.


Features


- Switchable polar patterns (hypercardioid and subcardioid)


- Uniform polar response


- Dual gold-layered, low-mass Mylar diaphragm design


- Gold-plated internal and external connectors


- Class A, discrete, transformerless preamplifier provides transparency and fast transient response while simultaneously mitigating crossover distortion, and minimizing harmonic and intermodulation distortion


- Minimal self-noise


- Able to withstand high SPLs


- High output level


- Suspension shockmount system isolates cartridge from handling and stand noise


- Subsonic filter eliminates rumble from mechanical vibration below 17 Hz


- Integrated three-stage 'pop' protection grill to reduce plosives, wind, and other breath noises

 


 



Specifications



 



Cartridge Type



Condenser (Electret Biased)



Frequency Response



50 Hz to 20 kHz



Polar Pattern



Hypercardioid, Subcardioid (selectable)



Output Impedance



145 Ohms



Sensitivity



At 1 kHz (typical):

Hypercardioid: -50.5 dBV/Pa (2.99 mV)

 Subcardioid: -53.0 dBV/Pa (2.24 mV)



Maximum SPL



1 kHz at 1% THD:

 Hypercardioid:

150.8 dB, 2500 Ohm load

150.9 dB, 1000 Ohm load


Subcardioid:


153.0 dB, 2500 Ohm load


153.1 dB, 1000 Ohm load



Signal to Noise Ratio



Hypercardioid: 73.3 dB

 Subcardioid: 71.3 dB



Dynamic Range



1 kHz at 1% THD:

 Hypercardioid: 

130.8 dB, 2500 Ohm load  

130.1 dB, 1000 Ohm load


Subcardioid: 


131.3 dB, 2500 Ohm load


130.6 dB, 1000 Ohm load



Common Mode Rejection



20 Hz to 8 kHz ≥ 60 dB



Phantom Power



48 ± 4 VDC (IEC-268-15/DIN 45 596), positive pins 2 and 3



Current Drain



5.2 mA typical at 48 VDC



Self Noise



Equivalent SPL, A-weighted (typical): Hypercardioid: 20.7 dB


Subcardioid: 22.7 dB



Clipping Level



20 Hz to 20 kHz:

 7.0 dBV, 2500 Ohm load


6.4 dBV, 1000 Ohm load



Polarity



Positive pressure on front diaphragm produces positive voltage on output pin 2 relative to pin 3



Power Requirements



11 to 52 VDC phantom power (IEC-61938), 5.4 mA, typical



Connector



1x 3-pin XLR male, balanced



Weight



10.6 oz (300 g)



 


    Hilfe,
    Finanzierung,
    Rufen Sie uns an!

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menü