Tascam iXR - Audio-/MIDI-Interface for iPad / PC / Mac

1001744

Neu

Uniquely designed to bring mobile devices into the world of professional audio, the iXR is a...
Mehr lesen

Visuals Preis :

227,00 CHF


 

Lieferzeit binnen 1 bis 2 Wochen

- +

1001744
GARANTIE 12 MOIS
Mehr Infos  

Tascam iXR USB Audio/MIDI Interface With iOS Connectivity




While also compatible with Mac and Windows systems, the iXR from Tascam is a portable audio/MIDI USB interface primarily designed for recording to your iPhone and iPad at resolutions up to 24-bit/96 kHz. It is MFi-certified and connects to your iOS devices via standard USB to Lightning or 30-pin cables without the need for an adapter.


There are few controls, and use is simple. The unit features two Ultra-HDDA mic preamps with phantom power, two direct inputs for your guitar or bass, two line inputs for your keyboards, and MIDI in/out connectors. To avoid latency, the monitor knob on the front panel allows for monitoring what is being recorded without the signal going through the computer or iOS device.


The two balanced stereo outputs let you connect your iOS device to a concert sound system, or to powered speakers. Furthermore, the unit can operate in stand-alone mode when you want to practice an instrument without recording it.


Built from rolled aluminum, the rugged body features a slim design with guards to protect the front jacks, allowing you to safely carry this unit wherever you want to record.


The iXR comes bundled with Cubasis LE multitrack recording app for iOS, and Cubase LE for Mac and Windows.


- High-resolution recording formats up to 24-bit/96 kHz


- MFi-certified for direct connection with iOS devices using Lightning to USB cable (available separately)


- Slim, rolled-aluminum body with Kensington lock port and protective guards


- Two Ultra-HDDA (High Definition Discrete Architecture) mic preamps


- Balanced XLR/TRS input jacks with +48V phantom power


- Input-gain range of 57 dB for dynamic and condenser microphones


- Supports direct guitar input


- Offers multiple power options: USB charger, mobile battery with micro-USB output, or USB bus power from computer


- Will operate in stand-alone mode when you want to hear a mic or instrument without recording it


- Monitor knob on the front panel for zero-latency monitoring


- Headphone-output mini jack with dedicated volume knob


- Two balanced TRS output jacks for connection to powered monitors


- MIDI input & output enable connection to keyboards and other MIDI devices


- Supports Windows (ASIO/WDM) and Mac (Core Audio)


- Compliant with USB Audio 2.0


- Compatible with most major DAW software


- Firmware can be updated from iOS device


- Bundled with Cubase LE for Mac & Windows, and Cubasis LE for iOS


 



Specifications



 



Audio Resoluton



 



Sample Frequency



44.1, 48, 88.2, 96 kHz



Bit Depth



16-/ 24-bit



Microphone Inputs



 



Connectors



2 x XLR-3-31 equivalent / 1:Gnd, 2:Hot, 3:Cold / balanced



Preamps



2 x Ultra-HDDA (High Definition Discrete Architecture)



Input Impedance



2.2 kOhms



Nominal Input Level



Gain Knob at Max: -65 dBu / 0.0004 Vrms

Gain Knob at Min: -8 dBu / 0.3090 Vrms



Maximum Input Level



+ 8 dBu / 1.9467 Vrms



Gain



57 dB



Instrument Inputs



 



Connectors



2 x 1/4" (6.3 mm) TS jacks / T:Hot, S:Gnd / unbalanced



Input Impedance



1 MOhm or more



Nominal Input Level



Gain Knob at Max: -63 dBv / 0.0007 Vrms

Gain Knob at Min: -6 dBv / 0.5015 Vrms



Maximum Input Level



+10 dBV / 3.162 Vrms



Gain



57 dB



Line Inputs



 



Connectors



2 x 1/4" (6.3 mm) TRS jacks / T:Hot, R:Cold, S:Gnd / balanced 

(when set to Line at Line/Inst switch)



Input Impedance



110 Ohms



Nominal Input Level



Gain Knob at Max: -53 dBu / 0.0017 Vrms

Gain Knob at Min: +4 dBu / 1.228 Vrms



Maximum Input Level



+20 dBu / 7.75 Vrms



Gain



57 dB



Analog Audio Outputs



Connectors



2 x 1/4" (6.3 mm) TRS jacks / T:Hot, R:Cold, S:Gnd / balanced



Output Impedance



110 Ohms



Nominal Output Level



+4 dBu / 1.273 Vrms



Maximum Output Level



+20 dBu / 7.75 Vrms



Headphones



 



Connector



1/8" (3.5mm) stereo-mini jack



Maximum Output Level



18 mW + 18 mW or higher



THD+N



0.1% or less, 32 Ohms loaded



Audio Performance



 



Mic Preamps



Equivalent Input Noise (EIN): -125 dBu or less / 150-Ohm termination, gain knob at max



Frequency Response



44.1 / 48 kHz:

0 dB / -0.4 dB at 20 Hz (JEITA)

0 dB / -0.1 dB at 20 kHz (JEITA)

0 dB / -0.5 dB at 20 kHz (HP output, JEITA)



88.2 / 96 kHz:

0 dB / -0.4 dB at 20 Hz (JEITA)

0 dB / -0.25 dB at 40 kHz (JEITA)

0 dB / -2.0 dB at 40 kHz (HP output, JEITA)



S/N Ratio



101 dB or higher, Mic/Line input to Line out, gain knob at minimum, JEITA



Distortion



0.0025% or less, Mic/Line input to Line out, 1 kHz, at nominal input level and maximum output level, JEITA



Crosstalk



95 dB or more, Mic/Line input to Line out, 1 kHz, JEITA



Control Input/Output Ratings



MIDI In/Out



Connectors: 5-pin DIN 

Format: Standard



Windows/Mac/Power Port



Connector: 4-pin USB B-type

Transfer Rate: USB 2.0 high-speed, 480 Mbps



USB Port



Connector: USB A-type

Transfer Rate: USB 2.0 high-speed, 480 Mbps



System Requirements



MIDI In/Out



Connectors: 5-pin DIN 

Format: Standard



Windows/Mac/Power Port



Connector: 4-pin USB B-type

Transfer Rate: USB 2.0 high-speed, 480 Mbps



USB Port



Connector: USB A-type

Transfer Rate: USB 2.0 high-speed, 480 Mbps



Power



 



Requirements



Used with Computer: USB bus power 

Used with iOS Device: Needs USB power adapter, 5 V, 700 mA (available separately)



Power Consumption



2.5 W



General



 



Operating Temperature



41 to 95° F (5 to 35° C)



Dimensions (W × H × D)



8.26 x 1.38 x 5.53" (210 x 35.3 x 140.7 mm), excluding protrusions



Weight



1.45 lb (660 g)





    Hilfe,
    Finanzierung,
    Rufen Sie uns an!

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menü